Search

This study primarily aims to investigate the influence of concrete interface properties on the anisotropic behavior of three-dimensional (3D) printed concrete (3DPC). A numerical model employing the traction-separation law was developed to capture the detailed behavior of concrete interfaces in 3DPC. To simulate the interfaces, zero-thickness cohesive elements were implemented. Experimental results indicate that horizontal shear deformation at the interfaces between printed layers reduces the compressive strength of 3D printed specimens. Additionally, the flexural strength of the 3D printed sample is mainly influenced by the tensile strength at the midspan. Specimens loaded in the Y- and Z-directions show relatively lower compressive strength but significantly higher flexural strength. Numerical analysis reveals that the number of interlayers and interstrips and shear properties contribute to changes in anisotropy when specimens are subjected to compression and flexure. Recommendations and influencing factors for improving the simulation modeling of 3DPC with anisotropic behavior have been proposed for future studies. [ABSTRACT FROM AUTHOR]

Novel mutations in myelin and myelin-associated genes have provided important information on oligodendrocytes and myelin and the effects of their disruption on the normal developmental process of myelination of the central nervous system (CNS). We report here a mutation in the folliculin-interacting protein 2 (FNIP2) gene in the Weimaraner dog that results in hypomyelination of the brain and a tract-specific myelin defect in the spinal cord. This myelination disruption results in a notable tremor syndrome from which affected dogs recover with time. In the peripheral tracts of the lateral and ventral columns of the spinal cord, there is a lack of mature oligodendrocytes. A genome-wide association study of DNA from three groups of dogs mapped the gene to canine chromosome 15. Sequencing of all the genes in the candidate region identified a frameshift mutation in the FNIP2 gene that segregated with the phenotype. While the functional role of FNIP2 is not known, our data would suggest that production of truncated protein results in a delay or failure of maturation of a subpopulation of oligodendrocytes.

With mandelic acid (MA) as the chiral core, two series of non-symmetric liquid crystal (LC) dimers have been synthesised by changing the rigidity of the side-arms, namely the DBM-nC2B series and the DBBM-nC2B series. In the DBM-nC2B series, one side-arm is the same, while the length of the flexible tail of the other side-arm increases from 0 to 4. The same is true of the DBBM-nC2B series. Chemical structures and LC properties of the two series LC dimers were characterised by FT-IR, 1H NMR, 13C NMR, DSC, TGA and POM. The results show that the DBM-nC2B series LC dimers display the nematic phase (N), and the DBBM-nC2B series LC dimers exhibit the chiral nematic phase (N*). It shows that the side-arm should have sufficient rigidity for MA to induce the N* phase. In the same series, when the length of the flexible tails of the side-arm increases from 0 to 4, it does not change the mesophase, while it has some effect on the melting temperature (Tm), the clearing temperature (TN(*)I), and mesophase range of the dimers. The molecular length-width ratio (l/w) and dipole moment (μ) were used to explain the variation of Tm and (TN(*)I) of LC dimer. [ABSTRACT FROM AUTHOR]

Two series of symmetric liquid crystal dimers, namely 1F and 3F, have been synthesised by varying the length of the flexible odd spacer. The melting temperatures and clear points of the 3F series are higher than those of the 1F series. The 1F series only exhibits nematic phase, while the 3F series displays both smectic A and nematic phases. As the length of the flexible spacer increases, the dominance of the smectic phase becomes more pronounced. This phenomenon may be attributed to the combined effect by the polar end group CF3 and the long flexible spacer on the molecular conformation. [ABSTRACT FROM AUTHOR]

A series of liquid crystal elastomer films (the PBC series) have been synthesized by grafting liquid crystal (LC) monomer 4-allyloxybenzoic acid cholesteryl ester (MB) and crosslinking agent [1,1'-biphenyl]-4,4'-diyl bis(undec-10-enoate) (MC) onto polymethylhydrosiloxane catalyzed by hexachloroplatinic acid at 60 °C. The PBC series are cholesteric liquid crystal elastomers (LCEs). The glass transition temperatures (Tg) of the PBC series are between 23-33 °C, and the LC range is above 200 °C. The temperatures of 5% weight loss of the PBC series are above 300 °C, which shows good thermal stability. The PBC series display good orientation. PB3C3 shows a good ability of shape recovery above Tg. [ABSTRACT FROM AUTHOR]