Search

Three-dimensional cultures of follicles on ECM-based scaffolds can be an approach for women who become infertile after cancer treatments. Human amniotic membrane (HAM) is extensively employed in tissue engineering because of its unique properties. We cultured mouse pre-antral follicles in a hydrogel derived from decellularized amniotic membrane (DAM) combined with alginate (ALG) to improve ovarian follicle culture. HAM was decellularized. Quantitative (nuclear contents, collagen, glycosaminoglycan [GAG]) and qualitative (DAPI, H&E, Masson’s trichrome, Alcian blue, scanning electron microscopy assessments were performed. Then, we created an amniotic membrane-based hydrogel (AMBH) and conducted AMBH characterization assays (rheology, MTS, degradation rate). Isolated mouse pre-antral follicles were cultured in 15 mg/mL AMBH (AMBH15), 30 mg/mL AMBH (AMBH30), or 45 mg/mL AMBH (AMBH45). ALG hydrogel was the control group. Follicular diameters, estradiol hormone secretion rate, follicular morphology, and the follicle antral and degeneration rate were examined. Quantitative and qualitative assays indicated successful decellularization. AMBH characterization assays showed that the ALG hydrogel had more appropriate gelation and slower degradation than AMBH. There was a statistically higher antral follicle formation rate in the AMBH45 group ( p < .05) compared to the AMBH30 and AMBH15 groups and less ( p < .05) degenerated follicles. There was no significant difference with the ALG group. Diameter and estradiol hormone secretion in the AMBH45 group were not significantly higher than the ALG group. Although decellularization was confirmed and the viscoelastic parameters of AMBH support follicle culture, there was no significant effect on ovarian follicle maturation compared to the ALG control group.

Microfluidic systems have been extensively studied in recent years as potential alternatives for problematic conventional methods of sperm selection. However, despite the widespread use of simple straight channels in these...

The atmosphere created in a screenplay, how the screenwriter presents it, and how the reader perceives it are some of the most fundamental topics in studying the aesthetics of screenwriting, a significant part of which is writing audio descriptions. This paper discusses one of the most critical and necessary foundations of screenwriting - creating the auditory atmosphere of the film - in eight notable screenplays of Farhadi’s films based on Michel Chion’s theory with an emphasis on the elements of voice over, acousmatic, acousmetre, music and sound effects, and ambience. This theory deals with materialised signs of sound, which are the details that make us feel the tangible presence of the sound and also know what kind they are, and what the surplus-value is that the auditory atmosphere could never have had without being written down.

Correction for ‘A testis-derived macroporous 3D scaffold as a platform for the generation of mouse testicular organoids’ by Tohid Rezaei Topraggaleh et al., Biomater. Sci., 2019, 7, 1422–1436, DOI: 10.1039/C8BM01001C.

BACKGROUND: Currently, there is an urgent need for scalable and reliable in vitro models to assess the effects of therapeutic entities on the human liver. Hepatoma cell lines, including Huh-7, show weakly resemblance to human hepatocytes, limiting their significance in toxicity studies. Co-culture of hepatic cells with non-parenchymal cells, and the presence of extracellular matrix have been shown to influence the biological behavior of hepatocytes. The aim of this study was to generate the scalable and functional hepatic micro-tissues (HMTs). METHODS: The size-controllable HMTs were generated through co-culturing of Huh-7 cells by mesenchymal stem cells and human umbilical vein endothelial cells in a composite hydrogel of liver-derived extracellular matrix and alginate, using an air-driven droplet generator. RESULTS: The generated HMTs were functional throughout a culture period of 28 days, as assessed by monitoring glycogen storage, uptake of low-density lipoprotein and indocyanine green. The HMTs also showed increased secretion levels of albumin, alpha-1-antitrypsin, and fibrinogen, and production of urea. Evaluating the expression of genes involved in hepatic-specific and drug metabolism functions indicated a significant improvement in HMTs compared to two-dimensional (2D) culture of Huh-7 cells. Moreover, in drug testing assessments, HMTs showed higher sensitivity to hepatotoxins compared to 2D cultured Huh-7 cells. Furthermore, induction and inhibition potency of cytochrome P450 enzymes confirmed that the HMTs can be used for in vitro drug screening. CONCLUSION: Overall, we developed a simple and scalable method for generation of liver micro-tissues, using Huh-7, with improved hepatic-specific functionality, which may represent a biologically relevant platform for drug studies. ELECTRONIC SUPPLEMENTARY MATERIAL: The online version of this article (10.1007/s13770-020-00272-6) contains supplementary material, which is available to authorized users.

Application of an appropriate freezing carrier is crucial for improving post-thaw recovery of oligozoospermic samples. In this study, our purpose is developing a user-friendly, easy handling and close micro-quantity (MQ) straw along with different freezing media, for cryopreservation of oligozoospermic samples. Twenty oligozoospermic semen samples were collected and mixed with glycerol egg yolk citrate (GEYC) or Spermfreeze® (SPF) medium. The mixture was loaded into MQ straws, sealed and stored in liquid nitrogen (LN) vapor. After freezing, the straws were transferred into cryotube and plunged into LN. Post-thawed sperm parameters including motion characteristics, viability, membrane and DNA integrity were evaluated one and three months after cryopreservation. The post-thawed sperm parameters were significantly reduced in GEYC and SPF medium compared to fresh samples. No statistically significant differences were seen in sperm characteristics between the two storage times (i.e. month 1 vs. month 3). Furthermore, GEYC medium yielded higher motility, viability and membrane integrity compared to SPF at both storage time-points. Sperm DNA integrity was also improved in GEYC group compared to SPF after 1 month of storage. The findings of our study showed that application of MQ straw along with GEYC, as the cryoprotectant, was beneficial for cryopreservation of low count semen samples.

Cell therapy has become a novel promising approach for improvement of cardiac functional capacity in the instances of ventricular remodeling and fibrosis caused by episodes of coronary artery occlusion and hypoxia. The challenge toward enhancing cell engraftment as well as formation of functional tissue, however, necessitated combinatorial approaches. Here, we complemented human embryonic stem cell-derived cardiac progenitor cell (hESC-CPC) therapy by heparin-conjugated, vascular endothelial growth factor (VEGF)-loaded fibrin hydrogel as VEGF delivery system. Transplantation of these cardiac committed cells along with sustained VEGF release could surpass the cardiac repair effects of each constituent alone in a rat model of acute myocardial infarction. The histological sections of rat hearts revealed improved vascularization as well as inclusion of hESC-CPC-derived cardiomyocytes, endothelial, and smooth muscle cells in host myocardium. Thus, co-transplantation of hESC-CPC and proangiogenic factor by a suitable delivery rate may resolve the shortcomings of conventional cell therapy.

Extracellular matrix-derived scaffolds provide an efficient platform for the generation of organ-like structures. Successful development of testicular organoids (TOs) with the capability of supporting complete spermatogenesis has not been reported yet. Here, we have developed an optimized method for the decellularization of ram testicular tissue fragments. Our findings showed that testicular fragments treated with a serial combination of Triton X-100 and SDS in PBS for 48 h resulted in the efficient removal of cellular materials and retention of the extracellular matrix (ECM) components. In order to fabricate testis-derived scaffolds (TDSs), the testicular ECM (T-ECM) was digested in acid/pepsin, followed by neutralization of pre-gel solution to form a hydrogel. Then, the hydrogels were freeze-dried and cross-linked using a chemical method. To reach the optimal concentration for the T-ECM in the fabrication of TDSs, the scaffold properties including porosity, pore size, swelling behavior, and degradation were evaluated. Our study suggested that 25 mg ml-1 of the T-ECM is the best concentration for the fabrication of macroporous TDSs for demonstrating lower pore size, homogeneously distributed pores, and a higher swelling ratio. Furthermore, inoculation of neonatal mouse testicular cells onto TDSs resulted in the generation of multicellular TOs in which the differentiation of spermatogonial cells into post-meiotic cells was confirmed. Hormonal analysis of TDSs revealed the functionality of TOs in the secretion of testosterone and inhibin B. The current study also demonstrated that macroporous TDSs could provide a novel platform for testicular tissue engineering and in vitro spermatogenesis.

The present work reports the beneficial effects of using a microplatform on the development of mouse single blastomeres (SBs) to the blastocyst stage. Development of blastocysts from SBs separated from two- and four-cell stage embryos (two- and four-cell SBs) can provide a valuable supply both for couples who use fertility-assisted techniques and farm animals. As a step forward, we introduce three chips that provide the possibility of culturing SBs separately, in groups, and in the vicinity of the intact embryo (co-culture), while each well of the chips is assigned to an isolated SB. Two- and four-cell SBs co-cultured with intact embryos showed 97.1% and 76.6% developmental rates and up to 34.1% and 49.1% growth relative to the microdroplet method (control). We examined the quality of developed blastocysts by assessing the total cell number, the number of inner cell mass (ICM) according to the octamer-binding transcription factor 4 marker (OCT4), and trophectoderm (TE). Co-culture of SBs with an intact embryo in a chip with nanoscale culture medium volume also increased the cell population of the developed embryo. The ICM:TE ratio, which is the most important blastocyst quality parameter, also indicated that developed two-cell SBs have a higher degree of similarity to intact embryos despite fewer numbers of total cells.

Personalized cancer therapy applies specific treatments to each patient. Using personalized tumor models with similar characteristics to the original tumors may result in more accurate predictions of drug responses in patients. Tumor organoid models have several advantages over pre-existing models, including conserving the molecular and cellular composition of the original tumor. These advantages highlight the tremendous potential of tumor organoids in personalized cancer therapy, particularly preclinical drug screening and predicting patient responses to selected treatment regimens. Here, we highlight the advantages, challenges, and translational potential of tumor organoids in personalized cancer therapy and focus on gene-drug associations, drug response prediction, and treatment selection. Finally, we discuss how microfluidic technology can contribute to immunotherapy drug screening in tumor organoids.

Organ and tissue shortage are known as a crucially important public health problem as unfortunately a small percentage of patients receive transplants. In the context of emerging regenerative medicine, researchers are trying to regenerate and replace different organs and tissues such as the liver, heart, skin, and kidney. Liver tissue engineering (TE) enables us to reproduce and restore liver functions, fully or partially, which could be used in the treatment of acute or chronic liver disorders and/or generate an appropriate functional organ which can be transplanted or employed as an extracorporeal device. In this regard, a variety of techniques (e.g., fabrication technologies, cell-based technologies, microfluidic systems and, extracorporeal liver devices) could be applied in tissue engineering in liver regenerative medicine. Common TE techniques are based on allocating stem cell-derived hepatocyte-like cells or primary hepatocytes within a three-dimensional structure which leads to the improvement of their survival rate and functional phenotype. Taken together, new findings indicated that developing liver tissue engineering-based techniques could pave the way for better treatment of liver-related disorders. Herein, we summarized novel technologies used in liver regenerative medicine and their future applications in clinical settings.

Objective In the present study, the applicability of hyaluronic acid-alginate (HAA) hydrogel and ovarian cells (OCs) for the culture of mouse ovarian follicles were investigated and compared with those of alginate (ALG) and fibrin-alginate (FA) hydrogels. Materials And Methods In the first step of this experimental study, mechanically isolated preantral follicles from the ovaries of two-week-old mice were encapsulated in the absence or presence of OCs in ALG, HAA, and FA hydrogels and cultured for 14 days. The morphology, diameter, survival and antrum formation rates of the follicles and the maturation and quality of the oocytes were evaluated during culture. In the second step, preantral follicles were cultured similar to the first step, but for 13 days, and their gene expressions and hormonal secretion were assessed on the last day of culture. Results In the absence of OCs, higher numbers of ALG- and HAA-encapsulated follicles reached the antral stage compared to FA-encapsulated follicles (P

Differentiation of stem cells into mature cells through the use of physical approaches is of great interest. Here, we prepared smart nanoenvironments by cell-imprinted substrates based on chondrocytes, tenocytes, and semifibroblasts as templates and demonstrated their potential for differentiation, redifferentiation, and transdifferentiation. Analysis of shape and upregulation/downregulation of specific genes of stem cells, which were seeded on these cell-imprinted substrates, confirmed that imprinted substrates have the capability to induce specific shapes and molecular characteristics of the cell types that were used as templates for cell-imprinting. Interestingly, immunofluorescent staining of a specific protein in chondrocytes (i.e., collagen type II) confirmed that adipose-derived stem cells, semifibroblasts, and tenocytes can acquire the chondrocyte phenotype after a 14 day culture on chondrocyte-imprinted substrates. In summary, we propose that common polystyrene tissue culture plates can be replaced by this imprinting technique as an effective and promising way to regulate any cell phenotype in vitro with significant potential applications in regenerative medicine and cell-based therapies.

A major hindrance in islet transplantation as a feasible therapeutic approach for patients with type 1 diabetes is the insufficient oxygenation of the grafts, which results in cell death in portions of the implant. Here we address this limitation through the application of oxygen-generating microparticles (MP) and a fibrin-conjugated heparin/VEGF collagen scaffold to support cell survival by using a β cell line and pancreatic rat islets. MP are composed of a polyvinylpyrrolidone/hydrogen peroxide (PVP/H2O2) core and poly(D,L-lactide-co-glycolide) (PLGA) shell, along with immobilized catalase on the shell. The presence of MP is sufficient to reduce hypoxia-induced cell dysfunction and death for both cell types, resulting in localization of hypoxia-inducible factor (HIF-1α) into the cytoplasm and enhanced metabolic function. After co-transplantation of MP and a reduced islet mass (250 islet equivalents) within an angiogenic scaffold in the omental pouch of streptozotocin-induced diabetic nude mice, we have observed significantly promoted graft function as evidenced by improved blood glucose levels, body weight, glucose tolerance, serum C-peptide, and graft revascularization. These results suggest that the developed platform has great potential to enhance the efficacy for implants in cases where the cell dosage is critical for efficacy, such as islet transplantation and ischemic tissues.

Manufacturing macroscale cell-laden architectures is one of the biggest challenges faced nowadays in the domain of tissue engineering. Such living constructs, in fact, pose strict requirements for nutrients and oxygen supply that can hardly be addressed through simple diffusion in vitro or without a functional vasculature in vivo. In this context, in the last two decades, a substantial amount of work has been carried out to develop smart materials that could actively provide oxygen-release to contrast local hypoxia in large-size constructs. This review provides an overview of the currently available oxygen-releasing materials and their synthesis and mechanism of action, highlighting their capacities under in vitro tissue cultures and in vivo contexts. Additionally, we also showcase an emerging concept, herein termed as "living materials as releasing systems", which relies on the combination of biomaterials with photosynthetic microorganisms, namely algae, in an "unconventional" attempt to supply the damaged or re-growing tissue with the necessary supply of oxygen. We envision that future advances focusing on tissue microenvironment regulated oxygen-supplying materials would unlock an untapped potential for generating a repertoire of anatomic scale, living constructs with improved cell survival, guided differentiation, and tissue-specific biofunctionality.

To some extent, cell therapy for myocardial infarction (MI) has supported the idea of cardiac repair; however, further optimizations are inevitable. Combined approaches that comprise suitable cell sources and supporting molecules considerably improved its effect. Here, we devised a strategy of simultaneous transplantation of human cardiac progenitor cells (CPCs) and an optimized oxygen generating microparticles (MPs) embedded in fibrin hydrogel, which was injected into a left anterior descending artery (LAD) ligating-based rat model of acute myocardial infarction (AMI). Functional parameters of the heart, particularly left ventricular systolic function, markedly improved and reached pre-AMI levels. This functional restoration was well correlated with substantially lower fibrotic tissue formation and greater vascular density in the infarct area. Our novel approach promoted CPCs retention and differentiation into cardiovascular lineages. We propose this novel co-transplantation strategy for more efficient cell therapy of AMI which may function by providing an oxygen-rich microenvironment, and thus regulate cell survival and differentiation.

Separating cells from the body and cultivating them in vitro will alter the function of cells. Therefore, for optimal cell culture in the laboratory, conditions similar to those of their natural growth should be provided. In previous studies, it has been shown that the use of cellular shape at the culture surface can regulate cellular function. In this work, the efficiency of the imprinting method increased by using microfluidic chip design and fabrication. In this method, first, a cell-imprinted substrate of chondrocytes was made using a microfluidic chip. Afterwards, stem cells were cultured on a cell-imprinted substrate using a second microfluidic chip aligned with the substrate. Therefore, stem cells were precisely placed on the chondrocyte patterns on the substrate and their fibroblast-like morphology was changed to chondrocyte's spherical morphology after 14-days culture in the chip without using any chemical growth factor. After chondrogenic differentiation and in vitro assessments (real-time PCR and immunocytotoxicity), differentiated stem cells were transferred on a collagen-hyaluronic acid scaffold and transplanted in articular cartilage defect of the rabbit. After 6 months, the post-transplantation analysis showed that the articular cartilage defect had been successfully regenerated in differentiated stem cell groups in comparison with the controls. In conclusion, this study showed the potency of the imprinting method for inducing chondrogenicity in stem cells, which can be used in clinical trials due to the safety of the procedure.

We present in this paper an image processing technique called Circular Distortion and Motion Compensation (CDMC) that can perform real-time retinal processing with geometric compensation for the ring structure arraignment in the retina for bipolar and ganglion cells. The system was running on an embedded platform of Raspberry Pi 3 and managed to achieve a respectable 12 frames per second on a $640\times 480$ resolution live video capture from a webcam. The system emulates biological processes occurring in the retina such as motion estimation and temporal filtering while compensating for the radial shift of ganglion and bipolar cells in human retina. The proposed algorithm is efficient enough to run on mobile hardware with battery powered device in real-time and it is ideal for high resolution optogenetic stimulation devices that targets the retina.

Since there is dearth of practical ways to obtain mature follicles from cryopreserved or native ovarian tissues, especially in patients suffering from ovarian dysfunction, tissue engineering may help in restoring ovarian function and/or fertility. In the present study, the effects of sodium dodecyl sulfate (SDS) and sodium hydroxide (NaOH) on the decellularization of ovarian tissues were studied in order to ascertain their suitability in creating suitable bioscaffolds. Cells were removed from the ovarian tissues of mouse, sheep and human. The samples were distributed among three groups, viz., control (not treated), SDS and NaOH treated. Qualitative histological evaluations, quantitative assessments (nuclear contents, collagen and glycosaminoglycan), immunohistochemistry staining (for laminin, fibronectin and Collagen I), cell viability and scanning electron microscopic (SEM) assays were performed for all experimental groups. Finally, suspensions of mouse ovarian cells were injected into human NaOH treated scaffolds and subsequently auto-transplanted to ovariectomized mice. HE and IHC staining (GDF-9) were performed on human recellularized NaOH treated scaffolds 1 month after auto-transplantation. Although histological studies and quantitative evaluations confirmed the successful decellularization and presence of key factors in ovarian scaffolds under both treatment methods, NaOH showed more interesting outcomes. Cell metabolic activity in sheep and human ovaries treated with NaOH was statistically (p 0.05) higher than for SDS treated samples after 72 h. Moreover, spherical associations with cuboidal cells in human NaOH treated scaffolds were observed and this follicular reconstruction was also confirmed by GDF-9. NaOH was found to be more suitable than SDS for the decellularization of ovarian tissues and it supports follicular reconstruction better than SDS. This is a valuable finding in tissue engineering research and can help in the creation of appropriate ovarian bioscaffolds.

We present an easy, durable method to generate a partially hydrophilic/hydrophobic poly(dimethylsiloxane) (PDMS) microfluidic device. The functionality of this device was assessed in a double flow focusing design to fabricate core-shell structured poly(lactic-co-glycolic acid) (PLGA) microparticles (MPs).

Phase pure (HAp) and fluoride-substituted apatite (FHAp) powders were synthesized by the hydrothermal method and their specific surface area was determined by atomic force microscopy (AFM). Human osteoblast cells were used to evaluate the bioactivity of the samples. The influence of fluoride ions on the alteration of cell medium components was analyzed using UV–visible spectroscopy in different exposure times. The protein interaction behavior with the pure and substituted powders was assessed by the Bradford method and SDS-PAGE analysis. The mRNA expression level was detected by real time PCR and it was observed that the presence of an optimal level of fluoride ions in the apatite structure has an inductive effect on collagen I and alkaline phosphatase (ALP) expression levels. A similar trend was also observed in the protein adsorption profile indicating that the fluoride content in the apatite lattice has a significant impact on controlling its biological performance. The maximum protein adsorption was observed on the sample with the chemical composition of Ca10(PO4)6(OH)1.33F0.67.

Polyvinyl alcohol (PVA) hydrogel chains were crosslinked by urethane pre-polymer (PPU) in order to fabricate a new substitute for cartilage lesions. The microscopy images showed that the cultured chondrocytes had spherical morphology on PVA-PPU sample after 4 weeks of isolation in vitro. The alcian blue and safranin O staining proved the presence of proteoglycan on the surface of PVA-PPU sample secreted by cultured chondrocytes. This was confirmed by the detection of sulfate ions in the wavelength dispersive X-ray (WDX) analysis. In addition, the expression of collagen type II and aggrecan were observed in chondrocytes cultured on PVA-PPU by RT-PCR. Moreover, the implantation of the PVA-PPU sample with autologous cultured chondrocytes revealed the formation of neocartilage tissue in a rabbit model during 12 weeks follow up. In conclusion, the results verified that isolated chondrocytes cultured on PVA-PPU retain their original phenotype and this composition can be considered as promising substrate for cartilage tissue engineering.

Cry segmentation is an essential preprocessing step in any infant crying diagnosis system. Besides crying sounds consisting of expiration phases followed by short periods of inspiration episodes, each recording of newborn cries also includes silence sections as well as other sounds such as speech of caregivers, noise and sound of medical equipments. This paper is devoted to a newly developed Empirical Mode Decomposition (EMD) application to cry segmentation. The goal of the segmentation is to detect cry episodes automatically from unimportant acoustic activities existed inside the recorded signals. EMD decomposes a multicomponent non stationary signal into a set of monocomponent signals called Intrinsic Mode Functions (IMFs). The cry signals are segmented using Hidden Markov Models (HMMs) applied to the features extracted by employing EMD combined with Mel-Frequency Cepstral coefficients to the recorded cry signals. The performance of the proposed approach is evaluated on a database of 200 cry signals recorded in a real clinical environment. The experimental results demonstrate the effectiveness and suitability of the proposed method for the automatic cry segmentation.

Over the past decades, tremendous efforts have been made to establish pancreatic islet transplantation as a standard therapy for type 1 diabetes. Recent advances in islet transplantation have resulted in steady improvements in the 5-year insulin independence rates for diabetic patients. Here we review the key challenges encountered in the islet transplantation field which include islet source limitation, sub-optimal engraftment of islets, lack of oxygen and blood supply for transplanted islets, and immune rejection of islets. Additionally, we discuss possible solutions for these challenges.

Pure hydroxyapatite (HAp) and fluoride-containing apatite powders (FHAp) were synthesized using a hydrothermal method. The powders were assessed by x-ray diffraction (XRD), Fourier transform infrared (FTIR), scanning electron microscope (SEM) and F-selective electrode. X-ray diffraction results revealed the formation of single phase apatite structure for all the compositions synthesized in this work. However, the addition of a fluoride ion led to a systematic shift in the (3 0 0) peak of the XRD pattern as well as modifications in the FTIR spectra. It was found that the efficiency of fluoride ion incorporation decreased with the increase in the fluoride ion content. Fluorine incorporation efficiency was around 60% for most of the FHAp samples prepared in the current study. Smaller and less agglomerated particles were obtained by fluorine substitution. The bioactivity of the powder samples with different fluoride contents was compared by performing cell proliferation, alkaline phosphatase (ALP) and Alizarin red staining assays. Human osteoblast cells were used to assess the cellular responses to the powder samples in this study. Results demonstrated a strong dependence of different cell activities on the level of fluoridation.

It is well established that surface topography can affect cell functions. However, finding a reproducible and reliable method for regulating stem cell behavior is still under investigation. It has been shown that cell imprinted substrates contain micro- and nanoscale structures of the cell membrane that serve as hierarchical substrates, can successfully alter stem cell fate. This study investigated the effect of the overall cell shape by fabricating silicon wafers containing pit structure in the average size of spherical-like chondrocytes using photolithography technique. We also used chondrocyte cell line (C28/I2) with spindle-like shape to produce cell imprinted substrates. The effect of all substrates on the differentiation of adipose-derived mesenchymal stem cells (ADSCs) has been studied. The AFM and scanning electron microscopy images of the prepared substrates demonstrated that the desired shapes were successfully transferred to the substrates. Differentiation of ADSCs was investigated by immunostaining for mature chondrocyte marker, collagen II, and gene expression of collagen II, Sox9, and aggrecan markers. C28/I2 imprinted substrate could effectively enhanced chondrogenic differentiation compared to regular pit patterns on the wafer. It can be concluded that cell imprinted substrates can induce differentiation signals better than engineered lithographic substrates. The nanostructures on the cell-imprinted patterns play a crucial role in harnessing cell fate. Therefore, the patterns must include the nano-topographies to have reliable and reproducible engineered substrates.