Search

Abstract The Qinghai-Tibet Plateau belongs to the area of extremely fragile environment and sensitive to human activities. In recent years, more and more human interference has been detected in this area. In this study, 128 surface soil samples were collected from the Sabao Chaqu watershed of the Tuotuo river at the source of the Yangtze River on the Qinghai-Tibet Plateau. The soil pollution status and spatial distribution characteristics of Cd, Hg, As, Cu, Pb, Cr, Zn and Ni were evaluated by soil accumulation index, enrichment factor, pollution index and geographical detector. The results showed that the average contents of As, Cd, Pb and Zn in the study area were 1.2–3.64 times higher than soil background values of Tibet, while the contents of Hg, Cr, Cu and Ni were lower than the background values, while the average content of As was higher than the soil pollution risk screening value (GB15618-2018), and the pollution index showed that As was in a low pollution state, while the other 7 heavy metals were in a safe state. There were significant differences in the spatial distribution of 8 heavy metals and there was a significant correlation with soil properties and distance factors. Factor detection showed that natural factors had the strongest explanatory power to the contents of As, Cd, Cr, Cu and Ni, distance from the lake and soil Sc content had the strongest explanatory power to Hg content, and anthropogenic factors had the strongest explanatory power to Pb content. Interaction detection revealed that the q values of the strongest interaction explanatory power for As, Cd, Cr, Cu, Hg, Ni, Pb, and Zn were 2.81, 4.30, 1.26, 2.47, 2.33, 1.59, 6.37, and 5.08 times higher than their strongest factor detection explanatory power, respectively. The interaction between anthropogenic factors and other factors has an important influence on the spatial differentiation of heavy metals in the study area. Risk detection showed that the average contents of As, Cd, Cr, Cu, Hg, Ni, Pb and Zn were the highest in the subregions of MgO, TS, Sc, X6, X13, MgO, TN and X4, respectively. Comprehensive study shows that the spatial differentiation of As, Cd, Cr, Cu, Ni and Zn is mainly affected by natural factors, but there are also some anthropogenic factors, the spatial differentiation of Hg is affected by both natural factors and atmospheric deposition, and the spatial distribution characteristics of Pb are mainly affected by anthropogenic factors.

According to the observation logs, precipitation, temperature monitoring and surrounding investigation, the interference events are classified in detail for the water level observation of the double wells in Ganhai to identify and eliminate interference more accurately and effectively. A preliminary technical solution is proposed for the blockage and man-made cleaning interference that occur most frequently and have the greatest impact on normal observation. The results of hydrogen and oxygen isotope analysis show that the water from two wells is recharged by atmospheric rainfall. Rainfall interference can be identified by collecting rainfall and flow data of river.

Summary: Complement-dependent microglia pruning of excitatory synapses has been widely reported in physiological and pathological conditions, with few reports concerning pruning of inhibitory synapses or direct regulation of synaptic transmission by complement components. Here, we report that loss of CD59, an important endogenous inhibitor of the complement system, leads to compromised spatial memory performance. Furthermore, CD59 deficiency impairs GABAergic synaptic transmission in the hippocampal dentate gyrus (DG). This depends on regulation of GABA release triggered by Ca2+ influx through voltage-gated calcium channels (VGCCs) rather than inhibitory synaptic pruning by microglia. Notably, CD59 colocalizes with inhibitory pre-synaptic terminals and regulates SNARE complex assembly. Together, these results demonstrate that the complement regulator CD59 plays an important role in normal hippocampal function.

Abstract When driving on mountain roads, the drivers bear the dynamic load from the road environment. The sudden change of driving load will produce great safety risks and even lead to traffic accidents. In order to explore the driving risk of two‐lane road in mountainous areas, it is necessary to analyze the change of driving load from a quantitative point of view. Using the road driving experiment, 10 male drivers were selected according to the experimental road conditions, collect the driver's visual and heart rate indicators, analyze the driver's physiological indicators, and study the driver's driving load evolution process on the mountain road. Combined with the classification of road environment, a driving load evaluation model based on catastrophe progression method is constructed. The driving load is divided into four states: low load state, affordable state, chaotic state and high load state. It is found that most sections of mountain roads are in a low load and bearable state. In semi closed and closed environment, the driving load is in a chaotic state, which affects the driving safety. The evaluation model can be used to evaluate the traffic safety of road environment.

Chitosan/MOF composite porous monolith used in water remediation as adsorbent can realize high-efficient removal of pollutant in water and facile recycling from water. However, dissolution of chitosan (without crosslinking) in acidic aqueous solution will cause breakage of composite monolith. Herein, we report a chitosan/UiO-66 monolith prepared by ice-templating method. Specially, a pre-crosslinking treatment (by glutaraldehyde) is employed before the monolith formation, which obviously boosts its stability in aqueous solution. The composite monolith is evaluated by SEM, N2 adsorption, XRD, and batch adsorption tests for Congo Red (CR). The results show that the composite monolith possesses a typical ice-templating structure with hierarchical (mirco- / meso- and macro-) pores. UiO-66 particles are embedded on the surface of chitosan matrix, and the crystal structure of UiO-66 is not changed obviously by the crosslinking and freezing process. The composite monolith exhibits high adsorption efficiency (90% of CR was removed from its aqueous solution in 60 min) and the maximum adsorption capacity of 246.21 mg/g (derived from Langmuir model) can be reached. After adsorption, the monolith is collected by a facile procedure and recovered using ethanol for evaluating its reusability. After 4 cycles, the CR removal efficiency of the composite monolith still remains ~90% of the initial efficiency. This work demonstrates that the simple crosslinking procedure before monolith formation can ensure the intact shape of the chitosan/MOF monolith during adsorption.

The Lower Paleozoic carbonate strata experience multi-stage tectonic activity and post-depositional volcanic activity in the Dongying Depression, Bohai Bay basin. These tectonic and magmatic activities have caused the reservoir to undergo severe diagenesis, resulting in strong reservoir heterogeneity. This study aims to identify the characteristics of dolomite, various reservoir spaces’ characteristics, the origin of different types of dolomite, and the porosity evolution. According to crystal size and morphology, dolomites can be divided into three kinds of matrix dolomites and four kinds of dolomite cements. The petrology and geochemistry of the dolomite suggests that matrix dolomite is formed from seawater. The medium-to-coarse-crystalline dolomite cement (D3) has a higher 87Sr/86Sr ratio (0.7119 to 0.7129) and a higher homogenization temperature (>125 °C), suggesting that the fluid for the precipitation of D3 is a mixed fluid formed by hydrothermal fluid eroding the 87Sr-rich feldspar sandstone. The strikingly negative δ18O values (−23.7 to −25.7‰ VPDB) of saddle dolomite (D4) indicate that D4 precipitated from hydrothermal fluids and the Mg2+ source may be due to dissolution of the host dolomite that formed in the evaporation environment. The reservoir spaces of the target strata in the study area mainly include fractures, dissolution vugs, intercrystalline pores, and moldic pores. Dissolution is the basis for forming high-quality dolomite reservoirs. The faults and fractures provided favorable conditions for dissolution. Hydrothermal fluid and organic acid were the main dissolution fluids for the dolomite reservoir, which were beneficial to the development of secondary pores. In the study area, organic acid dissolution was shown to contribute more than hydrothermal dissolution in the study area.

In this paper, a reduced-order interval observer (R-IO) design technique is developed for continuous-time descriptor linear-parameter-varying systems with unknown-but-bounded uncertainties. First, by introducing an intermediate variable, the R-IO design amounts to estimating the linear functional of the system states. Then, with a parameter-dependent Luenberger-like structure, the R-IO existence condition is eventually formulated into a set of differential-algebraic equations, not involving any linear transformation process. Further, a parametric solution to such an R-IO is derived through solving the equation set, which clearly shows the design degrees of freedom. Finally, the correctness of the proposed results is verified by a numerical system and an electrical circuit system. [ABSTRACT FROM AUTHOR]

All-solid-state Li-metal batteries (ASSLBs) are highly desirable, due to their inherent safety and high energy density; however, the irregular and uncontrolled growth of Li filaments is detrimental to interfacial stability and safety. Herein, we report on the incorporation of piezo-/ferroelectric BaTiO3 (BTO) nanofibers into solid electrolytes and determination of electric-field distribution due to BTO inclusion that effectively regulates the nucleation and growth of Li dendrites. Theoretical simulations predict that the piezoelectric effect of BTO embedded in solid electrolyte reduces the driving force of dendrite growth at high curvatures, while its ferroelectricity reduces the overpotential, which helps to regularize Li deposition and Li+ flux. Polarization reversal of soft solid electrolytes was identified, confirming a regular deposition and morphology alteration of Li. As expected, the ASSLBs operating with LiFePO4/Li and poly(ethylene oxide) (PEO)/garnet solid electrolyte containing 10% BTO additive showed a steady and long cycle life with a reversible capacity of 103.2 mAh g-1 over 500 cycles at 1 C. Furthermore, the comparable cyclability and flexibility of the scalable pouch cells prepared and the successful validation in the sulfide electrolytes, demonstrating its universal and promising application for the integration of Li metal anodes in solid-state batteries. [ABSTRACT FROM AUTHOR]

This article investigates the state interval observation problem for a class of continuous and discrete‐time linear time‐varying (LTV) systems with bounded uncertainties separately. First, by utilizing both the LTV transformation and the solutions to a type of time‐varying fully‐actuated Sylvester equations, a time‐dependent standard interval observer (IO) is established in a parametric form with some design degrees of freedom. Second, a new time‐dependent structure of Luenberger‐type IOs is proposed to relax the limitation of the LTV transformation‐based design method. Further, its sufficient existence conditions are given in virtue of positive system theory. Meanwhile, a parametric design technique of such an IO for uncertain LTV systems is also raised under rank conditions. Third, the obtained results are extended to the discrete‐time systems. Finally, the correctness and benefits of the proposed methods are verified using some numerical examples. [ABSTRACT FROM AUTHOR]

A facile and effective technique to tune the electronic properties of graphene is essential to facilitate the flexibility of graphene-based device performances. Here, the use of hydrazine as a solution-processable and effective n-type dopant for graphene is described. By dropping hydrazine solutions at different concentrations on a graphene surface, the Dirac point of graphene can be remarkably tuned. The transport behavior of graphene can be changed from p-type to n-type accordingly, demonstrating the controllable and adjustable doping effect of the hydrazine solutions. Accompanying the Dirac point shift is an enhanced hysteretic behavior of the graphene conductance, indicating an increasing trap state density induced by the hydrazine adsorbates. The electron-doping of graphene by the hydrazine solutions can be additionally confirmed with graphene/ p-type silicon heterojunctions. The decrease of the junction current after the hydrazine treatment demonstrates an increase of the junction barrier between graphene and silicon, which is essentially due to the electron-doping of graphene and the resultant upshift of the Fermi level. Finally, partially doped graphene is realized and its electrical property is studied to demonstrate the potential of the hydrazine solutions to selectively electron-doping graphene for future electronic applications. [ABSTRACT FROM AUTHOR]