Search

Fabrication of epitaxial FeSexTe1-x thin films using pulsed laser deposition (PLD) enables improving their superconducting transition temperature (T c) by more than ~40% than their bulk T c. Intriguingly, T c enhancement in FeSexTe1-x thin films has been observed on various substrates and with different Se content, x. To date, various mechanisms for T c enhancement have been reported, but they remain controversial in universally explaining the T c improvement in the FeSexTe1-x films. In this report, we demonstrate that the controversies over the mechanism of T c enhancement are due to the abnormal changes in the chalcogen ratio (Se:Te) during the film growth and that the previously reported T c enhancement in FeSe0.5Te0.5 thin films is caused by a remarkable increase of Se content. Although our FeSexTe1-x thin films were fabricated via PLD using a Fe0.94Se0.45Te0.55 target, the precisely measured composition indicates a Se-rich FeSexTe1-x (0.6

Fabrication of epitaxial FeSexTe1-x thin films using pulsed laser deposition (PLD) enables improving their superconducting transition temperature (T c) by more than ~40% than their bulk T c. Intriguingly, T c enhancement in FeSexTe1-x thin films has been observed on various substrates and with different Se content, x. To date, various mechanisms for T c enhancement have been reported, but they remain controversial in universally explaining the T c improvement in the FeSexTe1-x films. In this report, we demonstrate that the controversies over the mechanism of T c enhancement are due to the abnormal changes in the chalcogen ratio (Se:Te) during the film growth and that the previously reported T c enhancement in FeSe0.5Te0.5 thin films is caused by a remarkable increase of Se content. Although our FeSexTe1-x thin films were fabricated via PLD using a Fe0.94Se0.45Te0.55 target, the precisely measured composition indicates a Se-rich FeSexTe1-x (0.6

Thermal metamaterials have emerged as one of the latest research topics in applied science due to breakthrough advantages in modifying conductive heat flux. An acoustic Bragg reflector (ABR), composed of alternating arrays of two materials with contrasting acoustic impedances, is anticipated to coherently manipulate the transport properties of thermally important phonon branches by attaining interface roughness close to the monoatomic scale. However, there is a lack of research on how a narrow portion of the phononic band of a particular ABR can be extended to cover the entire thermal spectrum. Here, we report a modeling study of thermal transport using ABR, representatively based on GaAs/AlAs, GaN/AlN, or HfO 2 / SiO 2 superlattices. Our calculations show that the anisotropy of thermal conductivity in HfO 2 / SiO 2 can be significantly improved by tandemizing four different ABR layers, thus approaching the theoretically anticipated values based on monolayered materials. This work demonstrates how the tandem ABR can expand forbidden phononic bands beyond that occupied by a single ABR and proposes a practical strategy for realizing spectrally functionalized thermal properties from compound semiconductor materials that can be directly integrated into the existing device fabrication processes. [ABSTRACT FROM AUTHOR]

We demonstrate that the thermal boundary conductivity (TBC) between graphene and GaN-based light-emitting diodes (LEDs) can be manipulated through thermal annealing, which is verified by measuring the acoustic phonons after reflection at the interface. Thermal annealing affects the interfacial morphology as evaluated by both the Raman spectra and the spatial profile of the graphene wrinkles in atomic force microscopy. By tracing the phase of ultrafast acoustic oscillations on the basis of the pump-probe scheme, we extract the phonon reflection coefficient at the interface as a function of annealing temperatures up to 400 ° C. Specifically, the phase shift of transient phononic oscillations at the graphene/LED interface conveys the photoelastic response during the phonon transfer process and can be used for extracting the interfacial coupling rate, which is strongly enhanced around ≈ 200 ° C. By incorporating the heat capacity and the interfacial coupling constants into TBC, along with analytical modeling based on the phonon reflection coefficients, we show that the TBC increases with the minimized surface roughness of graphene side at 200 ° C. This new comprehensive TBC extraction scheme could spark further discussion on improving the heat dissipation of LEDs. [ABSTRACT FROM AUTHOR]

The experiential learning theory is one of the best-known learning theories in education and has been explored and developed for decades through various studies in higher education. This learning method is expected to provide a significantly better learning environment for engineering subjects, such as construction techniques and design methods and alternatives, which may occur in most of the construction engineering disciplines. Nevertheless, the theory has hardly been used in construction engineering courses. In this study, the authors perform an in-depth review of the learning theory and present a case study, formwork design example, wherein the theory can be explicitly applied in construction engineering education. Research findings reveal students' responses to the learning theory and lessons learned. Correlation analysis is conducted to explore how students' performance in learning can be influenced by this learning theory. DOI: 10.1061/(ASCE)1052-3928(2008)134:2(158) CE Database subject headings: Engineering education; Construction management; Engineering education.