Search

This paper adopts a two-stage sample robust optimization (SRO) model to address the wind power penetrated unit commitment optimal energy flow (UC-OEF) problem for IEGSs. The two-stage SRO model can be approximately transformed into a computationally efficient form. Specifically, we employ linear decision rules to simplify the proposed UC-OEF model. Moreover, we further enhance the tractability of the simplified model by exploring its structural features and, accordingly, develop a solution method., Comment: 10 pages

When performing the resilience enhancement for distribution networks, there are two obstacles to reliably model the uncertain contingencies: 1) decision-dependent uncertainty (DDU) due to various line hardening decisions, and 2) distributional ambiguity due to limited outage information during extreme weather events (EWEs). To address these two challenges, this paper develops scenario-wise decision-dependent ambiguity sets (SWDD-ASs), where the DDU and distributional ambiguity inherent in EWE-induced contingencies are simultaneously captured for each possible EWE scenario. Then, a two-stage trilevel decision-dependent distributionally robust resilient enhancement (DD-DRRE) model is formulated, whose outputs include the optimal line hardening, distributed generation (DG) allocation, and proactive network reconfiguration strategy under the worst-case distributions in SWDD-ASs. Subsequently, the DD-DRRE model is equivalently recast to a mixed-integer linear programming (MILP)-based master problem and multiple scenario-wise subproblems, facilitating the adoption of a customized column-and-constraint generation (C&CG) algorithm. Finally, case studies demonstrate a remarkable improvement in the out-of-sample performance of our model, compared to its prevailing stochastic and robust counterparts. Moreover, the potential values of incorporating the ambiguity and distributional information are quantitatively estimated, providing a useful reference for planners with different budgets and risk-aversion levels.

Distribution system (DS) restoration after natural disasters often faces the challenge of communication failures to feeder automation (FA) facilities, resulting in prolonged load pick-up process. This letter discusses the utilization of drone small cells for wireless communication recovery of FA, and proposes an integrated DS restoration strategy with communication recovery. Demonstrative case studies are conducted to validate the proposed model, and its advantages are illustrated by comparing to benchmark strategies.

Commercial building heating, ventilation, and air conditioning (HVAC) systems have been studied for providing ancillary services to power grids via demand response (DR). One critical issue is to estimate the counterfactual baseline power consumption that would have prevailed without DR. Baseline methods have been developed based on whole building electric load profiles. New methods are necessary to estimate the baseline power consumption of HVAC sub-components (e.g., supply and return fans), which have different characteristics compared to that of the whole building. Tensor completion can estimate the unobserved entries of multi-dimensional tensors describing complex data sets. It exploits high-dimensional data to capture granular insights into the problem. This paper proposes to use it for baselining HVAC fan power, by utilizing its capability of capturing dominant fan power patterns. The tensor completion method is evaluated using HVAC fan power data from several buildings at the University of Michigan, and compared with several existing methods. The tensor completion method generally outperforms the benchmarks.

The increasing extreme weather events poses unprecedented challenges on power system operation because of their uncertain and sequential impacts on power systems. This paper proposes the concept of an extended steady-state security region (ESSR), and resilience enhancement for transmission systems based on ESSR in consideration of uncertain varying topology changes caused by the extreme weather events is implemented. ESSR is a ploytope describing a region, in which the operating points are within the operating constraints. In consideration of uncertain varying topology changes with ESSR, the resilience enhancement problem is built as a bilevel programming optimization model, in which the system operators deploy the optimal strategy against the most threatening scenario caused by the extreme weather events. To avoid the curse of dimensionality with regard to system topologies for a large scale system, the Monte Carlo method is used to generate uncertain system topologies, and a recursive McCormick envelope-based approach is proposed to connect generated system topologies to optimization variables. Karush Kuhn Tucker (KKT) conditions are used to transform the suboptimization model in the second level into a group of equivalent constraints in the first level. A simple test system and IEEE 118-bus system are used to validate the proposed.

Network reconfiguration is an effective strategy for different purposes of distribution systems (DSs), e.g., resilience enhancement. In particular, DS automation, distributed generation integration and microgrid (MG) technology development, etc., are empowering much more flexible reconfiguration and operation of the system, e.g., DSs or MGs with flexible boundaries. However, the formulation of DS reconfiguration-related optimization problems to include those new flexibilities is non-trivial, especially for the issue of topology, which has to be radial. That is, existing methods of formulating radiality constraints can cause underutilization of DS flexibilities. Thus, this work proposes a new method for radiality constraints formulation fully enabling the topological and some other related flexibilities of DSs, so that the reconfiguration-related optimization problems can have extended feasibility and enhanced optimality. Graph-theoretic supports are provided to certify its theoretical validity. As integer variables are involved, we also analyze the tightness and compactness issues. The proposed radiality constraints are specifically applied to post-disaster MG formation, which is involved in many DS resilience-oriented service restoration and/or infrastructure recovery problems. The resulting new MG formation model, which allows more flexible merge and/or separation of sub-grids, etc., establishes superiority over the models in the literature. Case studies are conducted on two test systems.

Because failures in distribution systems caused by extreme weather events directly result in consumers' outages, this paper proposes a state-based decision-making model with the objective of mitigating loss of load to improve the distribution system resilience throughout the unfolding events. The sequentially uncertain system states, e.g., feeder line on/off states, driven by the unfolding events are modeled as Markov states, and the probabilities from one Markov state to another Markov state throughout the unfolding events are determined by the component failure caused by the unfolding events. A recursive optimization model based on Markov decision processes (MDP) is developed to make state-based actions, i.e., system reconfiguration, at each decision time. To overcome the curse of dimensionality caused by enormous states and actions, an approximate dynamic programming (ADP) approach based on post-decision states and iteration is used to solve the proposed MDP-based model. IEEE 33-bus system and IEEE 123-bus system are used to validate the proposed model.

Repair crews (RCs) and mobile power sources (MPSs) are critical resources for distribution system (DS) outage management after a natural disaster. However, their logistics is not well investigated. We propose a resilient scheme for disaster recovery logistics to co-optimize DS restoration with dispatch of RCs and MPSs. A novel co-optimization model is formulated to route RCs and MPSs in the transportation network, schedule them in the DS, and reconfigure the DS for microgrid formation coordinately, etc. The model incorporates different timescales of DS restoration and RC/MPS dispatch, the coupling of transportation and power networks, etc. To ensure radiality of the DS with variable physical structure and MPS allocation, we also model topology constraints based on the concept of spanning forest. The model is convexified equivalently and linearized into a mixed-integer linear programming. To reduce its computation time, preprocessing methods are proposed to pre-assign a minimal set of repair tasks to depots and reduce the number of candidate nodes for MPS connection. Resilient recovery strategies thus are generated to enhance service restoration, especially by dynamic formation of microgrids that are powered by MPSs and topologized by repair actions of RCs and network reconfiguration of the DS. Case studies demonstrate the proposed methodology.

This paper addresses two vital issues which are barely discussed in the literature on robust unit commitment (RUC): 1) how much the potential operational loss could be if the realization of uncertainty is beyond the prescribed uncertainty set; 2) how large the prescribed uncertainty set should be when it is used for RUC decision making. In this regard, a robust risk-constrained unit commitment (RRUC) formulation is proposed to cope with large-scale volatile and uncertain wind generation. Differing from existing RUC formulations, the wind generation uncertainty set in RRUC is adjustable via choosing diverse levels of operational risk. By optimizing the uncertainty set, RRUC can allocate operational flexibility of power systems over spatial and temporal domains optimally, reducing operational cost in a risk-constrained manner. Moreover, since impact of wind generation realization out of the prescribed uncertainty set on operational risk is taken into account, RRUC outperforms RUC in the case of rare events. Three algorithms based on column and constraint generation (C&CG) are derived to solve the RRUC. As the proposed algorithms are quite general, they can also apply to other RUC models to improve their computational efficiency. Simulations on a modified IEEE 118-bus system demonstrate the effectiveness and efficiency of the proposed methodology, Comment: arXiv admin note: text overlap with arXiv:1510.03308