Search

In this research, a ternary Cu-CuTCPP/Cu2O/CoAl-LDH composite with a dual Z-scheme heterostructure was fabricated based on a Cu2O photocatalyst and applied in photocatalytic CO2 reduction. The physicochemical properties of the prepared catalysts and the possible reaction mechanism in CO2 reduction were analyzed and studied by various characterization methods. The activity of CO2 reduction significantly increased, especially forming C2 products. The optimal yield of C2H4 and C2H6 reached 1.56 and 1.92 μmol g−1 h−1 respectively, which was 14.45 and 17.45 times that from using the Cu2O monomer. In addition, the selectivity of C2 products reached 37.4%. The satisfactory C2 yield was mainly due to the fact that Cu1+δ2(COO)3 nodes in Cu-CuTCPP contained adjacent Cu sites, which effectively promoted the C–C coupling reaction. Moreover, the dual Z-scheme heterojunction stimulated the separation of photogenerated electron–hole pairs and diminished the recombination rate. This work contributes to the development of novel photocatalysts with a dual Z-scheme heterojunction and facilitates the generation of valuable C2 products. [ABSTRACT FROM AUTHOR]

The photocatalytic reduction of CO2 to hydrocarbons is expected to simultaneously alleviate the energy crisis and greenhouse effect. Herein, the ternary BiOCl/C/Cu2O catalysts with different mass ratios were compounded using a simple hydrothermal method, revealing better photocatalytic activity than the monomer. In the absence of sacrificial agents and photosensitizers, 25% BiOCl/C/Cu2O showed optimal photocatalytic performance. The CO and CH4 yields over 25% BiOCl/C/Cu2O reached 26.77 and 9.86 μmol g−1 h−1, which is 2.9 and 8.7 times higher than that of the pristine Cu2O, respectively. The ameliorative activity can be attributed to the construction of the Z-scheme heterostructure and carbon layer, which are conducive to the transfer and separation of photogenerated carriers. This study offers valuable references for the design and investigation of a Z-scheme heterojunction using a carbon layer as an electron transfer medium. [ABSTRACT FROM AUTHOR]

Interaction between steel cables and concrete is complicated in prestressed concrete bridges, especially in curved prestressed concrete bridges. The most significant behavior of curved beam bridges under the loads is that, at the same time of vertical flexure, torsion occurs on the cross section, which complicates the mechanical analysis to curved beam bridges. Based on coordinating relations of steel cables and concrete (CRSC), the grillage structure finite-element method was adopted to analyze the spatial effect of curved beam bridges. This way, the effect of all prestressing procedures can be simulated properly, including the prestressing loss due to concrete shrinkage and creep, batch prestressing of the cables, etc. Furthermore, it is effective to analyze the integrated behavior of the combined steel cables space out and concrete. The efficiency and reliability of the CRSC method is demonstrated by our analysis system WXQ2.0 developed for curved-skew bridges. [ABSTRACT FROM AUTHOR]

The photocatalytic reduction of CO2 to hydrocarbons is expected to simultaneously alleviate the energy crisis and greenhouse effect. Herein, the ternary BiOCl/C/Cu2O catalysts with different mass ratios were compounded using a simple hydrothermal method, revealing better photocatalytic activity than the monomer. In the absence of sacrificial agents and photosensitizers, 25% BiOCl/C/Cu2O showed optimal photocatalytic performance. The CO and CH4 yields over 25% BiOCl/C/Cu2O reached 26.77 and 9.86 μmol g−1 h−1, which is 2.9 and 8.7 times higher than that of the pristine Cu2O, respectively. The ameliorative activity can be attributed to the construction of the Z-scheme heterostructure and carbon layer, which are conducive to the transfer and separation of photogenerated carriers. This study offers valuable references for the design and investigation of a Z-scheme heterojunction using a carbon layer as an electron transfer medium. [ABSTRACT FROM AUTHOR]

Solar-energy-driven CO 2 hydrogenation is a promising strategy to alleviate the climate crisis. Methane is a desirable derivative of CO 2 reduction. However, developing a photocatalyst for highly active and selective CH 4 generation remains challenging. Herein, we report a double Z-scheme Bi 3 O 4 Cl/g-C 3 N 4 /Cd 0.5 Zn 0.5 S photocatalyst for efficient reduction of CO 2 to CH 4 . In situ characterization techniques confirmed that the charge migration mechanism in Bi 3 O 4 Cl/g-C 3 N 4 /Cd 0.5 Zn 0.5 S promotes charge separation through double internal electric fields. As a result, the optimized C0.01B0.02C catalyst displayed a formation rate high up to 25.34 μmol g -1 h -1 and a selectivity of 96.52% of CH 4 . Moreover, the AQY of CO 2 conversion on C0.01B0.02C (1.84%) was almost 41 times higher than that of the bare CN. This study provides a novel perspective to develop heterojunction photocatalysts for selective CO 2 conversion to CH 4 .

In this research, a ternary Cu-CuTCPP/Cu 2 O/CoAl-LDH composite with a dual Z-scheme heterostructure was fabricated based on a Cu 2 O photocatalyst and applied in photocatalytic CO 2 reduction. The physicochemical properties of the prepared catalysts and the possible reaction mechanism in CO 2 reduction were analyzed and studied by various characterization methods. The activity of CO 2 reduction significantly increased, especially forming C2 products. The optimal yield of C 2 H 4 and C 2 H 6 reached 1.56 and 1.92 μmol g -1 h -1 respectively, which was 14.45 and 17.45 times that from using the Cu 2 O monomer. In addition, the selectivity of C2 products reached 37.4%. The satisfactory C2 yield was mainly due to the fact that Cu 1+ δ 2 (COO) 3 nodes in Cu-CuTCPP contained adjacent Cu sites, which effectively promoted the C-C coupling reaction. Moreover, the dual Z-scheme heterojunction stimulated the separation of photogenerated electron-hole pairs and diminished the recombination rate. This work contributes to the development of novel photocatalysts with a dual Z-scheme heterojunction and facilitates the generation of valuable C2 products.

Ammonia selective catalytic reduction (NH 3 -SCR) of nitrogen oxides is an effective and well-established technology for NO x removal, but current commercial denitrification catalysts based on V 2 O 5 -WO 3 /TiO 2 have some obvious disadvantages, including narrow operating temperature windows, toxicity, poor hydrothermal stability, and unsatisfied SO 2 /H 2 O tolerance. To overcome these drawbacks, it is imperative to investigate new types of highly efficient catalysts. In order to design catalysts with outstanding selectivity, activity, and anti-poisoning ability, core-shell structured materials have been widely applied in the NH 3 -SCR reaction, which exhibits numerous advantages including the large surface area, the strong synergy interaction of core-shell materials, the confinement effect, and the shielding effect from the shell layer to protect the core. This review summarizes recent developments of core-shell structured catalysts for NH 3 -SCR, including basic classification, synthesis methods, and a detailed description of the performance and mechanisms of each type of catalyst. It is hoped that the review will stimulate future developments in NH 3 -SCR technology, leading to novel catalyst designs with improved denitrification performance., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier Ltd. All rights reserved.)

A photocatalytic system driven by solar light is one of the promising strategies for converting CO 2 into valuable energy. The reduction of CO 2 to CH 4 is widely studied since CH 4 has a high energy density as the main component of nonrenewable natural gas. Therefore, it is necessary to develop semiconductor materials with high photocatalytic activity and CH 4 selectivity. Graphitic carbon nitride (g-C 3 N 4 /CN) has attracted widespread attention for photocatalytic CO 2 reduction due to its excellent redox ability and visible light response. A hybrid system constructed by loading cocatalysts on g-C 3 N 4 can significantly improve the yield of target products, and serve as a general platform to explore the mechanism of the CO 2 reduction reaction. Herein, we briefly introduce the theory of selective CO 2 photoreduction and the basic properties of cocatalysts. Then, several typical configurations and modification strategies of cocatalyst/CN systems for promoting CH 4 selective production are presented in detail. In particular, we systematically summarize the application of cocatalyst/CN composite photocatalysts in the selective reduction of CO 2 to methane, according to the classification of cocatalysts (monometal, bimetal, metal-based compound, and nanocarbon materials). Finally, the challenges and perspectives for developing cocatalyst/g-C 3 N 4 systems with high CH 4 selectivity are presented to guide the rational design of catalysts with high performance in the future.

The photocatalytic reduction of CO 2 to hydrocarbons is expected to simultaneously alleviate the energy crisis and greenhouse effect. Herein, the ternary BiOCl/C/Cu 2 O catalysts with different mass ratios were compounded using a simple hydrothermal method, revealing better photocatalytic activity than the monomer. In the absence of sacrificial agents and photosensitizers, 25% BiOCl/C/Cu 2 O showed optimal photocatalytic performance. The CO and CH 4 yields over 25% BiOCl/C/Cu 2 O reached 26.77 and 9.86 μmol g -1 h -1 , which is 2.9 and 8.7 times higher than that of the pristine Cu 2 O, respectively. The ameliorative activity can be attributed to the construction of the Z-scheme heterostructure and carbon layer, which are conducive to the transfer and separation of photogenerated carriers. This study offers valuable references for the design and investigation of a Z-scheme heterojunction using a carbon layer as an electron transfer medium.