Search

Objective : Toward the ultimate goal of cuff-less blood pressure (BP) trend tracking via pulse transit time (PTT) using wearable ballistocardiogram (BCG) signals, we present a unified approach to the gating of wearable BCG and the localization of wearable BCG waves. Methods : We present a unified approach to localize wearable BCG waves suited to various gating and localization reference signals. Our approach gates individual wearable BCG beats and identifies candidate waves in each wearable BCG beat using a fiducial point in a reference signal, and exploits a pre-specified probability distribution of the time interval between the BCG wave and the fiducial point in the reference signal to accurately localize the wave in each wearable BCG beat. We tested the validity of our approach using experimental data collected from 17 healthy volunteers. Results : We showed that our approach could localize the J wave in the wearable wrist BCG accurately with both the electrocardiogram (ECG) and the wearable wrist photoplethysmogram (PPG) signals as reference, and that the wrist BCG-PPG PTT thus derived exhibited high correlation to BP. Conclusion : We demonstrated the proof-of-concept of a unified approach to localize wearable BCG waves suited to various gating and localization reference signals compatible with wearable measurement. Significance : Prior work using the BCG itself or the ECG to gate the BCG beats and localize the waves to compute PTT are not ideally suited to the wearable BCG. Our approach may foster the development of cuff-less BP monitoring technologies based on the wearable BCG.

The objective of this study was to investigate the efficacy of pulse transit time (PTT)-pulse wave analysis (PWA) fusion in cuff-less blood pressure (BP) trend tracking based on the wearable wrist ballistocardiogram (BCG). We constructed PTT and 36 candidate BCG PWA features based on the BCG and photoplethysmogram (PPG) signals acquired at the wrist. We performed a model-based analysis to select 6 candidate BCG PWA features most sensitive to BP. We aggregated the 6 BCG PWA features into novel predictors of diastolic, systolic, and pulse BP (DP, SP, and PP) orthogonal to PTT by covariance-maximizing dimensionality reduction. Then, we evaluated and compared the efficacy of BCG PTT and BCG PTT-PWA fusion in tracking the trend of DP, SP, and PP. Unique innovations of this study, generalizable to a range of physiological signals beyond the BCG, are (i) the systematic selection of PWA features based on model-based analysis and (ii) the development of PWA-based BP predictors orthogonal to PTT. Using the experimental wrist BCG and PPG signals collected from 23 human subjects, we demonstrated that (i) BCG PTT-PWA fusion may significantly outperform BCG PTT; (ii) PTT may play the primary role in tracking BP while BCG PWA features may still have an independent and complementary value (especially in tracking PP); and (iii) model-based selection of BCG PWA features can enhance the robustness of BP trend tracking based on BCG PTT-PWA fusion.

By virtue of its direct association with the cardiovascular (CV) functions and compatibility to unobtrusive measurement during daily activities, the limb ballistocardiogram (BCG) is receiving an increasing interest as a viable means for ultra-convenient CV health and disease monitoring. However, limited insights on its physical implications have hampered disciplined interpretation of the BCG and systematic development of the BCG-based approaches for CV health monitoring. In this study, a mathematical model that can predict the limb BCG in responses to the arterial blood pressure (BP) waves in the aorta was developed and experimentally validated. The validated mathematical model suggests that (i) the limb BCG waveform reveals the timings and amplitudes associated with the aortic BP waves; (ii) mechanical filtering exerted by the musculoskeletal properties of the body can obscure the manifestation of the arterial BP waves in the limb BCG; and (iii) the limb BCG exhibits meaningful morphological changes in response to the alterations in the CV risk predictors. The physical insights garnered by the analysis of the mathematical model may open up new opportunities toward next generation of the BCG-based CV healthcare techniques embedded with transparency, interpretability, and robustness against the external variability.

This paper describes photoplethysmography (PPG)-based pulse direction determination algorithm on a site of the radial artery using a wrist band. It has been well known that PPG is susceptible to noise and motion artifacts in the mobile environment and many research efforts have been made to focus on rejection of the noise and motion artifacts. However, no research has been performed to find PPG pulses when PPG is inverted by wrist movement. We present an algorithm, which accurately yields which direction PPG pulses face regardless of wrist movement. The algorithm is one step closer to robust real-time PPG pulse direction determination for continuous PPG monitoring regardless of body movements.

Advances in digital communications and signal processing have enabled the adaptation of advanced communication techniques in wireless LAN (WLAN) standards. Among those advanced techniques, multiple-input-multipleoutput (MIMO) is now part of the high throughput (HT) WLAN standard, a.k.a. IEEE 802.11n. With the completion of the IEEE 802.11n specification, the IEEE 802.11 working group (WG) is now working on a new amendment to achieve very high throughput (VHT) in the gigabit range.. The move to higher data rates is enabled by introducing wider bandwidth, downlink multi-user MIMO (MU-MIMO), and higher modulation and coding schemes (MCS). This paper focuses the use of group membership and identifiers for managing downlink transmissions using MU-MIMO. Downlink MU-MIMO allows a WLAN access point to transmit to multiple stations simultaneously. Group Membership and identifiers are used to signal target stations together with their positions and the number of spatial streams intended for each of them in the downlink transmission. A description of the Group ID concept and its application to the VHT specification is discussed here. A method for assigning stations' position to Group IDs is introduced and its performance is examined.