Search

We present a loss-reduced photonic liquid-crystal fiber (PLCF) using the noncontact photoalignment method. The photoexcited and adsorbed azo dye on the capillary surface of a PLCF induces uniform and highly ordered orientation of the liquid crystal (LC). The anchoring force of the photoalignment effect is combined with that generated by surface boundary conditions of the photonic crystal fiber (PCF). Transmission loss resulting from LC scattering can be reduced from -2.8 to -1.3 db/cm within 10 min. This photoinduced alignment yields a permanent boundary for the LC in the PCF that reduces scattering loss and can be further modulated by electrical fields. The electrical tunable effect and fast dynamic response of the photoaligned PLCF are also presented. This low-loss PLCF can be applied conveniently in various PLCF devices. OCIS codes: 160.3710, 060.5295.

The formation of microscale single- and double-emulsion droplets with various sizes is crucial for a variety of industrial applications. In this paper, we report a new microfluidic device which can actively fine-tune the size of single- and double-emulsion droplets in liquids by utilizing controllable moving-wall structures. Moreover, various sizes of external and internal droplets for double emulsions are also successfully formed by using this device. Three pneumatic side chambers are placed at a T-junction and flow-focusing channels to construct the controllable moving-wall structures. When compressed air is applied to the pneumatic side chambers, the controllable moving-wall structures are activated, thus physically changing the width of the microchannels. The size of the internal droplets at the intersection of the T-junction channel is then fine-tuned due to the increase in the shear force. Then, the internal droplets are focused into a narrow stream hydrodynamically and finally chopped into double-emulsion droplets using another pair of moving-wall structures downstream. For single emulsions, oil-in-water droplets can be actively fine-tuned from 50.07 to 21.80 [micro]m under applied air pressures from 10 to 25 psi with a variation of less than 3.53%. For a water-in-oil single emulsion, droplets range from 50.32 to 14.76 [micro]m with a variation of less than 4.62% under the same applied air pressures. For double emulsions, the sizes of the external and internal droplets can be fine-tuned with external/ internal droplet diameter ratios ranging from 1.69 to 2.75. The development of this microfluidic device is promising for a variety of applications in the pharmaceutical, cosmetics, and food industries. [2007-0230] Index Terms--Double emulsion, flow focusing, microdroplet, microelectromechanical systems (MEMS), microfluidics, moving wall, T-junction.