Search

This research concerns a stylistic and archaeometric study of an ancient marble female bust recently discovered by the Trapani Lombardo family of Reggio Calabria (Southern Italy) and delivered to the Superintendency of Archaeology, Fine Arts, and Landscape for the metropolitan city of Reggio Calabria and Vibo Valentia (SABAP). Based on the first technical, stylistic, and iconographic observations made by the competent bodies, it is a half-length portrait bust from the Roman era, which precisely had the function of faithfully reproducing the physiognomy of the depicted subject. The research aimed to establish the authenticity of the artwork and the origin of the raw material, providing indications about the textural and compositional features and of the alteration products as well as identifying traces of any previous restoration interventions. For these purposes, after a preliminary assessment of the state of conservation of the bust using visual inspections supported by a handheld digital microscope, different analytical techniques, including polarized optical microscopy (OM), scanning electron microscopy coupled with energy dispersive spectrometry (SEM-EDX), carbon and oxygen stable isotope ratio determinations (δ13C and δ18O), X-ray diffraction (XRD), and Fourier transform infrared spectroscopy (FT-IR), were used. The results highlighted the originality of the artifact, thus remarking on the importance of the precious archaeological find to be included in the cataloging of tangible assets in the panorama of Italian cultural heritage.

A multi-analytical approach was employed for the first time to study the stone materials, wall paintings and related degradation forms in the Cathedral of Gerace (Reggio Calabria, southern Italy). With an area of around 1898 square meters, the Gerace Cathedral is the largest in Calabria: its construction dates back to the Norman era (between 1085 and 1120), and currently displays distinct features of Greek and Latin architectural orders. Despite having undergone numerous restorations, the church perfectly preserves its original buildings materials. Following an extensive site inspection campaign, supported by the experts dealing with building restoration, several areas were selected for analyses. Both in situ investigations and laboratory tests were carried out on micro-fragments using Non-Destructive and Micro-Destructive Techniques (NDTs and MDTs). The first step involved an inspection through InfraRed Thermography (IRT) in order to map the internal walls of the Cathedral and identify zones with potential degradation phenomena. Subsequently, a more in-depth study was designed based on the thermographic results, and laboratory tests were carried out on micro-fragments and powders to characterize the different kinds of materials (i.e., stones, mortars, plasters and pigments) and decay agents (i.e., salts and efflorescences). Thirty-one samples were subjected to a complementary analytical approach which included Polarizing Optical Microscopy (POM), Ion Chromatography (IC), X-Ray Powder Diffraction (XRPD) and Scanning Electron Microscopy (SEM) coupled with microanalysis (EDS). The results allowed us to preliminarily characterize the different materials from which the Cathedral was built, determine its state of conservation and provide a better knowledge of the entire building, revealing details not visible to the naked eye which are important for future conservation interventions. As for the state of conservation, the integrated use of various techniques enabled the detection of rising damp generally correlated with the occurrence of water infiltration and migration phenomena which appear to affect a large part of the building, causing noticeable damage (i.e., loss of surface material, micro-cracks, white salt efflorescence, etc.). The characterization of the materials carried out on mortars, plasters, and pigments also confirmed the local origin of the raw materials. However, the provenance of the studied marbles and crystalline limestones, could not be established and, therefore, further in-depth studies are required.

In the last decades there have been several studies on cultural heritage regarding the performance of protective and consolidating coatings for the prevention of decay. A coating must have several characteristics such as: efficiency, breathability, and must be durable and reversible. In this research work we tried to verify the performance of a commercial protective product such as Fosbuild FBLE 200, which is composed of a TiO2 nanopowder dispersed in an aqueous solution of an acrylic polymer. This product, which exhibits depolluting, antimicrobial, water-repellent and self-cleaning characteristics, has been applied on different lithotypes such as: Carrara marble, Noto and Comiso stone and exhibited in two different outdoor environments such as Catania and Palermo. These two cities are mostly affected by pollution produced by vehicular traffic; moreover, Catania is also affected by pollution produced by the activity of Mount Etna.

The purpose of this study is to demonstrate how a disciplinary approach is an excellent tool in the field of forensic investigations, capable of answering the questions posed by the institution and obtaining as different and as much information as possible on the findings analyzed, reconstructing the history of often decontextualized artifacts. In the present work, the results of the FTIR-ATR and SEM-EDX analyses performed on micro-fragments and powders taken from a marble bas-relief, seized by the Cosenza Carabinieri Unit for the Protection of Cultural Heritage and Anti-Counterfeiting (Calabria, Italy), are reported.

The Western civilization is deeply rooted in the Ancient Greece culture, political, scientific, technological and philosophic knowledge were born in this epoch. Their diffusion was improved upon by the Greek expansionist policy in colonies of Magna Graecia in Mediterranean Basin, leaving important archaeological traces for the community. In this context, the European project &ldquo, MAGNA, on the route from Greece to Magna Graecia&rdquo, seeks to develop a transnational thematic touristic route between Greece and the Ionian coast of Calabria (Southern Italy), an ancient Magna Graecia colony, on the basis of cultural and historical connections between these two Mediterranean areas. The project aims to promote the touristic development of the Greek and Calabrian archaeological sites through dissemination activities. These will concern scientific subjects regarding the conservation of cultural heritage, both in sub-aerial and underwater environments, and study of the sea floor, and pollution of seawater by microplastics. This touristic product consists of cruises on a ship equipped with scientific instruments that offer unique cultural experiences, accompanied by multimedia supports. Experts drive people in the proposed activities, creating more awareness of sustainable and responsible tourism.

This study aims to assess the different decay phenomena affecting the Cosenza Cathedral façade (Calabria, South Italy) through the evaluation of the relative damage indices. For this goal, a multidisciplinary approach was applied exploiting both nondestructive and microdestructive techniques. Such a combination enabled proposing an intervention priority scale that can be helpful to institutions when planning a prompt restoration intervention. The results suggest the efficiency of this approach to obtain a multidisciplinary diagnostic and conservation system for the management and valorization of the Cultural Heritage also in terms of monitoring, maintenance, and selection of the most suitable restoration procedures over time.

This research has focused on the assessment of the compositional features and mechanical and antifouling performances of two different mortars formulated for an underwater setting, and which contain Mg(OH)2 as an antifouling agent. Regarding the mechanical characterization, the uniaxial compressive strength and flexural strength were measured. The composition of the materials was explored by differential thermal/thermogravimetric analysis (DTA-TG), X-ray diffraction analysis (XRPD), and scanning electronic microscopy (SEM) coupled with EDS microanalysis. The assessment of the biological colonization was evaluated with colorimetric analysis and image analysis. The results suggest that both mortars have good mechanical resistance once set underwater. Moreover, the adding of Mg(OH)2 improves the resistance toward biofouling; this was observed both in laboratory and sea-exposed specimens.

Black crusts are typical decay forms on calcareous rocks in polluted urban environments. Their origin is due to “sulphation” reaction of calcium carbonate substrates (CaCO3), as a consequence of pH value decrease caused by SO2 in the polluted atmosphere. They can be therefore defined as a passive air pollution sampler. For the purpose of this work, samples from the historic center of Venice were analyzed. The city of Venice suffers in particular maritime and industrial pollution (Marghera industrial zone). By means of minero-petrographic and geochemical analyses, it was possible to obtain information on the mineralogy of the crust and its interaction with the underlying substrates, other than useful information on the chemical composition in terms of major and traces elements linked to the various sources of urban pollution.

Neutron radiography (NR) was here applied to study the effects of two different commercially available consolidants on the water absorption properties in a particular type of limestone (biocalcarenite), known as Pietra d’Aspra stone, which is one of the most extensively used lithotypes in Sicilian Baroque buildings. Our attention was mainly focused on the evaluation, using a fast and nondestructive visualization of water motion through capillarity, of the effectiveness of such layers as consolidating agents in view of preserving and maintaining both old and modern structures. The biocalcarenite was treated with nanosilica (Nano Estel®) and nanolime (CaLoSil®) by brushing it until full saturation, and then artificially weathered by salt crystallization and temperature/relative humidity jumps. Liquid distribution and height of the water front were monitored as a function of time. Significant differences in the water suction behavior among all the investigated samples were highlighted, which allowed us to gain insight into the coating/substrate interaction mechanisms which regulate the fluid mobility inside the porous network of the limestone.

The extractive capability of soluble salts in poultices treatments currently used in mortar conservation (ArbocelTM plus sepiolite; ArbocelTM, sepiolite and sand; Westox-Cocoon®) were tested to evaluate their efficiency and compatibility with specific mortar substrate. The pore size distribution of the experimental mortar substrate and of the blank dried poultices were preliminarily accomplished by mercury intrusion porosimetry (MIP). Desalination tests were carried out on specifically-formulated mortars after capillary absorption of Na2SO4 0.3 M solution. The efficiency of salt extraction was measured by means of electrical conductivity meter and ion chromatography. Among the tested products, Westox-Cocoon® showed the best performance in terms of the ability to extract soluble salts. It is the only poultice with a porosity distribution characterised by predominantly large macropores (20–30 µm), which guarantees it an extraordinary efficiency in the first phase of the extraction process (wetting/dissolving). This last aspect provides a useful term of comparison for conservators who actually use these products and a base of operational protocol more suitable to the needs of the restoration site.

In the field of stone restoration, an unresolved issue is represented by the removal of iron stains from stone substrates. This study deals with a comparative study of the efficacy of several formulations in removing iron-stains from marble. These formulations are mostly based on chelating agents (ammonium thioglycolate, ammonium citrate, L-cysteine and DL methionine), which can form stable complexes with iron. Two sets of experiments have been carried out. Powdered calcium carbonate has been mixed with ferric hydroxide, then the mixture has been put in contact with the formulations, then the amount of removed iron has been evaluated. Another experimentation has been carried out on marble specimens artificially stained with rust. Removing tests have been performed, and their efficiency has been evaluated by measuring the colorimetric variations of the surfaces and the variation of the porous structure. The use of cysteine together with sodium dithionite solution showed the best results; moreover this formulation is the most eco-friendly solution, both for the restores and for the environment.