Search

KTaO3 has recently attracted attention as a model system to study the interplay of quantum paraelectricity, spin-orbit coupling, and superconductivity. However, the high and low vapor pressures of potassium and tantalum present processing challenges to creating interfaces clean enough to reveal the intrinsic quantum properties. Here, we report superconducting heterostructures based on electronic-grade epitaxial (111) KTaO3 thin films. Electrical and structural characterizations reveal that two-dimensional electron gas at the heterointerface between amorphous LaAlO3 and KTaO3 thin film exhibits significantly higher electron mobility, superconducting transition temperature and critical current density than those in bulk single crystal KTaO3-based heterostructures owing to cleaner interface in KTaO3 thin films. Our hybrid approach may enable epitaxial growth of other alkali metal-based oxides that lie beyond the capabilities of conventional methods.

We describe a method to control the insulator-metal transition at the LaAlO3/SrTiO3 interface using ultra-low-voltage electron beam lithography (ULV-EBL). Compared with previous reports that utilize conductive atomic-force-microscope lithography (c-AFM), this approach can provide comparable resolution (~10 nm) at write speeds (10 mm/s) that are up to 10,000x faster than c-AFM. The writing technique is non-destructive and the conductive state is reversible via prolonged exposure to air. Transport properties of representative devices are measured at milli-Kelvin temperatures, where superconducting behavior is observed. We also demonstrate the ability to create conducting devices on graphene/LaAlO3/SrTiO3 heterostructures. The underlying mechanism is believed to be closely related to the same mechanism regulating c-AFM-based methods., Comment: 4 figures

The quest to understand, design, and synthesize new forms of quantum matter guides much of contemporary research in condensed matter physics. One-dimensional (1D) electronic systems form the basis for some of the most interesting and exotic phases of quantum matter. The variety of experimentally-accessible ballistic 1D electronic systems is highly restricted, and furthermore these systems typically have few tuning parameters other than electric and magnetic fields. However, electron waveguides formed from two-dimensional (2D) LaAlO$_3$/SrTiO$_3$ heterointerfaces exhibit remarkable 1D properties, including ballistic multi-mode transport and strong attractive electron-electron interaction, but these systems conspicuously lack strong or tunable spin-orbit interactions. Here we describe a new class of quasi-1D nanostructures, based on LaAlO$_3$/SrTiO$_3$ electron waveguides, in which a sinusoidal transverse spatial modulation is imposed. Nanowires created with this "serpentine" modulation display unique dispersive features in the subband spectra, namely (1) a significant shift ($\sim$ 7 tesla) in the spin-dependent subband minima, and (2) fractional conductance plateaus, some of which are continuously tunable with a magnetic field. The first property can be understood as an engineered spin-orbit interaction associated with the periodic acceleration of electrons as they undulate through the nanowire (ballistically), while the second property signifies the presence of enhanced electron-electron scattering in this system due to the imposed periodic structure. The ability to engineer these interactions in quantum wires contributes to the tool set of a 1D solid-state quantum simulation platform.

The paradigm of electrons interacting with a periodic lattice potential is central to solid-state physics. Semiconductor heterostructures and ultracold neutral atomic lattices capture many of the essential properties of 1D electronic systems. However, fully one-dimensional superlattices are highly challenging to fabricate in the solid state due to the inherently small length scales involved. Conductive atomic-force microscope (c-AFM) lithography has recently been demonstrated to create ballistic few-mode electron waveguides with highly quantized conductance and strongly attractive electron-electron interactions. Here we show that artificial Kronig-Penney-like superlattice potentials can be imposed on such waveguides, introducing a new superlattice spacing that can be made comparable to the mean separation between electrons. The imposed superlattice potential "fractures" the electronic subbands into a manifold of new subbands with magnetically-tunable fractional conductance (in units of $e^2/h$). The lowest $G=2e^2/h$ plateau, associated with ballistic transport of spin-singlet electron pairs, is stable against de-pairing up to the highest magnetic fields explored ($|B|=16$ T). A 1D model of the system suggests that an engineered spin-orbit interaction in the superlattice contributes to the enhanced pairing observed in the devices. These findings represent an important advance in the ability to design new families of quantum materials with emergent properties, and mark a milestone in the development of a solid-state 1D quantum simulation platform.

We report frictional drag measurements between two superconducting LaAlO$_3$/SrTiO$_3$ nanowires. In these experiments, current passing through one nanowire induces a voltage across a nearby electrically isolated nanowire. The frictional drag signal contains both symmetric and antisymmetric components. The antisymmetric component arises from the rectification of quantum shot noise in the drive nanowire by the broken symmetry in the drag nanowire. The symmetric component in the drag resistance is ascribed to rectification of thermal noise in the drive nanowire during superconducting-normal transition. The suppression of the symmetric component is observed when a normal nanowire is used as either a drag or drive nanowire with the other nanowire superconducting. The absence of symmetric drag resistance between a normal drag nanowire and a superconducting drive nanowire suggests a higher electron-hole asymmetry in the superconducting LaAlO$_3$/SrTiO$_3$ nanowire arising from the 1D nature of superconductivity at LaAlO$_3$/SrTiO$_3$ interface., Comment: 12 pages, 5 figures

Pristine, undoped graphene has a constant absorption of 2.3 % across the visible to near-infrared (VIS-NIR) region of the electromagnetic spectrum. Under certain conditions, such as nanostructuring and intense gating, graphene can interact more robustly with VIS-NIR light and exhibit a large nonlinear optical response. Here, we explore the optical properties of graphene/LaAlO$_3$/SrTiO$_3$ nanostructures, where nanojunctions formed at the LaAlO$_3$/SrTiO$_3$ interface enable large (~10$^8$ V/m) electric fields to be applied to graphene over a scale of ~10 nm. Upon illumination with ultrafast VIS-NIR light, graphene/LaAlO$_3$/SrTiO$_3$ nanostructures produce broadband THz emission as well as a sum-frequency generated (SFG) response. Strong spectrally sharp, gate-tunable extinction features (>99.99%) are observed in both the VIS-NIR and SFG regions alongside significant intensification of the nonlinear response. The observed gate-tunable strong graphene-light interaction and nonlinear optical response are of fundamental interest and open the way for future exploitation in graphene-based optical devices., Comment: 20 pages, 7 figures, supplementary information included

We report Aharonov-Bohm (AB)-type quantum interference in simply-connected devices created at the LaAlO$_3$/SrTiO$_3$ interface using conductive-atomic force microscope (c-AFM) lithography. The oscillations are multi-periodic functions of magnetic field strength, and they exhibit a substantial magnetic hysteresis with frequencies that depends on the magnetic sweep direction. The oscillation amplitude for the lowest two frequencies approaches $e^2/h$, consistent with the theoretical maximum for the AB effect, and harmonics up to third order are observable. Broadband quasiperiodic behavior is reported in a fraction of simply-connected electron waveguide devices that exhibit magnetic asymmetries. Curiously, nanoscale ring devices that are multiply-connected lack signatures of AB quantum interference. The interference phenomena are associated with an inhomogeneous magnetic landscape within the LaAlO$_3$/SrTiO$_3$ nanostructures., Comment: 5 pages, 3 figures, Supplementary materials

In the world of big data, many people find it difficult to access the information they need quickly and accurately. In order to overcome this, research on the system that recommends information accurately to users is continuously conducted. Collaborative Filtering is one of the famous algorithms among the most used in the industry. However, collaborative filtering is difficult to use in online systems because user recommendation is highly volatile in recommendation quality and requires computation using large matrices. To overcome this problem, this paper proposes a method similar to database queries and a clustering method (Contents Navigator) originating from a complex network.

The ability to create and investigate composite fermionic phases opens new avenues for the investigation of strongly correlated quantum matter. We report the experimental observation of a series of quantized conductance steps within strongly interacting electron waveguides formed at the LaAlO$_3$/SrTiO$_3$ interface. The waveguide conductance follows a characteristic sequence within Pascal's triangle: $(1, 3, 6, 10, 15, ...)\cdot e^2/h$, where $e$ is the electron charge and $h$ is the Planck constant. The robustness of these steps with respect to magnetic field and gate voltage indicate the formation of a new family of degenerate quantum liquids formed from bound states of $n = 2, 3, 4, ...$ electrons. These experiments could provide solid-state analogues for a wide range of composite fermionic phases ranging from neutron stars to solid-state materials to quark-gluon plasmas.

The properties of graphene depend sensitively on doping with respect to the charge-neutrality point (CNP). Tuning the CNP usually requires electrical gating or chemical doping. Here, we describe a technique to reversibly control the CNP in graphene with nanoscale precision, utilizing LaAlO$_3$/SrTiO$_3$ (LAO/STO) heterostructures and conductive atomic force microscope (c-AFM) lithography. The local electron density and resulting conductivity of the LAO/STO interface can be patterned with a conductive AFM tip, and placed within two nanometers of an active graphene device. The proximal LAO/STO nanostructures shift the position of graphene CNP by ~ $10^{12}$ cm$^{-2}$, and are also gateable. Here we use this effect to create reconfigurable edge states in graphene, which are probed using the quantum Hall effect. Quantized resistance plateaus at $h/e^2$ and $h/3e^2$ are observed in a split Hall device, demonstrating edge transport along the c-AFM written edge that depends on the polarity of both the magnetic field and direction of currents. This technique can be readily extended to other device geometries., Comment: 12 pages