Search

Tree species identification using optical remote sensing is challenging. Modern digital photogrammetric cameras enable radiometrically quantitative remote sensing and the estimation of reflectance images, in which the observations depend largely on the reflectance properties of targets. Previous research has shown that there are species-specific differences in how the brightness observed changes when the viewing direction in an aerial image is altered. We investigated if accounting for such directional signatures enhances species classification, using atmospherically corrected, real and simulated multispectral Leica ADS40 line-camera data. Canopy in direct and diffuse illumination were differentiated and species-specific variance-covariance structures were analyzed in real reflectance data, using mixed-effects modeling. Species classification simulations aimed at elucidating the level of accuracy that can be achieved by using images of different quality, number and view-illumination geometry. In real data, a substantial variance component was explained by tree effect, which demonstrates that observations from a tree correlate between observation geometries as well as spectrally. Near-infrared band showed the strongest tree effect, while the directionality was weak in that band. The gain from directional signatures was insignificant in real data, while simulations showed a potential gain of 1â3 percentage points in species classification accuracy. The quality of reflectance calibration was found to be important as well as the image acquisition geometry. We conclude that increasing the number of image observations cancels out random observation noise and reflectance calibration errors, but fails to eliminate the tree effect and systematic calibration inaccuracy. Directional reflectance constitutes a marginal improvement in tree species classification.

Tree species identification constitutes a bottleneck in remote sensing-based forest inventory. In passive images the differentiating features overlap and bidirectional reflectance hampers analysis. Airborne LiDAR provides radiometric and geometric information. We examined the single-trees-level response of two LiDAR sensors in over 13 000 forest trees in southern Finland. We focused on the commercially important species. Our aims were to 1) explore the relevant LiDAR features and study their dependencies on stand and tree variables, 2) examine two sensors and their fusion, 3) quantify the gain from intensity normalizations, 4) examine the importance of the size of the training set, and 5) determine the effects of stand age and site fertility. A set of 570 semiurban broad-leaved trees and exotic conifers was analyzed to 6) examine the LiDAR signal in the economically less important species. An accuracy of 88 90% was achieved in the classification of Scots pine, Norway spruce, and birch, using intensity variables. Spruce and birch showed the highest levels of confusion. Downsizing the training set from 30% to 2.5% of all trees had only a marginal effect on the performance of classifiers. The intensity features were dependent on the absolute and relative sizes of trees, especially for birch. The results suggest that leaf size, orientation, and foliage density affect the intensity, which is thus not affected by reflectance only. Some of the ecologically important species in Finland may be separable, since they gave rise to high intensity values. Comparison of the sensors implies that performance of the intensity data for species classification varies between sensors for reasons that remained uncertain. Both range and gain receiver normalization improved species classification. Weighting of the intensity values improved the fusion of two LiDAR datasets.

The potential for combined use of airborne discrete-return LiDAR and digital imagery in the classification and measurement of common seedling stand vegetation was examined in southern Finland (61°50âN, 24°20âE). Classification was based on spectral and textural image features in addition to geometric and radiometric features of the LiDAR. The accuracy of leaf-on, LiDAR-based terrain elevation models was tested as well as the accuracy of LiDAR in the measurement of vegetation heights. LiDAR-based canopy height and the range-normalized intensity of the LiDAR were strong explanatory variables in vegetation classification. Interspecies variation was observed in the height measurement accuracy of LiDAR for different tree, shrub and low vegetation canopies. Elevation models derived with 1â15 pulses per m showed an inherent noise of app. 15â25 cm, which restricts the use of LiDAR in regeneration assessment of very young stands. The spatial pattern of the competing vegetation was reproduced in classification-based raster surfaces, which could be useful in deriving meaningful treatment proposals.2

Intra stand spatial information is often collected in ecological investigations, when functioning or interactions in the ecosystem are studied. Local relative accuracy is often given priority in such cases. Forest maps with accurate absolute positions in a global coordinate system are needed in remote-sensing applications for validation and calibration purposes. Establishing the absolute position is particularly difficult under a canopy as is creating undistorted coordinate systems for large plots in the forest. We present a method that can be used for the absolute mapping of point features under a canopy that is efficient for large forest plots. In this method, an undistorted network of control points is established in the forest using photogrammetric observations of treetops. These points are used for the positioning of other points, using redundant observations of interpoint distances and azimuths and a least squares adjustment. The method provides decimetre-level accuracy and only one person is required to conduct the work. An estimate of the positioning accuracy of each point is readily available in the field. We present the method, a simulation study that explores the potential of the method and results from an experiment in a mixed boreal stand in southern Finland.

Reconstructing three-dimensional structural changes in the forest over time is possible using archived aerial photographs and photogrammetric techniques, which have recently been introduced to a larger audience with the advent of digital photogrammetry. This paper explores the feasibility of constructing an accurate time-series of archived aerial photographs spanning 42 years using different types of geometric data and estimation methods for image orientation. A recent airborne laser scanning (lidar) data set was combined with the image block and assessed for geometric match. The results suggest that it is possible to establish the multitemporal geometry of an image block to an accuracy that is better than 0.5 m in 3D and constant over time. Even geodetic ground control points can be omitted from the estimation if the most recent images have accurate direct sensor orientation, which is becoming a standard technique in aerial photography. This greatly reduces the costs and facilitates the work. An accurate multitemporal image block combined with recent lidar scanning for the estimation of topography allows accurate monitoring and retrospective analysis of forest vegetation and management operations.

Abstract: Imaging geometry, the structure of the forest, and certain tree properties can cause inaccuracy in image measurements of the crown dimensions of individual trees. Measurement error of the crown [...]

High resolution thermal infrared (TIR) imaging is opening up new vistas in biosphere-atmosphere heat exchange studies. The rapidly developing unmanned aerial systems (UAS) and specially designed TIR cameras offer opportunities for TIR survey with increasingly high resolution, reduced noise, prolonged flight times and better gimbals. A state-of-the-art science platform is assembled using a Matrice 210 V2 drone equipped with a Zenmuse XT2 thermal camera and deployed over a pristine boreal peatland with the aim to test its performance in a heterogeneous ecosystem with short vegetation. The study utilizes the capability of the UAS platform to hover for prolonged times (about 20 min) whilst recording high-frequency (1-30 Hz) TIR videos. A methodology to derive thermal signatures of near-ground coherent turbulent structures impinging on the land surface, surface temperature spectra and heat fluxes from the retrieved videos is developed. The size, residence time and movement of the coherent structures are computed from the surface temperature maps, and their dependency on atmospheric conditions is examined. A ground-based eddy-covariance system and a collocated meteorological setup are used for reference. [ABSTRACT FROM AUTHOR]

The information content of remotely sensed data depends primarily on the spatial and spectral properties of the imaging device. This paper focuses on the classification performance of the different spectral features (hyper- and multispectral measurements) with respect to three tree species. The Support Vector Machine was chosen as the classification algorithm for these features. A simulated optical radiation model was constructed to evaluate the identification performance of the given multispectral system for the tree species, and the effects of spectral-band selection and data preprocessing were studied in this setting. Simulations were based on the reflectance measurements of the pine (Pinus sylvestris L.), spruce [Picea abies (L.) H. Karst.], and birch trees (Betula pubescens Ehrh. and Betula pendula Roth). Leica ADS80 airborne sensor with four spectral bands (channels) was used as a fixed multispectral sensor system that leads to response values for the at-sensor radiance signal. Results suggest that this four-band system has inadequate classification performance for the three tree species. The simulations demonstrate on average a 5-15 percentage points improvement in classification performance when the Leica system is combined with one additional spectral band. It is also demonstrated for the Leica data that feature mapping through a Mahalanobis kernel leads to a 5-10 percentage points improvement in classification performance when compared with other kernels. [ABSTRACT FROM AUTHOR]