Search

In this perspective, the authors give their view on the developments and experiences on communicating on (nano)materials safety. We would like to share our experiences with the scientific community in order to make them useful for future communication activities. We present the long-term work of the science communication projects DaNa, DaNa2.0 and DaNa4.0, running from 2009 to 2023. Starting in the early 2000s with the beginnings of nanotechnology research, communication on the safety of nanomaterials with the public was still very new and faced the projects with many challenges. Today, science communication is indispensable for the dissemination of scientific findings and a fact-based approach like the DaNa "Knowledge Base Materials" creates a trustworthy dialogue with the public. This long-term project series has made a significant contribution to communication on the safety of nanomaterials, perhaps even the largest among publicly funded project series worldwide., Competing Interests: HK is shareholder of NanoCASE GmbH. The remaining authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest., (Copyright © 2024 Kühnel, Krug, Steinbach and Nau.)

Titanium dioxide is a ubiquitous white material found in a diverse range of products from foods to sunscreens, as a pigment and thickener, amongst other uses. Titanium dioxide has been considered no longer safe for use in foods (nano and microparticles of E171) by the European Food Safety Authority (EFSA) due to concerns over genotoxicity. There are however, conflicting opinions regarding the safety of Titanium dioxide. In an attempt to clarify the situation, a comprehensive weight of evidence (WoE) assessment of the genotoxicity of titanium dioxide based on the available data was performed. A total of 192 datasets for endpoints and test systems considered the most relevant for identifying mutagenic and carcinogenic potential were reviewed and discussed for both reliability and relevance (by weight of evidence) and in the context of whether the physico-chemical properties of the particles had been characterised. The view of an independent panel of experts was that, of the 192 datasets identified, only 34 met the reliability and quality criteria for being most relevant in the evaluation of genotoxicity. Of these, 10 were positive (i.e. reported evidence that titanium dioxide was genotoxic), all of which were from studies of DNA strand breakage (comet assay) or chromosome damage (micronucleus or chromosome aberration assays). All the positive findings were associated with high cytotoxicity, oxidative stress, inflammation, apoptosis, necrosis, or combinations of these. Considering that DNA and chromosome breakage can be secondary to physiological stress, it is highly likely that the observed genotoxic effects of titanium dioxide, including those with nanoparticles, are secondary to physiological stress. Consistent with this finding, there were no positive results from the in vitro and in vivo gene mutation studies evaluated, although it should be noted that to definitively conclude a lack of mutagenicity, more robust in vitro and in vivo gene mutation studies would be useful. Existing evidence does not therefore support a direct DNA damaging mechanism for titanium dioxide (nano and other forms)., Competing Interests: Declaration of competing interest The authors declare the following financial interests/personal relationships which may be considered as potential competing interests: Paul Fowler, David Kirkland, Marilyn Aardema, Carol Beevers, Maria Donner, Helinor Johnston, Arne Burlzaff, Rüdiger Battersby, Karin Burnett, Harald Krug and Leon Stankowski Jr report financial support was provided by Titanium Dioxide Manufacturers Association. Andreas Czitch reports a relationship with Sanofi that includes: equity or stocks., (Copyright © 2022 The Authors. Published by Elsevier Inc. All rights reserved.)

Background: Nanomaterials are suspected of causing health problems, as published studies on nanotoxicology indicate. On the other hand, some of these materials, such as nanostructured pyrogenic and precipitated synthetic amorphous silica (SAS) and silica gel, have been used for decades without safety concerns in industrial, commercial, and consumer applications. However, in addition to many in vivo and in vitro studies that have failed to demonstrate the intrinsic toxicity of SAS, articles periodically emerge, in which biological effects of concern have been described. Even though most of these studies do not meet high-quality standards and do not always use equivalent test materials or standardized test systems, the results often trigger substance re-evaluation. To put the results into perspective, an extensive literature study was carried out and an example of amorphous silica will be used to try to unravel the reliability from the unreliable results., Methods: A systematic search of studies on nanotoxicological effects has been performed covering the years 2013 to 2018. The identified studies have been evaluated for their quality regarding material and method details, and the data have been curated and put into a data collection. This review deals only with investigations on amorphous silica., Results: Of 18,162 publications 1,217 have been selected with direct reference to experiments with synthetically produced amorphous silica materials. The assessment of these studies based on defined criteria leads to a further reduction to 316 studies, which have been included in this systematic review. Screening for quality with well-defined quantitative criteria following the GUIDE nano concept reveals only 27.3% has acceptable quality. Overall, the in vitro and in vivo data showed low or no toxicity of amorphous silica. The data shown do not support the hypothesis of dependency of biological effects on the primary particle size of the tested materials., Conclusion: This review demonstrates the relatively low quality of most studies published on nanotoxicological issues in the case of amorphous silica. Moreover, mechanistic studies are often passed off or considered toxicological studies. In general, standardized methods or the Organization for Economic Cooperation and Development (OECD) guidelines are rarely used for toxicological experiments. As a result, the significance of the published data is usually weak and must be reevaluated carefully before using them for regulatory purposes., Competing Interests: SAS for REACh members assisted by critically reviewing the manuscript. Changes and suggestions were only accepted for the scientific content, but beyond that the funders had no influence on the design of the study, in the collection, analyses, or interpretation of data, or in the decision to publish the results. HK is Shareholder of his own company NanoCASE GmbH., (Copyright © 2022 Krug.)

Hazard assessment is the first step in nanomaterial risk assessment. The overall number of studies on the biological effects of nanomaterials or innovative materials is steadily increasing and is above 40,000. Several databases have been established to make the amount of data manageable, but these are often highly specialized or can be used only by experts. This paper describes a new database which uses an already existing data collection of about 35,000 publications. The collection from the first phase between the years 2000 and 2013 contains about 11,000 articles and this number has been reduced by specific selection criteria. The resulting publications have been evaluated for their quality regarding the toxicological content and the experimental data have been extracted. In addition to material properties, the most important value to be extracted is the no-observed-adverse-effect-level (NOAEL) for in vivo and the no-observed-effect-concentration (NOEC) for in vitro studies. The correlation of the NOAEL/NOEC values with the nanomaterial properties and the investigated endpoints has been tested in projects such as the OECD-AOP project, where the available data for inflammatory responses have been analysed. In addition, special attention was paid to titanium dioxide particles and this example is used to show with searches for in vitro and in vivo experiments on possible lung toxicity what a typical result of a database query can look like. In this review, an emerging database is described that contains valuable information for nanomaterial hazard estimation and should aid in the progress of nanosafety research.

Faster, cheaper, sensitive, and mechanisms-based animal alternatives are needed to address the safety assessment needs of the growing number of nanomaterials (NM) and their sophisticated property variants. Specifically, strategies that help identify and prioritize alternative schemes involving individual test models, toxicity endpoints, and assays for the assessment of adverse outcomes, as well as strategies that enable validation and refinement of these schemes for the regulatory acceptance are needed. In this review, two strategies 1) the current nanotoxicology literature review and 2) the adverse outcome pathways (AOPs) framework, a systematic process that allows the assembly of available mechanistic information concerning a toxicological response in a simple modular format, are presented. The review highlights 1) the most frequently assessed and reported ad hoc in vivo and in vitro toxicity measurements in the literature, 2) various AOPs of relevance to inhalation toxicity of NM that are presently under development, and 3) their applicability in identifying key events of toxicity for targeted in vitro assay development. Finally, using an existing AOP for lung fibrosis, the specific combinations of cell types, exposure and test systems, and assays that are experimentally supported and thus, can be used for assessing NM-induced lung fibrosis, are proposed., (© 2021 Her Majesty the Queen in Right of Canada. Small published by Wiley-VCH GmbH. Reproduced with the permission of the Minister of Health Canada.)

Significant advances have been made in the development of Adverse Outcome Pathways (AOPs) over the last decade, mainly focused on the toxicity mechanisms of chemicals. These AOPs, although relevant to manufactured nanomaterials (MNs), do not currently capture the reported roles of size-associated properties of MNs on toxicity. Moreover, some AOs of relevance to airborne exposures to MNs such as lung inflammation and fibrosis shown in animal studies may not be targeted in routine regulatory decision making. The primary objective of the present study was to establish an approach to advance the development of AOPs of relevance to MNs using existing, publicly available, nanotoxicology literature. A systematic methodology was created for curating, organizing and applying the available literature for identifying key events (KEs). Using a case study approach, the study applied the available literature to build the biological plausibility for 'tissue injury', a KE of regulatory relevance to MNs. The results of the analysis reveal the various endpoints, assays and specific biological markers used for assessing and reporting tissue injury. The study elaborates on the limitations and opportunities of the current nanotoxicology literature and provides recommendations for the future reporting of nanotoxicology results that will expedite not only the development of AOPs for MNs but also aid in application of existing data for decision making.

One of the challenges in using in vitro data to understand the potential risks of engineered nanomaterials (ENMs) is that results often differ or are even contradictory among studies. While it is recognized that numerous factors can influence results produced by nanobioassays, there has not yet been a consistently used conceptual framework to identify key sources of variability in these assays. In this paper, we use cause-and-effect analysis to systematically describe sources of variability in four key in vitro nanobioassays: the 2',7'-dichlorofluorescein assay, an enzyme-linked immunosorbent assay for measuring interleukin-8, a flow cytometry assay (Annexin V/propidium iodide), and the Comet assay. These assays measure end points that can occur in cells impacted by ENMs through oxidative stress, a principle mechanism for ENM toxicity. The results from this analysis identify control measurements to test for potential artifacts or biases that could occur during conduct of these assays with ENMs. Cause-and-effect analysis also reveals additional measurements that could be performed either in preliminary experiments or each time the assay is run to increase confidence in the assay results and their reproducibility within and among laboratories. The approach applied here with these four assays can be used to support the development of a broad range of nanobioassays.

Use and production of chemicals and new materials are always reasons for concern especially with regard to human health and the environmental impacts. Over the past few decades occupational safety is a greater focus for toxicologists and of national and international registration programs for new products. Thus, the careful investigation of the biological effects of new chemicals and materials is critical. However, the hype around "The Nanotechnology" has boosted a competition for public funds and thereby the number of publications on this "nanotoxicology" topic has exploded. For more than two decades the public discussion around the special effects of nanomaterials or nanoparticles is ongoing without a final conclusion regarding an existing issue of a "nano-specific effect". Facing the situation of a dramatic increase in the number of publications (>4400 PubMed references in 2017 alone!); the quality of the findings appears to be questionable, particularly with regard to the implementation of risk assessment for nanomaterials. Most of the published nanotoxicology studies are associated with fundamental deficiencies in the experimental design of these investigations, including 1) a lack of rigorous and adequate physicochemical characterization of the test materials; 2) the absence of adequate particle controls; and 3) the implementation of high dose experiments, designed to produce toxicological effects - which are publishable (and sensational). As a consequence, the "toxicology" results have limited utility, and therefore must be critically (re)evaluated. This service is provided by the internet knowledge base DaNa (www.nanoobjects.info). On this website a criteria catalogue for the re-evaluation of scientific publications has been published and if these criteria are utilized > 60 70% of reported study findings are not acceptable and cannot be taken into consideration for risk assessment criteria., (Copyright © 2018 Elsevier B.V. All rights reserved.)

Nanotechnology is closely related to the tailored manufacturing of nanomaterials for a huge variety of applications. However, such applications with newly developed materials are also a reason for concern. The DaNa 2.0 project provides information and support for these issues on the web in condensed and easy-to-understand wording. Thus, a key challenge in the field of advanced materials safety research is access to correct and reliable studies and validated results. For nanomaterials, there is currently a continuously increasing amount of publications on toxicological issues, but criteria to evaluate the quality of these studies are necessary to use them e.g., for regulatory purposes. DaNa 2.0 discusses scientific results regarding 26 nanomaterials based on actual literature that has been selected after careful evaluation following a literature criteria checklist. This checklist is publicly available, along with a selection of standardized operating protocols (SOPs) established by different projects. The spectrum of information is rounded off by further articles concerning basics or crosscutting topics in nanosafety research. This article is intended to give an overview on DaNa 2.0 activities to support reliable toxicity testing and science communication alike., Competing Interests: The authors declare no conflict of interest.

Background: Understanding the interaction of graphene-related materials (GRM) with human cells is a key to the assessment of their potential risks for human health. There is a knowledge gap regarding the potential uptake of GRM by human intestinal cells after unintended ingestion. Therefore the aim of our study was to investigate the interaction of label-free graphene oxide (GO) with the intestinal cell line Caco-2 in vitro and to shed light on the influence of the cell phenotype given by the differentiation status on cellular uptake behaviour., Results: Internalisation of two label-free GOs with different lateral size and thickness by undifferentiated and differentiated Caco-2 cells was analysed by scanning electron microscopy and transmission electron microscopy. Semi-quantification of cells associated with GRM was performed by flow cytometry. Undifferentiated Caco-2 cells showed significant amounts of cell-associated GRM, whereas differentiated Caco-2 cells exhibited low adhesion of GO sheets. Transmission electron microscopy analysis revealed internalisation of both applied GO (small and large) by undifferentiated Caco-2 cells. Even large GO sheets with lateral dimensions up to 10 µm, were found internalised by undifferentiated cells, presumably by macropinocytosis. In contrast, no GO uptake could be found for differentiated Caco-2 cells exhibiting an enterocyte-like morphology with apical brush border., Conclusions: Our results show that the internalisation of GO is highly dependent on the cell differentiation status of human intestinal cells. During differentiation Caco-2 cells undergo intense phenotypic changes which lead to a dramatic decrease in GRM internalisation. The results support the hypothesis that the cell surface topography of differentiated Caco-2 cells given by the brush border leads to low adhesion of GO sheets and sterical hindrance for material uptake. In addition, the mechanical properties of GRM, especially flexibility of the sheets, seem to be an important factor for internalisation of large GO sheets by epithelial cells. Our results highlight the importance of the choice of the in vitro model to enable better in vitro-in vivo translation.

The use of nanotechnology and advanced materials promises to revolutionise many areas of technology and improve our daily life. In that respect, many positive effects on the environment are expected, either directly, by developing new technologies for remediation, filtering techniques or energy generation, or indirectly, by e.g. saving resources due to lower consumption of raw materials, or lower energy and fuel consumption due to reduced weight of vehicles. However, such beneficial effects of new technologies are often confronted by concerns regarding the safety of novel substances or materials. During the past 10 years, great effort has been put into research on potential hazards of nanomaterials towards environmental organisms. As the methodology for reliable assessment of nanomaterials was immature, many studies reporting contradictory results have been published, hindering both risk assessment for nanomaterials, as well as the knowledge communication to all involved stakeholders. Thus, DaNa 2.0 serves as a platform to implement trusted knowledge on nanomaterials for an objective discussion.

The design and use of materials in the nanoscale size range for addressing medical and health-related issues continues to receive increasing interest. Research in nanomedicine spans a multitude of areas, including drug delivery, vaccine development, antibacterial, diagnosis and imaging tools, wearable devices, implants, high-throughput screening platforms, etc. using biological, nonbiological, biomimetic, or hybrid materials. Many of these developments are starting to be translated into viable clinical products. Here, we provide an overview of recent developments in nanomedicine and highlight the current challenges and upcoming opportunities for the field and translation to the clinic.

Development of reliable cell-based nanotoxicology assays is important for evaluation of potentially hazardous engineered nanomaterials. Challenges to producing a reliable assay protocol include working with nanoparticle dispersions and living cell lines, and the potential for nano-related interference effects. Here we demonstrate the use of a 96-well plate design with several measurement controls and an interlaboratory comparison study involving five laboratories to characterize the robustness of a nanocytotoxicity MTS cell viability assay based on the A549 cell line. The consensus EC50 values were 22.1 mg/L (95% confidence intervals 16.9 mg/L to 27.2 mg/L) and 52.6 mg/L (44.1 mg/L to 62.6 mg/L) for positively charged polystyrene nanoparticles for the serum-free and serum conditions, respectively, and 49.7 μmol/L (47.5 μmol/L to 51.5 μmol/L) and 77.0 μmol/L (54.3 μmol/L to 99.4 μmol/L) for positive chemical control cadmium sulfate for the serum-free and serum conditions, respectively. Results from the measurement controls can be used to evaluate the sources of variability and their relative magnitudes within and between laboratories. This information revealed steps of the protocol that may need to be modified to improve the overall robustness and precision. The results suggest that protocol details such as cell line ID, media exchange, cell handling, and nanoparticle dispersion are critical to ensure protocol robustness and comparability of nanocytotoxicity assay results. The combination of system control measurements and interlaboratory comparison data yielded insights that would not have been available by either approach by itself.

Amid growing efforts to advance the replacement, reduction, and refinement of the use of animals in research, there is a growing recognition that in vitro testing of medical devices can be more effective, both in terms of cost and time, and also more reliable than in vivo testing. Although the technological landscape has evolved rapidly in support of these concepts, regulatory acceptance of alternative testing methods has not kept pace. Despite the acceptance by regulators of some in vitro tests (cytotoxicity, gene toxicity, and some hemocompatibility assays), many toxicity tests still rely on animals (irritation, sensitization, acute toxicity, reproductive/developmental toxicity), even where other industrial sectors have already abandoned them. Bringing about change will require a paradigm shift in current approaches to testing - and a concerted effort to generate better data on risks to human health from exposure to leachable chemicals from medical devices, and to boost confidence in the use of alternative methods to test devices. To help advance these ideas, stir debate about best practices, and coalesce around a roadmap forward, the JHU-Center for Alternatives to Animal Testing (CAAT) hosted a symposium believed to be the first gathering dedicated to the topic of in vitro testing of medical devices. Industry representatives, academics, and regulators in attendance presented evidence to support the unique strengths and challenges associated with the approaches currently in use as well as new methods under development, and drew next steps to push the field forward from their presentations and discussion.

Background: Nanoparticle exposure in utero might not be a major concern yet, but it could become more important with the increasing application of nanomaterials in consumer and medical products. Several epidemiologic and in vitro studies have shown that nanoparticles can have potential toxic effects. However, nanoparticles also offer the opportunity to develop new therapeutic strategies to treat specifically either the pregnant mother or the fetus. Previous studies mainly addressed whether nanoparticles are able to cross the placental barrier. However, the transport mechanisms underlying nanoparticle translocation across the placenta are still unknown., Objectives: In this study we examined which transport mechanisms underlie the placental transfer of nanoparticles., Methods: We used the ex vivo human placental perfusion model to analyze the bidirectional transfer of plain and carboxylate modified polystyrene particles in a size range between 50 and 300 nm., Results: We observed that the transport of polystyrene particles in the fetal to maternal direction was significantly higher than for the maternal to fetal direction. Regardless of their ability to cross the placental barrier and the direction of perfusion, all polystyrene particles accumulated in the syncytiotrophoblast of the placental tissue., Conclusions: Our results indicate that the syncytiotrophoblast is the key player in regulating nanoparticle transport across the human placenta. The main mechanism underlying this translocation is not based on passive diffusion, but is likely to involve an active, energy-dependent transport pathway. These findings will be important for reproductive toxicology as well as for pharmaceutical engineering of new drug carriers.

Nanotechnology is a rapidly expanding and highly promising new technology with many different fields of application. Consequently, the investigation of engineered nanoparticles in biological systems is steadily increasing. Questions about the safety of such engineered nanoparticles are very important and the most critical subject with regard to the penetration of biological barriers allowing particle distribution throughout the human body. Such translocation studies are technically challenging and many issues have to be considered to obtain meaningful and comparable results. Here we report on the transfer of polystyrene nanoparticles across the human placenta using an ex vivo human placenta perfusion model. We provide an overview of several challenges that can potentially occur in any translocation study in relation to particle size distribution, functionalization and stability of labels. In conclusion, a careful assessment of nanoparticle properties in a physiologically relevant milieu is as challenging and important as the actual study of nanoparticle-cell interactions itself.

An important consideration in developing standards and regulations that govern the production and use of commercial nanoscale materials is the development of robust and reliable measurements to monitor the potential adverse biological effects of such products. These measurements typically require cell-based and other biological assays that provide an assessment of the risks associated with the nanomaterial of interest. In this perspective, we describe the use of cause-and-effect (C&E) analysis to design robust, high quality cell-based assays to test nanoparticle-related cytotoxicity. C&E analysis of an assay system identifies the sources of variability that influence the test result. These sources can then be used to design control experiments that aid in establishing the validity of a test result. We demonstrate the application of C&E analysis to the commonly used 3-(4,5-dimethylthiazol-2-yl)-5-(3-carboxymethoxyphenyl)-2-(4-sulfophenyl)-2H-tetrazolium (MTS) cell-viability assay. This is the first time to our knowledge that C&E analysis has been used to characterize a cell-based toxicity assay. We propose the use of a 96-well plate layout which incorporates a range of control experiments to assess multiple factors such as nanomaterial interference, pipetting accuracy, cell seeding density, and instrument performance, and demonstrate the performance of the assay using the plate layout in a case study. While the plate layout was formulated specifically for the MTS assay, it is applicable to other cytotoxicity, ecotoxicity (i.e., bacteria toxicity), and nanotoxicity assays after assay-specific modifications.

Models of the outer epithelia of the human body - namely the skin, the intestine and the lung - have found valid applications in both research and industrial settings as attractive alternatives to animal testing. A variety of approaches to model these barriers are currently employed in such fields, ranging from the utilization of ex vivo tissue to reconstructed in vitro models, and further to chip-based technologies, synthetic membrane systems and, of increasing current interest, in silico modeling approaches. An international group of experts in the field of epithelial barriers was convened from academia, industry and regulatory bodies to present both the current state of the art of non-animal models of the skin, intestinal and pulmonary barriers in their various fields of application, and to discuss research-based, industry-driven and regulatory-relevant future directions for both the development of new models and the refinement of existing test methods. Issues of model relevance and preference, validation and standardization, acceptance, and the need for simplicity versus complexity were focal themes of the discussions. The outcomes of workshop presentations and discussions, in relation to both current status and future directions in the utilization and development of epithelial barrier models, are presented by the attending experts in the current report.

The number of studies that have been published on the topic of nanosafety speaks for itself. We have seen an almost exponential rise over the past 15 years or so in the number of articles on nanotoxicology. Although only a couple of hundred papers had appeared on the topic of "Nanomaterials: environmental and health effects" before 2000, this number has exploded to over 10 000 since 2001. Most of these studies, however, do not offer any kind of clear statement on the safety of nanomaterials. On the contrary, most of them are either self-contradictory or arrive at completely erroneous conclusions. Three years ago in this Journal we underscored the deficiencies in the way these studies were designed and pointed out the sources of error in the methods used. Now, on the basis of a comprehensive review of the literature and with the help of selected toxicological end points, we attempt to indicate where the significant weaknesses of these studies lie and what we must improve in the future., (© 2014 The Authors. Published by Wiley-VCH Verlag GmbH & Co. KGaA. This is an open access article under the terms of the Creative Commons Attribution Non-Commercial NoDerivs License, which permits use and distribution in any medium, provided the original work is properly cited, the use is non-commercial and no modifications or adaptations are made.)

Graphing graphene: Because the naming of graphene-based materials (GBMs) has led to confusion and inconsistency, a classification approach is necessary. Three physical-chemical properties of GBMs have been defined by the GRAPHENE Flagship Project of the European Union for the unequivocal classification of these materials (see grid)., (© 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Our expanding ability to handle the "literally invisible" building blocks of our world has started to provoke a seismic shift on the technology, environment and health sectors of our society. During the last two decades, it has become increasingly evident that the "nano-sized" subunits composing many materials—living, natural and synthetic—are becoming more and more accessible for predefined manipulations at the nanosize scale. The use of equally nanoscale sized or functionalised tools may, therefore, grant us unprecedented prospects to achieve many therapeutic aims. In the past decade it became clear that nano-scale surface topography significantly influences cell behaviour and may, potentially, be utilised as a powerful tool to enhance the bioactivity and/ or integration of implanted devices. In this review, we briefly outline the state of the art and some of the current approaches and concepts for the future utilisation of nanotechnology to create biomimetic implantable medical devices and scaffolds for in vivo and in vitro tissue engineering,with a focus on bone. Based on current knowledge it must be concluded that not the materials and surfaces themselves but the systematic biological evaluation of these new material concepts represent the bottleneck for new biomedical product development based on nanotechnological principles., (Copyright © 2013 Wiley Periodicals, Inc., a Wiley Company.)

The release of reactive oxygen species (ROS) during the electron transport of mitochondrial aerobic respiration is the major source of ROS. However, contact between cells and nanoparticles (NPs) can also induce release of ROS, leading to an imbalance towards the pro-oxidative state. At low levels of ROS production, cells initiate a protective response to guarantee their survival, but an excess of ROS can damage cellular compounds such as membranes and various organelles, or directly cause genotoxicity. Thus an elevated level of ROS is an important indicator of cellular stress and an accurate recording of this parameter would be very informative. ROS can be measured by various assays, but all known assays measuring and quantifying ROS possess certain weaknesses. The problems and challenges of quantitatively detecting ROS in vitro using the 2',7'-dichlorodihydrofluorescein (DCF) assay is discussed as an example. In addition, we debate the difficulties in finding a suitable and stable chemical reaction control for the DCF assay (or other ROS-detecting assays). As a conclusion, we believe that using 3-morpholinosydnonimine hydrochloride (Sin-1) as a ROS inducer in the DCF assay is feasible only qualitatively. However, a quantitative measurement of the absolute amount of ROS produced and a quantitative comparison between experiments is (at the moment) impossible.

A comprehensive in vitro assessment of two commercial metal oxide nanoparticles, TiO2 and ZnO, was performed using human monocyte-derived macrophages (HMDM), monocyte-derived dendritic cells (MDDC), and Jurkat T cell leukemia-derived cell line. TiO2 nanoparticles were found to be non-toxic whereas ZnO nanoparticles caused dose-dependent cell death. Subsequently, global gene expression profiling was performed to identify transcriptional response underlying the cytotoxicity caused by ZnO nanoparticles. Analysis was done with doses 1 µg/ml and 10 µg/ml after 6 and 24 h of exposure. Interestingly, 2703 genes were significantly differentially expressed in HMDM upon exposure to 10 µg/ml ZnO nanoparticles, while in MDDCs only 12 genes were affected. In Jurkat cells, 980 genes were differentially expressed. It is noteworthy that only the gene expression of metallothioneins was upregulated in all the three cell types and a notable proportion of the genes were regulated in a cell type-specific manner. Gene ontology analysis revealed that the top biological processes disturbed in HMDM and Jurkat cells were regulating cell death and growth. In addition, genes controlling immune system development were affected. Using a panel of modified ZnO nanoparticles, we obtained an additional support that the cellular response to ZnO nanoparticles is largely dependent on particle dissolution and show that the ligand used to modify ZnO nanoparticles modulates Zn(2+) leaching. Overall, the study provides an extensive resource of transcriptional markers for mediating ZnO nanoparticle-induced toxicity for further mechanistic studies, and demonstrates the value of assessing nanoparticle responses through a combined transcriptomics and bioinformatics approach.

Decades ago the human placenta was thought to be an impenetrable barrier between mother and unborn child. However, the discovery of thalidomide-induced birth defects and many later studies afterwards proved the opposite. Today several harmful xenobiotics like nicotine, heroin, methadone or drugs as well as environmental pollutants were described to overcome this barrier. With the growing use of nanotechnology, the placenta is likely to come into contact with novel nanoparticles either accidentally through exposure or intentionally in the case of potential nanomedical applications. Data from animal experiments cannot be extrapolated to humans because the placenta is the most species-specific mammalian organ (1). Therefore, the ex vivo dual recirculating human placental perfusion, developed by Panigel et al. in 1967 (2) and continuously modified by Schneider et al. in 1972 (3), can serve as an excellent model to study the transfer of xenobiotics or particles. Here, we focus on the ex vivo dual recirculating human placental perfusion protocol and its further development to acquire reproducible results. The placentae were obtained after informed consent of the mothers from uncomplicated term pregnancies undergoing caesarean delivery. The fetal and maternal vessels of an intact cotyledon were cannulated and perfused at least for five hours. As a model particle fluorescently labelled polystyrene particles with sizes of 80 and 500 nm in diameter were added to the maternal circuit. The 80 nm particles were able to cross the placental barrier and provide a perfect example for a substance which is transferred across the placenta to the fetus while the 500 nm particles were retained in the placental tissue or maternal circuit. The ex vivo human placental perfusion model is one of few models providing reliable information about the transport behavior of xenobiotics at an important tissue barrier which delivers predictive and clinical relevant data.

ZnO nanoparticles (NPs) elicit significant adverse effects in various cell types, organisms and in the environment. The toxicity of nanoscale ZnO has often been ascribed to the release of zinc ions from the NPs but it is not yet understood to which extent these ions contribute to ZnO NP toxicity and what are the underlying mechanisms. Here, we take one step forward by demonstrating that ZnO-induced Jurkat cell death is largely an ionic effect involving the extracellular release of high amounts of Zn(II), their rapid uptake by the cells and the induction of a caspase-independent alternative apoptosis pathway that is independent of the formation of ROS. In addition, we identified novel coating strategies to reduce ZnO NP dissolution and subsequent adverse effects.

Although researchers have intentionally produced and used nanomaterials for more than a century, nanotechnology has made its mark in most areas of daily life in the past 20 years. Now thousands of products contain nanoparticles, nanofibers, or nanostructured parts. Because some chemical products have caused severe problems to human health and to the environment, we should consider the overall biological and toxicological effects of nanomaterials as we decide whether to use them in various products. We should also reflect on the mechanisms for making these decisions, which may greatly influence the development, production, and use of such products. The preselection of appropriate materials during the early product design state should allow industry and applied researchers to mitigate the risks of these new materials. However, currently the human and ecological risks of the applied nanomaterials during their life cycle are unknown. A large set of physicochemical characteristics can determine the potential human and environmental exposure to and hazards from nanomaterials. Thus, researchers will need many years to gather and analyze all the data to perform a comprehensive risk assessment for engineered nanomaterials and to develop a sound decision making process. The ideal risk assessment approach would include cost-effective screening processes to target resources toward the risks of greatest concern. The outcome of the risk assessment is only as good as the quality of the data used. Unfortunately, the actual review process of most journals that publish on nanotoxicology focuses on "mechanistic studies and results" rather than a toxicologically relevant outcome. For example, journals often do not include studies that show no effect as worthy of publication ("no-effect-studies" dilemma), which can lead to misleading interpretations of toxicological data for hazard identification. However, even with insufficient data sets, researchers can produce a preliminary comparable risk assessment ("approximate" risk assessment). Researchers have already performed risk-based evaluations of nanomaterials grounded on the comparison of exposure concentrations with no-effect levels (as required for chemical risk assessment), examining generic nanomaterials such as "nano-TiO₂" but not specific forms or modifications. Even though these data sets on hazard and exposure are incomplete, they already provide the basis to illustrate the current state of knowledge and uncertainties. Therefore industry and applied researchers can calculate the probability that an adverse effect might occur and begin to balance the benefits and potential risks of an innovation. Based on the increasing numbers of nanotoxicology publications and funding programs, this Account reviews the decision support approaches that already exist to safely implement engineered nanomaterials during an early phase of innovation.

Metal oxide nanoparticles are widely used in the paint and coating industry as well as in cosmetics, but the knowledge of their possible interactions with the immune system is very limited. Our aims were to investigate if commercially available TiO(2) and ZnO nanoparticles may affect different human immune cells and their production of exosomes, nano-sized vesicles that have a role in cell to cell communication. We found that the TiO(2) or ZnO nanoparticles at concentrations from 1 to 100μg/mL did not affect the viability of primary human peripheral blood mononuclear cells (PBMC). In contrast, monocyte-derived dendritic cells (MDDC) reacted with a dose dependent increase in cell death and caspase activity to ZnO but not to TiO(2) nanoparticles. Non-toxic exposure, 10μg/mL, to TiO(2) and ZnO nanoparticles did not significantly alter the phenotype of MDDC. Interestingly, ZnO but not TiO(2) nanoparticles induced a down regulation of FcγRIII (CD16) expression on NK-cells in the PBMC population, suggesting that subtoxic concentrations of ZnO nanoparticles might have an effect on FcγR-mediated immune responses. The phenotype and size of exosomes produced by PBMC or MDDC exposed to the nanoparticles were similar to that of exosomes harvested from control cultures. TiO(2) or ZnO nanoparticles could not be detected within or associated to exosomes as analyzed with TEM. We conclude that TiO(2) and ZnO nanoparticles differently affect immune cells and that evaluations of nanoparticles should be performed even at subtoxic concentrations on different primary human immune cells when investigating potential effects on immune functions., (Copyright © 2012 Elsevier Inc. All rights reserved.)

Background: Increasing concern has been expressed regarding the potential adverse health effects that may be associated with human exposure to inhaled multi-walled carbon nanotubes (MWCNTs). Thus it is imperative that an understanding as to the underlying mechanisms and the identification of the key factors involved in adverse effects are gained. In the alveoli, MWCNTs first interact with the pulmonary surfactant. At this interface, proteins and lipids of the pulmonary surfactant bind to MWCNTs, affecting their surface characteristics. Aim of the present study was to investigate if the pre-coating of MWCNTs with pulmonary surfactant has an influence on potential adverse effects, upon both (i) human monocyte derived macrophages (MDM) monocultures, and (ii) a sophisticated in vitro model of the human epithelial airway barrier. Both in vitro systems were exposed to MWCNTs either pre-coated with a porcine pulmonary surfactant (Curosurf) or not. The effect of MWCNTs surface charge was also investigated in terms of amino (-NH2) and carboxyl (-COOH) surface modifications., Results: Pre-coating of MWCNTs with Curosurf affects their oxidative potential by increasing the reactive oxygen species levels and decreasing intracellular glutathione depletion in MDM as well as decreases the release of Tumour necrosis factor alpha (TNF-α). In addition, an induction of apoptosis was observed after exposure to Curosurf pre-coated MWCNTs. In triple cell-co cultures the release of Interleukin-8 (IL-8) was increased after exposure to Curosurf pre-coated MWCNTs. Effects of the MWCNTs functionalizations were minor in both MDM and triple cell co-cultures., Conclusions: The present study clearly indicates that the pre-coating of MWCNTs with pulmonary surfactant more than the functionalization of the tubes is a key factor in determining their ability to cause oxidative stress, cytokine/chemokine release and apoptosis. Thus the coating of nano-objects with pulmonary surfactant should be considered for future lung in vitro risk assessment studies.

Tributyltin (TBT) is one of the most toxic compounds produced by man and distributed in the environment. A multitude of toxic activities have been described, for example, immunotoxic, neurotoxic, and endocrine disruptive effects. Moreover, it has been shown for many cell types that they undergo apoptosis after treatment with TBT and the cell death of immune cells could be the molecular background of its immunotoxic effect. As low as 200 nM up to 1 μM of TBT induces all signs of apoptosis in Jurkat T cells within 1 to 24 hrs of treatment. When compared to Fas-ligand control stimulation, the same sequence of events occurs: membrane blebbing, phosphatidylserine externalisation, the activation of the "death-inducing signalling complex," and the following sequence of cleavage processes. In genetically modified caspase-8-deficient Jurkat cells, the apoptotic effects are only slightly reduced, whereas, in FADD-negative Jurkat cells, the TBT effect is significantly diminished. We could show that caspase-10 is recruited by the TRAIL-R2 receptor and apoptosis is totally prevented when caspase-10 is specifically inhibited in all three cell lines.

The transparent and fair characterization of scientific evidence for reporting the results of a hazard assessment is a demanding task. In this article, we present an approach for characterizing evidence--the evidence map approach. The theoretical starting point is to view evidence characterization as a form of argumentation. Thus, evidence maps are designed to depict the evidence base, the pro and con arguments, and the remaining uncertainties, which together lead experts to their conclusions when summarizing and evaluating the scientific evidence about a potential hazard. To illustrate its use, the evidence maps approach is applied to characterizing the health-relevant effects of engineered nanoparticles. Empirical data from an online survey suggests that the use of evidence maps improves the reporting of hazard assessments. Nonexperts prefer to receive the information included in an evidence map in order to come to an informed judgment. Furthermore, the benefits and limitations of evidence maps are discussed in the light of recent literature on risk communication. Finally, the article underlines the need for further research in order to increase quality of evidence reporting., (© 2011 Society for Risk Analysis.)

New properties of engineered nanomaterials raise great expectations for industrial, scientific as well as medical applications. At the same time concerns among consumers regarding the safety aspects of this new technology emerge. Furthermore, among the multitude of published studies, a considerable number do not reveal reliable data. Thus, standardized, validated, reliable, robust, reproducible and intelligent testing strategies are urgently needed that address nanomaterial toxicity. This article discusses the reliability of currently used in vitro toxicity assays. It covers major problems, pitfalls and challenges of assay performance and validation. We recommend a series of different controls to improve the experimental quality and, thus, also the reliability and reproducibility of current in vitro systems. These recommendations consequently applied in the future will increase the safe and sustainable use of nanotechnology.

Nanosilver is one nanomaterial that is currently under a lot of scrutiny. Much of the discussion is based on the assumption that nanosilver is something new that has not been seen until recently and that the advances in nanotechnology opened completely new application areas for silver. However, we show in this analysis that nanosilver in the form of colloidal silver has been used for more than 100 years and has been registered as a biocidal material in the United States since 1954. Fifty-three percent of the EPA-registered biocidal silver products likely contain nanosilver. Most of these nanosilver applications are silver-impregnated water filters, algicides, and antimicrobial additives that do not claim to contain nanoparticles. Many human health standards for silver are based on an analysis of argyria occurrence (discoloration of the skin, a cosmetic condition) from the 1930s and include studies that considered nanosilver materials. The environmental standards on the other hand are based on ionic silver and may need to be re-evaluated based on recent findings that most silver in the environment, regardless of the original silver form, is present in the form of small clusters or nanoparticles. The implications of this analysis for policy of nanosilver is that it would be a mistake for regulators to ignore the accumulated knowledge of our scientific and regulatory heritage in a bid to declare nanosilver materials as new chemicals, with unknown properties and automatically harmful simply on the basis of a change in nomenclature to the term "nano".

The increasing consumption of products containing nanomaterials that can be currently observed and forecasts of new developments and applications fan the fear of individuals and organizations regarding new risks to health. Considering experiences gained from previous technology developments, such fears are not completely unfounded. But are they really justified? And is it justified, moreover, to speak of "nanotoxicology" as a new discipline? This Review seeks to cast light on the phenomena that may occur as nanoobjects interact with cells, tissues, and organisms. Furthermore, we will demonstrate that the many data made available on the biological effects of nanomaterials do not always come from studies that can be considered reliable. We will point out the aspect of reliability with specific examples from the literature and will not address specific (nano)materials. In particular, inadequate methods will be described together with recommendations how to avoid this in the future, thereby contributing to a sustainable improvement of the available data., (Copyright © 2011 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

The close resemblance of carbon nanotubes to asbestos fibers regarding their high aspect ratio, biopersistence and reactivity increases public concerns on the widespread use of these materials. The purpose of this study was not only to address the acute adverse effects of industrially produced multiwalled carbon nanotubes (MWCNTs) on human lung and immune cells in vitro but also to further understand if their accumulation and biopersistence leads to long-term consequences or induces adaptive changes in these cells. In contrast to asbestos fibers, pristine MWCNTs did not induce overt cell death in A549 lung epithelial cells and Jurkat T lymphocytes after acute exposure to high doses of this material (up to 30 μg/ml). Nevertheless, very high levels of reactive oxygen species (ROS) and decreased metabolic activity were observed which might affect long-term viability of these cells. However, the continuous presence of low amounts of MWCNTs (0.5 μg/ml) for 6 months did not have major adverse long-term effects although large amounts of nanotubes accumulated at least in A549 cells. Moreover, MWCNTs did not appear to induce adaptive mechanisms against particle stress in long-term treated A549 cells. Our study demonstrates that despite the high potential for ROS formation, pristine MWCNTs can accumulate and persist within cells without having major long-term consequences or inducing adaptive mechanisms., (© 2010 Elsevier Ireland Ltd. All rights reserved.)

Background: During production and processing of multi-walled carbon nanotubes (MWCNTs), they may be inhaled and may enter the pulmonary circulation. It is essential that interactions with involved body fluids like the pulmonary surfactant, the blood and others are investigated, particularly as these interactions could lead to coating of the tubes and may affect their chemical and physical characteristics. The aim of this study was to characterize the possible coatings of different functionalized MWCNTs in a cell free environment., Results: To simulate the first contact in the lung, the tubes were coated with pulmonary surfactant and subsequently bound lipids were characterized. The further coating in the blood circulation was simulated by incubating the tubes in blood plasma. MWCNTs were amino (NH2)- and carboxyl (-COOH)-modified, in order to investigate the influence on the bound lipid and protein patterns. It was shown that surfactant lipids bind unspecifically to different functionalized MWCNTs, in contrast to the blood plasma proteins which showed characteristic binding patterns. Patterns of bound surfactant lipids were altered after a subsequent incubation in blood plasma. In addition, it was found that bound plasma protein patterns were altered when MWCNTs were previously coated with pulmonary surfactant., Conclusions: A pulmonary surfactant coating and the functionalization of MWCNTs have both the potential to alter the MWCNTs blood plasma protein coating and to determine their properties and behaviour in biological systems.

Background: Humans have been exposed to fine and ultrafine particles throughout their history. Since the Industrial Revolution, sources, doses, and types of nanoparticles have changed dramatically. In the last decade, the rapidly developing field of nanotechnology has led to an increase of engineered nanoparticles with novel physical and chemical properties. Regardless of whether this exposure is unintended or not, a careful assessment of possible adverse effects is needed. A large number of projects have been carried out to assess the consequences of combustion-derived or engineered nanoparticle exposure on human health. In recent years there has been a growing concern about the possible health influence of exposure to air pollutants during pregnancy, hence an implicit concern about potential risk for nanoparticle exposure in utero. Previous work has not addressed the question of whether nanoparticles may cross the placenta., Objective: In this study we investigated whether particles can cross the placental barrier and affect the fetus., Methods: We used the ex vivo human placental perfusion model to investigate whether nanoparticles can cross this barrier and whether this process is size dependent. Fluorescently labeled polystyrene beads with diameters of 50, 80, 240, and 500 nm were chosen as model particles., Results: We showed that fluorescent polystyrene particles with diameter up to 240 nm were taken up by the placenta and were able to cross the placental barrier without affecting the viability of the placental explant., Conclusions: The findings suggest that nanomaterials have the potential for transplacental transfer and underscore the need for further nanotoxicologic studies on this important organ system.

Carbon nanotubes (CNTs) are among the most promising novel nanomaterials and their unique chemical and physical properties suggest an enormous potential for many areas of research and applications. As a consequence, the production of CNT-based material and thus the occupational and public exposure to CNTs will increase steadily. Although there is evidence that nanoparticles (NPs) can enter the nervous system via the blood stream, olfactory nerves or sensory nerves in the skin, there is still only little knowledge about possible toxic effects of CNTs on cells of the nervous system. The goal of the present study was to analyse the influences of single-walled CNTs (SWCNTs) with different degrees of agglomeration on primary cultures derived from chicken embryonic spinal cord (SPC) or dorsal root ganglia (DRG). As measured by the Hoechst assay treatment of mixed neuro-glial cultures with up to 30mug/mL SWCNTs significantly decreased the overall DNA content. This effect was more pronounced if cells were exposed to highly agglomerated SWCNTs as compared to better dispersed SWCNT-bundles. Using a cell-based ELISA we found that SWCNTs reduce the amount of glial cells in both peripheral nervous system (PNS) and central nervous system (CNS) derived cultures. Neurons were only affected in DRG derived cultures, where SWCNT treatment resulted in a decreased number of sensory neurons, as measured by ELISA. Additionally, whole-cell patch recordings revealed a diminished inward conductivity and a more positive resting membrane potential of SWCNT treated DRG derived neurons compared to control samples. The SWCNT suspensions used in this study induced acute toxic effects in primary cultures from both, the central and peripheral nervous system of chicken embryos. The level of toxicity is at least partially dependent on the agglomeration state of the tubes. Thus if SWCNTs can enter the nervous system at sufficiently high concentrations, it is likely that adverse effects on glial cells and neurons might occur.

Since the discovery of fullerenes in 1985, these carbon nanospheres have attracted attention regarding their physico/chemical properties. Despite little knowledge about their impact on the environment and human health, the production of fullerenes has already reached an industrial scale. However, the toxicity of C(60) is still controversially discussed. The aim of this study was to clarify the biological effects of tetrahydrofuran (THF) suspended C(60) fullerene in comparison to water stirred C(60) fullerene suspensions. Beyond that, we analyzed the effects on the Crustacea Daphnia magna an indicator for ecotoxicological effects and the human lung epithelial cell line A549 as a simplified model for the respiratory tract. We could demonstrate that water-soluble side products which were formed in THF nC(60) suspension were responsible for the observed acute toxic effects, whereas fullerenes themselves had no negative effect regardless of the preparative route on either A549 cell in vitro or D. magna in vivo.

Nanoparticulate materials and, among them, carbon nanotubes (CNTs) are new types of material that are generating high expectations owing to their unique physical, chemical and optical properties. Owing to the predictably increasing production of various types of CNTs and other nanoparticle-containing products, it is expected that environmental and public exposure to engineered nanoparticles will also increase in parallel. If and how far CNTs are able to affect health is, at present, discussed controversially. In this article, we summarize how CNTs are produced and processed to identify critical parameters, which have to be included in the toxicological assessment. A special effort is made to address the adverse effects of CNTs on cell physiology. Furthermore, we report on CNTs in medical applications and we discuss two selected examples of prospective applications of CNTs in nanomedicine, which have realistic chances of achieving ready-to-market products in just a few years.

Elevated concentrations of particulate matter in the environmental atmosphere constitute a potential risk to human health. In vitro cell-based assays are therefore necessary to evaluate the toxicological potential of inhaled particulate emissions. In this study, the exposure of a co-culture cell model at the air-liquid interface was used to evaluate the dose-dependent biological effects of a test aerosol. The CULTEX system was used to expose human cells to an environmentally-relevant aerosol, generated from fly ash collected in a commercial municipal waste incinerator and resuspended in filtered air. Human bronchial epithelial cells, BEAS-2B, co-cultured with differentiated THP-1 macrophages growing on Transwell inserts, were employed in the bioassay. Analyses of cell viability, interleukin-8 (IL-8) release, intracellular glutathione, and haeme oxygenase-1 enzyme expression were performed. Transportation of the cells and exposure to humidified filtered air or the test aerosol, at 100 ml/min for 1 to 6 hours, were well tolerated by the cells and had no effect on their viability. Levels of IL-8 release and haeme oxygenase-1 expression were elevated by exposure to fly ash aerosol as a function of time, but not by exposure to clean air. For IL-8 release, a dose-dependent effect was demonstrated with the assumption that the deposited mass of the particles correlated with exposure time. Exposure to the test aerosol did not affect the intracellular glutathione concentration. This in vitro approach simulates particle deposition in the human lung more realistically than does submerged exposure, and it preserves the inherent properties of the particles. It shows promise for use to detect particulate emissions which are potentially detrimental to human health.

Efficient drug delivery is essential for many therapeutic applications. Some cell-penetrating peptides, peptide mimetics, and peptoids express transport function that, however, lack in most cases specific intracellular destination. In this study, carrier-peptoids with either amino or guanidinium side chains, were investigated with regard to their cellular uptake, toxicity, and intracellular localization. Transport specifically to the cytosol or to the nuclei was observed, thus providing a powerful tool for targeted drug delivery.

Poly-brominated flame retardants are ecotoxicologically relevant chemicals that can show high persistency in environmental samples and bioaccumulation in marine and fresh water animals. One of the most widely used compound is tetrabromobisphenol A (TBBPA). Until today, the toxicological data are rather fragmentary. Our studies on acute and sub-acute toxic effects with established cell lines demonstrate that TBBPA interferes with cellular signaling pathways. Cell viability is significantly reduced in a time- and concentration-dependent manner. The observed EC50 for rat kidney cells (NRK) was 52 microM (27 mg/l), 168 microM (90 mg/l) for A549 human lung cells, and 200 microM (108 mg/l) for Cal-62 human thyroid cells, respectively. The comparison of TBBPA with the non-brominated substance bisphenol A (BPA) clearly demonstrates that only the brominated compound exerts these effects on proliferation and cell viability. Cell cycle regulation was influenced considerably in Cal-62 cells, showing an explicit G2/M arrest in the cell cycle at TBBPA concentrations higher than 75 microM. Cellular signaling pathways directly connected to these affected parameters, e.g. the mitogen activated protein kinase (MAPK) cascades, are partly influenced in a cell specific and dose dependent manner. The extracellular-signal regulated kinase (ERK) is deactivated in NRK and A549 cells and activated in Cal-62 cells with increasing TBBPA concentrations.

The platinum group elements (PGE) Pt, Pd and Rh are increasingly emitted into the environment by automobile catalytic converters. Whereas the biological availability of PGE to plants and animals has been demonstrated, only few studies concentrate on the influence of PGE on a cellular level. The effects of Pt, Pd and Rh compared with Cd, Ni and Cr on cell viability and oxidative stress response using soluble metal salts were studied in the human bronchial epithelial cell line BEAS-2B. Whilst Rh(III) showed little influence, both Pt(II) and Pt(IV) as well as Pd(II) had significant effects on cell viability at levels comparable to Cd(II) and Cr(VI). Arranging metal species in order of increasing toxicity as determined by LC50 yields: Rh(III)=1.2 mmol/L

For many therapeutic applications, it has become more and more important to find synthetic compounds that have the ability to transport a variety of drugs and cargo molecules into cells and tissues. Like arginine-rich cell-penetrating peptides (CPPs), it is already known that peptide mimetics such as beta-peptides and peptoids can also express a transport function. In this study, ten fluorophore-labeled chiral and achiral peptoids with different backbone lengths and side chains as well as three peptoids coupled to a therapeutically active porphyrin moiety were prepared using a highly modular solid-phase synthesis (SPP) approach. To compare the structural determinants with the cellular uptake efficiency, all peptoids were analyzed by live cell imaging. All cells show an even vesicular distribution of the internalized peptoids, also revealing that a vesicular escape into the cytosol was stronger for peptoids with longer backbones. Moreover, the uptake efficiency correlated with both the incubation time and the given concentration. Toxicology tests and uptake experiments with porphyrin-coupled peptoids indicate their suitability for application as robust and readily available drug delivery systems or intracellular probes.

Today nanosciences are experiencing massive investment worldwide although research on toxicological aspects of these nano-sized particles has just begun and to date, no clear guidelines exist to quantify the effects. In the present study, we focus on carbon nanotubes (CNTs), which represent one of the most widely investigated carbon nanoparticles. The present data indicate that CNTs are able to cross the cell membrane of rat macrophages (NR8383) and, therefore, might have an influence on cell physiology and function. NR8383 and human A549 lung cells were incubated with commercial single-walled (NT-1) and multi-walled (NT-2, NT-3) CNTs, carbon black and quartz as reference particles as well as an acid-treated single-walled CNT preparation (SWCNT a.t.) with reduced metal catalyst content. We did not observe any acute toxicity on cell viability (WST-1, PI-staining) upon incubation with all CNT products. None of the CNTs induced the inflammatory mediators NO, TNF-alpha and IL-8. A rising tendency of TNF-alpha release from LPS-primed cells due to CNT treatment could be observed. We detected however, a dose- and time-dependent increase of intracellular reactive oxygen species and a decrease of the mitochondrial membrane potential with the commercial CNTs in both cell types after particle treatment whereas incubation with the purified CNTs (SWCNT a.t.) had no effect. This leads us to the conclusion that metal traces associated with the commercial nanotubes are responsible for the biological effects.

Metal oxides may hold, as nanosized particles, a toxic potential to human health and the environment that is not present in the bulk material. Due to the high surface-to-volume ratio, small amounts can lead to strong oxidative damage within biological systems, impairing cellularfunctions as a consequence of their high surface reactivity. We report here on a new nanosized V203 material that has a needle-like structure with diameters of less than 30 nm and variable lengths. The potentiated toxicity of nanoscale vanadium oxide (V203) compared to bulk material is demonstrated here in human endo- and epithelial lung cells, and might be due to the higher catalytic surface of the particles. Reduction in cell viability is almost ten times stronger and starts with lowest concentrations of "nanoscaled" material (10 microg/mL). Vanadium oxide leads to an induction of heme oxygenase 1 (HO-1) in a dose dependent manner in ECV304 cells whereas a reduction in protein levels can be observed for the epithelial cells (A549). Lipid peroxidation can be observed also for "nanoscaled" vanadium oxide to a much stronger extent in macrophages (RAW cells) than for bulk material. The observed effects can not only be explained by oxidation from V2O3 to V2O5 as there are significant differences between the novel nano vanadium and all used bulk materials (V203 and V205). It appears rather to be a nanoeffect of a high surface reactivity, here coupled with a yet unknown toxicity potentiating effect of a technically important catalyst.