Search

The electrode is a key component in a microbial electrolysis cell (MEC) that needs significant improvement for practical implementation. Accurate and reproducible analytical methods are substantial for the effective development of electrode technology. Linear sweep voltammetry (LSV) is an essential analytical method for evaluating electrode performance. In this study, inoculated carbon brush (IB), abiotic brush (AB), Pt wire (PtW), stainless steel wire (SSW), and mesh (SSM) were tested to find the most suitable counter electrode under different medium conditions. The coefficient of variation (Cv) of maximum current (Imax) was the most decisive indicator of the reproducibility test. This study shows that (i) the electrode used in operation is an appropriate counter electrode in an acetate-added condition, (ii) the anode LSV test should avoid the use of Pt wire as counter electrodes, and (iii) PtW is an appropriate counter electrode in cathode LSV in all conditions. [ABSTRACT FROM AUTHOR]

The UNIfied Partitioning-Aerosol phase Reaction (UNIPAR) model was integrated into the Comprehensive Air quality Model with extensions (CAMx) to process secondary organic aerosol (SOA) formation by capturing multiphase reactions of hydrocarbons (HCs) in regional scales. SOA growth was simulated using a wide range of anthropogenic HCs, including 10 aromatics and linear alkanes with different carbon lengths. The atmospheric processes of biogenic HCs (isoprene, terpenes, and sesquiterpene) were simulated for major oxidation paths (ozone, OH radicals, and nitrate radicals) to predict day and night SOA formation. The UNIPAR model streamlined the multiphase partitioning of the lumping species originating from semi-explicitly predicted gas products and their heterogeneous chemistry to form non-volatile oligomeric species in both organic aerosol and inorganic aqueous phase. The CAMx–UNIPAR model predicted SOA formation at four ground urban sites (San Jose, Sacramento, Fresno, and Bakersfield) in California, United States, during wintertime 2018. Overall, the simulated mass concentrations of the total organic matter, consisting of primary organic aerosol and SOA, showed a good agreement with the observations. The simulated SOA mass in the urban areas of California was predominated by alkane and terpene oxidation products. During the daytime, low-volatility products originating from the autoxidation of long-chain alkanes considerably contributed to the SOA mass. In contrast, a significant amount of nighttime SOA was produced by the reaction of terpene with ozone or nitrate radicals. The spatial distributions of anthropogenic SOA associated with aromatic and alkane HCs were noticeably affected by the southward wind direction, owing to the relatively long lifetime of their atmospheric oxidation, whereas those of biogenic SOA were nearly insensitive to wind direction. During wintertime 2018, the impact of inorganic aerosol hygroscopicity on the total SOA budget was not evident because of the small contribution of aromatic and isoprene products, which are hydrophilic and reactive in the inorganic aqueous phase. However, an increased isoprene SOA mass was predicted during the wet periods, although its contribution to the total SOA was little. [ABSTRACT FROM AUTHOR]

Photochemical grid models are being used in technical analyses by the Visibility Improvement State and Tribal Association of the Southeast (VISTAS), a regional air quality planning organization in the southeastern United States, to support state implementation plans for regional haze and related air quality issues. VISTAS has embarked on a multi-phase process of testing and evaluating regional meteorological, emissions and air quality models that will be used to project visibility improvements as required by the regional haze rule. VISTAS has generated 2002 annual emissions and meteorological inputs for two photochemical grid models, the community multi-scale air quality (CMAQ) and the comprehensive air-quality model with extensions (CAMx), at a 36 km resolution for the continental US and at 12 km resolution for the eastern US. The two models were evaluated using speciated PM measurements from various monitoring networks and detailed analysis was performed for organic carbon (OC) mass using the IMPROVE, STN, and SEARCH networks. The differences in model performance between CMAQ and CAMx were used as a diagnostic tool to investigate performance issues for several compounds. CAMx performed substantially better than CMAQ for OC (defined as 1.4×measured organic carbon) which led to investigations into methods for improving the CMAQ OC model performance. The treatment of secondary organic aerosol (SOA) was identified as an area needing improvements in both models. The impact of replacing the CMAQ SOA parameters with those from CAMx was investigated. Further analysis identified several processes that are potentially important for SOA formation that are not treated in either model including, polymerization of the SOA into non-volatile particles and SOA formation from sesquiterpene, isoprene and other biogenic VOCs. A prototype mechanism for several of these missing processes was developed and the CMAQ SOA module was enhanced to include these SOA formation processes. SOA yields, specifically from biogenic emissions, were increased by the modified SOA module and CMAQ model performance for particulate OC at the IMPROVE, SEARCH, and STN sites in the VISTAS region was improved. © 2006 Elsevier Ltd. All rights reserved.

The UNIfied Partitioning-Aerosol phase Reaction (UNIPAR) model was established on the Comprehensive Air quality Model with extensions (CAMx) to process Secondary Organic Aerosol (SOA) formation by capturing multiphase reactions of hydrocarbons (HCs) in regional scales. SOA growth was simulated using a wide range of anthropogenic HCs including ten aromatics and linear alkanes with different carbon-lengths. The atmospheric processes of biogenic HCs (isoprene, terpenes, and sesquiterpene) were simulated for the major oxidation paths (ozone, OH radicals, and nitrate radicals) to predict day and night SOA formation. The UNIPAR model streamlined the multiphase partitioning of the lumping species originating from semi-explicitly predicted gas products and their heterogeneous chemistry to form non-volatile oligomeric species in both organic aerosol and inorganic aqueous phase. The CAMx-UNIPAR model predicted SOA formation at four ground urban sites (San Jose, Sacramento, Fresno, and Bakersfield) in California, United States during wintertime 2018. Overall, the simulated mass concentrations of the total organic matter, consisting of primary OA (POA) and SOA, showed a good agreement with the observations. The simulated SOA mass in the urban areas of California was predominated by alkane and terpene. During the daytime, low-volatile products originating from the autoxidation of long-chain alkanes considerably contributed to the SOA mass. In contrast, a significant amount of nighttime SOA was produced by the reaction of terpene with ozone or nitrate radicals. The spatial distributions of anthropogenic SOA associated with aromatic and alkane HCs were noticeably affected by the southward wind direction owing to the relatively long lifetime of their atmospheric oxidation, whereas those of biogenic SOA were nearly insensitive to wind direction. During wintertime 2018, the impact of inorganic aerosol hygroscopicity on the total SOA budget was not evident because of the small contribution of aromatic and isoprene products that are hydrophilic and reactive in the inorganic aqueous phase. However, an increased isoprene SOA mass was predicted during the wet periods, although its contribution to the total SOA was little. [ABSTRACT FROM AUTHOR]

ABSTRACT Version 4.10s of the comprehensive air-quality model with extensions (CAMx) photochemical grid model has been developed, which includes two options for representing particulate matter (PM) size distribution: (1) a [...]

Rapid sulfate formation is recognized as a key characteristic of severe winter haze in China. However, air quality models tend to underestimate sulfate formation during heavy haze periods, and heterogeneous formation pathways have been proposed as promising mechanisms to reduce gaps between observation and model simulation. In this study, we implemented a reactive SO2 uptake mechanism through the SO2+NO2 heterogeneous reactions in the Comprehensive Air Quality Model with Extensions (CAMx) to improve simulation of sulfate formation in the Yangtze River Delta (YRD) region. Parameterization of the SO2+NO2 heterogeneous reactions is based on observations in Beijing and considered both the impact of relative humidity and aerosol pH on sulfate formation. Ammonia is reported to be critical for the formation of secondary inorganic aerosols. Estimation of ammonia emissions is usually associated with large uncertainties and models tend to underestimate ammonia concentrations substantially. Sensitivity tests were conducted to evaluate the influence of the SO2+NO2 heterogeneous reactions as well as ammonia emissions on modeled sulfate concentrations during a period with several heavy haze episodes in the YRD region. Base case model results show large underestimation of sulfate concentrations by 36 % under polluted conditions in the YRD region. Adding the SO2+NO2 heterogeneous reactions or doubling ammonia emissions alone leads to slight model improvement (∼6 %) on simulated sulfate concentrations in the YRD region. However, model performance significantly improved when both the SO2+NO2 heterogeneous reactions and doubled ammonia emissions were included in the simulation: predicted sulfate concentrations during polluted periods increased from 23.1 µ g m -3 in the base scenario to 29.1 µ g m -3 (representing an increase of 26 %). Aerosol pH is crucial for the SO2+NO2 heterogeneous reactions, and our calculated aerosol pH is always acidic and increased by 0.7 with doubled ammonia emissions. Modeling results also show that this reactive SO2 uptake mechanism enhanced sulfate simulations by 1 to 5 µ g m -3 for the majority of the eastern and central parts of China, with more than 20 µ g m -3 increase in sulfate concentrations over the northeastern plain. These findings suggest that the SO2+NO2 heterogeneous reactions could be potentially important for sulfate formation in the YRD region as well as other parts of China. Further studies are needed to constrain the uncertainties associated with the parameterization of the SO2+NO2 heterogeneous reactions based on local data as well as to evaluate this mechanism in other regions. In addition, ammonia emissions were found to be a key driving variable of the spatial patterns of sulfate enhancement due to the new pathway. Substantial efforts are needed to improve the accuracy of the ammonia emission inventory. [ABSTRACT FROM AUTHOR]