Search

In the frame of a systematic study on the sequestering ability of natural antioxidants towards metal cations, here the complexation of coumarin-3-carboxilic acid (HCCA) with Pb(II) and the overall stability constants of the resulting complexes, at 37 °C and in 0.16 M NaClO4, are discussed. Reaction of Pb(ClO4)2 with HCCA in an aqueous medium at a pH range from 2 to 6 and various ratios (1:1–1:10) yielded the Pb–CCA complexes, which were characterized spectrometrically by laser desorption ionization mass spectrometry (LD-MS). LD-MS has provided the composition and structure of Pb–CCA species according to the speciation model proposed on the basis of the potentiometric data. The graphic representation of the complex's concentration curves is given by the distribution diagram, which provides a whole depiction of the species present in the solution at the selected pH ranges. [ABSTRACT FROM AUTHOR]

Herein we present a textile wearable electrochemical transistor by functionalizing a single cotton yarn with semiconducting polymer. The organic electrochemical transistor (OECT), which is low cost and completely integrated e-textile, is decorated by adsorption of the fungal laccase POXA1b, and is used as biosensor for the direct detection of Tyrosine (L-Tyr) without the use of electron mediators. The detection of Tyr in real-case scenario such as human physiological fluids would own a paramount importance in noninvasive analysis of the patient's condition, monitoring and preventing several pathologies. To assess the reaction progression, the redox process is studied by UV–visible absorption with test reference molecule of 2,2′-azinobis(3-ethylbenzothiazoline-6-sulfonate) (ABTS): the results confirmed that the oxidation reaction is driven by the presence of laccase enzyme and direct electron transfer occurred. The modulation of the signal response and the kinetic of the signal is used to detect Tyr molecule in aqueous solution and the role of the enzyme adsorption on the textile is analyzed. A kinetic analysis of the characteristic modulation times of the sensing curves, confirm the sensing properties of the textile device. The textile-based biosensor is demonstrated to monitor human health biomarkers through wearable applications in a non-invasive way, finding potential application in sport, healthcare and working safety. [ABSTRACT FROM AUTHOR]

The clarification step represents, in fruit juices industries, a bottleneck process because residual phenols cause severe haze formation affecting juice quality and impairing customers acceptance. An enzymatic step can be efficiently integrated in the process, and use of immobilized enzymes entails an economical advantage. In this work, covalent immobilization of recombinant POXA1b laccase from Pleurotus ostreatus on epoxy activated poly(methacrylate) beads was optimized thanks to a Response Surface Methodologies approach. Through regression analysis the process was well fitted by a quadratic polynomial equation ( R 2 = 0.9367, adjusted R 2 = 0.8226) under which laccase activity reached 2000 ± 100 U g −1 of beads, with an immobilization efficiency of 98%. The immobilized biocatalyst was characterized and then tested in fruit juice clarification reaching up to 45% phenol reduction, without affecting health-effective flavanones content. Furthermore, laccase treated juice displays an improved sensory profile, due to the reduction of vinyl guaiacol, a potent off-flavor possessing a peppery/spicy aroma. [ABSTRACT FROM AUTHOR]

Cells activate signalling through ligand-receptor bonds by sensing the mechanical properties of the surrounding extracellular matrix (ECM). Ligands, indeed, have to withstand the pulling force elicited by cell receptors through focal adhesions (FAs). On this basis, we developed functional ligands to be simply adsorbed on surfaces and constituted by a two-domain peptide: one derived from ECM proteins and available to receptors to offer biochemical cues, and another adsorbed on material to withstand the tension upon receptor engagement. Tuneable compliance of the anchoring domain of the peptide ligand was verified by single peptide analysis through molecular dynamics and adsorption measurements. We showed that the highest adsorbed peptides combined with integrin cell-binding motifs allow for the cell recognition and polarization with larger mature FA areas. On the contrary, the lowest adsorbed sequences did not provide mechanical resistance to the integrin pulling action, leading to more rounded cells with smaller FA areas. This evidence demonstrates that cell mechanosensory can discriminate ligands on surfaces and should be considered as a criterion in ligand design for material bioactivation. [ABSTRACT FROM AUTHOR]

Fungal laccases ( p-diphenol:oxygen oxidoreductase; EC 1.10.3.2) are multi-copper-containing oxidases that catalyse the oxidation of a great variety of phenolic compounds and aromatic amines through simultaneous reduction of molecular oxygen to water. Fungi generally produce several laccase isoenzymes encoded by complex multi-gene families. The Pleurotus ostreatus genome encodes 11 putative laccase coding genes, and only six different laccase isoenzymes have been isolated and characterised so far. Laccase expression was found to be regulated by culture conditions and developmental stages even if the redundancy of these genes still raises the question about their respective functions in vivo. In this context, laccase transcript profiling analysis has been used to unravel the physiological role played by the different isoforms produced by P. ostreatus. Even if reported results depict a complex picture of the transcriptional responses exhibited by the analysed laccase genes, they were allowed to speculate on the isoform role in vivo. Among the produced laccases, LACC10 (POXC) seems to play a major role during vegetative growth, since its transcription is downregulated when the fungus starts the fructification process. Furthermore, a new tessera has been added to the puzzling mosaic of the heterodimeric laccase LACC2 (POXA3). LACC2 small subunit seems to play an additional physiological role during fructification, beside that of LACC2 complex activation/stabilisation. [ABSTRACT FROM AUTHOR]

White-rot basidiomycetes, the most common wood-rotting organisms, are characterized by their ability to produce extracellular oxidative enzymes, among which laccases are regarded as promising catalysts for many biotechnological applications. A significant obstacle to the exploitation of laccase-based bioprocesses is the large amounts of enzyme required. In this study the issue has been addressed by applying a classical breeding approach to increase laccase production yields in the white-rot fungus Pleurotus ostreatus. Starting from two different P. ostreatus varieties, three higher laccase-producing hybrids have been obtained by crossing selected compatible monokaryons. The three selected strains increased the titre of parental strains up to four fold, reaching an expression level of up to 100 000 U/L. One hybrid exhibited a more complex isoenzyme pattern, illustrating the potential of classical breeding to differentiate protein expression. [ABSTRACT FROM AUTHOR]

Abstract: The ever-increasing demand of laccases for biodelignification, industrial oxidative processes and environmental bioremediation requires the production of large quantities of enzymes at low cost. The present work was carried out to reduce laccase production costs in liquid fermentations of the white-rot fungus Pleurotus ostreatus through two different approaches. In the first, screening of fungal spent media as natural laccase inducer was performed, eliminating the presence of potentially toxic/recalcitrant and expensive exogenous inducers in the culture broth. In the latter, breeding of different strains of P. ostreatus, screened for their laccase productivity, was performed by cross-hybridisation, avoiding genetic transformation and mutagenic treatments that could produce organisms not suitable for “natural or safe processes”. A laccase production level close to 80,000U/L by combining the two approaches was achieved. Autoinduction and classical breeding represent promising tools for the improvement of fungal fermentation without affecting the disposable costs that also depend on the eco-compatibility of the whole process. [Copyright &y& Elsevier]

Abstract: Laccases (benzenediol:oxygen oxidoreductases, EC 1.10.3.2) are blue multicopper oxidases, catalyzing the oxidation of an array of aromatic substrates concomitantly with the reduction of molecular oxygen to water. Most of the known laccases have fungal or plant origins, although few laccases have been also identified in bacteria and insects. Most of the fungal laccases reported thus far are extra-cellular enzymes, whereas only few enzymes from fruiting bodies have been described so far. Multiple isoforms of laccases are usually secreted by each fungus depending on species and environmental conditions. As a fact, a laccase gene family has been demonstrated in the white-rot fungus Pleurotus ostreatus. This work allowed identification and characterization of the first laccase isoenzyme from the fruiting body of P. ostreatus. Discovery through mass spectrometry of LACC12 proves the expression of a functional protein by the related deduced encoding transcript. The topology of phylogenetic tree of fungal laccases proves that LACC12 falls in cluster with the members of P. ostreatus LACC10 (=POXC) subfamily, although lacc12 deduced intron–exon structure differs from that of the subfamily members and the related locus is located in a different chromosome. Results show that the evolutionary pattern of lacc12 and that of the other laccase isozyme genes may have evolved independently, possibly through duplication–divergence events. The reported data add a new piece to the knowledge about P. ostreatus laccase multigene family and shed light on the role(s) played by individual laccase isoforms in P. ostreatus. [Copyright &y& Elsevier]

Background: Beer is the most popular alcoholic beverage worldwide. In the manufacture of beer, various by-products and residues are generated, and the most abundant (85% of total by-products) are spent grains. Thanks to its high (hemi)cellulose content (about 50% w/w dry weight), this secondary raw material is attractive for the production of second-generation biofuels as butanol through fermentation processes. Results: This study reports the ability of two laccase preparations from Pleurotus ostreatus to delignify and detoxify milled brewer's spent grains (BSG). Up to 94% of phenols reduction was achieved. Moreover, thanks to the mild conditions of enzymatic pretreatment, the formation of other inhibitory compounds was avoided allowing to apply the sequential enzymatic pretreatment and hydrolysis process (no filtration and washing steps between the two phases). As expected, the high detoxification and delignification yields achieved by laccase pretreatment resulted in great saccharification. As a fact, no loss of carbohydrates was observed thanks to the novel sequential strategy, and thus the totality of polysaccharides was hydrolysed into fermentable sugars. The enzymatic hydrolysate was fermented to acetone-butanol-ethanol (ABE) by Clostridium acetobutilycum obtaining about 12.6 g/L ABE and 7.83 g/L butanol within 190 h. Conclusions: The applied sequential pretreatment and hydrolysis process resulted to be very effective for the milled BSG, allowing reduction of inhibitory compounds and lignin content with a consequent efficient saccharification. C. acetobutilycum was able to ferment the BSG hydrolysate with ABE yields similar to those obtained by using synthetic media. The proposed strategy reduces the amount of wastewater and the cost of the overall process. Based on the reported results, the potential production of butanol from the fermentation of BSG hydrolysate can be envisaged. [ABSTRACT FROM AUTHOR]

Modern biocatalysis requires fast, sensitive, and efficient high-throughput screening methods to screen enzyme libraries in order to seek out novel biocatalysts or enhanced variants for the production of chemicals. For instance, the synthesis of bio-based furan compounds like 2,5-diformylfuran (DFF) from 5-hydroxymethylfurfural (HMF) via aerobic oxidation is a crucial process in industrial chemistry. Laccases, known for their mild operating conditions, independence from cofactors, and versatility with various substrates, thanks to the use of chemical mediators, are appealing candidates for catalyzing HMF oxidation. Herein, Schiff-based polymers based on the coupling of DFF and 1,4-phenylenediamine (PPD) have been used in the set-up of a novel colorimetric assay for detecting the presence of DFF in different reaction mixtures. This method may be employed for the fast screening of enzymes (Z' values ranging from 0.68 to 0.72). The sensitivity of the method has been proved, and detection (8.4 μM) and quantification (25.5 μM) limits have been calculated. Notably, the assay displayed selectivity for DFF and enabled the measurement of kinetics in DFF production from HMF using three distinct laccase–mediator systems. [ABSTRACT FROM AUTHOR]

Human cytomegalovirus (hCMV) infection is the leading cause of birth defects in newborns and death in immunosuppressed people. Traditional techniques require time-consuming and costly analyses, and sometimes result in false positive results; thus, a rapid and accurate detection for hCMV infection is necessary. Recently, hcmv-miR-US4-5p was selected as the biomarker for cytomegalovirus diagnosis and follow-up. Herein, we propose a bioassay based on microgels endowed with optical fluorescent oligonucleotide probes for the detection of circulating endogenous hcmv-microRNAs. In particular, a double strand probe, based on the fluorescence recovery after target capture, was conjugated on microgels and the probe density was opportunely optimised. Then, the microgels were directly mixed with the sample. The fluorescence read-out was measured as a function of target concentration at a fixed number of microgels per tube. As a bead-based assay, the performances of optical detection in terms of dynamic working range and limit of detection could be finely tuned by tuning the number of microgels per tube. The limit of detection of the assay could be tuned in the range from 39.1 fM to 156 aM by changing the microgel concentration from 50 μg mL−1 to 0.5 μg mL−1, respectively. The assay results specific for the selected target were stable over a one-year time span and they were not affected by the presence of human serum. Therefore, this bioassay based on microgels might represent a flexible platform that should be able to predict, identify and follow-up several diseases by monitoring freely circulating oligonucleotides in body fluids. [ABSTRACT FROM AUTHOR]

Apple pomace, potato peels, and coffee silverskin are attractive agrofood wastes for the production of biofuels and chemicals, due to their abundance and carbohydrate content. As lignocellulosic biomasses, their conversion is challenged by the presence of lignin that prevents hydrolysis of polysaccharides, hence demanding a pretreatment step. In this work, the effectiveness of Pleurotus ostreatus laccases (with and without mediator) to remove lignin, improving the subsequent saccharification, was assessed. Optimized conditions for sequential protocol were set up for all agrofood wastes reaching delignification and detoxification yields correlated with high saccharification. Especially noteworthy were results for apple pomace and coffee silverskin for which 83% of and 73% saccharification yields were observed, by using laccase and laccase mediator system, respectively. The herein developed sequential protocol, saving soluble sugars and reducing the amount of wastewater, can improve the overall process for obtaining chemicals or fuels from agrofood wastes. [ABSTRACT FROM AUTHOR]

Peptide or protein ligands can be used for molecular decoration to enhance the functionality of synthetic materials. However, some skepticism has arisen about the efficacy of such strategy in practical contexts since serum proteins largely adsorb. To address this issue, it is crucial to ascertain whether a chemically conjugated integrin-binding peptide is fully recognized by a cell even if partially covered by a physisorbed layer of serum protein; in more general terms, if competitive protein fragments physisorbed onto the surface are distinguishable from those chemically anchored to it. Here, we engraft an RGD peptide on poly-ε-caprolactone (PCL) surfaces and follow the dynamics of focal adhesion (FA) and cytoskeleton assembly at different times and culture conditions using a variety of analytical tools. Although the presence of serum protein covers the bioconjugated RGD significantly, after the first adhesion phase cells dig into the physisorbed layer and reach the submerged signal to establish a more stable adhesion structure (mature FAs). Although the spreading area index is not substantially affected by the presence of the RGD peptide, cells attached to chemically bound signals develop a stronger adhesive interaction with the materials and assemble a mechanically stable cytoskeleton. This demonstrates that cells are able to discriminate, via mechanosensoring, between adhesive motives belonging to physisorbed proteins and those firmly anchored on the material surface. [ABSTRACT FROM AUTHOR]

Plants, including cocoa bean, are the main source of metabolites with multiple biological functions. Polyphenol extracts are widely used as a nutraceutical supplement for their well‐known health‐promoting role. In this paper, a preliminary untargeted metabolic screening was carried out by matrix‐assisted laser desorption/ionization (MALDI)‐time of flight (TOF)/TOF on a pool of chocolate samples made by cocoa beans of different geographical areas. Then, a targeted approach was developed for polyphenol quantification by an optimized Liquid chromatography (LC)–tandem mass spectrometry (MS/MS) method multiple reaction monitoring (MRM) ion mode. Detection limit of polyphenol standard ranged between 1 and 25 pg/μl with variation coefficient lower than 15%. External calibration curves were used for quantification of polyphenols in 18 samples. Fifty polyphenols were detected in a single LC–MRM/MS run and quantified by monitoring almost 90 transitions in a 5‐minute run. The polyphenols content of different cocoa beans from several countries was finally compared by principal component analysis (PCA) statistical analysis suggesting that the chocolate made by Ecuador cocoa beans showed the highest level of polyphenols. [ABSTRACT FROM AUTHOR]

Protein heterologous production offers viable opportunities to tailor laccase properties to specific industrial needs. The high redox potential laccase POXA1b from Pleurotus ostreatus was chosen as case study of marketable enzyme, due to its desirable properties in terms of activity/stability profile, and already assessed applicability. POXA1b was heterologously produced in Pichia pastoris by investigating the effect of inducible and constitutive expression systems on both the yield and the cost of its production. System performances were first assessed in shaken-flasks and then scaled-up in bioreactor. The production level obtained in the inducible system is 42 U/mL, while the activity value achieved with the constitutive one is 60 U/mL, the highest obtained in constitutive systems so far. The economic feasibility of recombinant laccase production was simulated, describing the case of an Italian small-medium enterprise. Two scenarios were evaluated: Scenario (I) production based on methanol inducible system; Scenario (II) production based on the constitutive system, fed with glycerol. At all the scales the glycerol-based fermentation is more economic than the methanol-based one. The price forecast for rPOXA1b production is 0.34 € k U −1 for glycerol-based process, and is very competitive with the current price of commercial laccase. [ABSTRACT FROM AUTHOR]