Search

The human nervous system inspires the next generation of sensory and communication systems for robotics, human‐machine interfaces (HMIs), biomedical applications, and artificial intelligence. Neuromorphic approaches address processing challenges; however, the vast number of sensors and their large‐scale distribution complicate analog data manipulation. Conventional digital multiplexers are limited by complex circuit architecture and high supply voltage. Large sensory arrays further complicate wiring. An ʻin‐electrolyte computingʼ platform is presented by integrating organic electrochemical transistors (OECTs) with a solid‐state polymer electrolyte. These devices use synapse‐like signal transport and spatially dependent bulk ionic doping, achieving over 400 times modulation in channel conductance, allowing discrimination of locally random‐access events without peripheral circuitry or address assignment. It demonstrates information processing from 12 tactile sensors with a single OECT output, showing clear advantages in circuit simplicity over existing all‐electronic, all‐digital implementations. This self‐multiplexer platform offers exciting prospects for circuit‐free integration with sensory arrays for high‐quality, large‐volume analog signal processing. [ABSTRACT FROM AUTHOR]

Perovskite semiconductors have experienced meteoric rise in a variety of optoelectronic applications. With a strong foothold on photovoltaics, much focus now lies on their light emission applications. Rapid progress in materials engineering have led to the demonstration of external quantum efficiencies that surpass the previously established theoretical limits. However, there remains much scope to further optimize the light propagation inside the device stack through careful tailoring of the optical processes that take place at the bulk and interface levels. Photon recycling in the emitter material followed by efficient outcoupling can result in boosting external efficiencies up to 100%. In addition, the poor ambient and operational stability of these materials and devices restrict further commercialization efforts. With best operational lifetimes of only a few hours reported, there is a long way to go before perovskite LEDs can be perceived as reliable alternatives to more established technologies like organic or quantum dot-based LED devices. This review article starts with the discussions of the mechanism of luminescence in these perovskite materials and factors impacting it. It then looks at the possible routes to achieve efficient outcoupling through nanostructuring of the emitter and the substrate. Next, we analyse the instability issues of perovskite-based LEDs from a photophysical standpoint, taking into consideration the underlying phenomena pertaining to defects, and summarize recent advances in mitigating the same. Finally, we provide an outlook on the possible routes forward for the field and propose new avenues to maximally exploit the excellent light-emitting capabilities of this family of semiconductors.

In the dynamic landscape of the Internet of Things (IoT), where smart devices are reshaping our world, nanomaterials can play a pivotal role in ensuring the IoT's sustainability. These materials are poised to redefine the development of smart devices, not only enabling cost-effective fabrication but also unlocking novel functionalities. As the IoT is set to encompass an astounding number of interconnected devices, the demand for environmentally friendly nanomaterials takes center stage. This Focus Issue spotlights cutting-edge research that explores the intersection of nanomaterials and sustainability. The collection delves deep into this critical nexus, encompassing a wide range of topics, from fundamental properties to applications in devices (e.g. sensors, optoelectronic synapses, energy harvesters, memory components, energy storage devices, and batteries), aspects concerning circularity and green synthesis, and an array of materials comprising organic semiconductors, perovskites, quantum dots, nanocellulose, graphene, and two-dimensional semiconductors. Authors not only showcase advancements but also delve into the sustainability profile of these materials, fostering a responsible endeavour toward a green IoT future. [ABSTRACT FROM AUTHOR]

Organic electrochemical transistors (OECTs) based complementary inverters have been considered as promising candidates in electrophysiological amplification, owing to their low power consumption, and high gain. To create complementary inverters, it is important to use highly stable p‐type and n‐type polymers with well‐balanced current. In this study, the electrochemical stability of p‐type ladder‐conjugated polymer‐based OECT is improved through an annealing process that maintains its doped‐state drain current from 76% to 105% after 4,500 cycles in ambient environment. Next an OECT‐based complementary inverter made from p‐type and n‐type ladder‐conjugated polymers (PBBTL and BBL) that possess ultra‐low power consumption (≈170 nW), high gain (67 V/V), and high noise margin (92%) with full rail‐to‐rail swing, is presented. Furthermore, its potential for amplifying the envelope of surface electromyography (EMG) for robotic hand control is demonstrated. The high variation in the output (0.35 V) allows the amplified EMG signals to be directly captured by a commercial analog‐to‐digital converter, which in turn controls the robot hand to grasp different objects with low delay and low noise. These results demonstrate the capability of OECT inverter‐based amplifier in future signal processing‐free human‐machine interface, particularly useful for prosthetic control and gesture control applications. [ABSTRACT FROM AUTHOR]

Electronic devices that can physically disappear in a controlled manner without harmful by‐products unveil a wide range of opportunities in medical devices, environmental monitoring, and next‐generation consumer electronics. Their property of transience is indispensable for mitigating the global problem of electronic waste accumulation. Additionally, transient technologies that are biocompatible and can be biologically resorbed are of great potential for applications in temporary medical implants, since it eliminates the need for expensive device recovery surgery. Transistors are the key building blocks of modern electronics, and their fabrication using organic materials is beneficial due to their low cost, unprecedented flexibility and facile processing. This contribution reviews the technological application of biodegradable materials in four major classes of organic transistors, namely organic field‐effect transistors (OFETs), organic synaptic transistors, electrolyte‐gated OFETs, and organic electrochemical transistors. The fundamental biodegradation mechanism is discussed in detail, followed by a perspective of various biodegradable materials utilized as active semiconductors, dielectrics, electrolytes and substrates in the various types of organic transistor devices. This contribution comprehensively discusses the role and application of biodegradable materials in all of the key modern‐day organic transistors, highlighting their unique properties that allow the fabrication of biodegradable, eco‐friendly, and sustainable devices. [ABSTRACT FROM AUTHOR]

The development of organic electrochemical transistors (OECTs) capable of maintaining their high amplification, fast transient speed, and operational stability in harsh environments will advance the growth of next‐generation wearable and biological electronics. In this study, a high‐performance solid‐state OECT (SSOECT) is successfully demonstrated, showing a recorded high transconductance of 220 ± 59 S cm−1, ultrafast device speed of ≈10 kHz with excellent operational stability over 10 000 switching cycles, and thermally stable under a wide temperature range from −50 to 110 °C. The developed SSOECTs are successfully used to detect low‐amplitude physiological signals, showing a high signal‐to‐noise‐ratio of 32.5 ± 2.1 dB. For the first time, the amplifying power of these SSOECTs is also retained and reliably shown to collect high‐quality electrophysiological signals even under harsh temperatures (−50 and 110 °C). The demonstration of high‐performing SSOECTs and its application in harsh environment are core steps toward their implementation in next‐generation wearable electronics and bioelectronics. [ABSTRACT FROM AUTHOR]

Recently emerged on‐skin electronics with applications in human–machine interfaces and on‐body healthy monitoring call for the development of high‐performance skin‐like electrodes and semiconducting polymers. The development of waterproof and breathable membranes that can provide a high level of protection for human skins and a comfortable contact between electronics and skin are the pressing demands for on‐skin electronics. However, major challenges remain, such as the limited mechanical durability and permeability of gas and liquid, hindering long‐term stability and reusability. Herein, a fibrous electrolyte containing polymer matrix and ionic liquid, which is highly robust, breathable, waterproof, and conformal with human skin is reported. Serving as fibrous substrate and electrolyte of organic electrochemical transistors (OECTs), a high transconductance of ≈0.8 mS, stability over pulsing and time (≈1000 cycles and 30 days) are achieved. The softness of fibrous OECTs enables a comfortable contact after attaching to human skin, which can reduce the interfacial impedance to achieve a high‐quality local amplification of the electrocardiography signals (signal‐to‐noise ratio of 21.7 dB) even in skin squeezed state or after one week. These results indicated that our fibrous OECTs have huge potential for versatile on‐skin electronics such as non‐invasive medical monitoring, soft sensors, and textile electronics. [ABSTRACT FROM AUTHOR]