Search

BackgroundDNA polymerase D (PolD) is the representative member of the D family of DNA polymerases. It is an archaea-specific DNA polymerase required for replication and unrelated to other known DNA polymerases. PolD consists of a heterodimer of two subunits, DP1 and DP2, which contain catalytic sites for 3′-5′ editing exonuclease and DNA polymerase activities, respectively, with both proteins being mutually required for the full activities of each enzyme. However, the processivity of the replicase holoenzyme has additionally been shown to be enhanced by the clamp molecule proliferating cell nuclear antigen (PCNA), making it crucial to elucidate the interaction between PolD and PCNA on a structural level for a full understanding of its functional relevance. We present here the 3D structure of a PolD-PCNA-DNA complex fromThermococcus kodakarensisusing single-particle cryo-electron microscopy (EM).ResultsTwo distinct forms of the PolD-PCNA-DNA complex were identified by 3D classification analysis. Fitting the reported crystal structures of truncated forms of DP1 and DP2 fromPyrococcus abyssionto our EM map showed the 3D atomic structural model of PolD-PCNA-DNA. In addition to the canonical interaction between PCNA and PolD via PIP (PCNA-interacting protein)-box motif, we found a new contact point consisting of a glutamate residue at position 171 in a β-hairpin of PCNA, which mediates interactions with DP1 and DP2. The DNA synthesis activity of a mutant PolD with disruption of the E171-mediated PCNA interaction was not stimulated by PCNA in vitro.ConclusionsBased on our analyses, we propose that glutamate residues at position 171 in each subunit of the PCNA homotrimer ring can function as hooks to lock PolD conformation on PCNA for conversion of its activity. This hook function of the clamp molecule may be conserved in the three domains of life.

Chemical acetylation is postulated to occur in mitochondria. Mitochondrial transcription factor A (TFAM or mtTFA), a mitochondrial transcription initiation factor as well as the major mitochondrial nucleoid protein coating the entire mitochondrial genome, is proposed to be acetylated in animals and cultured cells. This study investigated the properties of human TFAM, in conjunction with the mechanism and effects of TFAM acetylation in vitro. Using highly purified recombinant human TFAM and 3 kb circular DNA as a downsized mtDNA model, we studied how the global TFAM–DNA interaction is affected/regulated by the quantitative TFAM–DNA relationship and TFAM acetylation. Results showed that the TFAM–DNA ratio strictly affects the TFAM property to unwind circular DNA in the presence of topoisomerase I. Mass spectrometry analysis showed that in vitro chemical acetylation of TFAM with acetyl-coenzyme A occurs preferentially on specific lysine residues, including those reported to be acetylated in exogenously expressed TFAM in cultured human cells, indicating that chemical acetylation plays a crucial role in TFAM acetylation in mitochondria. Intriguingly, the modification significantly decreased TFAM’s DNA-unwinding ability, while its DNA-binding ability was largely unaffected. Altogether, we propose TFAM is chemically acetylated in vivo, which could change mitochondrial DNA topology, leading to copy number and gene expression modulation.

Facilitates chromatin transcription (FACT) is a histone chaperone, which accomplishes both nucleosome assembly and disassembly. Our combined cryo-electron microscopy (EM) and native mass spectrometry (MS) studies revealed novel key steps of nucleosome reorganization conducted by a Mid domain and its adjacent acidic AID segment of human FACT. We determined three cryo-EM structures of respective octasomes complexed with the Mid-AID and AID regions, and a hexasome alone. We discovered extensive contacts between a FACT region and histones H2A, H2B, and H3, suggesting that FACT is competent to direct functional replacement of a nucleosomal DNA end by its phosphorylated AID segment (pAID). Mutational assays revealed that the aromatic and phosphorylated residues within pAID are essential for octasome binding. The EM structure of the hexasome, generated by the addition of Mid-pAID or pAID, indicated that the dissociation of H2A-H2B dimer causes significant alteration from the canonical path of the nucleosomal DNA.

DNA polymerase D (PolD), originally discovered in Pyrococcus furiosus, has no sequence homology with any other DNA polymerase family. Genes encoding PolD are found in most of archaea, except for those archaea in the Crenarchaeota phylum. PolD is composed of two proteins: DP1 and DP2. To date, the 3D structure of the PolD heteromeric complex is yet to be determined. In this study, we established a method that prepared highly purified PolD from Thermococcus kodakarensis, and purified DP1 and DP2 proteins formed a stable complex in solution. An intrinsically disordered region was identified in the N-terminal region of DP1, but the static light scattering analysis provided a reasonable molecular weight of DP1. In addition, PolD forms as a complex of DP1 and DP2 in a 1:1 ratio. Electron microscope single particle analysis supported this composition of PolD. Both proteins play an important role in DNA synthesis activity and in 3'-5' degradation activity. DP1 has extremely low affinity for DNA, while DP2 is mainly responsible for DNA binding. Our work will provide insight and the means to further understand PolD structure and the molecular mechanism of this archaea-specific DNA polymerase.

PolyADP-ribosylation (PARylation) is a posttranslational modification that is involved in the various cellular functions including DNA repair, genomic stability, and transcriptional regulation. PARylation is catalyzed by the poly(ADP-ribose) polymerase (PARP) family proteins, which mainly recognize damaged DNA and initiate repair processes. PARP inhibitors are expected to be novel anticancer drugs for breast and ovarian cancers having mutation in BRCA tumor suppressor genes. However the structure of intact (full-length) PARP is not yet known. We have produced and purified the full-length human PARP1 (h-PARP1), which is the major family member of PARPs, and analyzed it with single particle electron microscopy. The electron microscopic images and the reconstructed 3D density map revealed a dimeric configuration of the h-PARP1, in which two ring-shaped subunits are associated with two-fold symmetry. Although the PARP1 is hypothesized to form a dimer on damaged DNA, the quaternary structure of this protein is still controversial. The present result would provide the first structural evidence of the dimeric structure of PARP1.

Filopodia are finger-like protrusions at the leading edge of migrating cells that play a crucial antennal function during cell motility. It is known that actin filaments are bundled hexagonally and provide rigidity to filopodia by virtue of fascin, which plays a central role in actin filament bundling. However, the molecular mechanisms underlying their formation remain unclear. Here, we observed the filopodia of intact whole cells fixed by rapid freezing and revealed their three-dimensional structure by cryo-electron tomography and image processing; the actin filament bundling structure by fascin was clarified at high resolution under physiological conditions. It was found that actin filaments in vivo were more numerous than in bundles reconstructed in vitro, and each filopodial actin filament had limited variability in helical twisting. In addition, statistical analysis of actin filament bundles unveiled their detailed architecture. In filopodia, actin filaments had highly ordered structures, and the shift between cross-links of each adjacent actin filament was approximately 2.7 nm, similar to the monomer repeat of actin filaments. We then proposed a plausible actin-fascin cross-link model at the amino acid level and identified three fascin binding sites on two adjacent actin filaments: one filament bound fascin at two discrete, widely separated regions and the other bound fascin in a single small region. We propose that these two different binding modalities should confer rigid bundles that retain flexibility and dynamic performance. © 2016 Wiley Periodicals, Inc.

In Eukarya and Archaea, the lagging strand synthesis is accomplished mainly by three key factors, DNA polymerase (Pol), flap endonuclease (FEN), and DNA ligase (Lig), in the DNA replication process. These three factors form important complexes with proliferating cell nuclear antigen (PCNA), thereby constructing a platform that enable each protein factor to act successively and smoothly on DNA. The structures of the Pol-PCNA-DNA and Lig-PCNA-DNA complexes alone have been visualized by single particle analysis. However, the FEN-PCNA-DNA complex structure remains unknown. In this report, we for the first time present this tertiary structure determined by single particle analysis. We also successfully visualized the structure of the FEN-Lig-PCNA-DNA complex, corresponding to a putative intermediate state between the removal of the DNA flap by FEN and the sealing of the nicked DNA by Lig. This structural study presents the direct visualization of the handing-over action, which proceeds between different replication factors on a single PCNA clamp bound to DNA. We detected a drastic conversion of the DNA from a bent form to a straight form, in addition to the dynamic motions of replication factors in the switching process.

The centromere is a specific genomic region upon which the kinetochore is formed to attach to spindle microtubules for faithful chromosome segregation. To distinguish this chromosomal region from other genomic loci, the centromere contains a specific chromatin structure including specialized nucleosomes containing the histone H3 variant CENP-A. In addition to CENP-A nucleosomes, we have found that centromeres contain a nucleosome-like structure comprised of the histone-fold CENP-T-W-S-X complex. However, it is unclear how the CENP-T-W-S-X complex associates with centromere chromatin. Here, we demonstrate that the CENP-T-W-S-X complex binds preferentially to ∼ 100 bp of linker DNA rather than nucleosome-bound DNA. In addition, we find that the CENP-T-W-S-X complex primarily binds to DNA as a (CENP-T-W-S-X)2 structure. Interestingly, in contrast to canonical nucleosomes that negatively supercoil DNA, the CENP-T-W-S-X complex induces positive DNA supercoils. We found that the DNA-binding regions in CENP-T or CENP-W, but not CENP-S or CENP-X, are required for this positive supercoiling activity and the kinetochore targeting of the CENP-T-W-S-X complex. In summary, our work reveals the structural features and properties of the CENP-T-W-S-X complex for its localization to centromeres.

Rotation of bacterial flagellar motor is driven by the interaction between the stator and rotor and the driving energy is supplied by ion influx through the stator channel. The stator is composed of the MotA and MotB proteins, which form a hetero-hexameric complex with a stoichiometry of four MotA and two MotB molecules. MotA and MotB are four- and single-transmembrane proteins, respectively. To generate torque, the MotA/MotB stator unit changes its conformation in response to the ion influx and interacts with the rotor protein FliG. Here, we overproduced and purified MotA of the hyperthermophilic bacterium Aquifex aeolicus. A chemical crosslinking experiment revealed that MotA formed a multimeric complex, most likely a tetramer. The three-dimensional structure of the purified MotA, reconstructed by electron microscopy single particle imaging, consisted of a slightly elongated globular domain and a pair of arch-like domains with spiky projections, likely to correspond to the transmembrane and cytoplasmic domains, respectively. We show that MotA molecules can form a stable tetrameric complex without MotB and for the first time, demonstrate the cytoplasmic structure of the stator.

Archaeal NucS nuclease was thought to degrade the single-stranded region of branched DNA, which contains flapped and splayed DNA. However, recent findings indicated that EndoMS, the orthologous enzyme of NucS, specifically cleaves double-stranded DNA (dsDNA) containing mismatched bases. In this study, we determined the structure of the EndoMS-DNA complex. The complex structure of the EndoMS dimer with dsDNA unexpectedly revealed that the mismatched bases were flipped out into binding sites, and the overall architecture most resembled that of restriction enzymes. The structure of the apo form was similar to the reported structure of Pyrococcus abyssi NucS, indicating that movement of the C-terminal domain from the resting state was required for activity. In addition, a model of the EndoMS-PCNA-DNA complex was preliminarily verified with electron microscopy. The structures strongly support the idea that EndoMS acts in a mismatch repair pathway.

SummaryRad51 forms a helical filament on single-stranded DNA and promotes strand exchange between two homologous DNA molecules during homologous recombination. The Swi5-Sfr1 complex interacts directly with Rad51 and stimulates strand exchange. Here we describe structural and functional aspects of the complex. Swi5 and the C-terminal core domain of Sfr1 form an essential activator complex with a parallel coiled-coil heterodimer joined firmly together via two previously uncharacterized leucine-zipper motifs and a bundle. The resultant coiled coil is sharply kinked, generating an elongated crescent-shaped structure suitable for transient binding within the helical groove of the Rad51 filament. The N-terminal region of Sfr1, meanwhile, has an interface for binding of Rad51. Our data suggest that the snug fit resulting from the complementary geometry of the heterodimer activates the Rad51 filament and that the N-terminal domain of Sfr1 plays a role in the efficient recruitment of the Swi5-Sfr1 complex to the Rad51 filaments.

The formation of nonspecific ion channels by small oligomeric amyloid intermediates is toxic to the host's cellular membranes. Thermostable direct hemolysin (TDH) and TDH-related hemolysin (TRH) are major virulence factors of Vibrio parahaemolyticus. We have previously reported the crystal structure of TDH tetramer with the central channel. We have also identified the molecular mechanism underlying the paradoxical responses to heat treatment of TDH, known as the Arrhenius effect, which is the reversible amyloidogenic property. In the present report, we describe the biophysical properties of TRH, which displays 67% amino acid similarity with TDH. Molecular modeling provided a good fit of the overall structure of TDH and TRH. Size-exclusion chromatography, ultracentrifugation, and transmission electron microscopy revealed that TRH formed tetramer in solution. These toxins showed similar hemolytic activity on red blood cells. However, TRH had less amyloid-like structure than TDH analyzed by thioflavin T-binding assay and far-UV circular dichroism spectra. These data indicated that amyloidogenicity upon heating is not essential for the membrane disruption of erythrocytes, but the maintenance of tetrameric structure is indispensable for the hemolytic activity of the TDH and TRH.

Thermostable direct hemolysin (TDH) is a major virulence factor of Vibrio parahaemolyticus that causes pandemic foodborne enterocolitis mediated by seafood. TDH exists as a tetramer in solution, and it possesses extreme hemolytic activity. Here, we present the crystal structure of the TDH tetramer at 1.5 A resolution. The TDH tetramer forms a central pore with dimensions of 23 A in diameter and approximately 50 A in depth. Pi-cation interactions between protomers comprising the tetramer were indispensable for hemolytic activity of TDH. The N-terminal region was intrinsically disordered outside of the pore. Molecular dynamic simulations suggested that water molecules permeate freely through the central and side channel pores. Electron micrographs showed that tetrameric TDH attached to liposomes, and some of the tetramer associated with liposome via one protomer. These findings imply a novel membrane attachment mechanism by a soluble tetrameric pore-forming toxin.

The 3D structure of the ternary complex, consisting of DNA ligase, the proliferating cell nuclear antigen (PCNA) clamp, and DNA, was investigated by single-particle analysis. This report presents the structural view, where the crescent-shaped DNA ligase with 3 distinct domains surrounds the central DNA duplex, encircled by the closed PCNA ring, thus forming a double-layer structure with dual contacts between the 2 proteins. The relative orientations of the DNA ligase domains, which remarkably differ from those of the known crystal structures, suggest that a large domain rearrangement occurs upon ternary complex formation. A second contact was found between the PCNA ring and the middle adenylation domain of the DNA ligase. Notably, the map revealed a substantial DNA tilt from the PCNA ring axis. This structure allows us to propose a switching mechanism for the replication factors operating on the PCNA ring.

The RuvAB complex promotes migration of Holliday junction at the late stage of homologous recombination. The RuvA tetramer specifically recognizes Holliday junction to form two types of complexes. A single tetramer is bound to the open configuration of the junction DNA in complex I, while the octameric RuvA core structure sandwiches the same junction in complex II. The hexameric RuvB rings, symmetrically bound to both sides of RuvA on Holliday junction, pump out DNA duplexes, depending upon ATP hydrolysis. We investigated functional differences between the wild-type RuvA from Thermus thermophilus and mutants impaired the ability of complex II formation. These mutant RuvA, exclusively forming complex I, reduced activities of branch migration and ATP hydrolysis, suggesting that the octameric RuvA is essential for efficient branch migration. Together with our recent electron microscopic analysis, this finding provides important insights into functional roles of complex II in the coordinated branch migration mechanism.

The thermostable direct hemolysin (TDH) is a major virulence factor of Vibrio parahaemolyticus. We have characterized the conformational properties of TDH by small-angle X-ray scattering (SAXS), ultracentrifugation and transmission electron microscopy. Sedimentation equilibrium and velocity studies revealed that the protein is tetrameric in aqueous solvents. The Guinier plot derived from SAXS data provided a radius of gyration of 29.0 A. The elongated pattern with a shoulder of a pair distance distribution function derived from SAXS data suggested the presence of molecules with an anisotropic shape having a maximum diameter of 98 A. Electron microscopic image analysis of the negatively stained TDH oligomer showed the presence of C(4) symmetric particles with edge and diagonal lengths of 65 A and 80 A, respectively. Shape reconstruction was carried out by ab initio calculations using the SAXS data with a C(4) symmetric approximation. These results suggested that the tetrameric TDH assumes an oblate structure. The hydrodynamic parameters predicted from the ab initio model differed slightly from the experimental values, suggesting the presence of flexible segments.

Filopodia are finger-like protrusions at the leading edge of migrating cells that play a crucial antennal function during cell motility. It is known that actin filaments are bundled hexagonally and provide rigidity to filopodia by virtue of fascin, which plays a central role in actin filament bundling. However, the molecular mechanisms underlying their formation remain unclear. Here, we observed the filopodia of intact whole cells fixed by rapid freezing and revealed their three-dimensional structure by cryo-electron tomography and image processing; the actin filament bundling structure by fascin was clarified at high resolution under physiological conditions. It was found that actin filaments in vivo were more numerous than in bundles reconstructed in vitro, and each filopodial actin filament had limited variability in helical twisting. In addition, statistical analysis of actin filament bundles unveiled their detailed architecture. In filopodia, actin filaments had highly ordered structures, and the shift between cross-links of each adjacent actin filament was approximately 2.7 nm, similar to the monomer repeat of actin filaments. We then proposed a plausible actin-fascin cross-link model at the amino acid level and identified three fascin binding sites on two adjacent actin filaments: one filament bound fascin at two discrete, widely separated regions and the other bound fascin in a single small region. We propose that these two different binding modalities should confer rigid bundles that retain flexibility and dynamic performance. © 2016 Wiley Periodicals, Inc.

DNA polymerase requires two processing factors, sliding clamps and clamp loaders, to direct rapid and accurate duplication of genomic DNA. In eukaryotes, proliferating cell nuclear antigen (PCNA), the ring-shaped sliding clamp, encircles double-stranded DNA within its central hole and tethers the DNA polymerases onto DNA. Replication factor C (RFC) acts as the clamp loader, which correctly installs the sliding clamp onto DNA strands in an ATP-dependent manner. Here we report the three-dimensional structure of an archaeal clamp-loading complex (RFC-PCNA-DNA) determined by single-particle EM. The three-dimensional structure of the complex, reconstituted in vitro using a nonhydrolyzable ATP analog, reveals two components, a closed ring and a horseshoe-shaped element, which correspond to PCNA and RFC, respectively. The atomic structure of PCNA fits well into the closed ring, suggesting that this ternary complex represents a state just after the PCNA ring has closed to encircle the DNA duplex.

Filopodia are finger-like protrusions at the leading edge of migrating cells and are crucial for cell motilities as antennae. It is known that actin filaments are bundled hexagonally and provide rigidity to filopodia by fascin, which is an actin filament bundling protein and plays a central role of actin bundling. However, molecular mechanisms of their formation have been still unclear. We, here, observed the filopodia of intact whole cells fixed by rapid freezing and revealed their three-dimensional maps by cryo-electron tomography and image processing; the actin filaments’ bundling structure was clarified at high resolutions under close-to-life conditions. It is found that the actin filaments in vivo were more numerous than those in the bundles reconstructed in vitro, whereas actin filaments and fascin possess dynamic properties in filopodia. In additions, each actin filament in the filopodia showed a slightly loose twist similar to those bundled by fascin in vitro. The cross-linking structures between actin filaments were also observed clearly and were determined to be fascin by comparison with actin and fascin atomic models. Then we identified three actin binding sites of fascin against two adjacent actin filaments: one bound fascin in two binding regions with wide surfaces and the other did in a tiny region. We propose that these two different binding manners between actin and fascin should provide rigid bundles but flexible and dynamic performance.

Background: The Mcm proteins are a family of six homologous proteins (Mcm2–7) that play an important role in DNA replication. They form Mcm4/6/7 and Mcm2/4/6/7 complexes, but their structures are not known. Results: We found that the human Mcm2/4/6/7 tetramer forms a toroidal structure, with a central cavity about 3–4 nm in diameter. Observations were made using electron microscopy, employing the image analysis of single particles. The most predominant averaged image displayed a toroid harbouring four bulges forming corners, one of which was larger than the others. This structure was very similar to the mouse Mcm2/4/6/7 tetramer that was independently prepared and analysed by electron microscopy. These toroidal structures are distinct from that of the Mcm4/6/7 hexamer, which was also examined by electron microscopy. GST(glutathione S-transferase)-pull down and two hybrid experiments suggest that a putative Mcm6-Mcm6 hinge contributes to the formation of the Mcm7/4/6/6/4/7 heterohexamer. Conclusions: The Mcm2/4/6/7 tetramer forms a toroidal structure that is distinct from that of the Mcm4/6/7 hexamer in size and shape.

We present the X-ray structure of the RuvA-RuvB complex, which plays a crucial role in ATP-dependent branch migration. Two RuvA tetramers form the symmetric and closed octameric shell, where four RuvA domain IIIs spring out in the two opposite directions to be individually caught by a single RuvB. The binding of domain III deforms the protruding β hairpin in the N-terminal domain of RuvB and thereby appears to induce a functional and less symmetric RuvB hexameric ring. The model of the RuvA-RuvB junction DNA ternary complex, constructed by fitting the X-ray structure into the averaged electron microscopic images of the RuvA-RuvB junction, appears to be more compatible with the branch migration mode of a fixed RuvA-RuvB interaction than with a rotational interaction mode.

Cyclic GMP phosphodiesterase (PDE6) in rod photoreceptors, a key enzyme in vertebrate phototransduction, consists of two homologous catalytic subunits (Palpha and Pbeta) and two identical regulatory subunits (Pgammas). Pgamma regulates the PDE activity through its direct interaction with transducin. Here, using electron microscopy and image analysis of single particles, we show the three-dimensional organization of the basic form of bovine PDE, Palphabetagammagamma, and compare its average image with those of Pgamma-released PDE. The structure of Palphabetagammagamma appears to be a flattened bell-shape, with dimensions of 150 x 108 x 60A, and with a handle-like protrusion attached to the top of the structure. Except for the protrusion, the organization consists of two homologous structures arranged side by side, with each structure having three distinct regions, showing pseudo twofold symmetry. These characteristics are consistent with a model in which the overall structure of Palphabetagammagamma is determined by hetero-dimerization of Palpha and Pbeta, with each subunit consisting of one catalytic and two GAF regions. A comparison of the average image of Palphabetagammagamma with those of Pgamma-released PDE suggests that Pgamma release does not affect the overall structure of Palphabeta, and that the Palphabeta C-terminus, but not Pgamma, is a determinant for the Palphabeta orientation on carbon-coated grids. These observations suggest that the basic structure of PDE does not change during its regulation, which implies that Palphabeta is regulated by its regional interaction with Pgamma.

Inositol 1,4,5-trisphosphate receptor (IP3R) is a highly controlled calcium (Ca2+) channel gated by inositol 1,4,5-trisphosphate (IP3). Multiple regulators modulate IP3-triggered pore opening by binding to discrete allosteric sites within IP3R. Accordingly we have postulated that these regulators structurally control ligand gating behavior; however, no structural evidence has been available. Here we show that Ca2+, the most pivotal regulator, induced marked structural changes in the tetrameric IP3R purified from mouse cerebella. Electron microscopy of the IP3R particles revealed two distinct structures with 4-fold symmetry: a windmill structure and a square structure. Ca2+ reversibly promoted a transition from the square to the windmill with relocations of four peripheral IP3-binding domains, assigned by binding to heparin-gold. Ca2+-dependent susceptibilities to limited digestion strongly support the notion that these alterations exist. Thus, Ca2+ appeared to regulate IP3 gating activity through the rearrangement of functional domains.

The Escherichia coli RuvB protein is a motor protein that forms a complex with RuvA and promotes branch migration of Holliday junctions during homologous recombination. This study describes the characteristics of two RuvB mutants, I148T and I150T, that do not promote branch migration in the presence of RuvA. These RuvB mutants hydrolyzed ATP and bound duplex DNA with the same efficiency as wild-type RuvB, but the mutants did not form a complex with RuvA and were defective in loading onto junction DNA in a RuvA-assisted manner. A recent crystallographic study revealed that Ile(148) and Ile(150) are in a unique beta-hairpin that protrudes from the AAA(+) ATPase domain of RuvB. We propose that this beta-hairpin interacts with hydrophobic residues in the mobile third domain of RuvA and that this interaction is vital for the RuvA-assisted loading of RuvB onto Holliday junction DNA.

Muscle contraction is regulated by the intracellular Ca(2+ )concentration. In vertebrate striated muscle, troponin and tropomyosin on actin filaments comprise a Ca(2+)-sensitive switch that controls contraction. Ca(2+ )binds to troponin and triggers a series of changes in actin-containing filaments that lead to cyclic interactions with myosin that generate contraction. However, the precise location of troponin relative to actin and tropomyosin and how its structure changes with Ca(2+ )have been not determined. To understand the regulatory mechanism, we visualized the location of troponin by determining the three-dimensional structure of thin filaments from electron cryo-micrographs without imposing helical symmetry to approximately 35 A resolution. With Ca(2+), the globular domain of troponin was gourd-shaped and was located over the inner domain of actin. Without Ca(2+), the main body of troponin was shifted by approximately 30 A towards the outer domain and bifurcated, with a horizontal branch (troponin arm) covering the N and C-terminal regions of actin. The C-terminal one-third of tropomyosin shifted towards the outer domain of actin by approximately 35 A supporting the steric blocking model, however it is surprising that the N-terminal half of tropomyosin shifted less than approximately 12 A. Therefore tropomyosin shifted differentially without Ca(2+). With Ca(2+), tropomyosin was located entirely over the inner domain thereby allowing greater access of myosin for force generation. The interpretation of three-dimensional maps was facilitated by determining the three-dimensional positions of fluorophores labelled on specific sites of troponin or tropomyosin by applying probabilistic distance geometry to data from fluorescence resonance energy transfer measurements.

The limited proteolysis of the Bacillus stearothermophilus pyruvate dehydrogenase complex by V8 protease yields its core structure solely composed of lipoate acetyltransferase (E2) fragments. The changes in the core with guanidine hydrochloride (GdnHCl) were biphasic: below 0.8 M (first) and above 1.0 M (second) GdnHCl. The changes in the first phase were slight but significant: decreases in ellipticity and light scattering, and an increase in E2 activity. Insignificant changes in the molecular shape and size of the core were detected on fluorescence spectroscopy, ultracentrifugation, gel filtration, and electron microscopy. On the other hand, the changes in the second phase were drastic; the core was disassembled and denatured.

The formation of nonspecific ion channels by small oligomeric amyloid intermediates is toxic to the host's cellular membranes. Thermostable direct hemolysin (TDH) and TDH-related hemolysin (TRH) are major virulence factors of Vibrio parahaemolyticus. We have previously reported the crystal structure of TDH tetramer with the central channel. We have also identified the molecular mechanism underlying the paradoxical responses to heat treatment of TDH, known as the Arrhenius effect, which is the reversible amyloidogenic property. In the present report, we describe the biophysical properties of TRH, which displays 67% amino acid similarity with TDH. Molecular modeling provided a good fit of the overall structure of TDH and TRH. Size-exclusion chromatography, ultracentrifugation, and transmission electron microscopy revealed that TRH formed tetramer in solution. These toxins showed similar hemolytic activity on red blood cells. However, TRH had less amyloid-like structure than TDH analyzed by thioflavin T-binding assay and far-UV circular dichroism spectra. These data indicated that amyloidogenicity upon heating is not essential for the membrane disruption of erythrocytes, but the maintenance of tetrameric structure is indispensable for the hemolytic activity of the TDH and TRH.

DNA replication in archaea and eukaryotes is executed by family B DNA polymerases, which exhibit full activity when complexed with the DNA clamp, proliferating cell nuclear antigen (PCNA). This replication enzyme consists of the polymerase and exonuclease moieties responsible for DNA synthesis and editing (proofreading), respectively. Because of the editing activity, this enzyme ensures the high fidelity of DNA replication. However, it remains unclear how the PCNA-complexed enzyme temporally switches between the polymerizing and editing modes. Here, we present the three-dimensional structure of the Pyrococcus furiosus DNA polymerase B-PCNA-DNA ternary complex, which is the core component of the replisome, determined by single particle electron microscopy of negatively stained samples. This structural view, representing the complex in the editing mode, revealed the whole domain configuration of the trimeric PCNA ring and the DNA polymerase, including protein–protein and protein–DNA contacts. Notably, besides the authentic DNA polymerase-PCNA interaction through a PCNA-interacting protein (PIP) box, a novel contact was found between DNA polymerase and the PCNA subunit adjacent to that with the PIP contact. This contact appears to be responsible for the configuration of the complex specific for the editing mode. The DNA was located almost at the center of PCNA and exhibited a substantial and particular tilt angle against the PCNA ring plane. The obtained molecular architecture of the complex, including the new contact found in this work, provides clearer insights into the switching mechanism between the two distinct modes, thus highlighting the functional significance of PCNA in the replication process.

The effect of antibody affinity on molecular forms of immune complexes was investigated by measuring antigen-antibody interactions using surface plasmon resonance (SPR), electrospray ionization time-of-flight mass spectrometry under non-denaturing conditions (MS), analytical ultracentrifugation (AUC), and transmission electron microscopy (TEM). (4-Hydroxy-3-nitrophenyl)acetic acid (NP) of different valences was conjugated to bovine serum albumin (BSA) and these conjugates were used as antigens. In the interaction between N1G9, a low affinity antibody, and NP(7)-BSA, a 1:1 immune complex was detected as the major product and higher molecular weight complexes were not obtained by any of the methods employed. These results suggested that N1G9 predominantly formed an intramolecular divalent complex with NP(7)-BSA using the two Fab arms of an antibody. Although complexes of various sizes were detected by MS, AUC, and TEM in the interaction between C6, a high affinity antibody, and NP(7)-BSA, only 1:1 immune complexes were observed by SPR. These results showed that two NP(7)-BSA molecules cannot simultaneously bind to an antibody, irrespective of antibody affinity strength, when the Fc region is immobilized to a flexible dextran matrix on sensor chip but are able to do so with high affinity antibodies free in solution. The results also showed that the stoichiometry of the antigen-antibody interaction is altered by restricting the movement of the Fc region. Since immunoglobulins exist as antibodies in solution or as B cell receptors on the cell surface, it is suggested that interactions of B cell receptors with polyvalent antigens such as NP-BSA might be different from those of antibodies free in solution.

Proliferating cell nuclear antigen (PCNA) is responsible for the processivity of DNA polymerase. We determined the crystal structure of Pyrococcus furiosus DNA polymerase (PfuPol) complexed with the cognate monomeric PCNA, which allowed us to construct a convincing model of the polymerase-PCNA ring interaction, with unprecedented configurations of the two molecules. Electron microscopic analyses indicated that this complex structure exists in solution. Our structural study revealed that an interaction occurs between a stretched loop of PCNA and the PfuPol Thumb domain, in addition to the authentic PCNA-polymerase recognition site (PIP box). Comparisons of the present structure with the previously reported structures of polymerases complexed with DNA, suggested that the second interaction plays a crucial role in switching between the polymerase and exonuclease modes, by inducing a PCNA-polymerase complex configuration that favors synthesis over editing. This putative mechanism for fidelity control of replicative DNA polymerases is supported by experiments, in which mutations at the second interaction site caused enhancements in the exonuclease activity in the presence of PCNA.

Background Pyrococcus furiosus Hjm (Pfu Hjm) is a structure-specific DNA helicase that was originally identified by in vitro screening for Holliday junction migration activity. It belongs to helicase superfamily 2, and shares homology with the human DNA polymerase Θ (PolΘ), HEL308, and Drosophila Mus308 proteins, which are involved in DNA repair. Previous biochemical and genetic analyses revealed that Pfu Hjm preferentially binds to fork-related Y-structured DNAs and unwinds their double-stranded regions, suggesting that this helicase is a functional counterpart of the bacterial RecQ helicase, which is essential for genome maintenance. Elucidation of the DNA unwinding and translocation mechanisms by Pfu Hjm will require its three-dimensional structure at atomic resolution. Results We determined the crystal structures of Pfu Hjm, in two apo-states and two nucleotide bound forms, at resolutions of 2.0–2.7 Å. The overall structures and the local conformations around the nucleotide binding sites are almost the same, including the side-chain conformations, irrespective of the nucleotide-binding states. The architecture of Hjm was similar to that of Archaeoglobus fulgidus Hel308 complexed with DNA. An Hjm-DNA complex model, constructed by fitting the five domains of Hjm onto the corresponding Hel308 domains, indicated that the interaction of Hjm with DNA is similar to that of Hel308. Notably, sulphate ions bound to Hjm lie on the putative DNA binding surfaces. Electron microscopic analysis of an Hjm-DNA complex revealed substantial flexibility of the double stranded region of DNA, presumably due to particularly weak protein-DNA interactions. Our present structures allowed reasonable homology model building of the helicase region of human PolΘ, indicating the strong conformational conservation between archaea and eukarya. Conclusion The detailed comparison between our DNA-free Pfu Hjm structure and the structure of Hel308 complexed with DNA suggests similar DNA unwinding and translocation mechanisms, which could be generalized to all of the members in the same family. Structural comparison also implied a minor rearrangement of the five domains during DNA unwinding reaction. The unexpected small contact between the DNA duplex region and the enzyme appears to be advantageous for processive helicase activity.

Intrinsically disordered (ID) regions of proteins are recognized to be involved in biological processes such as transcription, translation, and cellular signal transduction. Despite the important roles of ID regions, effective methods to observe these thin and flexible structures directly were not available. Herein, we use high-speed atomic force microscopy (AFM) to observe the heterodimeric FACT (facilitates chromatin transcription) protein, which is predicted to have large ID regions in each subunit. Successive AFM images of FACT on a mica surface, captured at rates of 5-17 frames per second, clearly reveal two distinct tail-like segments that protrude from the main body of FACT and fluctuate in position. Using deletion mutants of FACT, we identify these tail segments as the two major ID regions predicted from the amino acid sequences. Their mechanical properties estimated from the AFM images suggest that they have more relaxed structures than random coils. These observations demonstrate that this state-of-the-art microscopy method can be used to characterize unstructured protein segments that are difficult to visualize with other experimental techniques.

During the late stage of homologous recombination in prokaryotes, RuvA binds to the Holliday junction intermediate and executes branch migration in association with RuvB. The RuvA subunits form two distinct complexes with the Holliday junction: complex I with the single RuvA tetramer on one side of the four way junction DNA, and complex II with two tetramers on both sides. To investigate the functional roles of complexes I and II, we mutated two residues of RuvA (L125D and E126K) to prevent octamer formation. An electron microscopic analysis indicated that the mutant RuvA/RuvB/Holliday junction DNA complex formed the characteristic tripartite structure, with only one RuvA tetramer bound to one side of the Holliday junction, demonstrating the unexpected stability of this complex. The novel bent images of the complex revealed an intriguing morphological similarity to the structure of SV40 large T antigen, which belongs to the same AAA+ family as RuvB.

Ring-shaped sliding clamps and clamp loader ATPases are essential factors for rapid and accurate DNA replication. The clamp ring is opened and resealed at the primer–template junctions by the ATP-fueled clamp loader function. The processivity of the DNA polymerase is conferred by its attachment to the clamp loaded onto the DNA. In eukarya and archaea, the replication factor C (RFC) and the proliferating cell nuclear antigen (PCNA) play crucial roles as the clamp loader and the clamp, respectively. Here, we report the electron microscopic structure of an archaeal RFC–PCNA–DNA complex at 12-Å resolution. This complex exhibits excellent fitting of each atomic structure of RFC, PCNA, and the primed DNA. The PCNA ring retains an open conformation by extensive interactions with RFC, with a distorted spring washer-like conformation. The complex appears to represent the intermediate, where the PCNA ring is kept open before ATP hydrolysis by RFC.

Thermostable direct hemolysin (TDH), a major virulence factor of Vibrio parahaemolyticus, is detoxified by heating at approximately 60-70 degrees C but is reactivated by additional heating above 80 degrees C. This paradoxical phenomenon, known as the Arrhenius effect, has remained unexplained for approximately 100 years. We now demonstrate that the effect is related to structural changes in the protein that produce fibrils. The native TDH (TDHn) is transformed into nontoxic fibrils rich in beta-strands by incubation at 60 degrees C (TDHi). The TDHi fibrils are dissociated into unfolded states by further heating above 80 degrees C (TDHu). Rapid cooling of TDHu results in refolding of the protein into toxic TDHn, whereas the protein is trapped in the TDHi structure by slow cooling of TDHu. Transmission electron microscopy indicates the fibrillar structures of TDHi. The fibrils show both the property of the nucleation-dependent elongation and the increase in its thioflavin T fluorescence. Formation of beta-rich structures of TDH was also observed in the presence of lipid vesicles containing ganglioside G(T1b), a putative TDH receptor. Congo red was found to inhibit the hemolytic activity of TDH in a dose-dependent manner. These data reveal that the mechanism of the Arrhenius effect which is tightly related to the fibrillogenicity of TDH.

The complex of MukF, MukE, and MukB proteins participates in organization of sister chromosomes and partitioning into both daughter cells in Escherichia coli. We purified the MukB homodimer and the MukBEF complex and analyzed them by electron microscopy to compare both structures. A MukB homodimer shows a long rod-hinge-rod v-shape with small globular domains at both ends. The MukBEF complex shows a similar structure having larger globular domains than those of the MukB homodimer. These results suggest that MukF and MukE bind to the globular domains of a MukB homodimer. The globular domains of the MukBEF complex frequently associate with each other in an intramolecular fashion, forming a ring. In addition, MukBEF complex molecules tend to form multimers by the end-to-end joining with other MukBEF molecules in an intermolecular fashion, resulting in fibers and rosette-form structures in the absence of ATP and DNA in vitro.

The Mcm proteins are a family of six homologous proteins (Mcm2-7) that play an important role in DNA replication. They form Mcm4/6/7 and Mcm2/4/6/7 complexes, but their structures are not known.We found that the human Mcm2/4/6/7 tetramer forms a toroidal structure, with a central cavity about 3-4 nm in diameter. Observations were made using electron microscopy, employing the image analysis of single particles. The most predominant averaged image displayed a toroid harbouring four bulges forming corners, one of which was larger than the others. This structure was very similar to the mouse Mcm2/4/6/7 tetramer that was independently prepared and analysed by electron microscopy. These toroidal structures are distinct from that of the Mcm4/6/7 hexamer, which was also examined by electron microscopy. GST(glutathione S-transferase)-pull down and two hybrid experiments suggest that a putative Mcm6-Mcm6 hinge contributes to the formation of the Mcm7/4/6/6/4/7 heterohexamer.The Mcm2/4/6/7 tetramer forms a toroidal structure that is distinct from that of the Mcm4/6/7 hexamer in size and shape.

We present the X-ray structure of the RuvA-RuvB complex, which plays a crucial role in ATP-dependent branch migration. Two RuvA tetramers form the symmetric and closed octameric shell, where four RuvA domain IIIs spring out in the two opposite directions to be individually caught by a single RuvB. The binding of domain III deforms the protruding beta hairpin in the N-terminal domain of RuvB and thereby appears to induce a functional and less symmetric RuvB hexameric ring. The model of the RuvA-RuvB junction DNA ternary complex, constructed by fitting the X-ray structure into the averaged electron microscopic images of the RuvA-RuvB junction, appears to be more compatible with the branch migration mode of a fixed RuvA-RuvB interaction than with a rotational interaction mode.

Reverse gyrase is a type IA topoisomerase, found in various hyperthermophiles and promotes ATP-dependent positive supercoiling of DNA. Electron microscopy combined with single particle analyses revealed the three-dimensional structure of the DNA-free Sulfolobus tokodaii reverse gyrase and two-dimensional average images of both the protein alone and that complexed with double-stranded DNA. The 23A resolution map exhibited a parallelogrammatic morphology of 110 x 87 x 43A, which is in good agreement with the crystal structure of the Archaeoglobus fulgidus reverse gyrase. The average image of the complex revealed that the monomeric enzyme binds DNA duplex. Together with this average image of the complex, the three-dimensional map implies that, at the beginning of the supercoiling reaction, DNA is bound within a 10-20A wide cleft in the helicase-like domain. We also speculate that DNA may pass through a 20A wide hole at the end of the cleft.

An archaeal clamp loader, replication factor C (RFC), consists of two proteins, the small subunit (RFCS) and large subunit (RFCL), whose sequences are both highly homologous to those of the eukaryotic RFC components. We have investigated the oligomeric structure of RFCS from Pyrococcus furiosus by electron microscopy using single-particle analysis. RFCS forms mostly ring-shaped hexamers at pH 9.0, although it tends to form C-shaped tetramers or pentamers at a lower pH (pH 5.5). The three-dimensional (3D) structure of the RFCS hexamer was obtained by random conical tilt reconstruction at 24.0-A resolution. RFCS forms a hexameric ring with outer and inner diameters of 117 and 27 A, respectively, and with a height of about 55 A. The six subunits are arranged in a twisted manner with a sixfold symmetry around the channel. The 3D map revealed that the six subunits are arranged in a head-to-tail configuration. Although the RFC complex consists of RFCS and RFCL in vivo, RFCS alone, together with PCNA, substantially enhanced the DNA synthesizing activity of P. furiosus DNA polymerase I in vitro. The 3D reconstruction of RFCS with catalytic activity provides important insights into the organization mechanism and the functional state of the RFC complex.

In prokaryotes, the RuvA, B, and C proteins play major roles at the late stage of DNA homologous recombination, where RuvB complexed with RuvA acts as an ATP-dependent motor for branch migration. The oligomeric structures of negatively stained and frozen hydrated RuvB from Thermus thermophilus HB8 were investigated by electron microscopy. RuvB oligomers free of DNA formed a ring structure of about 14 nm in diameter. The averaged top view image clearly indicated a sevenfold symmetry, suggesting that it exists as a heptamer. The RuvB oligomers complexed with duplex DNA formed a smaller ring of about 13 nm in diameter. The averaged top view images represented a sixfold symmetry. This difference in oligomerization indicates that the oligomeric structure of RuvB may convert from a heptamer to a hexamer upon DNA binding. In addition, this finding provides the lesson that great care should be taken in investigating the subunit organizations of DNA binding proteins, because their oligomeric states are more sensitive to DNA interactions than expected.

A three-dimensional image of the spinach photosystem II core complex composed of CP47, D1, D2, cytochromeb-559, andpsbI gene product was reconstructed at 20-A resolution from the two-dimensional crystals negatively stained with phosphotungstate. Confirming the previous proposal, the crystal had ap22121symmetry. One PSII core complex was measured to be 80 × 80 A in the membrane plane and 88 A normal to it. The mass distribution was asymmetric about the lipid bilayer, consistent with predictions from the amino acid sequences. The lumenal mass consisted of three domains forming a characteristic triangular platform with another domain on top of it. Three stromal domains were smaller and linearly arranged. Due to strong stain exclusion in the hydrophobic core part of the lipid bilayer, the transmembrane region appeared to be imaged with a reversed contrast. Inverting the contrast resulted in a reasonable density distribution for that part. Thus, though the information on the transmembrane region is limited, the domain structure of the PSII core complex was revealed and allowed us to propose a model for the arrangement of subunits in the PSII core complex.

Photosystem II (PSII) consists of about ten membrane-spanning proteins and 1-3 extrinsic proteins. Recently, two-dimensional structure of PSII has been analyzed by electron microscopy of two-dimensional crystals of the PSII complex containing D1, D2, CP47, cytochrome b 559 , psbI and psbW gene products, to a resolution of 0.8 nm (1,2). In addition, the two-dimensional crystals of PSII containing CP43 were also obtained and its three-dimensional structure was analyzed (3). However, three-dimensional structural analysis of the PSII core complex including all the subunits necessary for oxygen evolution has not been carried out yet, mostly because that the extrinsic proteins are easily released from the PSII complex during crystallization.

Three-dimensional information can be obtained from 2D crystals by collecting electron microscopy data with the specimen tilted at various angles with respect to the electron beam [1]. We made 2D crystals of PSH subcore complex composed of D1, D2, CP47, cytochrome b559 and psbI gene product by a simple dialysis of detergent-solubilized PSII, and reported its non-tilted density map at 20 A resolution constructed from the cryo-electron microscopic image [2]. In the present study, we negatively stained the same 2D crystals with phosphotungustate, and constructed a 3D model of the complex by the tilting method. Due to the strong stain exclusion in the transmembrane region, the structure of a-helices region in the membrane could not be clearly visualized, but we could successfully reconstruct the 3D image of the membrane-protruding part of the complex on both the lumenal and stromal sides.