Search

Climate change has become a global issue in the 21st century due to the excessive use of non-renewable energy sources. To mitigate this issue, the world has been shifting towards green growth. For this purpose, researchers and policymakers are struggling to explore the factors that significantly impact green growth. Although several determinants of green growth have been investigated in the available literature, the impact of (dis)-aggregated natural resources rents (i.e., minerals rent, coal rent, oil rent, natural gas rent, and total natural resources rent) have been scantly investigated. To fill this gap, this study aims to examine the impact of coal rent, oil rent, minerals rent, natural gas rent, and total natural resources rent on the green growth in G7 countries. The findings from the panel ARDL approach elucidate that coal rent, natural gas rent, and total natural resources rent have a negative impact on green growth in the long-run. Further, oil rent has a positive impact, while minerals rent has an insignificant impact on green growth in the long-run. The study proposes several policy recommendations based on the findings.

Abstract Background Triple Negative Breast Cancer (TNBC) is a particular type of breast cancer with the highest mortality rate. Essential oils are concerned more and more as potential anti-cancer drugs. Methods TNBC cells were treated with different concentrations of navel orange peel essential oil (NOPEO), and then a variety of experiments were performed to investigate the changes in the growth and progression of TNBC cells. MTT assay was performed to detect the proliferation of TNBC cells. The changes of cell cycle and apoptosis were analyzed by FACS. In order to explored the migration of TNBC cells, scratch wound assay was carried out. Western blotting and qPCR were used to examine the expression of proteins and mRNA of related genes. Furthermore, RNA-seq was used to analyze the altered genes and explored the possible signal pathway. Results NOPEO demonstrated dose- and time-dependent suppression of TNBC cell growth. TNBC cells showed an increased percentage of G2/M-phase cells and the protein levels of CyclinB1 and CyclinD1 were decreased after NOPEO treatment. The apoptotic cells were increased in the NOPEO treated TNBC cells. The migration mobility was significantly inhibited by NOPEO. In total, 1376 genes were found to be up-regulated and 1335 genes were down-regulated after NOPEO treatment. According to KEGG and GO pathways, the differentially expressed genes were related to MAPK, Jak/stat and FoxQ signaling pathways. Conclusion This investigation explored the bio-activity and molecular mechanisms of NOPEO against TNBC cells. These results indicated that NOPEO could suppress TNBC growth and migration perhaps via the MAPK and Jak/stat signaling pathways, which may provide theoretical reference for anticancer drug development. NOPEO may be a potential natural product for the chemotherapeutic of TNBC.

Abstract Constructing composite solid electrolytes (CSEs) integrating the merits of inorganic and organic components is a promising approach to developing high‐performance all‐solid‐state lithium metal batteries (ASSLMBs). CSEs are now capable of achieving homogeneous and fast Li‐ion flux, but how to escape the trade‐off between mechanical modulus and adhesion is still a challenge. Herein, a strategy to address this issue is proposed, that is, intercalating highly conductive, homogeneous, and viscous‐fluid ionic conductors into robust coordination laminar framework to construct laminar solid electrolyte with homogeneous and fast Li‐ion conduction (LSE‐HFC). A 9 µm‐thick LSH‐HFC, in which poly(ethylene oxide)/succinonitrile is adsorbed by coordination laminar framework with metal–organic framework nanosheets as building blocks, is used here as an example to determine the validity. The Li‐ion transfer mechanism is verified and works across the entire LSE‐HFC, which facilitates homogeneous Li‐ion flux and low migration energy barriers, endowing LSE‐HFC with high ionic conductivity of 5.62 × 10−4 S cm−1 and Li‐ion transference number of 0.78 at 25 °C. Combining the outstanding mechanical strength against punctures and the enhanced adhesion force with electrodes, LSE‐HFC harvests uniform Li plating/stripping behavior. These enable the realization of high‐energy‐density ASSLMBs with excellent cycling stability when being assembled as LiFePO4/Li and LiNi0.6Mn0.2Co0.2O2/Li cells.

Tetraarylmethanes (TAMs) contain a carbon atom bound to four aryl groups. They have found diverse applications in chemistry, materials science, chemical biology and medicinal chemistry because of their unique 3-dimensional structures. As a reflection of the high demand for TAMs, over 32,000 unique TAMs have been prepared. The distinct structures of TAMs and the crowded nature of the central carbon atom require different strategies for their syntheses. Herein we present the first review on the synthesis of TAMs, from classical approaches to modern methods, including enantioselective syntheses of TAMs. We provide a critical evaluation of methods and highlight important directions for future research into the synthesis of this aesthetically pleasing and very useful class of spherical structures.

Study region: Poyang Lake and East Dongting Lake, China. Study focus: On the basis of data on the extent of the inundation of water bodies, the water level, and DEM data, this study constructed an hourly flood inundation dataset (PDFID) for the East Dongting Lake and Poyang Lake regions with a 10 m resolution and a coverage area of >5000 km2 from 2012 to 2022 by using the RFim model and the U-net model. Validation of the results on Sentinel-1 SAR images and Sentinel-2 MSI optical images showed that the overall accuracy of the dataset ranged from 88% to 97%, with a kappa coefficient ranging from 0.601 to 0.932. The accuracy for the East Dongting Lake region ranged from 88% to 97%, with a kappa coefficient of >0.67, and for the Poyang Lake region, the accuracy ranged from 89% to 97%, with a kappa coefficient of >0.6. New hydrological insights for the region: Flood inundation datasets with a high spatiotemporal resolution and long time series enable us to analyze and comprehend floods’ processes, patterns, and dynamics, facilitating the enhanced development and management of flood prevention and mitigation strategies. However, they have yet to be made available. Thus, this study can provide a fundamental data source for analytical mining and predicting the flooding processes in basins.

Cathode materials have been playing an important role in the development of high-energy, safe and low-cost lithium-ion batteries. However, the widely used single-phase cathode materials are facing great challenges in solving the mileage and safety problems related to electric vehicles due to their inherent structural defects. Intergrown design of bulk structure is believed to be one of the most fundamental ways to improve structural stability and capacity for cathode materials. Due to the diversity of structural configurations, the systematic understanding is still lack for the intergrown structures of different combinations. Therefore, it is very desirable, but also of great importance to summarize the current progress and challenges for intergrown cathodes. In this review, we comprehensively reviewed the design and synthesis methods of intergrown cathodes including layered-spinel intergrown structures, layered-rocksalt intergrown structures, and spinel-rocksalt intergrown structured cathode materials. The charge compensation mechanism of intergrown cathodes with different structural configurations was analyzed in depth, and a targeted optimization schematic diagram was also proposed. Finally, combined with advanced characterization techniques, the understanding of the structural changes has been deepened for the intergrown cathodes during the electrochemical process. It is hoped this review should shed light on the development of advanced cathode materials for the next-generation Li-ion batteries.

Optical lattices have been widely used from classical to quantum physics. The tunable and scalable fabrication of lattices would be of great significance in lattice‐based multipartite applications. This work demonstrates first that a circular Airy beam (CAB), which has the peculiar properties of self‐healing and abrupt autofocusing, can be used to generate two‐dimensional (2D) optical lattices in propagation when encoded by a programmable spatial mask, resulting in the formation of large‐scale and tunable optical lattices with both axis and axial symmetry, and even high‐orbital kaleidoscope shapes. The efficient diffraction of CAB during the spatial crosstalk with the mask enables the realization of tunable lattices with rich periodicity and complexity. The study shows a flexible method to manipulate lattices with large‐scale and versatile structures for potential applications in integrated and scalable optical and photonic devices.

Layered Li-rich oxides have attracted much attention because of higher capacity than that of traditional layered oxides (more than 250 mAh g−1). However, the intrinsic issues of Li-rich cathode materials suffer from lattice oxygen loss, poor rate capability, voltage fade, and limited cycle life. To tackle these problems, the Li-rich cathode containing intergrown layer and spinel phases was proposed, and this heterostructure material meets the requirements of high energy and stable surface with a fast Li+ diffusion channel. Herein, we review the recent progress and in-depth understanding about heterostructure including microstructure and morphology, performance of advancement and degradation mechanisms, and modification strategies. Special attention is given to the high-performance energy mechanism as follows: (a) spinel phase and oxygen vacancy jointly enhance the lattice structure and prevent the irreversible oxygen release, (b) higher capacity is achieved by promotion of activation of Li2MnO3 phase and control of the activation rate to realize stable long-term cyclability, and (c) spinel phase provides the 3D interconnected Li+ diffusion channels and protects the surface region from side reactions. The other issue that aroused interest is the undesirable changes of phase transition and degradation mechanisms as follows: (a) the key reconstruction process is to produce a “good” spinel to maintain the surface and interior structure stability. (b) It is significant to figure out the structure degradation and phase transition mechanism in the cycled heterostructure. This review aims to provide inspiration and opportunities for the design of high-energy-density cathode materials, thereby bridging the gap between laboratory research and practical battery applications.

Abstract As an important part of electric vehicles, lithium-ion battery packs will have a certain environmental impact in the use stage. To analyze the comprehensive environmental impact, 11 lithium-ion battery packs composed of different materials were selected as the research object. By introducing the life cycle assessment method and entropy weight method to quantify environmental load, a multilevel index evaluation system was established based on environmental battery characteristics. The results show that the Li–S battery is the cleanest battery in the use stage. In addition, in terms of power structure, when battery packs are used in China, the carbon footprint, ecological footprint, acidification potential, eutrophication potential, human toxicity cancer and human toxicity noncancer are much higher than those in the other four regions. Although the current power structure in China is not conducive to the sustainable development of electric vehicles, the optimization of the power structure is expected to make electric vehicles achieve clean driving in China.

Molybdenum and molybdenum alloys prepared by the powder metallurgy method are widely used in metallurgy, machinery, chemical industry, aviation and nuclear industry, attributing to the outstanding mechanical properties at elevated temperatures. The mechanical properties of molybdenum alloys can be improved by solid-solution strengthening, second phase strengthening, fine grain strengthening, and other strengthening methods, broadening the application of molybdenum alloys. The research progress of molybdenum alloys prepared by powder metallurgy was introduced in this paper, including the powder preparation method, pressing process, and bulk sintering process. Moreover, the methods and mechanisms of strengthening and toughening for the molybdenum alloys were discussed in details. Finally, the development direction of molybdenum alloys prepared by powder metallurgy method was prospected to provide some ideas for the design and preparation of the molybdenum alloys.

Abstract Achieving satisfactory performance for a solid‐state Na‐metal battery (SSNMB) with an inorganic solid electrolyte (SE), especially under freezing temperatures, poses a challenge for stabilizing a Na‐metal anode. Herein, this challenge is addressed by utilizing a Natrium super ionic conductor (NASICON) NASICON‐type solid electrolyte, enabling the operation of a rechargeable SSNMB over a wide temperature range from −20 to 45 °C. The interfacial resistance at the Na metal/SE interface is only 0.4 Ω cm2 at 45 °C and remains below 110 Ω cm2 even at −20 °C. Remarkably, long‐term Na‐metal plating/stripping cycles lasting over 2000 h at −20 °C are achieved with minimal polarization voltages at 0.1 mA cm−2. Further analysis reveals the formation of a uniform Na3−xCaxPO4 interphase layer at the interface, which significantly contributes to the exceptional interfacial performance observed. By employing a Na3V1.5Al0.5(PO4)3 cathode, the full battery system demonstrates excellent adaptability to low temperatures, exhibiting a capacity of 80 mA h g−1 at −20 °C over 50 cycles and retaining a capacity of 108 mAh g−1 (88.5% of the capacity at 45 °C) at 0 °C over 275 cycles. This research significantly reduces the temperature threshold for SSNMB operation and paves the way toward solid‐state batteries suitable for all‐season applications.

This paper based on the first-principles simulations sheds light on the chalcogenide-defected behavior of the Janus SnSSe monolayer and the sensing property of the defected-SnSSe monolayer upon three typical thermal runaway fault gases, namely H2, CO and C2H2. Results indicate that the Se-vacancy is more likely to be formed in a SnSSe monolayer, and the Se–SnSSe monolayer performs physisorption, with adsorption energies of −0.14, −0.61 and −0.37 eV for three systems, and electron-donating property, contributing 0.047, 0.087 and 0.070 e to such three gases. The band structure and work function analyses reveal the desirable potential of Se–SnSSe monolayer as a resistance-type or WF-based sensor for CO detection. Also, the recovery property is analyzed to consider the reusability of such sensing material. Besides, the applied biaxial strains reveal that Se–SnSSe monolayer performs high and tunable sensitivity for these gas species, especially for H2 and C2H2 detections. This work paves the way to explore SnSSe-based material for gas sensing application in many typical fields involving H2, CO and C2H2 detection, which is also guidable to explore the sensing potential of many other Janus 2D materials.

It is recognized that a city with a livable environment can bring happiness to residents. In this study, we explored the social media users’ emotional states in their current living spaces and found out the relationship between the social media users’ emotions and urban livability. We adopt six urban livability indicators (including education, medical services, public facilities, leisure places, employment, and transportation) to construct city livable indices. Also, the Analytic Hierarchy Process (AHP) spatial statistic method is applied to identify and analyze the different habitable regions of Wuhan City. In terms of citizen’s emotion analysis, we use Long Short-Term Memory (LSTM) neural network to analyze the Weibo text and obtain the Weibo users’sentiment scores. The correlation analysis of residents’ emotions and city livability results shows a positive correlation between the livable city areas (i.e., the area with higher livable ranking indices) and Weibo users’ sentiment scores (with a Pearson correlation coefficient of 0.881 and P-Value of 0.004). In other words, people who post Weibo in high livability areas of Wuhan express more positive emotional states. Still, emotion distribution varies in different regions, which is mainly caused by people’s distribution and the diversity of the city’s functional areas.

The soil contamination caused by the discharge of cadmium (Cd) from coal mining activities has aroused continuous attention due to the detrimental effects on the human health. This study aimed to investigate the characteristics on distribution of Cd in soils and its accumulation in wheat grains under wheat-cultivation system, and further assess the human health risks to adults and children. 58 soils and wheat samples in pairs from Linhuan coal mining area, Anhui Province were collected and analyzed. Results showed that the concentrations of Cd in 17.24% of soil samples exceeded the limit value established by the Ministry of Ecology and Environment. The ordinary kriging interpolation displayed that the spatial variability of Cd concentrations in soils was mainly influenced by coal mining activities. The transfer capacity of Cd from soils to wheat roots was greater than that from the wheat roots to grains. Multiple linear regression model clarified that soil pH and exchangeable Cd fraction in soils were the critical factors affecting the Cd accumulation in wheat grains. The carcinogenic risk of Cd levels in our studied wheat grains was a concern but still within the acceptable range, while their non-carcinogenic hazard was negligible for adults and children. The calculation results were in accord with the uncertainty analysis conclusion based on Monte Carlo simulation. The study was expected to promote the source management and control strategy of reducing tailing discharge, and providing scientific references for current soil remediation and land degradation prevention.

Layered Ni-rich materials for lithium-ion batteries exhibit high discharge capacities but degraded cyclability at the same time. The limited cycling stability originates from many aspects. One of the critical factors is the intrinsic insulating residual lithium compounds and the rock-salt (NiO) phase on the surface of particles. In this work, LiNi0.8Co0.1Mn0.1O2 material is etched with a trace amount of boric acid and used as a model to demonstrate the influences of weak acid treatment on the surface phase regulations. After the etching process, the pH of the material is reduced from 12.08 to 11.82, along with a lower cation mixing degree and promoting electrochemical performances. Corresponding measurements demonstrate that weak acids such as H3BO3 can also etch the NiO phase on the surface to adjust the surface of the particles to a pure layered structure. This process improves the lithium-ion diffusion and electron transport in the interface between material and electrolyte, consequently leading to better cycling performance and rate capability. This study provides a novel strategy and comprehensive understanding of acid modification and surface phase regulation process of Ni-rich cathode materials for lithium-ion batteries.

High-capacity Li-rich oxide materials have received extensive attention due to their unique anion–cation charge compensation involvement. However, the high operating voltage, poor cycling performance, unsafe oxygen evolution, and voltage decay limit their industrial application. The emergence and development of solid-state batteries offer a great opportunity to solve these issues by replacing flammable and unstable liquid electrolytes with solid electrolytes. Meanwhile, utilization of high-capacity Li-rich oxide cathodes enables to establish high-energy-density solid-state batteries with wide voltage ranges, light weight, and high mechanical properties. This review summarizes the recent progress of Li-rich oxide materials and solid electrolytes, emphasizing their major advantages, interface challenges, and modification approaches in the development of Li-rich solid-state batteries. We also propose possible characterization strategies for effective interfacial observation and analyses. It is hoped that this review should inspire the rational design and development of better solid-state batteries for application in portable devices, electric vehicles, as well as power grids.

The severe “shuttle effect” of dissolved polysulfide intermediates and the poor electronic conductivity of sulfur cathodes cause capacity decay of lithium–sulfur batteries and impede their commercialization. Herein, we synthesized a series of well-designed yolk-shelled Fe3O4@carbon (YS-Fe3O4@C) nanocavities with different proportions of Fe3O4 as efficient sulfur hosts to stabilize polysulfide intermediates. The yolk-shelled nanocavity architectures were prepared through a facile method, which could effectively confine the active materials and achieve high conductivity. The polysulfide intermediate shuttle was successfully suppressed by a physiochemical synergism effect combining the retention of carbon shells and the adsorption of Fe3O4 nanoparticle cores. The highly conductive carbon shell provides efficient pathways for fast electron transportation. Meanwhile, the visible evolution of active materials and a reversible electrochemical reaction are revealed by in situ X-ray diffraction. With the balanced merits of enhanced electrical conductivity of carbon shell and optimal adsorption of Fe3O4 cores, the S/YS-27Fe3O4@C cathode (Fe3O4 accounts for 27 wt% in YS-Fe3O4@C) had the best electrochemical performance, exhibiting a high reversible specific capacity of 731.9 mAh g−1 and long cycle performance at 1 C (capacity fading rate of 0.03% over 200 cycles).

The existence of residual lithium compounds (RLCs) on the surface of layered Ni-rich materials will deteriorate the electrochemical properties and cause safety problem. This work presents an effective surface washing method to remove the RLCs from LiNi0.90Co0.06Mn0.04O2 material surface, via ethyl alcohol solution that contains low concentration of boric acid. It is a low-cost process because the filter liquor can be recycled. The optimal parameters including washing time, boric acid concentration, and solid–liquid ratio were systematically studied. It has been determined by powder pH and Fourier transform infrared spectra results that the amount of RLCs was reduced effectively, and the storage performance was significantly enhanced for the washed samples. The 150th capacity retentions after storing had increased from 68.39% of pristine material to 85.46–94.84% of the washed materials. The performance enhancements should be ascribed to the surface washing process, which removed not only the RLCs, but also the loose primary particles effectively.

2,4-Dichlorophenoxyacetic acid (2,4-D) is a systemic conductive herbicide widely used across the world. With the large-scale and continuous use of 2,4-D, its possible harm to the environment and non-target organisms has attracted increasing attention, and the construction of a stable rapid on-site detection method is particularly important. In order to achieve on-site rapid detection of 2,4-D, we developed a gold nanoparticle immunochromatographic strip method with the visual elimination value was 50 ng/mL, and a quantitative detection limit of 11 ng/mL based on a nanobody. By combing with the color snap, the immunochromatographic strip could quantitatively analyze the amounts of 2,4-D. Meanwhile, a colorimetric card based on the true color of the test strips was developed for the qualitative analysis of 2,4-D on-site. The samples (water, fruits and vegetables) with and without 2,4-D were detected by the immunochromatographic strips, and the results showed the accuracy and reliability. Thus, this assay is a rapid and simple on-site analytical tool to detect and quantify 2,4-D levels in environmental samples, and the analytical results can be obtained in about ten minutes. In addition, the nanobody technology used in this study provides an inexhaustible supply of a relatively stable antibodies that can be archived as a nanobody, plasmid or even its sequence.

The exocyst complex plays multiple roles via tethering secretory or recycling vesicles to the plasma membrane. Previous studies have demonstrated that the exocyst contains eight components, which possibly have some redundant but distinct functions. It is therefore interesting to investigate the biological function of each component. Here, we found that Sec3, one component of exocyst complex, is involved in Drosophila egg chamber development. Loss of sec3 results in egg chamber fusion through the abolishment of cell differentiation. In addition, loss of sec3 increases cell numbers but decreases cell size. These defects phenocopy Notch pathway inactivation. In line with this, loss of sec3 indeed leads to Notch protein accumulation, suggesting that the loss of Sec3 inhibits the delivery of Notch onto the plasma membrane and accumulates inactive Notch in the cytoplasm. Loss of sec3 also leads to the ectopic expression of two Notch pathway target genes, Cut and FasciclinIII, which should normally be downregulated by Notch. Altogether, our study revealed that Sec3 governs egg chamber development through the regulation of Notch, and provides fresh insights into the regulation of oogenesis.

Chronic inflammation promotes the development and progression of various epithelial tumors. Wild-type p53 suppresses inflammation, but it is unclear whether the role of p53 in suppression of inflammation is linked to its tumor suppression function. Here, we established mouse models of myeloid lineage-specific p53 deletion or activation to examine its role in inflammation-related intestinal tumorigenesis. Impaired p53 in the myeloid linage resulted in elevated levels of inflammatory mediators and stimulated adenoma initiation in ApcMin/+ mice. In contrast, mice with mild p53 activation in the myeloid lineage attenuated the inflammatory response and were more resistant to intestinal tumor development and invasion, which were initiated through ApcMin/+ mutation or carcinogen and promoted by colitis. Furthermore, p53 activation also suppressed alternative (M2) macrophage polarization together with c-MYC downregulation. Therefore, as a regulator of macrophage function, p53 is critical to protection against tumorigenesis in a non-cell-autonomous manner.

Atherosclerosis is the pathological basis of cardiovascular disease, whilst endothelial dysfunction (ED) plays a primary role in the occurrence and development of atherosclerosis. Simvastatin has been shown to possess significant anti-atherosclerosis activity. In this study, we evaluated the protective effect of simvastatin on endothelial cells under oxidative stress and elucidated its underlying mechanisms. Simvastatin was found to attenuate H2O2-induced human umbilical vein endothelial cells (HUVECs) dysfunction and inhibit the Wnt/β-catenin pathway; however, when this pathway was activated by lithium chloride, endothelial dysfunction was clearly enhanced. Further investigation revealed that simvastatin did not alter the expression or phosphorylation of LRP6, but reduced intracellular cholesterol deposition and inhibited endoplasmic reticulum (ER) stress. Inducing ER stress with tunicamycin activated the Wnt/β-catenin pathway, whereas reducing ER stress with 4-phenylbutyric acid inhibited it. We hypothesize that simvastatin does not affect transmembrane signal transduction in the Wnt/β-catenin pathway, but inhibits ER stress by reducing intracellular cholesterol accumulation, which blocks intracellular signal transduction in the Wnt/β-catenin pathway and ameliorates endothelial dysfunction.

Solasonine was reported to inhibit tumour cell growth in several different models. The in vivo toxicity of solasonine, the effects of genetic background on its toxicity, and its possible roles in regulating the expression of cyp450 family genes were still unclear and required characterisation. Here, Horn’s assays were performed on male mice from four different strains, and the expression of cyp450 family genes in their livers was examined by RT-PCR and ELISA. Mice treated by intraperitoneal injection with high levels of solasonine showed immediate post-excitatory depression, intraperitoneal tissue adhesion, and dissolving of cells in the liver. Furthermore, these four mouse strains showed different toxicological sensitivity to solasonine. The strains, in decreasing order of LD50 value, rescuing speed of body weight, and more severe pathological symptoms, were KM, ICR, C57BL/6, and BALB/c. Interestingly, more cyp450 genes were downregulated at the mRNA and/or protein level in the livers of male mice from C57BL/6 or BALB/c strains than those from KM or ICR strains. These results suggest that (1) Solasonine has hepatic toxicity and downregulates cyp450 genes expression at transcriptional and/or post-transcriptional levels; (2) Genetic background is an important factor which can affect the in vivo toxicity; (3) Downregulation of cyp450 gene expression in the liver may be a clue to help understand whether or not a given strain is sensitive to solasonine; (4) Influences on the expression of cyp450 genes should be considered when using solasonine alone, or in combination with other drugs.

BackgroundDepressive symptoms are common among patients with lung cancer. We aimed to assess the effects of esketamine on postoperative depressive symptoms after thoracoscopic lung cancer surgery.MethodsIn this randomized, double-blind, placebo-controlled trial, 156 patients undergoing thoracoscopic lung cancer surgery were randomly allocated in a 1:1 ratio to receive intravenous esketamine (intraoperatively and in patient-controlled analgesia until 48 h postoperatively) or normal saline placebo. The primary outcome was the proportion of patients with depressive symptoms at 1 month postoperatively, assessed using the Beck Depression Inventory-II (BDI-II). Secondary outcomes included depressive symptoms at 48 h postoperatively, hospital discharge and 3 months postoperatively, BDI-II scores, anxious symptoms, Beck Anxiety Inventory scores, Quality of Recovery-15 (QoR-15) scores, and 1- and 3-month mortality.Main resultsA total of 151 patients (75 in the esketamine group and 76 in the normal saline group) completed the 1-month follow-up. The esketamine group had a significantly lower incidence of depressive symptoms at 1 month compared to the normal saline group (1.3% vs. 11.8%; risk difference = -10.5, 95%CI = -19.6% to -0.49%; p = 0.018). After excluding patients without lung cancer diagnosis, the incidence of depressive symptoms was also lower in the esketamine group (1.4% vs. 12.2%; risk difference = -10.8, 95%CI = -20.2% to -0.52%; p = 0.018). The secondary outcomes were similar between groups, except that the esketamine group had higher QoR-15 scores at 1 month postoperatively (median difference = 2; 95%CI = 0 to 5; p = 0.048). The independent risk factors for depressive symptoms were hypertension (odds ratio = 6.75, 95%CI = 1.13 to 40.31; p = 0.036) and preoperative anxious symptoms (odds ratio = 23.83, 95%CI = 3.41 to 166.33; p = 0.001).ConclusionPerioperative administration of esketamine reduced the incidence of depressive symptoms at 1 month after thoracoscopic lung cancer surgery. History of hypertension and preoperative anxious symptoms were independent risk factors for depressive symptoms.Clinical trial registration: Chinese Clinical Trial Registry http://www.chictr.org.cn, Identifier (ChiCTR2100046194).