Search

Limited efficiency, lower durability, moisture absorbance, and pest/fungal/bacterial interaction/growth are the major issues relating to porous nonwovens used for acoustic and thermal insulation in buildings. This research investigated porous nonwoven textiles composed of recycled cotton waste (CW) fibers, with a specific emphasis on the above-mentioned problems using the treatment of silicon coating and formation of nanofibers via facile-solution processing. The findings revealed that the use of an economic and eco-friendly superhydrophobic (contact angle higher than 150°) modification of porous nonwovens with silicon nanofibers significantly enhanced their intrinsic characteristics. Notable improvements in their compactness/density and a substantial change in micro porosity were observed after a nanofiber network was formed on the nonwoven material. This optimized sample exhibited a superior performance in terms of stiffness, surpassing the untreated samples by 25–60%. Additionally, an significant enhancement in tear strength was observed, surpassing the untreated samples with an impressive margin of 70–90%. Moreover, the nanofibrous network of silicon fibers on cotton waste (CW) showed significant augmentation in heat resistance ranging from 7% to 24% and remarkable sound absorption capabilities. In terms of sound absorption, the samples exhibited a performance comparable to the commercial standard material and outperformed the untreated samples by 20% to 35%. Enhancing the micro-roughness of fabric via silicon nanofibers induced an efficient resistance to water absorption and led to the development of inherent self-cleaning characteristics. The antibacterial capabilities observed in the optimized sample were due to its superhydrophobic nature. These characteristics suggest that the proposed nano fiber-treated nonwoven fabric is ideal for multifunctional applications, having features like enhanced moisture resistance, pest resistance, thermal insulation, and sound absorption which are essential for wall covers in housing. [ABSTRACT FROM AUTHOR]

Compression stockings/socks are one of the most essential materials to treat vascular disorders in veins. However, the comfort of wearing such stockings over prolonged period of time is a major problem. There is limited research in the area of comfort optimization while retaining the compressional performance. The current work is carried out with an aim to determine the optimum level of the input factors e.g., knitting structure, plaiting yarn linear density and main yarn linear density for achieving desired stretch recovery percentage and thermo-physiological comfort properties of compression socks used in treatment of vascular disorders. Their optimum combination was determined by using Taguchi based techniques for order of preference by similarity to ideal solution i.e., TOPIS. In this study, thickness, areal density, air permeability, thermal resistance, over all moisture management capacity (OMMC), stretch and recovery % were optimized simultaneously by using Taguchi-TOPSIS method. The results showed that linear density of plaiting and main yarn has significant influence on all the comfort related properties for compression stockings/socks. The optimum sample had linear density 20 denier for Lycra covered by 70 denier of nylon 66 in the plaiting yarn. It also suggested 120 denier nylon 66 in the main yarn knitted into a plain single jersey structure. The percentage contribution of the factors i.e., structure, plaiting yarn linear density and main yarn linear density was obtained by using ANOVA which are 7%, 31% and 42% respectively. It is worth mentioning that in case of compression stockings, the main yarn linear density has more significant effect on comfort properties as compared to other independent parameters. The results were verified by experiment, and the accuracy was relatively high (maximum error 8.533%). This study helped to select suitable knit structure with the change of linear densities of plaiting yarn and main yarn for comfortable compression stocking/sock and will fulfill the potential requirement for treatment of venous/vascular disorders. The novel methodology involving TOPSIS method helped in analyzing the cumulative contribution of the input parameters to achieve optimum compression as well as comfort performance. This modern approach is based on contemporary scientific principles and statistical approximations. This study may provide benchmark solutions to complex problems involving multiple interdependent criteria. [ABSTRACT FROM AUTHOR]

For a sustainable environment and to tackle the pollution problem, industrial wastes can be used in concrete composite materials. This is especially beneficial in places prone to earth quack and lower temperature. In this study, five different types of waste fibres such as polyester waste, rubber waste, rock wool waste, glass fibre waste and coconut fibre waste were used as an additive in 0.5% 1%, and 1.5% by mass in concrete mix. Seismic performance related properties of the samples were examined through evaluation of compressive strength, flexural strength, impact strength, split tensile strength, and thermal conductivity. Results showed that, impact strength of the concrete significantly improved by the addition of fibre reinforcement in concrete. Split tensile strength and flexural strength were significantly reduced. Thermal conductivity was also influenced by addition of polymeric fibrous waste. Microscopic analysis was performed to examine the fractured surfaces. In order to get the optimum mix ratio, multi response optimization technique was used to determine the desired level of impact strength at an acceptable level of other properties. Rubber waste was found to be the most attractive option followed by coconut fibre waste for the seismic application of concrete. The significance and percentage contribution of each factor was obtained by Analysis of variance ANOVA (α = 0.05) and pie chart which showed that Factor A (waste fibre type) is the main contributor. Confirmatory test was done on optimized waste material and their percentage. The order preference similarity to ideal solution (TOPSIS) technique was used for developed samples to obtain solution (sample) which is closest to ideal as per given weightage and preference for the decision making. The confirmatory test gives satisfactory results with error of 6.68%. Cost of reference sample and waste rubber reinforced concrete sample was estimated, which showed that 8% higher volume was achieved with waste fibre reinforced concrete at approximately same cost as pure concrete. Concrete reinforced with recycled fibre content is potentially beneficial in terms of minimizing resource depletion and waste. The addition of polymeric fibre waste in concrete composite not only improves seismic performance related properties but also reduces the environmental pollution from waste material which has no other end use. [ABSTRACT FROM AUTHOR]

For a sustainable environment and to tackle the pollution problem, industrial wastes can be used in concrete composite materials. This is especially beneficial in places prone to earth quack and lower temperature. In this study, five different types of waste fibres such as polyester waste, rubber waste, rock wool waste, glass fibre waste and coconut fibre waste were used as an additive in 0.5% 1%, and 1.5% by mass in concrete mix. Seismic performance related properties of the samples were examined through evaluation of compressive strength, flexural strength, impact strength, split tensile strength, and thermal conductivity. Results showed that, impact strength of the concrete significantly improved by the addition of fibre reinforcement in concrete. Split tensile strength and flexural strength were significantly reduced. Thermal conductivity was also influenced by addition of polymeric fibrous waste. Microscopic analysis was performed to examine the fractured surfaces. In order to get the optimum mix ratio, multi response optimization technique was used to determine the desired level of impact strength at an acceptable level of other properties. Rubber waste was found to be the most attractive option followed by coconut fibre waste for the seismic application of concrete. The significance and percentage contribution of each factor was obtained by Analysis of variance ANOVA (α = 0.05) and pie chart which showed that Factor A (waste fibre type) is the main contributor. Confirmatory test was done on optimized waste material and their percentage. The order preference similarity to ideal solution (TOPSIS) technique was used for developed samples to obtain solution (sample) which is closest to ideal as per given weightage and preference for the decision making. The confirmatory test gives satisfactory results with error of 6.68%. Cost of reference sample and waste rubber reinforced concrete sample was estimated, which showed that 8% higher volume was achieved with waste fibre reinforced concrete at approximately same cost as pure concrete. Concrete reinforced with recycled fibre content is potentially beneficial in terms of minimizing resource depletion and waste. The addition of polymeric fibre waste in concrete composite not only improves seismic performance related properties but also reduces the environmental pollution from waste material which has no other end use. [ABSTRACT FROM AUTHOR]

This paper focuses on the comfort properties of graduated and preventive compression stockings for people who work long hours in standing postures and for athletes for proper blood circulation. The present study was conducted in order to investigate the effects of the yarn insertion density and inlaid stitches on the performance of the compression stockings. The effects of these parameters on the thermo-physiological comfort properties were tested with standard and developed methods of testing. All compression stockings were maintained with class 1 pressure as per German standards. The structural parameters of the knitted fabric structures were investigated. The stretching and recovery properties were also investigated to determine the performance properties. The theoretical pressure was predicated using the Laplace's law by testing the stockings' tensile properties. The compression interface pressures of all stockings were also investigated using a medical stocking tester (MST) from Salzmann AG, St. Gallen, Switzerland. Correlation between the theoretical pressures and pressures measured using the MST system were also assessed. The current research used a multi-response optimization technique, i.e., principal component analysis (PCA), to identify the best structure based on the optimalization of the above-mentioned properties. The results also revealed that samples with higher insertion density levels exhibit better comfort properties. The results showed that sample R1 was the best sample, followed by R2 and P. In addition, all developed stocking samples exhibited better comfort properties than the control sample from the market. [ABSTRACT FROM AUTHOR]

Correction to: I Scientific Reports i https://doi.org/10.1038/s41598-023-35495-9, published online 21 May 2023 The original version of this Article contained an error in the spelling of the author Husnain Ali which was incorrectly given as Husain Ali. The original article can be found online at https://doi.org/10.1038/s41598-023-35495-9. [Extracted from the article]