Search

Model Predictive Control (MPC) has proven to be a powerful tool for the control of systems with constraints. Nonetheless, in many applications, a major challenge arises, that is finding the optimal solution within a single sampling instant to apply a receding-horizon policy. In such cases, many suboptimal solutions have been proposed, among which the possibility of "blocking" some moves a-priori. In this paper, we propose a dynamic approach to move blocking, to exploit the solution already available at the previous iteration, and we show not only that such an approach preserves asymptotic stability, but also that the decrease of performance with respect to the ideal solution can be theoretically bounded., Comment: 7 pages

Equation-based modelling is a powerful approach to tame the complexity of large-scale simulation problems. Equation-based tools automatically translate models into imperative languages. When confronted with nowadays' problems, however, well assessed model translation techniques exhibit scalability issues, that are particularly severe when models contain very large arrays. In fact, such models can be made very compact by enclosing equations into looping constructs, but reflecting the same compactness into the translated imperative code is not trivial. In this paper, we face this issue by concentrating on a key step of equations-to-code translation, the equation/variable matching. We first show that an efficient translation of models with (large) arrays needs awareness of their presence, by defining a figure of merit to measure how much the looping constructs are preserved along the translation. We then show that the said figure of merit allows to define an optimal array-aware matching, and as our main result, that the so stated optimal array-aware matching problem is NP-complete. As an additional result, we propose a heuristic algorithm capable of performing array-aware matching in polynomial time. The proposed algorithm can be proficiently used by model translator developers in the implementation of efficient tools for large-scale system simulation.

Two established approaches to engineer adaptive systems are architecture-based adaptation that uses a Monitor-Analysis-Planning-Executing (MAPE) loop that reasons over architectural models (aka Knowledge) to make adaptation decisions, and control-based adaptation that relies on principles of control theory (CT) to realize adaptation. Recently, we also observe a rapidly growing interest in applying machine learning (ML) to support different adaptation mechanisms. While MAPE and CT have particular characteristics and strengths to be applied independently, in this paper, we are concerned with the question of how these approaches are related with one another and whether combining them and supporting them with ML can produce better adaptive systems. We motivate the combined use of different adaptation approaches using a scenario of a cloud-based enterprise system and illustrate the analysis when combining the different approaches. To conclude, we offer a set of open questions for further research in this interesting area., Comment: 7 pages

We present the TDMH (Time Deterministc Multi-Hop) protocol, a complete stack for real-time wireless mesh networks. TDMH offers to applications a connection-oriented, bounded-latency communication model. Point-to-point data streams can be created and destroyed at any time. Path redundancy can be optionally introduced to improve reliability. TDMH exploits state-of-the-art low power clock synchronisation and constructive interference flooding to build a continuously updated graph of the network topology, onto which a centralized scheduler maps data streams using TDMA channel access. We realised TDMH as a unitary codebase, that we ran on both the OMNeT++ simulator and WandStem wireless nodes. As a result we can state that when built atop the IEEE 802.15.4 physical layer, TDMH can scale up to 100 nodes, 10 hops and beyond, despite the limited available bandwidth.

Supporting real-time communications over Wireless networks (WSNs) is a tough challenge, due to packet collisions and the non-determinism of common channel access schemes like CSMA/CA. Real-time WSN communication is even more problematic in the general case of multi-hop mesh networks. For this reason, many real-time WSN solutions are limited to simple topologies, such as star networks. We propose a real-time multi-hop WSN MAC protocol built atop the IEEE 802.15.4 physical layer. By relying on precise clock synchronization and constructive interference-based flooding, the proposed MAC builds a centralized TDMA schedule, supporting multi-hop mesh networks. The real-time multi-hop communication model is connection-oriented, sing guaranteed time slots, and enables point-to-point communications also with redundant paths. The protocol has been implemented in simulation using OMNeT++, and the performance has been verified in a real-world deployment using Wandstem WSN nodes.

Clock synchronization is a necessary component in modern distributed systems, especially Wirless Sensor Networks (WSNs). Despite the great effort and the numerous improvements, the existing synchronization schemes do not yet address the cancellation of propagation delays. Up to a few years ago, this was not perceived as a problem, because the time-stamping precision was a more limiting factor for the accuracy achievable with a synchronization scheme. However, the recent introduction of efficient flooding schemes based on constructive interference has greatly improved the achievable accuracy, to the point where propagation delays can effectively become the main source of error. In this paper, we propose a method to estimate and compensate for the network propagation delays. Our proposal does not require to maintain a spanning tree of the network, and exploits constructive interference even to transmit packets whose content are slightly different. To show the validity of the approach, we implemented the propagation delay estimator on top of the FLOPSYNC-2 synchronization scheme. Experimental results prove the feasibility of measuring propagation delays using off-the-shelf microcontrollers and radio transceivers, and show how the proposed solution allows to achieve sub-microsecond clock synchronization even for networks where propagation delays are significant.

Accurate and energy-efficient clock synchronization is an enabler for many applications of Wireless Sensor Networks. A fine-grained synchronization is beneficial both at the system level, for example to favor deterministic radio protocols, and at the application level, when network-wide event timestamping is required. However, there is a tradeoff between the resolution of a WSN node's timekeeping device and its energy consumption. The Virtual High-resolution Timer (VHT) is an innovative solution, that was proposed to overcome this tradeoff. It combines a high-resolution oscillator to a low-power one, turning off the former when not needed. In this paper we improve VHT by first identifying the jitter of the low-power oscillator as the current limit to the technique, and then proposing an enhanced solution that synchronizes the fast and the slow clock, rejecting the said jitter. The improved VHT is also less demanding than the original technique in terms of hardware resources. Experimental results show the achieved advantages in terms of accuracy.

We study feedback control for discrete-time linear time-invariant systems in the presence of quantization both in the control action and in the measurement of the controlled variable. While in some application the quantization effects can be neglected, when high-precision control is needed, they have to be explicitly accounted for in control design. In this paper we propose a switched control solution for minimizing the effect of quantization of both the control and controlled variables in the case of a simple integrator with unitary delay, a model that is quite common in the computing systems domain, for example in thread scheduling, clock synchronization, and resource allocation. We show that the switched solution outperforms the one without switching, designed by neglecting quantization, and analyze necessary and sufficient conditions for the controlled system to exhibit periodic solutions in the presence of an additive constant disturbance affecting the control input. Simulation results provide evidence of the effectiveness of the approach., Comment: 12 pages, 14 figures

This paper presents a novel methodology to develop scheduling algorithms. The scheduling problem is phrased as a control problem, and control-theoretical techniques are used to design a scheduling algorithm that meets specific requirements. Unlike most approaches to feedback scheduling, where a controller integrates a "basic" scheduling algorithm and dynamically tunes its parameters and hence its performances, our methodology essentially reduces the design of a scheduling algorithm to the synthesis of a controller that closes the feedback loop. This approach allows the re-use of control-theoretical techniques to design efficient scheduling algorithms; it frames and solves the scheduling problem in a general setting; and it can naturally tackle certain peculiar requirements such as robustness and dynamic performance tuning. A few experiments demonstrate the feasibility of the approach on a real-time benchmark.