Search

We investigated the possibility of synthesizing Co nanoparticles in CoZr n H/AlO x (OH) y /Al ceramic-metal catalysts and controlling the catalytic properties of these nanoparticles in syngas conversion by changing the Co/Zr ratio. The CoZr nanocomposites were obtained from metal powders by mechanochemical activation in a high-energy mill under an argon atmosphere, followed by treatment with hydrogen at high pressure and room temperature. Ceramic-metal catalysts were prepared by mixing the corresponding CoZr n H powder nanocomposite (30 wt%) with powdered aluminum (70 wt%), hydrothermal treatment of the mixture and subsequent calcination. The materials were characterized with a set of physicochemical methods: powder X-ray diffraction, scanning electron microscopy, 59 Co internal field nuclear magnetic resonance spectroscopy, and temperature programmed reduction. Catalytic studies were performed in a laboratory fixed-bed flow reactor at 2 MPA and 210-270 °C. It is shown that the activity in syngas conversion to C 5+ hydrocarbons and selectivity to methane and C 2 -C 4 hydrocarbons depend on the Co/Zr ratio. Thus, with an increase in the zirconium content in the samples, the interaction of metal cobalt with metal zirconium improves in the process of mechanical activation and subsequent treatment with hydrogen. The destruction of the agglomerates of crystallites of metallic cobalt in the form of β-Co (Co fcc ) occurs as well as their transformation to α-Co (Co hcp ) particles active in the syngas conversion to C 5+ hydrocarbons. This can explain the highest specific yield of C 5+ hydrocarbons on a cermet with the lowest Co/Zr ratio.

Lateral (adsorbate-adsorbate) interactions between adsorbed molecules affect various physical and chemical properties of microporous adsorbents and catalysts, influencing their functional properties. In this work, we studied the hydration of microporous AlPO 4 -11 aluminophosphate, which has an unusually ordered structure upon adsorption of water vapor, and according to 27 Al NMR data, only tetrahedrally or octahedrally coordinated Al sites are present in the AlPO 4 -11. These 27 Al NMR data are consistent with the results of density functional theory (DFT) calculations of hydrated AlPO 4 -11, which revealed the presence of a strong repulsive lateral interaction at the initial stage of adsorption, suppressing the adsorption of water on neighboring (separated by one -O-P-O- bridge) Al crystallographic sites. As a result, of all the different aluminum sites, only half of the Al1 sites adsorb two water molecules and acquire octahedral coordination.

In this work, isolated surface sites of vanadium oxide on the alumina surface were modeled and compared to experimental data obtained with 51 V Solid-State Nuclear Magnetic Resonance (SSNMR) spectroscopy. The geometry of the centers on the (100), (110), and (111) planes of the spinel structure and (010) monoclinic alumina was modeled using density functional theory (DFT); their 51 V NMR parameters were calculated using the Gauge-Including Projector Augmented Wave (GIPAW) method. The comparison of the simulated theoretical spectra with the experimental ones made it possible to find the sites that are likely present on the surface of real catalysts. The minimum energy pathways of propane oxidative dehydrogenation to propene were calculated for the dioxovanadium site in order to estimate its activity.

Investigating the size distributions of Co nanoparticle ensembles is an important problem, which has no straightforward solution. In this work, we use the combination of 59Co internal field nuclear magnetic resonance (59Co IF NMR) and ferromagnetic resonance (FMR) spectroscopies on a metallic Co nanoparticle sample with a narrow Co nanoparticle size distribution due to encapsulation within the inner channels of carbon nanotubes. High-resolution transmission electron microscopy (TEM) images showed that the nanoparticles can be represented as prolate spheroids, with the majority of particles having an aspect ratio between 1 and 2. This observation has increased the accuracy of superparamagnetic blocking size calculations from Néel relaxation model by introducing the actual volume of the ellipsoids taken from the image processing. 59Co IF NMR and FMR experiments conducted under different temperatures allowed us to observe the thermal blocking of superparamagnetic particles in full accordance with the TEM particle volume distribution. This proved that these magnetic resonance techniques can be used jointly for characterization of Co nanoparticles in the bulk of the sample.

Enhanced activity in low-temperature water-gas shift (LT-WGS) reaction of some ceramometal catalysts compared to conventional Cu-Zn-Al oxide catalyst was demonstrated. Porous ceramometals were synthesized from powdered CuAl alloys prepared by mechanical alloying with the addition of either CuAl exp powders produced by current spark explosion of Cu+Al wires or CuZnAl oxide obtained by coprecipitation. Their structural, microstructural, and textural characteristics were examined by means of X-ray diffraction, scanning electron microscopy with energy-dispersive X-ray spectrometry, NMR, and adsorption methods, and catalytic properties were studied in the LT-WGS reaction. CuAlO/CuAl ceramometals were found to have mostly the egg-shell microstructure with the metallic cores (Al x Cu 1- x , Al 2 Cu, and Al 4 Cu 9 ) and the oxide shell containing copper oxides and/or mixed oxides of copper and aluminum and, at same time, CuAlO/CuAl ceramometal with incorporated additives was found to create a more complicated microstructure. A large amount of X-ray amorphous oxides of copper and aluminum is typical for all composites. CuAl ceramometal was shown to be more active than the CuZnAl oxide catalyst in spite of a much lower specific surface area. The CuAl+CuZnAl catalyst consisting of prismatic granules showed a higher activity in comparison with CuZnAl oxide consisting of cylindrical granules. The activity of the composite granulated catalyst referred to its unit weight was more than 6-fold higher as compared to the oxide catalyst, while the activity per the surface area was found to be more than an order of magnitude higher due to much higher specific activity of small fraction and additively much lower diffusion limitation of granules., Competing Interests: The authors declare no competing financial interest., (Copyright © 2020 American Chemical Society.)

A sample with a nominal composition 'NaVPO4F' is prepared by mechanochemically assisted solid-state synthesis using quenching. A detailed study of its crystal and local structure is conducted by means of XRD and FTIR and solid-state 31P NMR spectroscopies in comparison with Na3V2(PO4)2F3. It is shown that the as-prepared 'NaVPO4F' has a multiphase composition, including NaVPO4F as the main phase and Na3V2(PO4)2F3 and Na2.57V4P4O17F as the side products. The crystal structure of NaVPO4F is described in the monoclinic C2/c space group. It is characterized by negligible V3+/V4+ oxidation with the corresponding F-/O2- substitution and the presence of structural disordering. Using the Voronoi-Dirichlet partition (VDP) method, the Na+ and Li+ migration pathways in Tavorite-like NaVPO4F and closely related LiVPO4F (with the triclinic structure, P1[combining macron] S.G.) are analyzed. While the Na+ migration is suppressed in both cases, the Na+/Li+ ion exchange in NaVPO4F with the formation of monoclinic LiVPO4F could occur, but is difficult due to the sodium immobility rather than the instability of the lithium derivatives as was concluded from the DFT calculations.

Biomass pyrolysis by solid acid catalysts is one of many promising technologies for sustainable production of hydrocarbon liquid fuels and value-added chemicals, but these complex chemical transformations are still poorly understood. A series of well-defined model SiO 2 -supported alumina catalysts were synthesized and molecularly characterized, under dehydrated conditions and during biomass pyrolysis, with the aim of establishing fundamental catalyst structure-activity/selectivity relationships. The nature and corresponding acidity of the supported AlO x nanostructures on SiO 2 were determined with 27 Al/ 1 H NMR and IR spectroscopy of chemisorbed CO, and DFT calculations. Operando time-resolved IR-Raman-MS spectroscopy studies revealed the molecular transformations taking place during biomass pyrolysis. The molecular transformations during biomass pyrolysis depended on both the domain size of the AlO x cluster and molecular nature of the biomass feedstock. These new insights allowed the establishment of fundamental structure-activity/selectivity relationships during biomass pyrolysis., (© 2018 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

In this work, we report the results of a detailed structural study of a promising bioceramic material silicocarnotite Ca 5 (PO 4 ) 2 SiO 4 (SC) synthesized from mechanochemically treated nanosized silicon-substituted hydroxyapatite by annealing at 1000°C. This novel synthetic approach represents an attractive and efficient route towards large-scale manufacturing of the silicocarnotite-based bioceramics. A combination of solid-state nuclear magnetic resonance (NMR), powder X-ray crystallography and density function theory (DFT) calculations has been implemented to characterize the phase composition of the prepared composite materials and to gain insight into the crystal structure of silicocarnotite. The phase composition analysis based on the multinuclear solid-state NMR has been found in agreement with X-ray powder diffraction indicating the minority phases of CaO (5-6wt%) and residual silicon-apatite (7-8wt%), while the rest of the material being a fairly crystalline silicocarnotite phase (86-88wt%). A combination of computational (CASTEP) and experimental methods was used to address the anionic site disorder in the silicocarnotite crystal structure. Distorted [OPO 3 ] pyramids have appeared as an important structural motif in the SC crystal structure. The ratio between regular [PO 4 ] and distorted [OPO 3 ] tetrahedra is found between 2:1 and 3:1 based on XRD experiments and CASTEP calculations. The natural abundance 43 Ca magic angle spinning NMR spectra of silicocarnotite are reported for the first time., (Copyright © 2017 Elsevier Inc. All rights reserved.)

Despite the fact that cobalt based catalysts are used at the industrial scale for Fischer-Tropsch synthesis, it is not yet clear which cobalt metallic phase is actually at work under operando conditions and what is its state of dispersion. As it turns out, the different phases of metallic cobalt, fcc and hcp, give rise to distinct ferromagnetic nuclear magnetic resonance. Furthermore, within one Co metal particle, the occurrence of several ferromagnetic domains of limited sizes can be evidenced by the specific resonance of Co in multi-domain particles. Consequently, by ferromagnetic NMR, one can follow quantitatively the sintering and phase transitions of dispersed Co metal particles in supported catalysts under near operando conditions. The minimal size probed by ferromagnetic Co NMR is not precisely known but is considered to be in the order of 10 nm for supported Co particles at room temperature and increases to about 35 nm at 850 K. Here, in Co metal Fischer-Tropsch synthesis catalysts supported on β-SiC, the resonances of the fcc multi-domain, fcc single-domain and hcp Co were clearly distinguished. A careful rationalization of their frequency and width dependence on temperature allowed a quantitative analysis of the spectra in the temperature range of interest, thus reflecting the state of the catalysts under near operando conditions that is without the uncertainty associated with prior quenching. The allotropic transition temperature was found to start at 600-650 K, which is about 50 K below the bulk transition temperature. The phase transition was fully reversible and a significant part of the hcp phase was found to be stable up to 850 K. This anomalous behavior that was observed without quenching might prove to be crucial to understand and model active species not only in catalysts but also in battery materials.

Ab initio DFT calculations of (93)Nb NMR parameters using the NMR-CASTEP code were performed for a series of over fifty individual niobates, and a good agreement has been found with experimental NMR parameters. New experimental and calculated (93)Nb NMR data were obtained for several compounds, AlNbO4, VNb9O25, K8Nb6O19 and Cs3NbO8, which are of particular interest for catalysis. Several interesting trends have been identified between (93)Nb NMR parameters and the specifics of niobium site environments in niobates. These trends may serve as useful guidelines in interpreting (93)Nb NMR spectra of complex niobium oxide systems, including amorphous samples and niobium-based multicomponent heterogeneous catalysts. Potential applications of (93)Nb NMR to study solid polyoxoniobates are discussed.

Silica fiberglass textiles are emerging as uniquely suited supports in catalysis, which offer unprecedented flexibility in designing advanced catalytic systems for chemical and auto industries. During manufacturing fiberglass materials are often modified with additives of various nature to improve glass properties. Glass network formers, such as zirconia and alumina, are known to provide the glass fibers with higher strength and to slow down undesirable devitrification processes. In this work multinuclear (1)H, (23)Na, (29)Si, and (91)Zr NMR spectroscopy was used to characterize the effect of zirconia on the molecular-level fiberglass structure. (29)Si NMR results help in understanding why zirconia-modified fiberglass is more stable towards devitrification comparing with pure silica glass. Internal void spaces formed in zirconia-silica glass fibers after acidic leaching correlate with sodium and water distributions in the starting bulk glass as probed by (23)Na and (1)H NMR. These voids spaces are important for stabilization of catalytically active species in the supported catalysts. Potentials of high-field (91)Zr NMR spectroscopy to study zirconia-containing glasses and similarly disordered systems are illustrated., (Copyright © 2011 Elsevier Inc. All rights reserved.)

(129)Xe NMR has been used to study a series of homologous activated carbons obtained from a KOH-activated pitch-based carbon molecular sieve modified by air oxidation/pyrolysis cycles. A clear correlation between the pore size of microporous carbons and the (129)Xe NMR of adsorbed xenon is proposed for the first time. The virial coefficient delta(Xe)(-)(Xe) arising from binary xenon collisions varied linearly with the micropore size and appeared to be a better probe of the microporosity than the chemical shift extrapolated to zero pressure. This correlation was explained by the fact that the xenon collision frequency increases with increasing micropore size. The chemical shift has been shown to vary very little with temperature (less than 9 ppm) for xenon trapped inside narrow and wide micropores. This is indicative of a smooth xenon-surface interaction potential.

129Xe NMR spectroscopy has been used to study the adsorption of Xe on multi-wall carbon nanotubes (MWCNT). The results obtained have shown the 129Xe NMR ability to probe the intercrystalline (aggregate) and the inner porosity of CNT. In particular, the effects on porosity of tubes openings by hydrogen exposure and of ball milling were examined. Dramatic changes observed in the 129Xe NMR spectra after moderate ball milling of MWCNTs were attributed to the destruction of the initial intercrystalline pore structure and to the Xe access inside the nanotubes. To examine the exchange dynamics the mixture of as-made and milled MWCNTs was studied with one- and two-dimensional (1D and 2D) 129Xe NMR. The exchange between the interior of milled nanotubes and the aggregate pores of as-made MWCNTs was fast on the NMR acquisition time scale. The Xenon exchange between the interior of the as-made MWCNTs and the large aggregate pores occurred on a longer time scale of 10 ms, as was established by 2D 129Xe NMR exchange spectroscopy. Variable temperature 129Xe NMR data were also discussed and analyzed in terms of the fast exchange approximation.

93Nb solid-state NMR spectra of a series of inorganic niobates with Nb in different oxygen coordination environments were measured. For all studied compounds the chemical shielding and quadrupole tensor parameters were determined using conventional and ultrahigh field NMR facilities, ultrahigh speed MAS, DQ STMAS, solid-echo and computer modeling. It has been demonstrated that the 93Nb isotropic chemical shift is sensitive to the coordination number of Nb sites. For the first time the 93Nb NMR chemical shift scale for NbOx polyhedra in solid materials has been proposed: for four-coordinated Nb sites, the isotropic shifts occur from -650 to -950 ppm; five-coordinated Nb sites have the isotropic shifts in the range of -900 to -980 ppm; for six-coordinated Nb sites the isotropic shifts vary from -900 to -1360 ppm; the shifts from -1200 to -1600 ppm are typical for seven-coordinated Nb sites; for eight-coordinated Nb sites the shifts are higher than -1400 ppm. The possible correlation between the value of the isotropic chemical shift and the ionic character of the NbOx-MOy polyhedra association has been suggested. The magnitude of the 93Nb quadrupole coupling constant depends on the local symmetry of Nb sites and may vary from hundreds of kHz to hundreds of MHz.

In this study, 95Mo quadrupole couplings in various molydbates were measured easily and accurately with magic angle spinning (MAS) NMR under a directing field of 19.6 T. The resonance frequency of 54 MHz was sufficiently high to remove acoustic ringing artifacts, and the spectra could be analyzed in the usual terms of chemical shift and quadrupolar line shapes. For monomolybdates and molybdite, the quadrupole coupling dominated the NMR response, and the quadrupole parameters could be measured with better accuracy than in previous lower field studies. Moreover, despite the low symmetry of the molybdenum coordination, the usefulness of such measurements to probe molybdenum environments was established by ab initio density functional theory (DFT) calculations of the electric field gradient from known structures. The experimental NMR data correlated perfectly with the refined structures. In isopolymolybdates, the resonances were shapeless and DFT calculations were impossible because of the large and low symmetry unit cells. Nevertheless, empirical but clear NMR signatures were obtained from the spinning sidebands analysis or the MQMAS spectra. This was possible for the first time thanks to the improved baseline and sensitivity at high fields. With the generalization of NMR spectrometers operating above 17 T, it was predicted that 95Mo MAS NMR could evolve as a routine characterization tool for ill-defined structures such as supported molybdates in catalysis.

1H magic-angle spinning nuclear magnetic resonance (MAS NMR) spectra of TiO chi/SiO2 catalysts suggest the interaction of surface TiO chi species with Si-OH groups of the silica. Simultaneously, Ti-OH groups from surface titania species appear. The distribution of TiO chi species over SiO2 is non-uniform, since a considerable part of surface OH groups remains unreacted with supported titania. Supported vanadia species interact both with Si-OH and Ti-OH groups. 51V NMR spectra suggest the interaction of vanadia with supported titania species and show the non-uniform distribution of titania over the SiO2 surface. Deposition of titania as well as vanadia produces strong electron-accepting (Lewis) sites which interact with the terminal N atom of adsorbed N2O molecules, resulting in a downfield shift of the resonance in 15N NMR spectra. The acid strength of electron-accepting sites is similar in both cases. Only about 10% of the total amount of supported titania and vanadia create Lewis sites.

Amorphous aluminum orthophosphate is used as a carrier for preparing a series of V2O5-AlPO4 catalysts with varying vanadia content. The catalysts were characterized by solid-state 51V and 1H magic-angle spinning nuclear magnetic resonance (MAS NMR), electron spin resonance (ESR) and X-ray diffraction (XRD). The XRD patterns of the catalysts remained amorphous at all loadings studied. 51V Solid-state NMR spectra revealed the presence of V2O5 microcrystallites at higher vanadia loadings. The 1H MAS NMR spectra of the catalysts showed a maximum consumption of support hydroxyl groups at 6 wt.-% V2O5 indicating the completion of a monolayer at this composition.