Search

Reports on a study comparing attitudes of Russian and Estonian students at Estonia's Tartu University. The study documented the students expectations of future success and stability for upcoming stages of their life. Correlates these attitudes with the personal and demographic information provided by the students. (MJP)

Abstract Background Nitrilases attract increasing attention due to their utility in the mild hydrolysis of nitriles. According to activity and gene screening, filamentous fungi are a rich source of nitrilases distinct in evolution from their widely examined bacterial counterparts. However, fungal nitrilases have been less explored than the bacterial ones. Nitrilases are typically heterogeneous in their quaternary structures, forming short spirals and extended filaments, these features making their structural studies difficult. Results A nitrilase gene was amplified by PCR from the cDNA library of Aspergillus niger K10. The PCR product was ligated into expression vectors pET-30(+) and pRSET B to construct plasmids pOK101 and pOK102, respectively. The recombinant nitrilase (Nit-ANigRec) expressed in Escherichia coli BL21-Gold(DE3)(pOK101/pTf16) was purified with an about 2-fold increase in specific activity and 35% yield. The apparent subunit size was 42.7 kDa, which is approx. 4 kDa higher than that of the enzyme isolated from the native organism (Nit-ANigWT), indicating post-translational cleavage in the enzyme's native environment. Mass spectrometry analysis showed that a C-terminal peptide (Val327 - Asn356) was present in Nit-ANigRec but missing in Nit-ANigWT and Asp298-Val313 peptide was shortened to Asp298-Arg310 in Nit-ANigWT. The latter enzyme was thus truncated by 46 amino acids. Enzymes Nit-ANigRec and Nit-ANigWT differed in substrate specificity, acid/amide ratio, reaction optima and stability. Refolded recombinant enzyme stored for one month at 4°C was fractionated by gel filtration, and fractions were examined by electron microscopy. The late fractions were further analyzed by analytical centrifugation and dynamic light scattering, and shown to consist of a rather homogeneous protein species composed of 12-16 subunits. This hypothesis was consistent with electron microscopy and our modelling of the multimeric nitrilase, which supports an arrangement of dimers into helical segments as a plausible structural solution. Conclusions The nitrilase from Aspergillus niger K10 is highly homologous (≥86%) with proteins deduced from gene sequencing in Aspergillus and Penicillium genera. As the first of these proteins, it was shown to exhibit nitrilase activity towards organic nitriles. The comparison of the Nit-ANigRec and Nit-ANigWT suggested that the catalytic properties of nitrilases may be changed due to missing posttranslational cleavage of the former enzyme. Nit-ANigRec exhibits a lower tendency to form filaments and, moreover, the sample homogeneity can be further improved by in vitro protein refolding. The homogeneous protein species consisting of short spirals is expected to be more suitable for structural studies.

The synthesis of nitriles is of utmost importance for preparative organic chemistry. The classical routes are often associated with disadvantages such as toxicity of the reagents and drastic conditions. The uses of enzymes like aldoxime dehydratases (Oxds) and hydroxynitrile lyases constitute attractive benign alternatives. In this review, we summarize the recent trends regarding Oxds. Thousands of oxd genes were sequenced but less than thirty Oxds were investigated on protein level. We give an overview of these Oxds, their sequence analysis, conditions required for their overexpression, and their purification and assays. We then focus on the use of Oxds especially in multistep reactions combining the chemical or chemoenzymatic synthesis of aldoximes from different starting materials with the enzymatic dehydration of aldoximes to nitriles, possibly followed by the hydration of nitriles to amides. Progress in Oxd immobilization is also highlighted. Based on data published mainly in the last 5 years, we evaluate the industrial prospects of these enzyme processes in comparison with some other innovations in nitrile synthesis. KEY POINTS: • Aldoxime dehydratases (Oxds) are promising for cyanide-free routes to nitriles • A comprehensive overview of wet-lab explored Oxds is provided • Recent trends include combining Oxds with other enzymes or chemical catalysts., Competing Interests: Declarations Competing interests The authors declare no competing interests., (© 2024. The Author(s).)

Nitriles have a wide range of uses as building blocks, solvents, and alternative fuels, but also as intermediates and components of flavors and fragrances. The enzymatic synthesis of nitriles by aldoxime dehydratase (Oxd) is an emerging process with significant advantages over conventional approaches. Here we focus on the immobilization of His-tagged Oxds on metal affinity resins, an approach that has not been used previously for these enzymes. The potential of the immobilized Oxd was demonstrated for the synthesis of phenylacetonitrile (PAN) and E-cinnamonitrile, compounds applicable in the fragrance industry. A comparison of Talon and Ni-NTA resins showed that Ni-NTA with its higher binding capacity was more suitable for the immobilization of Oxd. Immobilized Oxds were prepared from purified enzymes (OxdFv from Fusarium vanettenii and OxdBr1 from Bradyrhizobium sp.) or the corresponding cell-free extracts. The immobilization of cell-free extracts reduced time and cost of the catalyst production. The immobilized OxdBr1 was superior in terms of recyclability (22 cycles) in the synthesis of PAN from 15 mM E/Z-phenylacetaldoxime at pH 7.0 and 30 °C (100% conversion, 61% isolated yield after product purification). The volumetric and catalyst productivity was 10.5 g/L/h and 48.3 g/g of immobilized protein, respectively., Competing Interests: Declaration of Competing Interest Coauthor Dr. Margit Winkler is Associate Editor of Journal of Biotechnology., (Copyright © 2024 Elsevier B.V. All rights reserved.)

The aim the study. Analyze errors in planning orthopedic treatment using dental implants using the example of clinical cases., Materials and Methods: Two patients are presented who applied for a consultation at the orthopedic and surgical department of the Federal State Budgetary Institution National Medical Research Center Central Research Institute of Chronic and Peripheral Surgery of the Russian Ministry of Health regarding a fracture of a previously installed orthopedic structure on an implant. For diagnostic purposes, computed tomography was performed to determine the condition of the implants and teeth of the upper and lower jaws., Results: The patients were found to have: a fracture of an implant 4.0*10 with a single orthopedic structure in the area of tooth 4.6 (the patient did not undergo restoration of the missing tooth 4.7 in the presence of an antagonist), a fracture of small diameter implants (3.5*9) in the area of 3.6, 3.7, prosthetic combined orthopedic crowns., Conclusions: During surgical and orthopedic treatment of patients, it is necessary to strictly follow the instructions developed by the manufacturer of dental implants and the STaR recommendations.

Background: Restoring the integrity of the dentition with orthopedic structures should be carried out strictly according to indications, taking into account the condition of the supporting teeth and/or teeth limiting the defect., Objective: To conduct a retrospective analysis of the results of orthopedic treatment of patients with shortened dentition according to clinical and radiological methods., Materials and Methods: The material for the study was data from cone beam computed tomography (CBCT) of 126 patients with shortened dentition (most patients with the absence of a second molar, as well as the absence of the first and second molars), who sought a consultation about missing teeth in the orthopedic and surgical department of the Federal State Budgetary Institution National Medical Research Center TsNIISiCHLKh Ministry of Health of Russia., Results: At the stages of treatment for patients in the study group, insufficient attention is paid to the restoration of terminal defects of the dentition in the upper and lower jaws, especially the restoration of second molars. This may be due to improper planning of dental treatment and insufficient motivation of the patient to carry out comprehensive dental rehabilitation. According to CT studies, the number of complications of orthopedic treatment in the area of supporting teeth and/or teeth limiting the included defect or terminal defect of the dentition in the masticatory region increases depending on the period of use of the orthopedic structure., Conclusions: The use of cantilever structures leads to functional overload of the supporting teeth. Neglecting the restoration of a full dentition and prosthetics of end defects of the dentition leads to dentoalveolar advancement of antagonists of missing teeth and the appearance of complications such as functional overload of supporting teeth and resorption of alveolar bone.

Flavonoids and their glycosides are abundant in many plant-based foods. The (de)glycosylation of flavonoids by retaining glycoside hydrolases has recently attracted much interest in basic and applied research, including the possibility of altering the glycosylation pattern of flavonoids. Research in this area is driven by significant differences in physicochemical, organoleptic, and bioactive properties between flavonoid aglycones and their glycosylated counterparts. While many flavonoid glycosides are present in nature at low levels, some occur in substantial quantities, making them readily available low-cost glycosyl donors for transglycosylations. Retaining glycosidases can be used to synthesize natural and novel glycosides, which serve as standards for bioactivity experiments and analyses, using flavonoid glycosides as glycosyl donors. Engineered glycosidases also prove valuable for the synthesis of flavonoid glycosides using chemically synthesized activated glycosyl donors. This review outlines the bioactivities of flavonoids and their glycosides and highlights the applications of retaining glycosidases in the context of flavonoid glycosides, acting as substrates, products, or glycosyl donors in deglycosylation or transglycosylation reactions.

Implementing vaccines against severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) is a major asset in slowing down the coronavirus disease 2019 (COVID-19) pandemic. For mRNA vaccines, the main severe adverse events reported in pharmacovigilance systems and post-authorization studies were anaphylaxis and myocarditis. Pancreatitis after Pfizer/BioNTech COVID-19 vaccination has been reported only in 10 patients.We report a 31-year-old female with a history of borderline personality disorder, intravenous drug abuse, allergic asthma, eating disorder, psoriatic arthritis treated with tofacitinib, neurogenic bladder disturbance, cholecystectomy, recurrent thoracic herpes zoster, vaginal candida infections and urinary tract infections, who developed pancreatitis associated with thrombotic microangiopathy and hemolytic-uremic syndrome 10 days after the second vaccination, whereas the first has been well tolerated. She was treated by plasma exchange, and eventually by transgastric drainage with implantation of a plastic stent to remove fluid abdominal retentions. She was discharged after 19 days. Since then her condition has improved continuously. Computed tomography after 12 months did not reveal retentions anymore.As other causes of pancreatitis have been excluded, this case of acute pancreatitis, microangiopathic hemolytic anemia and thrombocytopenia, temporally associated with the Pfizer-BioNTech COVID-19 vaccine, suggests a causal link., (© 2023. The Author(s), under exclusive licence to Springer-Verlag GmbH Austria, part of Springer Nature.)

β- N -Acetylhexosaminidase from Talaromyces flavus ( Tf Hex; EC 3.2.1.52) is an exo -glycosidase with dual activity for cleaving N -acetylglucosamine (GlcNAc) and N -acetylgalactosamine (GalNAc) units from carbohydrates. By targeting a mutation hotspot of the active site residue Glu332, we prepared a library of ten mutant variants with their substrate specificity significantly shifted towards GlcNAcase activity. Suitable mutations were identified by in silico methods. We optimized a microtiter plate screening method in the yeast Pichia pastoris expression system, which is required for the correct folding of tetrameric fungal β- N -acetylhexosaminidases. While the wild-type Tf Hex is promiscuous with its GalNAcase/GlcNAcase activity ratio of 1.2, the best single mutant variant Glu332His featured an 8-fold increase in selectivity toward GlcNAc compared with the wild-type. Several prepared variants, in particular Glu332Thr Tf Hex, had significantly stronger transglycosylation capabilities than the wild-type, affording longer chitooligomers - they behaved like transglycosidases. This study demonstrates the potential of mutagenesis to alter the substrate specificity of glycosidases.

The glycosidases within GH5-23 cleave the glycosidic bond of β-glucosylated or rutinosylated flavonoids. Moreover, by virtue of their transglycosylation activity, glycoconjugates with glucosyl and rutinosyl moieties are accessible. Here we report the biochemical characterization and biotechnological assessment of two heterologously expressed members of GH5-23-McGlc from Mucor circinelloides and PcGlc from Penicillium chrysogenum. Both enzymes exhibited the highest hydrolytic activities with quercetin-3-β-O-glucopyranoside, whereas lower specificity constants were determined with the rutinosides narcissin, rutin and hesperidin. High stabilities against thermal, ethanol and dimethyl sulfoxide-induced inactivation, a very limited secondary hydrolysis of the formed transglycosylation products, and no detectable product inhibition were additional features appropriate for biotechnological applications. The enzymes were compared in their efficiencies to hydrolyze rutin and to synthesize 2-phenylethyl rutinoside under homogeneous and heterogeneous reaction conditions using high rutin concentrations of 100 and 300 mM. Highest transglycosylation efficiencies were achieved with fully dissolved rutin in reaction mixtures containing 25% dimethyl sulfoxide. Molecular docking and multiple sequence alignments suggest that the hydrophobic environment of aromatic residues within the + 1 subsite of GH5-23 glycosidases is very important for the binding of flavonoid glucosides and rutinosides., (© 2021. The Author(s).)

Rutinosidases (α-l-rhamnopyranosyl-(1-6)-β-d-glucopyranosidases, EC 3.2.1.168, CAZy GH5) are diglycosidases that cleave the glycosidic bond between the disaccharide rutinose and the respective aglycone. Similar to many retaining glycosidases, rutinosidases can also transfer the rutinosyl moiety onto acceptors with a free -OH group (so-called transglycosylation). The recombinant rutinosidase from Aspergillus niger ( An Rut) is selectively produced in Pichia pastoris. It can catalyze transglycosylation reactions as an unpurified preparation directly from cultivation. This enzyme exhibits catalytic activity towards two substrates; in addition to rutinosidase activity, it also exhibits β-d-glucopyranosidase activity. As a result, new compounds are formed by β-glucosylation or rutinosylation of acceptors such as alcohols or strong inorganic nucleophiles (NaN 3 ). Transglycosylation products with aliphatic aglycones are resistant towards cleavage by rutinosidase, therefore, their side hydrolysis does not occur, allowing higher transglycosylation yields. Fourteen compounds were synthesized by glucosylation or rutinosylation of selected acceptors. The products were isolated and structurally characterized. Interactions between the transglycosylation products and the recombinant An Rut were analyzed by molecular modeling. We revealed the role of a substrate tunnel in the structure of An Rut, which explained the unusual catalytic properties of this glycosidase and its specific transglycosylation potential. An Rut is attractive for biosynthetic applications, especially for the use of inexpensive substrates (rutin and isoquercitrin).

Rutinosidases (α-l-rhamnosyl-β-d-glucosidases) catalyze the cleavage of the glycosidic bond between the aglycone and the disaccharide rutinose (α-l-rhamnopyranosyl-(1→6)-β-d-glucopyranose) of specific flavonoid glycosides such as rutin (quercetin 3-O-rutinoside). Microbial rutinosidases are part of the rutin catabolic pathway, enabling the microorganism to utilize rutin and related plant phenolic glycosides. Here, we report the first three-dimensional structure of a rutinosidase determined at 1.27-Å resolution. The rutinosidase from Aspergillus niger K2 (AnRut), a member of glycoside hydrolase family GH-5, subfamily 23, was heterologously produced in Pichia pastoris. The X-ray structure of AnRut is represented by a distorted (β/α) 8 barrel fold with its closest structural homologue being an exo-β-(1,3)-glucanase from Candida albicans (CaExg). The catalytic site is located in a deep pocket with a striking structural similarity to CaExg. However, the entrance to the active site of AnRut has been found to be different from that of CaExg - a mostly unstructured section of ~ 40 residues present in CaExg is missing in AnRut, whereas an additional loop of 13 amino acids partially covers the active site of AnRut. NMR analysis of reaction products provided clear evidence for a retaining reaction mechanism of AnRut. Unexpectedly, quercetin 3-O-glucoside was found to be a better substrate than rutin, and thus, AnRut cannot be considered a typical diglycosidase. Mutational analysis of conserved active site residues in combination with in silico modeling allowed identification of essential interactions for enzyme activity and helped to reveal further details of substrate binding. The protein sequence of AnRut has been revised. DATABASES: The nucleotide sequence of the rutinosidase-encoding gene is available in the GenBank database under the accession number MN393234. Structural data are available in the PDB database under the accession number 6I1A. ENZYME: α-l-Rhamnosyl-β-d-glucosidase (EC 3.2.1.168)., (© 2020 Federation of European Biochemical Societies.)

AbstractDiglycosidases hydrolyze the heterosidic linkage of diglycoconjugates, releasing the disaccharide and the aglycone. Usually, these enzymes do not hydrolyze or present only low activities towards monoglycosylated compounds. The flavonoid degrading fungus Acremonium sp. DSM 24697 produced two diglycosidases, which were termed 6-O-α-rhamnosyl-β-glucosidase I and II (αRβG I and II) because of their function of releasing the disaccharide rutinose (6-O-α-L-rhamnosyl-β-D-glucose) from the diglycoconjugates hesperidin or rutin. In this work, the genome of Acremonium sp. DSM 24697 was sequenced and assembled with a size of ~ 27 Mb. The genes encoding αRβG I and II were expressed in Pichia pastoris KM71 and the protein products were purified with apparent molecular masses of 42 and 82 kDa, respectively. A phylogenetic analysis showed that αRβG I grouped in glycoside hydrolase family 5, subfamily 23 (GH5), together with other fungal diglycosidases whose substrate specificities had been reported to be different from αRβG I. On the other hand, αRβG II grouped in glycoside hydrolase family 3 (GH3) and thus is the first GH3 member that hydrolyzes the heterosidic linkage of rutinosylated compounds. The substrate scopes of the enzymes were different: αRβG I showed exclusive specificity toward 7-O-β-rutinosyl flavonoids, whereas αRβG II hydrolyzed both 7-O-β-rutinosyl- and 3-O-β-rutinosyl- flavonoids. None of the enzymes displayed activity toward 7-O-β-neohesperidosyl- flavonoids. The recombinant enzymes also exhibited transglycosylation activities, transferring rutinose from hesperidin or rutin onto various alcoholic acceptors. The different substrate scopes of αRβG I and II may be part of an optimized strategy of the original microorganism to utilize different carbon sources.

Quercetin is a flavonoid largely employed as a phytochemical remedy and a food or dietary supplement. We present here a novel biocatalytic methodology for the preparation of quercetin from plant-derived rutin, with both substrate and product being in mostly an undissolved state during biotransformation. This "solid-state" enzymatic conversion uses a crude enzyme preparation of recombinant rutinosidase from Aspergillus niger yielding quercetin, which precipitates from virtually insoluble rutin. The process is easily scalable and exhibits an extremely high space-time yield. The procedure has been shown to be robust and was successfully tested with rutin concentrations of up to 300 g/L (ca 0.5 M) at various scales. Using this procedure, pure quercetin is easily obtained by mere filtration of the reaction mixture, followed by washing and drying of the filter cake. Neither co-solvents nor toxic chemicals are used, thus the process can be considered environmentally friendly and the product of "bio-quality." Moreover, rare disaccharide rutinose is obtained from the filtrate at a preparatory scale as a valuable side product. These results demonstrate for the first time the efficiency of the "Solid-State-Catalysis" concept, which is applicable virtually for any biotransformation involving substrates and products of low water solubility.

β-N-Acetylhexosaminidases (EC 3.2.1.52) are typical of their dual activity encompassing both N-acetylglucosamine and N-acetylgalactosamine substrates. Here we present the isolation and characterization of a selective β-N-acetylhexosaminidase from the fungal strain of Aspergillus versicolor. The enzyme was recombinantly expressed in Pichia pastoris KM71H in a high yield and purified in a single step using anion-exchange chromatography. Homologous molecular modeling of this enzyme identified crucial differences in the enzyme active site that may be responsible for its high selectivity for N-acetylglucosamine substrates compared to fungal β-N-acetylhexosaminidases from other sources. The enzyme was used in a sequential reaction together with a mutant β-N-acetylhexosaminidase from Talaromyces flavus with an enhanced synthetic capability, affording a bioactive disaccharide bearing an azido functional group. The azido function enabled an elegant multivalent presentation of this disaccharide on an aromatic carrier. The resulting model glycoconjugate is applicable as a selective ligand of galectin-3 - a biomedically attractive human lectin. These results highlight the importance of a general availability of robust and well-defined carbohydrate-active enzymes with tailored catalytic properties for biotechnological and biomedical applications.

The structure of the carbohydrate moiety of a natural phenolic glycoside can have a significant effect on the molecular interactions and physicochemical and pharmacokinetic properties of the entire compound, which may include anti-inflammatory and anticancer activities. The enzyme 6-O-α-rhamnosyl-β-glucosidase (EC 3.2.1.168) has the capacity to transfer the rutinosyl moiety (6-O-α-l-rhamnopyranosyl-β-d-glucopyranose) from 7-O-rutinosylated flavonoids to hydroxylated organic compounds. This transglycosylation reaction was optimized using hydroquinone (HQ) and hesperidin as rutinose acceptor and donor, respectively. Since HQ undergoes oxidation in a neutral to alkaline aqueous environment, the transglycosylation process was carried out at pH values ≤6.0. The structure of 4-hydroxyphenyl-β-rutinoside was confirmed by NMR, that is, a single glycosylated product with a free hydroxyl group was formed. The highest yield of 4-hydroxyphenyl-β-rutinoside (38%, regarding hesperidin) was achieved in a 2-h process at pH 5.0 and 30 °C, with 36 mM OH-acceptor and 5% (v/v) cosolvent. Under the same conditions, the enzyme synthesized glycoconjugates of various phenolic compounds (phloroglucinol, resorcinol, pyrogallol, catechol), with yields between 12% and 28% and an apparent direct linear relationship between the yield and the pK a value of the aglycon. This work is a contribution to the development of convenient and sustainable processes for the glycosylation of small phenolic compounds., (© 2018 International Union of Biochemistry and Molecular Biology, Inc.)

α-L-Rhamnosidases cleave terminal nonreducing α-L-rhamnosyl residues from many natural rhamnoglycosides. This makes them catalysts of interest for various biotechnological applications. The X-ray structure of the GH78 family α-L-rhamnosidase from Aspergillus terreus has been determined at 1.38 Å resolution using the sulfur single-wavelength anomalous dispersion phasing method. The protein was isolated from its natural source in the native glycosylated form, and the active site contained a glucose molecule, probably from the growth medium. In addition to its catalytic domain, the α-L-rhamnosidase from A. terreus contains four accessory domains of unknown function. The structural data suggest that two of these accessory domains, E and F, might play a role in stabilizing the aglycon portion of the bound substrate.

Almost 100 genes within the genus Bradyrhizobium are known to potentially encode aldoxime dehydratases (Oxds), but none of the corresponding proteins have been characterized yet. Aldoximes are natural substances involved in plant defense and auxin synthesis, and Oxds are components of enzymatic cascades enabling bacteria to transform, utilize and detoxify them. The aim of this work was to characterize a representative of the highly conserved Oxds in Bradyrhizobium spp. which include both plant symbionts and members of the soil communities. The selected oxd gene from Bradyrhizobium sp. LTSPM299 was expressed in Escherichia coli, and the corresponding gene product (OxdBr1; GenBank: WP_044589203) was obtained as an N-His 6 -tagged protein (monomer, 40.7 kDa) with 30-47% identity to Oxds characterized previously. OxdBr1 was most stable at pH ca. 7.0-8.0 and at up to 30 °C. As substrates, the enzyme acted on (aryl)aliphatic aldoximes such as E/Z-phenylacetaldoxime, E/Z-2-phenylpropionaldoxime, E/Z-3-phenylpropionaldoxime, E/Z-indole-3-acetaldoxime, E/Z-propionaldoxime, E/Z-butyraldoxime, E/Z-valeraldoxime and E/Z-isovaleraldoxime. Some of the reaction products of OxdBr1 are substrates of nitrilases occurring in the same genus. Regions upstream of the oxd gene contained genes encoding a putative aliphatic nitrilase and its transcriptional activator, indicating the participation of OxdBr1 in the metabolic route from aldoximes to carboxylic acids., (Copyright © 2018 Elsevier B.V. All rights reserved.)

Haloalkane dehalogenases (HLDs) are environmentally relevant enzymes cleaving a carbon-halogen bond in a wide range of halogenated pollutants. PCR with degenerate primers and genome-walking was used for the retrieval of four HLD-encoding genes from groundwater-derived environmental DNA. Using specific primers and the environmental DNA as a template, we succeeded in generating additional amplicons, resulting altogether in three clusters of sequences with each cluster comprising 8-13 closely related putative HLD-encoding genes. A phylogenetic analysis of the translated genes revealed that three HLDs are members of the HLD-I subfamily, whereas one gene encodes an enzyme from the subfamily HLD-II. Two metagenome-derived HLDs, eHLD-B and eHLD-C, each from a different subfamily, were heterologously produced in active form, purified and characterized in terms of their thermostability, pH and temperature optimum, quaternary structure, substrate specificity towards 30 halogenated compounds, and enantioselectivity. eHLD-B and eHLD-C showed striking differences in their activities, substrate preferences, and tolerance to temperature. Profound differences were also determined in the enantiopreference and enantioselectivity of these enzymes towards selected substrates. Comparing our data with those of known HLDs revealed that eHLD-C exhibits a unique combination of high thermostability, high activity, and an unusually broad pH optimum, which covers the entire range of pH 5.5-8.9. Moreover, a so far unreported high thermostability for HLDs was determined for this enzyme at pH values lower than 6.0. Thus, eHLD-C represents an attractive and novel biocatalyst for biotechnological applications.

Tyrosinases act in the development of organoleptic properties of tea, raisins, etc., but also cause unwanted browning of fruits, vegetables, and mushrooms. The tyrosinase from Agaricus bisporus has been used as a model to study tyrosinase inhibitors, which are also indispensable in the treatment of skin pigmentation disorders. However, this model has disadvantages such as side enzyme activities and the presence of multiple isoenzymes. Therefore, we aimed to introduce a new tyrosinase model. The pro-tyrosinase from Polyporus arcularius was overproduced in Escherichia coli. Trypsin digestion led to a cleavage after R388 and hence enzyme activation. The tyrosinase was a homodimer and transformed L-DOPA and tert-butylcatechol preferentially. Various aurons were examined as effectors of this enzyme. 2'- and 3'-hydroxyaurones acted as its activators and 2',4'-dihydroxyaurone as an inhibitor, whereas 4'-hydroxyaurones were its substrates. The enzyme is a promising model for tyrosinase effector studies, being a single isoenzyme and void of side enzyme activities.

Bacteria represent an underexplored source of diglycosidases. Twenty-five bacterial strains from the genera Actinoplanes, Bacillus, Corynebacterium, Microbacterium, and Streptomyces were selected for their ability to grow in diglycosylated flavonoids-based media. The strains Actinoplanes missouriensis and Actinoplanes liguriae exhibited hesperidin deglycosylation activity (6-O-α-L-rhamnosyl-β-D-glucosidase activity, EC 3.2.1.168), which was 3 to 4 orders of magnitude higher than the corresponding monoglycosidase activities. The diglycosidase production was confirmed in A. missouriensis by zymographic assays and NMR analysis of the released disaccharide, rutinose. The gene encoding the 6-O-α-L-rhamnosyl-β-D-glucosidase was identified in the genome sequence of A. missouriensis 431(T) (GenBank accession number BAL86042.1) and functionally expressed in Escherichia coli. The recombinant protein hydrolyzed hesperidin and hesperidin methylchalcone, but not rutin, which indicates its specificity for 7-O-rutinosylated flavonoids. The protein was classified into the glycoside hydrolase family 55 (GH55) in contrast to the known eukaryotic diglycosidases, which belong to GH1 and GH5. These findings demonstrate that organisms other than plants and filamentous fungi can contribute to an expansion of the diglycosidase toolbox.

A detailed kinetic study based on steady-state and pre-steady-state measurements is described for the highly enantioselective epoxide hydrolase Kau2. The enzyme, which is a member of the α/β-hydrolase fold family, preferentially reacts with the (S,S)-enantiomer of trans-stilbene oxide (TSO) with an E value of ∼200. The enzyme follows a classical two-step catalytic mechanism with formation of an alkyl-enzyme intermediate in the first step and hydrolysis of this intermediate in a rate-limiting second step. Tryptophan fluorescence quenching during TSO conversion appears to correlate with alkylation of the enzyme. The steady-state data are consistent with (S,S) and (R,R)-TSO being two competing substrates with marked differences in k(cat) and K(M) values. The high enantiopreference of the epoxide hydrolase is best explained by pronounced differences in the second-order alkylation rate constant (k2/K(S)) and the alkyl-enzyme hydrolysis rate k3 between the (S,S) and (R,R)-enantiomers of TSO. Our data suggest that during conversion of (S,S)-TSO the two active site tyrosines, Tyr(157) and Tyr(259), serve mainly as electrophilic catalysts in the alkylation half-reaction, polarizing the oxirane oxygen of the bound epoxide through hydrogen bond formation, however, without fully donating their hydrogens to the forming alkyl-enzyme intermediate., (Copyright © 2015 Elsevier Inc. All rights reserved.)

The compositions of bacterial groundwater communities of three sites contaminated with chlorinated ethenes were analyzed by pyrosequencing their 16S rRNA genes. For each location, the entire and the active bacterial populations were characterized by independent molecular analysis of the community DNA and RNA. The sites were selected to cover a broad range of different environmental conditions and contamination levels, with tetrachloroethene (PCE) and trichloroethene (TCE) being the primary contaminants. Before sampling the biomass, a long-term monitoring of the polluted locations revealed high concentrations of cis-1,2-dichloroethene (cDCE) and vinyl chloride (VC), which are toxic by-products of the incomplete bacterial degradation of PCE and TCE. The applied pyrosequencing technique enabled known dechlorinators to be identified at a very low detection level (<0.25%) without compromising the detailed analysis of the entire bacterial community of these sites. The study revealed that only a few species dominated the bacterial communities, with Albidiferax ferrireducens being the only highly prominent member found at all three sites. Only a limited number of OTUs with abundances of up to 1% and high sequence identities to known dechlorinating microorganisms were retrieved from the RNA pools of the two highly contaminated sites. The dechlorinating consortium was likely to be comprised of cDCE-assimilating bacteria (Polaromonas spp.), anaerobic organohalide respirers (mainly Geobacter spp.), and Burkholderia spp. involved in cometabolic dechlorination processes, together with methylotrophs (Methylobacter spp.). The deep sequencing results suggest that the indigenous dechlorinating consortia present at the investigated sites can be used as a starting point for future bioremediation activities by stimulating their anaerobic and aerobic chloroethene degradation capacities (i.e. reductive dechlorination, and metabolic and cometabolic oxidation)., (Copyright © 2013 Elsevier B.V. All rights reserved.)

Haloalkane dehalogenases (HLDs) are hydrolytic enzymes that cleave carbon-halogen bonds in various halogenated compounds. Interest initially grew in HLDs as biocatalysts for bioremediation and later for biotransformation applications; each specific HLD within the HLD family has its own substrate specificity, enantioselectivity and product inhibition characteristics. We developed degenerate oligonucleotide primers for HLD-encoding genes and used these to PCR-amplify large hld gene fragments using genomic DNA from the microbial community of a chlorinated-solvent-contaminated aquifer as a template. An analysis of small subunit ribosomal RNA genes revealed a high complexity in the eubacterial population, dominated by α-, β- and γ-Proteobacteria, and Acidobacteria. Using HLD-family-specific primers, we also retrieved transcribed hld homologues from the microbial consortium of this contaminated site. The DNA-derived hld sequences were phylogenetically broadly distributed over both HLD subclasses I and II. Most hld sequences of the environmental RNA data set clustered in three groups within both HLD subclasses, indicating that a considerable proportion of the microbial consortium carrying hld genes was actively involved in haloalkane dehalogenation. The small sequence variation in hld genes and transcripts within each HLD cluster inferred the presence of a substantial pool of highly related HLD genes. The sequence variability appeared to be unevenly distributed over the HLD genes, however, with no apparent preference for a particular protein segment or domain., (Copyright © 2011 Elsevier B.V. All rights reserved.)

We performed a laboratory evolution study with the epoxide hydrolase from Aspergillus niger M200. This enzyme exhibits no enantioconvergence with the substrates styrene oxide or para-chlorostyrene oxide, i.e. racemic vicinal diols are produced from the racemic substrates. After saturation mutagenesis, screening by chiral gas chromatography revealed enzyme variants with improved enantioconvergence as manifested by an increased enantiomeric excess of the diol product. Nine amino acid exchanges accumulated in the active site and the substrate access tunnel over the course of 5 productive rounds of iterative saturation mutagenesis, resulting in an enantioconvergent epoxide hydrolase variant. The final mutant enzyme transformed racemic styrene oxide and para-chlorostyrene oxide to (R)-diol enantiomers with enantiomeric excesses of 70%. Sequential bi-enzymatic reactions using the wild-type EH and/or its evolved variants enabled preparation of the chiral building blocks (R)-phenyl-1,2-ethanediol and (R)-para-chlorophenyl-1,2-ethanediol from inexpensive racemic epoxides with enantiomeric excesses of 91% and 88%, respectively., (Copyright © 2011 Elsevier B.V. All rights reserved.)

Background: Nitrilases attract increasing attention due to their utility in the mild hydrolysis of nitriles. According to activity and gene screening, filamentous fungi are a rich source of nitrilases distinct in evolution from their widely examined bacterial counterparts. However, fungal nitrilases have been less explored than the bacterial ones. Nitrilases are typically heterogeneous in their quaternary structures, forming short spirals and extended filaments, these features making their structural studies difficult., Results: A nitrilase gene was amplified by PCR from the cDNA library of Aspergillus niger K10. The PCR product was ligated into expression vectors pET-30(+) and pRSET B to construct plasmids pOK101 and pOK102, respectively. The recombinant nitrilase (Nit-ANigRec) expressed in Escherichia coli BL21-Gold(DE3)(pOK101/pTf16) was purified with an about 2-fold increase in specific activity and 35% yield. The apparent subunit size was 42.7 kDa, which is approx. 4 kDa higher than that of the enzyme isolated from the native organism (Nit-ANigWT), indicating post-translational cleavage in the enzyme's native environment. Mass spectrometry analysis showed that a C-terminal peptide (Val327 - Asn₃₅₆) was present in Nit-ANigRec but missing in Nit-ANigWT and Asp₂₉₈-Val₃₁₃ peptide was shortened to Asp₂₉₈-Arg₃₁₀ in Nit-ANigWT. The latter enzyme was thus truncated by 46 amino acids. Enzymes Nit-ANigRec and Nit-ANigWT differed in substrate specificity, acid/amide ratio, reaction optima and stability. Refolded recombinant enzyme stored for one month at 4°C was fractionated by gel filtration, and fractions were examined by electron microscopy. The late fractions were further analyzed by analytical centrifugation and dynamic light scattering, and shown to consist of a rather homogeneous protein species composed of 12-16 subunits. This hypothesis was consistent with electron microscopy and our modelling of the multimeric nitrilase, which supports an arrangement of dimers into helical segments as a plausible structural solution., Conclusions: The nitrilase from Aspergillus niger K10 is highly homologous (≥86%) with proteins deduced from gene sequencing in Aspergillus and Penicillium genera. As the first of these proteins, it was shown to exhibit nitrilase activity towards organic nitriles. The comparison of the Nit-ANigRec and Nit-ANigWT suggested that the catalytic properties of nitrilases may be changed due to missing posttranslational cleavage of the former enzyme. Nit-ANigRec exhibits a lower tendency to form filaments and, moreover, the sample homogeneity can be further improved by in vitro protein refolding. The homogeneous protein species consisting of short spirals is expected to be more suitable for structural studies.

Environmental DNA is an extremely rich source of genes encoding enzymes with novel biocatalytic activities. To tap this source, function-based and sequence-based strategies have been established to isolate, clone, and express these novel metagenome-derived genes. Sequence-based strategies, which rely on PCR with consensus primers and genome walking, represent an efficient and inexpensive alternative to activity-based screening of recombinant strains harbouring fragments of environmental DNA. This review covers the diverse array of genome-walking techniques, which were originally developed for genomic DNA and currently are also used for PCR-based recovery of entire genes from the metagenome. These sequence-based gene mining methods appear to offer a powerful tool for retrieving from the metagenome novel genes encoding biocatalysts with potential applications in biotechnology.

The gene encoding an epoxide hydrolase from Aspergillus niger M200 has been cloned and its sequence determined. The gene is interrupted by seven introns, one exon being only nine nucleotides long. The non-coding 5'- and 3'-regions of the mRNA are composed of 47 and 76 nucleotides, respectively. Overexpression of the fungal epoxide hydrolase in E. coli TOP10 has led to a 15-fold increase in specific activity (compared to the wild-type strain). Saturation mutagenesis at codon 217 resulted in the discovery of nine enzyme variants showing in several cases profound differences in activity and enantioselectivity towards various epoxides when compared to the data of the wild-type enzyme. The site 217 is located at the entrance of the tunnel that provides the substrate with access to the active site. The exchange of Ala at this position for Cys has led to a doubled enantioselectivity (E-value of 5.0) towards benzyl glycidyl ether. The same substitution resulted in a threefold-enhanced activity of the enzyme towards allyl glycidyl ether and styrene oxide without affecting enantioselectivity. The variant A217L showed an enhanced enantioselectivity towards tert-butyl glycidyl ether reaching an E-value of 100 (from 60 for the wild-type enzyme). Replacement of A217 by Val has led to higher activity towards allyl glycidyl ether by a factor of six. The substitutions Ala-->Glu and Ala-->Gln increased the enantioselectivity towards allyl glycidyl ether and styrene oxide by over 50% to E-values of 10 and 16, respectively. The study underlines that single amino acid exchanges in the substrate tunnel region can lead to significant improvements in enantioselectivity and activity of the epoxide hydrolase from A. niger M200.

Purification of a novel enantioselective epoxide hydrolase from Aspergillus niger M200 has been achieved using ammonium sulphate precipitation, ionic exchange, hydrophobic interaction, and size-exclusion chromatography, in conjunction with two additional chromatographic steps employing hydroxylapatite, and Mimetic Green. The enzyme was purified 186-fold with a yield of 15%. The apparent molecular mass of the enzyme was determined to be 77 kDa under native conditions and 40 kDa under denaturing conditions, implying a dimeric structure of the native enzyme. The isoelectric point of the enzyme was estimated to be 4.0 by isoelectric focusing electrophoresis. The enzyme has a broad substrate specificity with highest specificities towards tert-butyl glycidyl ether, para-nitrostyrene oxide, benzyl glycidyl ether, and styrene oxide. Enantiomeric ratios of 30 to more than 100 were determined for the hydrolysis reactions of 4 epoxidic substrates using the purified enzyme at a reaction temperature of 10 degrees C. Product inhibition studies suggest that the enzyme is able to differentiate to a high degree between the (R)-diol and (S)-diol product of the hydrolysis reaction with tert-butyl glycidyl ether as the substrate. The highest activity of the enzyme was at 42 degrees C and a pH of 6.8. Six peptide sequences, which were obtained by cleavage of the purified enzyme with trypsin and mass spectrometry analysis of the tryptic peptides, show high similarity with corresponding sequences originated from the epoxide hydrolase from Aspergillus niger LCP 521.

Microbial isolates from biofilters and petroleum-polluted bioremediation sites were screened for the presence of enantioselective epoxide hydrolases active towards tert-butyl glycidyl ether, benzyl glycidyl ether, and allyl glycidyl ether. Out of 270 isolated strains, which comprised bacteria, yeasts, and filamentous fungi, four were selected based on the enantioselectivities of their epoxide hydrolases determined in biotransformation reactions. The enzyme of Aspergillus niger M200 preferentially hydrolyses (S)-tert-butyl glycidyl ether to (S)-3-tert-butoxy-1,2-propanediol with a relatively high enantioselectivity (the enantiomeric ratio E is about 30 at a reaction temperature of 28 degrees C). Epoxide hydrolases of Rhodotorula mucilaginosa M002 and Rhodococcus fascians M022 hydrolyse benzyl glycidyl ether with relatively low enantioselectivities, the former reacting predominantly with the (S)-enantiomer, the latter preferring the (R)-enantiomer. Enzymatic hydrolysis of allyl glycidyl ether by Cryptococcus laurentii M001 proceeds with low enantioselectivity (E=3). (R)-tert-Butyl glycidyl ether with an enantiomeric excess (ee) of over 99%, and (S)-3-tert-butoxy-1,2-propanediol with an ee-value of 86% have been prepared on a gram-scale using whole cells of A. niger M200. An enantiomeric ratio of approximately 100 has been determined under optimised biotransformation conditions with the partially purified epoxide hydrolase from A. niger M200. The regioselectivity of this enzyme was determined to be total for both (S)-tert-butyl glycidyl ether and (R)-tert-butyl glycidyl ether.

Expression of a recombinant pyranose oxidase (P2O) from the basidiomycete Trametes ochracea has been increased 10-fold in shaking flask cultures of Escherichia coli BL21(DE3) harboring plasmid pSE33 by optimizing the composition of the culture medium using an experimental design approach. Inexpensive lactose was used as a medium component and inducer of expression of the P2O gene, which is under the control of a trc promoter. The expression system was studied in detail in batch and fed-batch cultivations with the aim to improve the expression level of active recombinant protein and to minimize the formation of inclusion bodies. In batch cultivations, the highest specific P2O activity of 0.9 U (mg of soluble protein)(-1) was measured in oxygen-limited cultures grown at 25 degrees C. The highest overall volumetric productivity of 33 mg of active P2O per liter and hour (corresponding to 345U (L h)(-1)) has been determined in a high-density fed-batch process with a feed-forward exponential feeding strategy. During the fed-batch process, lactose was added intermittently to the culture. A final biomass concentration of 33 g L(-1) (based on cell dry weight) was obtained. Compared to shaking flask cultures in not optimized culture media, the overall volumetric P2O productivity has been improved by a factor of 110 using the fed-batch strategy and the optimized culture medium. Recombinant P2O was expressed in the cytoplasm with 9% of the total soluble protein being active P2O. In terms of physical and enzyme kinetic properties, the purified recombinant P2O was found to be similar to the previously published data of P2O isolated from its original host.

Molecular characterisation of a lytic thermoactive beta-1,3-glucanase from Oerskovia xanthineolytica LL-G109 has been performed. A molecular mass of 27 195.6 +/- 1.3 Da and an isoelectric point of 4.85 were determined by electrospray mass spectrometry and from its titration curve, respectively. Its thermoactivity profile shows it to be a heat-stable enzyme with a temperature optimum of 65 degrees C. The secondary structure content of the protein was estimated by circular dichroism to be approx. 25% alpha-helix, 7% random coil, and 68% beta-sheet and beta-turn structure. Nuclear magnetic resonance spectra confirm the high content of beta-structure. Furthermore, the presence of a compact hydrophobic core is indicated by the presence of slowly exchanging amide hydrogens and the enzyme's relatively high resistance to proteolysis. The N-terminal sequences of the intact protein and of a tryptic peptide each exhibit significant similarity to family 16 of glycosyl hydrolases whose overall fold is known to contain almost exclusively beta-sheets and surface loops. Moreover, the sequenced tryptic peptide appears to encompass residues of the Oerskovia xanthineolytica glucanase active site, since it contains a portion of the family 16 active-site motif E-[L/I/V]-D-[L/I/V]-E.

Four peptides encompassing the entire amino acid sequence of hen lysozyme were examined in aqueous solution and in 50% (v/v) 2,2,2-trifluoroethanol (TFE) by far-UV CD. Two peptides, 1-40 and 84-129, correspond to regions which are helical in the native protein, and together represent the alpha-domain. The beta-domain of the native enzyme was also synthesized as two peptides, one (41-60) containing the residues in the triple stranded antiparallel beta-sheet and the other (61-82) corresponding to a region lacking regular secondary structure. In water at pH 2.0 and 25 degrees C, the monomeric peptides 1-40, 41-60 and 61-82 appear to be predominantly unstructured. By contrast, the peptide 84-129 has considerable, presumably helical structure, corresponding to approximately 19%, or nine residues, on average, which can be unfolded by the addition of 8 M urea or 6 M guanidine hydrochloride. In 50% TFE the conformational properties of the four peptides are again distinct. Although little helical structure is induced in the peptides 41-60 and 61-82, and a native-like extent of helical structure is induced in the peptide 1-40, the peptide 84-29 converts almost entirely to helical structure in 50% TFE. The far-UV CD spectrum of a stoichiometric mixture of the four peptides in water resembles closely that of a denatured state of the intact protein formed by reductive methylation of its four disulphide bonds, but differs significantly from that of the native protein. The far-UV CD spectrum of the peptide mixture in TFE is indistinguishable from that of the intact protein in this solvent, both in the presence and in the absence of its four disulphide bonds. The conformational preferences of the peptides are not predicted using standard assessments of helical propensity or hydrophobicity, but correlate instead with the number of local contacts made in the native protein. On the basis of these results, we suggest that the region 84-129 could play an important role in determining the nature of the early folding events in the folding pathway of the intact polypeptide chain.

The folding of hen egg white lysozyme is complex, involving parallel pathways and distinct folding domains [Radford, S.E., Dobson, C.M., & Evans, P.A. (1992) Nature 358, 302-307]. In the present work the refolding of this protein from two denatured states that have different conformational properties, one generated by the presence of guanidinium chloride (GdmCl) and the other by dimethyl sulfoxide (DMSO), has been examined. Refolding was initiated by rapid dilution and followed by hydrogen-exchange pulse labeling, stopped-flow circular dichroism (CD) in the near-ultraviolet region, and stopped-flow fluorescence experiments. When the final refolding conditions were identical (545 mM GdmCl, 8% (v/v) DMSO, and 20 mM sodium acetate, pH 5.5, 20 degrees C), the folding behavior from the different denatured states monitored by near-UV CD and hydrogen-exchange pulse labeling was indistinguishable. These experiments indicate that the folding process of hen lysozyme is not significantly dependent on the nature of the two denatured states. The complexities in the pathway, therefore, appear to arise from properties of the collapsed state which is formed within the first few milliseconds of refolding. The kinetics of folding were found to be dependent on the concentration of DMSO in the final refolding buffer, although the fundamental properties of the pathway, including the existence of parallel events and distinct folding domains, are preserved under all the conditions studied. Inclusion of DMSO in the refolding buffer increases the rate of formation of native-like structure and of the native state itself. This could result from destablization of species formed early in folding, allowing them to rearrange more rapidly to permit productive folding to proceed. The results indicate that examination of a wide range of conditions will contribute substantially to a more complete understanding of protein folding pathways.

In order to investigate the physical basis of protein stability, two mutant L-lactate dehydrogenases (LDH) and the wild-type enzyme from Bacillus megaterium were analyzed for differences in quaternary structure, global protein conformation, thermal stability, stability against guanidine hydrochloride, and polypeptide chain flexibility. One mutant enzyme, ([T29A, S39A]LDH), differing at two positions in the alpha-B helix, exhibited a 20 degrees C increase in thermostability. Hydrogen/deuterium exchange revealed a rigid structure of this enzyme at room temperature. The substitutions Ala37 to Val and Met40 to Leu destabilize the protein. This is observable in a greater susceptibility to thermal denaturation and in an unusual monomer/dimer/tetramer equilibrium in the absence of fructose 1,6-bisphosphate Fru(1,6)P2. The stability, flexibility and protein-conformation measurements were all performed in the presence of 5 mM Fru(1,6)P2, i.e. under conditions where the three investigated LDH species are stable tetramers. Tryptophan fluorescence was used to monitor the unfolding in guanidine HCl of two local structures in or very close to the beta-sheets at the protein surface. The LDHs form folding intermediates in guanidine HCl that aggregate at elevated temperatures. Pronounced differences between the three investigated enzymes are found in their ability to aggregate. The exchange of Thr29 and Ser39 for Ala leads to significantly less aggregation in guanidine HCl than is observed for wild-type LDH. Using 8-anilinonaphthalene-1-sulfonic acid, the folding intermediates were shown to be in accordance with molten-globule-like structures. We have found, by means of molecular sieve chromatography, that the [T29A, S39A]LDH with its increased thermostability has lower susceptibility to disintegrate into monomers in guanidine HCl at 25 degrees C. Despite the differences in aggregation at low guanidine HCl concentrations and temperatures above 25 degrees C, the molten-globule-like structures of the three investigated LDH species are structurally similar, as shown by molecular-sieve chromatography. Although the thermostabilities of the three LDH species are so different in aqueous buffers, their stabilities in guanidine HCl at 20 degrees C are, surprisingly, almost identical. Some comments are made as to the origin of the observed difference between thermal and guanidine HCl stabilities of the LDH. Near-ultraviolet and far-ultraviolet circular dichroism measurements, as well as differences in the amount of activation by Fru(1,6)P2, point to small global structural rearrangements caused by the mutations. Conformational changes upon Fru(1,6)P2 binding or point mutations in the alpha-B helix show that the Fru(1,6)P2-binding site and the alpha-B helix are structurally linked together.(ABSTRACT TRUNCATED AT 400 WORDS)

L-Lactate dehydrogenase from Bacillus stearothermophilus (BSLDH) has been shown to change its conformation in a temperature-dependent manner in the temperature range between 25 and 70 degrees C. To provide a more detailed understanding of this reversible structural reorganization of the tetrameric form of BSLDH, we have determined in the presence of 5 mM fructose, 1,6-bisphosphate (FBP) the effect of temperature on far-UV and near-UV circular dichroism (CD), Nile red-binding to the enzyme surface, NADH binding, fluorescence polarization of fluorescamine-labeled protein, and hydrogen-deuterium exchange. In addition, we have analyzed the temperature dependence of the dimer-tetramer equilibrium of this protein by steady-state enzyme kinetics in the absence of FBP. The results obtained from these measurements at various temperatures can be summarized as follows. No changes in the secondary-structure distribution are detectable from far-UV CD measurements. On the other hand, near-UV CD data reveal that changes in the arrangements of aromatic side chains do occur. With increasing temperature, the asymmetry of the environment around aromatic residues decreases with a small change at 45 degrees C and a more pronounced change at 65 degrees C. Nile red-binding data suggest that the BSLDH surface hydrophobicity changes with temperature. It appears that decreasing the surface hydrophobicity may be a strategy to increase the protein stability of the active enzyme. We have noted significant alterations in the thermodynamic binding parameters of NADH above 45 degrees C, indicating a conformational change in the active site at 45 degrees C. The hydrodynamic volume of BSLDH is also temperature dependent.(ABSTRACT TRUNCATED AT 250 WORDS)