Search

This paper proposes a novel method using a machine learning-based Adaptive Neuro-Fuzzy Inference System (ANFIS) to optimize Maximum Power Point Tracking (MPPT) in variable-speed Wind Turbines (WT). The ANFIS algorithm, blending artificial neural networks and fuzzy logic, addresses issues with traditional wind speed sensors, such as cost, imprecision, and susceptibility to adverse weather conditions. An initial offline-trained ANFIS is suggested to understand turbine power characteristics, and subsequently estimate varying wind speed, addressing strong nonlinearity due to WT aerodynamics and wind speed fluctuations. A second ANFIS efficiently tracks the maximum power point, overcoming limitations of linear controllers. Implemented in Matlab/Simulink for a 3.5 kW WT, the approach demonstrates effectiveness, precision, and faster response time in wind speed estimation and accurate MPPT compared to alternatives. A notable advantage is its independence from instantaneous wind speed measurement, providing a cost-effective solution for wind energy systems. [ABSTRACT FROM AUTHOR]

This paper proposes firstly a Second Order Sliding Mode Control (SOSMC) based on a Super Twisting Algorithm (STA) (SOSMC-STA) combined with a Direct Field-Oriented Control (DFOC) strategy of a Five-Phase Induction Motor (FPIM). The SOSMC-STA is suggested for overcoming the shortcomings of the Proportional Integral Controller (PIC) and the Conventional Sliding Mode Controller (CSMC). Indeed, the main limitations of the PIC are the slower speed response, the tuning difficulty of its parameters, and the sensitivity to changes in system parameters, including variations in process dynamics, load changes, or changes in setpoint. It is also limited to linear systems. Regarding the CSMC technique, its limitation is the chattering phenomenon, characterized by the rapid switching of the control signal. This phenomenon includes high-frequency oscillations which induce wear and tear on mechanical systems, adversely affecting performance. Secondly, this paper also proposes a Loss Model Controller (LMC) for FPIM energy optimization. Thus, the suggested LMC chooses the optimal flux magnitude required by the FPIM for each applied load torque, which consequently reduces the losses and the FPIM efficiency. The performance of the optimized DFOC-SOSMC-STA based on the LMC is verified using numerical simulation under the Matlab environment. The analysis of the simulation results shows that the DFOC-SOSMC-STA guarantees a high dynamic response, chattering reduction, good precision, and robustness in case of external load or parameter disturbances. Moreover, the DFOC-SOSMC-STA, combined with the LMC, reduces losses and increases efficiency. [ABSTRACT FROM AUTHOR]

The impact of Partial Shading Conditions (PSCs) significantly influences the output of Photovoltaic Systems (PVSs). Under PSCs, the Power-Voltage (P-V) characteristic of the PVS unveils numerous power peaks, inclusive of local maxima and a global maximum. The latter represents the optimum power point. Traditional Maximum Power Point Tracking (MPPT) algorithms struggle to track the Global Maximum Power Point (GMPP). To address this, our study emphasizes the creation of a novel algorithm capable of identifying the GMPP. This approach combines the Cuckoo Search (CS) MPPT algorithm with an Integral Super-Twisting Sliding Mode Controller (STSMC) using their benefits to enhance the PVS performance under PSCs in terms of high efficiency, low power losses, and high-speed convergence towards the GMPP. The STSMC is a second-order Sliding Mode Control strategy that employs a continuous control action that attenuates the "chattering" phenomenon, caused when the first-order SMC technique is employed. Indeed, the proposed CS-STSMC-MPPT algorithm consists of two parts. The first one is based on the CS algorithm used for scanning the power-voltage curve to identify the GMPP, and subsequently generating the associated optimal voltage reference. The second part aims to track the voltage reference by manipulating the duty cycle of the boost converter. The proposed CS-STSMC-MPPT algorithm is featured by its strength against uncertainties and modeling errors. The obtained simulation results underline a high convergence speed and an excellent precision of the proposed method in identifying and tracking the GMPP with high efficiency under varying shading scenarios. For comparative purposes, this method is set against the hybrid CS-Proportional Integral Derivative, the conventional CS, the Particle Swarm Optimization, and the Perturb and Observe algorithms under different PSCs, including zero, weak, and severe shading. Simulation conducted in the Matlab/Simulink environment confirms the superior performance of the proposed CS-STSMC-MPPT algorithm in terms of precision, convergence speed, efficiency, and resilience. [ABSTRACT FROM AUTHOR]

This article aims first to propose an improved space vector modulation–direct torque control in order to enhance the induction motor performance using: (1) a super-twisting controller and (2) a novel model reference adaptive system based on a sliding mode observer. Second, due to the complexity of the suggested control algorithm, this article deals also with a hardware implementation on a field-programmable gate array board. Indeed, the field-programmable gate array is mainly chosen to reduce the execution time, thanks to its parallel processing which significantly improves the quality of the control system by reducing the sampling period, and consequently the delays in the control loop. Besides, the super-twisting controller is proposed to enhance the speed regulation loop which is a second-order sliding mode control technique that uses a continuous control law to prevent the chattering phenomenon induced by the first-order sliding mode control technique. Moreover, the high performance control requires information about the rotor speed which can be obtained by a sensor. Generally, the use of the speed sensor increases the system cost and size, and reduces its system reliability. Therefore, a combination between a model reference adaptive system observer and a sliding mode observer is suggested for speed estimation and overcoming the sensitivity of the classical model reference adaptive system observer against uncertainties and stator resistance variations. The performance of the proposed space vector modulation--direct torque control--super-twisting controller with the model reference adaptive system--sliding mode observer algorithm of an induction motor is verified through simulation, hardware co-simulation and experimental validation utilizing a field-programmable gate array Virtex-5-ML507 board. The performance of the suggested sensorless control method is compared also with other recent published schemes. [ABSTRACT FROM AUTHOR]

In this article, a novel sliding mode adaptation mechanism of a model reference adaptive system speed estimator and a modified sliding mode speed controller are proposed to replace the proportional-integral controller used in the adaptation mechanism of the model reference adaptive system and the proportional-integral speed controller, respectively. The suggested control strategy is designed by sensorless direct torque control with space vector modulation based on a sliding mode speed controller and a model reference adaptive system sliding mode speed estimator. The contribution of this work is the development of one control law based on a modified nonlinear component to overcome the first-order sliding mode control limitations, such as the chattering phenomenon. The performance of the suggested controller-based direct torque control with space vector modulation is verified by digital simulation with different operation conditions, like the abrupt variations in the load torque and the reference speed, using the MATLAB/SIMULINK environment. In fact, such simulation results are experimentally checked utilizing a dSPACE-1104. [ABSTRACT FROM AUTHOR]