Search

We present the analysis of the spin signals obtained in NiFe based metallic lateral spin valves. We exploit the spin dependent diffusive equations in both the conventional 1D analytic modeling as well as in 3D Finite Element Method simulations. Both approaches are used for extracting the spin diffusion length $l_{sf}^{N}$ and the effective spin polarization $P_{eff}$ in Py/Al, Py/Cu and Py/Au based lateral nano-structures at both $300\,K$ and $77\,K$. Both the analytic modeling and 3D Finite Element Method simulations give consistent results. Combination of both models provides a powerful tool for reliable spin transport characterization in all metallic spin valves and gives an insight into the spin/charge current and spin accumulations 3D distributions in these devices. We provide the necessary ingredients to develop the 3D finite element modeling of diffusive spin transport., Comment: 8 pages, 6 figures

Due to the difficulty to grow high quality semiconductors on ferromagnetic metals, the study of spin diffusion transport in Si was only limited to lateral geometry devices. In this work, by using ultra-high vacuum wafer-bonding technique, we have successfully fabricated metal semiconductor metal CoFeB/MgO/Si/Pt vertical structures. We hereby demonstrate pure spin-current injection and transport in the perpendicular current flow geometry over a distance larger than 2\mu m in n-type Si at room temperature. In those experiments, a pure propagating spin-current is generated via ferromagnetic resonance spin-pumping and converted into a measurable voltage by using the inverse spin-Hall effect occurring in the top Pt layer. A systematic study by varying both Si and MgO thicknesses reveals the important role played by the localized states at the MgO/Si interface for the spin-current generation. Proximity effects involving indirect exchange interactions between the ferromagnet and the MgO/Si interface states appears to be a prerequisite to establish the necessary out-of-equilibrium spin-population in Si under the spin-pumping action.

We present measurements of pure spin current absorption on lateral spin valves. By varying the width of the absorber we demonstrate that spin current absorption measurements enable to characterize efficiently the spin transport properties of ferromagnetic elements. The analytical model used to describe the measurement takes into account the polarization of the absorber. The analysis of the measurements allows thus determining the polarization and the spin diffusion length of a studied material independently, contrarily to most experiments based on lateral spin valves where those values are entangled. We report the spin transport parameters of some of the most important materials used in spinorbitronics (Co60Fe40, Ni81Fe19, Co, Pt, and Ta), at room and low (10 K) temperatures., Comment: Physical Review B, In press

We present measurements of the Spin Hall Effect (SHE) in AuW and AuTa alloys for a large range of W or Ta concentrations by combining experiments on lateral spin valves and Ferromagnetic-Resonance/spin pumping technique. The main result is the identification of a large enhancement of the Spin Hall Angle (SHA) by the side-jump mechanism on Ta impurities, with a SHA as high as + 0.5 (i.e $50\%$) for about 10\% of Ta. In contrast the SHA in AuW does not exceed + 0.15 and can be explained by intrinsic SHE of the alloy without significant extrinsic contribution from skew or side-jump scattering by W impurities. The AuTa alloys, as they combine a very large SHA with a moderate resistivity (smaller than $85\,\mu\Omega.cm$), are promising for spintronic devices exploiting the SHE., Comment: 6 pages, 4 figures

We experimentally investigate the current-induced magnetization reversal in Pt/[Co/Ni]$_3$/Al multilayers combining the anomalous Hall effect and magneto-optical Kerr effect techniques in crossbar geometry. The magnetization reversal occurs through nucleation and propagation of a domain of opposite polarity for a current density of the order of 0.3 TA/m$^2$. In these experiments we demonstrate a full control of each stage: i)the {\O}rsted field controls the domain nucleation and ii) domain-wall propagation occurs by spin torque from the Pt spin Hall effect. This scenario requires an in-plane magnetic field to tune the domain wall center orientation along the current for efficient domain wall propagation. Indeed, as nucleated, domain walls are chiral and N\'eel like due to the interfacial Dzyaloshinskii-Moriya interaction., Comment: 5 pages, 3 figures

The knowledge of the spin diffusion length $\lambda_{A}$ is a prerequisite for the estimation of the spin Hall angle. We investigate spin current absorption of materials with small $\lambda_{A}$ using AuW stripes inserted in lateral spin-valves. Width variations of the AuW stripe lead to drastic changes of the spin absorption, which cannot be explained by conventional analysis. We show that the spin-current polarization and the spin accumulation attenuation in the vicinity of the spin absorber must to be precisely taken into account for accurate estimation of $\lambda_{A}$. We propose an analytical model supported by numerical calculations that allows to extract proper $\lambda_{A}$ values of spin Hall effect materials.

Spin injection and detection in Co60Fe40-based all-metallic lateral spin-valves have been studied at both room and low temperatures. The obtained spin signals amplitudes have been compared to that of identical Ni80Fe20-based devices. The replacement of Ni80Fe20 by CoFe allows increasing the spin signal amplitude by up to one order of magnitude, thus reaching 50 m{\Omega} at room temperature. The spin signal dependence with the distance between the ferromagnetic electrodes has been analyzed using both a 1D spin transport model and finite elements method simulations. The enhancement of the spin signal amplitude when using CoFe electrodes can be explained by a higher effective polarization., Comment: 8 pages and 4 figures

The understanding and calculation of spin transport are essential elements for the development of spintronics devices. Here, we propose a simple method to calculate analytically the spin accumulations, spin currents and magnetoresistances in complex systems. This can be used both for CPP experiments in multilayers and for multiterminal nanostructures made of semiconductors, oxides, metals and carbon allotropes., Comment: 12 pages and 7 figures

We report an experimental study of a gold-tungsten alloy (7% at. W concentration in Au host) displaying remarkable properties for spintronics applications using both magneto-transport in lateral spin valve devices and spin-pumping with inverse spin Hall effect experiments. A very large spin Hall angle of about 10% is consistently found using both techniques with the reliable spin diffusion length of 2 nm estimated by the spin sink experiments in the lateral spin valves. With its chemical stability, high resistivity and small induced damping, this AuW alloy may find applications in the nearest future.

Through combined ferromagnetic resonance, spin-pumping and inverse spin Hall effect experiments in Co|Pt bilayers and Co|Cu|Pt trilayers, we demonstrate consistent values of spin diffusion length $\ell_{\rm sf}^{\rm Pt}=3.4\pm0.4$ nm and of spin Hall angle $\theta_{\rm SHE}^{\rm Pt}=0.051\pm0.004$ for Pt. Our data and model emphasize on the partial depolarization of the spin current at each interface due to spin-memory loss. Our model reconciles the previously published spin Hall angle values and explains the different scaling lengths for the ferromagnetic damping and the spin Hall effect induced voltage., Comment: 6 pages, 3 figures (main text) and 8 pages supplementary. Published with small modifications in Phys. Rev. Lett

We have undertaken a thorough dynamical investigation of five extrasolar planetary systems using extensive numerical experiments. The systems Gl 777 A, HD 72659, Gl 614, 47 Uma and HD 4208 were examined concerning the question of whether they could host terrestrial like planets in their habitable zones (=HZ). First we investigated the mean motion resonances between fictitious terrestrial planets and the existing gas giants in these five extrasolar systems. Then a fine grid of initial conditions for a potential terrestrial planet within the HZ was chosen for each system, from which the stability of orbits was then assessed by direct integrations over a time interval of 1 million years. The computations were carried out using a Lie-series integration method with an adaptive step size control. This integration method achieves machine precision accuracy in a highly efficient and robust way, requiring no special adjustments when the orbits have large eccentricities. The stability of orbits was examined with a determination of the Renyi entropy, estimated from recurrence plots, and with a more straight forward method based on the maximum eccentricity achieved by the planet over the 1 million year integration. Additionally, the eccentricity is an indication of the habitability of a terrestrial planet in the HZ; any value of e>0.2 produces a significant temperature difference on a planet's surface between apoapse and periapse. The results for possible stable orbits for terrestrial planets in habitable zones for the five systems are summarized as follows: for Gl 777 A nearly the entire HZ is stable, for 47 Uma, HD 72659 and HD 4208 terrestrial planets can survive for a sufficiently long time, while for Gl 614 our results exclude terrestrial planets moving in stable orbits within the HZ., Comment: 14 pages, 18 figures submitted to A&A