Search

This work describes cryogenic ex situ lift out (cryo-EXLO) of cryogenic focused ion beam (cryo-FIB) thinned specimens for analysis by cryogenic transmission electron microscopy (cryo-TEM). The steps and apparatus necessary for cryo-EXLO are described. Methods designed to limit ice contamination include use of an anti-frost lid, a vacuum transfer assembly, and a cryostat. Cryo-EXLO is performed in a cryostat with the cryo-shuttle holder positioned in the cryogenic vapor phase above the surface of liquid N2 (LN2) using an EXLO manipulation station installed inside a glove box maintained at < 10% relative humidity and inert (e.g., N2 gas) conditions. Thermal modeling shows that a cryo-EXLO specimen will remain vitreous within its FIB trench indefinitely while LN2 is continuously supplied. Once the LN2 is cut off, modeling shows that the EXLO specimen will remain vitreous for over 4 min, allowing sufficient time for the cryo-transfer steps which take only seconds to perform. Cryo-EXLO was applied successfully to cryo-FIB-milled specimen preparation of a polymer sample and plunge-frozen yeast cells. Cryo-TEM of both the polymer and the yeast shows minimal ice contamination with the yeast specimen maintaining its vitreous phase, illustrating the potential of cryo-EXLO for cryo-FIB-TEM of beam-sensitive, liquid, or biological materials.

This article introduces a training simulator for electron beam alignment using Ronchigrams. The interactive web application, www.ronchigram.com, is an advanced educational tool aimed at making scanning transmission electron microscopy (STEM) more accessible and open. For experienced microscopists, the tool offers on-hand quantification of simulated Ronchigrams and their resolution limits.

As a real-space technique, atomic-resolution STEM imaging contains both amplitude and geometric phase information about structural order in materials, with the latter encoding important information about local variations and heterogeneities present in crystalline lattices. Such phase information can be extracted using geometric phase analysis (GPA), a method which has generally focused on spatially mapping elastic strain. Here we demonstrate an alternative phase demodulation technique and its application to reveal complex structural phenomena in correlated quantum materials. As with other methods of image phase analysis, the phase lock-in approach can be implemented to extract detailed information about structural order and disorder, including dislocations and compound defects in crystals. Extending the application of this phase analysis to Fourier components that encode periodic modulations of the crystalline lattice, such as superlattice or secondary frequency peaks, we extract the behavior of multiple distinct order parameters within the same image, yielding insights into not only the crystalline heterogeneity but also subtle emergent order parameters such as antipolar displacements. When applied to atomic-resolution images spanning large (~0.5 × 0.5 μm2) fields of view, this approach enables vivid visualizations of the spatial interplay between various structural orders in novel materials.

Hydrogen energy-based electrochemical energy conversion technologies offer the promise of enabling a transition of the global energy landscape from fossil fuels to renewable energy. Here, we present a comprehensive review of the fundamentals of electrocatalysis in alkaline media and applications in alkaline-based energy technologies, particularly alkaline fuel cells and water electrolyzers. Anion exchange (alkaline) membrane fuel cells (AEMFCs) enable the use of nonprecious electrocatalysts for the sluggish oxygen reduction reaction (ORR), relative to proton exchange membrane fuel cells (PEMFCs), which require Pt-based electrocatalysts. However, the hydrogen oxidation reaction (HOR) kinetics is significantly slower in alkaline media than in acidic media. Understanding these phenomena requires applying theoretical and experimental methods to unravel molecular-level thermodynamics and kinetics of hydrogen and oxygen electrocatalysis and, particularly, the proton-coupled electron transfer (PCET) process that takes place in a proton-deficient alkaline media. Extensive electrochemical and spectroscopic studies, on single-crystal Pt and metal oxides, have contributed to the development of activity descriptors, as well as the identification of the nature of active sites, and the rate-determining steps of the HOR and ORR. Among these, the structure and reactivity of interfacial water serve as key potential and pH-dependent kinetic factors that are helping elucidate the origins of the HOR and ORR activity differences in acids and bases. Additionally, deliberately modulating and controlling catalyst–support interactions have provided valuable insights for enhancing catalyst accessibility and durability during operation. The design and synthesis of highly conductive and durable alkaline membranes/ionomers have enabled AEMFCs to reach initial performance metrics equal to or higher than those of PEMFCs. We emphasize the importance of using membrane electrode assemblies (MEAs) to integrate the often separately pursued/optimized electrocatalyst/support and membranes/ionomer components. Operando/in situ methods, at multiscales, and ab initio simulations provide a mechanistic understanding of electron, ion, and mass transport at catalyst/ionomer/membrane interfaces and the necessary guidance to achieve fuel cell operation in air over thousands of hours. We hope that this Review will serve as a roadmap for advancing the scientific understanding of the fundamental factors governing electrochemical energy conversion in alkaline media with the ultimate goal of achieving ultralow Pt or precious-metal-free high-performance and durable alkaline fuel cells and related technologies. This work was supported by the Center for Alkaline-Based Energy Solutions, an Energy Frontier Research Center program supported by the U.S. Department of Energy, under Grant DE-SC0019445. This work acknowledges the long-term support of TEM facilities at the Cornell Center for Materials Research (CCMR) which are supported through the National Science Foundation Materials Research Science and Engineering Center (NSF MRSEC) program (DMR1719875), and Cornell high-energy synchrotron sources (CHESS), which is supported by the National Science Foundation under Award DMR-1332208.

The growing demands for high-energy density electrical energy storage devices stimulate the coupling of conversion-type cathodes and lithium (Li) metal anodes. While promising, the use of these “Li-free” cathodes brings new challenges to the Li anode interface, as Li needs to be dissolved first during cell operation. In this study, we have achieved a direct visualization and comprehensive analysis of the dynamic evolution of the Li interface. The critical metrics of the interfacial resistance, Li growth, and solid electrolyte interface (SEI) distribution during the initial dissolution/deposition processes were systematically investigated by employing multidimensional analysis methods. They include three-electrode impedance tests, in situ atomic force microscopy, scanning electrochemical microscopy, and cryogenic scanning transmission electron microscopy. The high-resolution imaging and real-time observations show that a loose, diffuse, and unevenly distributed SEI is formed during the initial dissolution process. This leads to the dramatically fast growth of Li during the subsequent deposition, deviating from Fick’s law, which exacerbates the interfacial impedance. The compactness of the interfacial structure and enrichment of electrolyte species at the surface during the initial deposition play critical roles in the long-term stability of Li anodes, as revealed by operando confocal Raman spectroscopic mapping. Our observations relate to ion transfer, morphological and structural evolution, and Li (de)solvation at Li interfaces, revealing the underlying pathways influenced by the initial dissolution process, which promotes a reconsideration of anode investigations and effective protection strategies.

Nickel-based superconductors provide a long-awaited experimental platform to explore possible cuprate-like superconductivity. Despite similar crystal structure and d electron filling, however, superconductivity in nickelates has thus far only been stabilized in thin-film geometry, raising questions about the polar interface between substrate and thin film. Here we conduct a detailed experimental and theoretical study of the prototypical interface between Nd1−xSrxNiO2 and SrTiO3. Atomic-resolution electron energy loss spectroscopy in the scanning transmission electron microscope reveals the formation of a single intermediate Nd(Ti,Ni)O3 layer. Density functional theory calculations with a Hubbard U term show how the observed structure alleviates the polar discontinuity. We explore the effects of oxygen occupancy, hole doping and cation structure to disentangle the contributions of each for reducing interface charge density. Resolving the non-trivial interface structure will be instructive for future synthesis of nickelate films on other substrates and in vertical heterostructures.

Association of organic matter (OM) with mineral phases via co-precipitation is expected to be a widespread process in environments with high OM input and frequent mineral dissolution and re-precipitation. In contrast to surface area-limited adsorption processes, co-precipitation may allow for greater carbon (C) accumulation. However, the potential sub-micrometer scale structural and compositional differences that affect the bioavailability of co-precipitated C are largely unknown. In this study, we used a combination of high-resolution analytical electron microscopy and bulk spectroscopy to probe interactions between a mineral phase (ferrihydrite, nominally Fe2O3•0.5H2O) and organic soil-derived water-extractable OM (WEOM). In co-precipitated WEOM-Fe, nanometer-scale scanning transmission electron microscopy with electron energy loss spectroscopy (STEM-EELS) revealed increased Fe(II) and less Fe aggregation relative to adsorbed WEOM-Fe. Spatially distinct lower- and higher-energy C regions were detected in both adsorbed and co-precipitated WEOM-Fe. In co-precipitates, lower-energy aromatic and/or substituted aromatic C was spatially associated with reduced Fe(II), but higher-energy oxidized C was enriched at the oxidized Fe(III) interface. Therefore, we show that co-precipitation does not constitute a non-specific physical encapsulation of C that only affects Fe chemistry and spatial distribution, but may cause a bi-directional set of reactions that lead to spatial separation and transformation of both Fe and C forms. In particular, we propose that abiotic redox reactions between Fe and C via substituted aromatic groups (e.g., hydroquinones) play a role in creating distinct co-precipitate composition, with potential implications for its mineralization.

Cation exchange is becoming extensively used for nanocrystal (NC) doping in order to produce NCs with unique optical and electronic properties. However, despite its ever-increasing use, the relationships between the cation exchange process, its doped NC products, and the resulting NC photophysics are not well characterized. For example, similar doping procedures on NCs with the same chemical compositions have resulted in quite different photophysics. Through a detailed single molecule investigation of a post-synthesis Ag+ doping of CdSe NCs, a number of species were identified within a single doped NC sample, suggesting the differences in the optical properties of the various synthesis methods are due to the varied contributions of each species. Electrostatic force microscopy (EFM), electron energy loss spectroscopy (EELS) mapping, and single molecule photoluminescence (PL) studies were used to identify four possible species resulting from the Ag+-CdSe cation exchange doping process. The heterogeneity of these samples shows the difficulty in controlling a post-synthesis cation exchange method to produce homogenous samples needed for use in any potential application. Additionally, the heterogeneity in the doped samples demonstrates that significant care must be taken in describing the ensemble or average characteristics of the sample.

ConspectusThe rich physics permeating the phase diagrams of quantum materials have commanded the attention of the solid-state chemistry, materials science, and condensed-matter physics communities, sparking immense research into quantum phase transitions including superconducting, ferroic, and charge-order transitions. Many of these transitions occur at low temperatures and involve electronic, magnetic, or lattice order, which emerges on the atomic to mesoscopic scales. The complex interplay of these states and the heterogeneity that arises due to competition and intertwining of phases, however, is not fully understood and requires probes that capture ordering over multiple length scales down to the local atomic symmetries. Advances in scanning transmission electron microscopy (STEM) have enabled atomic-resolution imaging as well as mapping of functional picometer-scale atomic displacements inside materials. In this Account, we discuss our group's work to expand the reach of atomic-resolution STEM to cryogenic temperatures (cryo-STEM) to study quantum materials with focus on charge-ordered systems.Charge-ordered phases, in which electrons as well as the atomic lattice form periodic patterns that lift the translational symmetries of the crystal, are not only intertwined with superconductivity but also underlie other exotic electronic phenomena such as colossal magnetoresistance and metal-insulator transitions. The periodic lattice distortions (PLDs) modulate the positions of the crystal's nuclei, which can be readily probed by electron microscopy. In a set of examples, we demonstrate cryo-STEM as a powerful technique for probing local order, nanometer-scale heterogeneities, and topological defects in charge-ordered manganites and in transition metal dichalcogenide charge density wave (CDW) systems.With the nearly commensurate-to-commensurate CDW transition upon cooling in 1T-TaS2, we show that nanoscale lattice textures in CDW phases can be revealed through direct imaging. These early atomic-resolution results, however, also highlighted the need for improvements in cryo-STEM imaging, which led to a push to advance data collection and analysis for direct spatial mapping and quantification of PLDs. By introducing an image registration algorithm developed specifically to accommodate fast, low signal-to-noise image acquisitions of crystalline lattices, we address previous limitations due to sample drift in cryo-STEM experiments. This has enabled subangstrom cryo-STEM imaging with sufficient signal-to-noise to reveal the low temperature structure of 1T'-TaTe2. Furthermore, it allows mapping and quantification of PLD atomic displacements in the charge-ordered manganites Bi0.35Sr0.18Ca0.47MnO3 and Nd0.5Sr0.5MnO3 with picometer precision at ∼95 K to resolve not only distinct ordered phases (i.e., site- and bond-centered charge order) but also their nanoscale coexistence within the same sample.Atomic-resolution cryo-STEM opens new opportunities for understanding the microscopic underpinnings of quantum phases. In this Account, we focus on spatial mapping of lattice degrees of freedom in phases that are present at temperatures down to liquid nitrogen. Further advances in instrumentation are needed to expand the temperature range and to also enable atomic-resolution measurements that rely on weaker signals such as electron energy loss spectroscopy (EELS) for probing of electronic structure or 4D-STEM approaches to map electric and magnetic fields.

The Ruddlesden-Popper ($A_{n+1}B_{n}\text{O}_{3n+1}$) compounds are a highly tunable class of materials whose functional properties can be dramatically impacted by their structural phase $n$. The negligible energetic differences associated with forming a sample with a single value of $n$ versus a mixture of $n$ makes the growth of these materials difficult to control and can lead to local atomic-scale structural variation arising from small stoichiometric deviations. In this work, we present a Python analysis platform to detect, measure, and quantify the presence of different $n$-phases based on atomic-resolution scanning transmission electron microscopy (STEM) images in a statistically rigorous manner. We employ phase analysis on the 002 Bragg peak to identify horizontal Ruddlesden-Popper faults which appear as regions of high positive compressive strain within the lattice image, allowing us to quantify the local structure. Our semi-automated technique offers statistical advantages by considering effects of finite projection thickness, limited fields of view, and precise sampling rates. This method retains the real-space distribution of layer variations allowing for a spatial mapping of local $n$-phases, enabling both quantification of intergrowth occurrence as well as qualitative description of their distribution, opening the door to new insights and levels of control over a range of layered materials., 8 pages, 5 figures

Physical and chemical processes at solid-liquid interfaces play a crucial role in many natural and technological phenomena, including catalysis, solar energy and fuel generation, and electrochemical energy storage. Nanoscale characterization of such interfaces has recently been achieved using cryogenic electron microscopy, thereby providing a new path to advancing our fundamental understanding of interface processes. This contribution provides a practical guide to mapping the structure and chemistry of solid-liquid interfaces in materials and devices using an integrated cryogenic electron microscopy approach. In this approach, we pair cryogenic sample preparation which allows stabilization of solid-liquid interfaces with cryogenic focused ion beam (cryo-FIB) milling to create cross-sections through these complex buried structures. Cryogenic scanning electron microscopy (cryo-SEM) techniques performed in a dual-beam FIB/SEM enable direct imaging as well as chemical mapping at the nanoscale. We discuss practical challenges, strategies to overcome them, as well as protocols for obtaining optimal results. While we focus in our discussion on interfaces in energy storage devices, the methods outlined are broadly applicable to a range of fields where solid-liquid interface play a key role.

The spatial distribution of organic substrates and microscale soil heterogeneity significantly influence organic matter (OM) persistence as constraints on OM accessibility to microorganisms. However, it is unclear how changes in OM spatial heterogeneity driven by factors such as soil depth affect the relative importance of sub-strate spatial distribution on OM persistence. This work evaluated the decomposition and persistence of 13C and 15N labeled water-extractable OM inputs over 50 days as either hotspot (i.e., pelleted in 1-2 mm-size pieces) or distributed (i.e., added as OM < 0.07 mu m suspended in water) forms in topsoil (0-0.2 m) and subsoil (0.8-0.9 m) samples of an Andisol. We observed greater persistence of added C in the subsoil with distributed OM inputs relative to hotspot OM, indicated by a 17% reduction in cumulative mineralization of the added C and a 10% higher conversion to mineral-associated OM. A lower substrate availability potentially reduced mineralization due to OM dispersion throughout the soil. NanoSIMS (nanoscale secondary ion mass spectrometry) analysis identified organo-mineral associations on cross-sectioned aggregate interiors in the subsoil. On the other hand, in the topsoil, we did not observe significant differences in the persistence of OM, suggesting that the large amounts of particulate OM already present in the soil outweighed the influence of added OM spatial distribution. Here, we demonstrated under laboratory conditions that the spatial distribution of fresh OM input alone significantly affected the decomposition and persistence of OM inputs in the subsoil. On the other hand, spatial distribution seems to play a lower role in topsoils rich in particulate OM. The divergence in the influence of OM spatial distribution between the top and subsoil is likely driven by differences in soil mineralogy and OM composition. Technical University of Munich Institute for Advanced Study; NSF [DMR-1654596]; Packard Foundation; NSF MRSEC program [DMR-1719875]; Kavli Institute at Cornell; DOE EFRC BES [DE-SC0001086, NSF-MRI-1429155]; Cornell University; Weill Institute; KIC Published version The Technical University of Munich Institute for Advanced Study provided funding for this study. MJZ and LFK acknowledge support by the NSF (DMR-1654596) and Packard Foundation. This work used the Cornell Center for Materials Research Shared Facilities supported through the NSF MRSEC program (DMR-1719875). Additional support for the FIB/SEM cryo-stage and transfer system was provided by the Kavli Institute at Cornell (KIC) for Nanoscale Science and the Energy Materials Center at Cornell, DOE EFRC BES (DE-SC0001086). The FEI Titan Themis 300 was acquired through NSF-MRI-1429155, with additional support from Cornell University, the Weill Institute, and the KIC. The authors thank Katherine E. Grant and Louis A. Derry (Cornell University Earth and Atmospheric Sciences) for providing soil samples from the Polulu Flow, HI. The authors thank Akio Enders and Kelly Hanley for their technical support.

Pseudobrookite (Fe2TiO5) has attracted significant attention as an emerging photoanode for water oxidation due to reports of enhanced performance in polycrystalline heterostructures with α-Fe2O3 or...

Epitaxially connected quantum dot solids have emerged as an interesting class of quantum confined materials with the potential for highly tunable electronic structures. Realization of the predicted emergent electronic properties has remained elusive due in part to defective interdot epitaxial connections. Thermal annealing has shown potential to eliminate such defects, but a direct understanding of this mechanism hinges on determining the nature of defects in the connections and how they respond to heating. Here, we use in situ heating in the scanning transmission electron microscope to probe the effect of heating on distinct defect types. We apply a real space, local strain mapping technique, which allows us to identify tensile and shear strain in the atomic lattice, highlighting tensile, shear, and bending defects in interdot connections. We also track the out-of-plane orientation of individual QDs and infer the prevalence of out-of-plane twisting and bending defects as a function of annealing. We find that tensile and shear defects are fully relaxed upon mild thermal annealing, while bending defects persist. Additionally, out-of-plane orientation tracking reveals an increase in correctly oriented QDs, pointing to a relaxation of either twisting defects or out-of-plane bending defects. While bending defects remain, highlighting the need for further study of orientational ordering during the preattachment phase of superlattice formation, these atomic-scale insights show that annealing can effectively eliminate tensile and shear defects, a promising step toward delocalization of charge carriers and tunable electronic properties.