1,052 results on '"Kou, Hongchao"'
Search Results
2. Crystallographic orientation related dynamic recrystallization behavior and its impact on texture development of high-temperature α phase in TiAl alloy
3. Dependency of mechanical properties in Ti-7Mo-3Al-3Cr-3Nb alloy on the β phase stability: Regulating primary α phase
4. Microstructure evolution and deformation behavior of Ti-7Mo-3Al-3Cr-3Nb alloy with different β grain sizes during tensile deformation
5. Effect of stress-induced martensite volume fraction on deformation behavior and mechanical properties of Ti-7333 alloy
6. Texture evolution and anisotropy of TA18 titanium alloy strip under rolling and heat treatment conditions
7. Investigation of micro-mechanisms for facet formation during dwell fatigue in Ti6321 alloy with equiaxed microstructure
8. Origin of surface oxidation induced the nucleation and propagation of microcracks in TNM alloy
9. Bending properties and deformation micromechanisms of near-α titanium alloy sheets/foils considering initial texture characteristics and size effect
10. Deciphering the role of macrozones in the microstructure globularization and tensile fracture: Insights from a new developed marine engineering titanium alloy
11. Preferential fatigue cracking at basal twist grain boundary (BTGB) in bimodal Ti-5Al-4V alloy: Dislocation activities and crack initiation
12. Novel hierarchical α structure enhanced strength-ductility synergy in metastable β titanium alloy
13. Strengthening the {0001} basal texture of α phases for extruded TNM alloy by high magnetic field heat treatment at 1290 ℃
14. Twins and β0 precipitation effects on the lamellar degradation in TNM alloy during creep
15. Subsurface phase precipitation induced by oxidation of TNM alloy under high-temperature tensile
16. Cooling rate effects on microstructure and diffusion behaviour in Ti65 alloy: Insights from a modified diffusion model
17. Role of grain size in the evolution of stress-induced martensite and the tensile deformation behavior of Ti-7333 alloy
18. Quasi-in-situ investigation on complete lamellar fragmentation of β-solidified TiAl alloy during uniaxial isothermal compression
19. Micro-structural damage and mechanical response of TiAl alloy with lamellar microstructure during thermal shock progress
20. Characteristics of lamellar evolution and softening behavior of Powder-HIPed TNM alloy during hot compression
21. Tailoring texture in a near-α titanium alloy: Insights from strain paths and cooling rate influences
22. Orientation-dependent deformation behaviors of β single crystal micropillars in a metastable β titanium alloy
23. Hook's law scaled broken-bond model for surface energy: From metals to ceramics
24. Growth of α phase during lamellar decomposition of Ti‐48Al‐7Nb‐2.5V‐1Cr alloy
25. Phase separation in hexagonal α phase during lamellar formation of TiAl alloys and its effect on subsequent phase transformations
26. Tailoring lamellar orientation and tensile properties of TNM alloy via extrusion
27. New insights into the optimisation of the solution heat treatment process and properties of CMSX-4 superalloys
28. Experimental and numerical study of the flaring process for Zircaloy tube end
29. Mechanical behaviour and microstructural evolution of Ti–6Al–1Mo–1V–2Zr–2Cr–1Fe alloy subjected to hot compression deformation
30. Enhanced strength-ductility synergy of β-solidifying TiAl alloy with preferred lamellar orientation by texturing high-temperature α phase through hot extrusion
31. Formation of core-shell-like structure in β-solidified TiAl alloy and its effect on hot workability
32. Achieving excellent strength-ductility combination in an Inconel 625 superalloy via short-term stress-aging treatment
33. Crack initiation mechanism in a high-strength Ti-5Al-7.5V alloy subjected to high cycle fatigue loading
34. The microstructure evolution and phase transformation behavior of a β-solidifying γ-TiAl alloy during creep
35. Crack initiation mechanism of a silicide-containing high-strength Ti–5Al-7.5V alloy under low-cycle fatigue loading
36. Crystallographic analysis of slip system activation in bimodal Ti–6Al–3Nb–2Zr–1Mo alloy under various dwell-fatigue loadings
37. Controlling lamellar orientation of Ti-47.5Al-5Nb-2.5V-1Cr alloy by conventional casting
38. Creep anisotropy behavior, deformation mechanism, and its efficient suppression method in Inconel 625 superalloy
39. Influence of heat treatment on Inconel 625 superalloy sheet: carbides, γ'', δ phase precipitation and tensile deformation behavior
40. Decomposition and phase transformation mechanisms of α2 lamellae in β-solidified γ-TiAl alloys
41. High-Strength Near-Beta Titanium Alloy Fabricated by Direct Hot Pressing of the Machining Swarf
42. High-strength and low-dwell-sensitivity titanium alloy showing high tolerance to microcracking under dwell fatigue condition
43. Quantification of α phase strengthening in titanium alloys: Crystal plasticity model incorporating α/β heterointerfaces
44. Influence of silicide and texture on the room temperature deformation size effect of Ti65 alloy sheets/foils and its constitutive model modification
45. Creep anisotropy characteristics and microstructural crystallography of marine engineering titanium alloy Ti6321 plate at room temperature
46. Recent developments in cold dwell fatigue of titanium alloys for aero-engine applications: a review
47. Quasi-in-situ investigation on microstructure degradation of a fully lamellar TiAl alloy during creep
48. Enhanced mechanical properties of a metastable β titanium alloy via optimized thermomechanical processing
49. Formation mechanism of γ twins in β-solidified γ-TiAl alloys
50. Formation of α-segregation and its impact on grain refinement in Ti-47.5Al-5Nb-2.5V-1Cr alloy
Catalog
Books, media, physical & digital resources
Discovery Service for Jio Institute Digital Library
For full access to our library's resources, please sign in.