Search

In this paper, large eddy simulation (LES) was performed to investigate the shock wave/boundary layer interaction (SBLI) phenomenon in transonic compressor cascades with a chord Reynolds number of 2.12 × 106. A comprehensive analysis was conducted on both the SBLI structures inherent to the transonic compressor cascade and the coherent vortex structures within the boundary layer. The underlying mechanisms of the shock-induced boundary layer transition and the shock low-frequency unsteadiness in the transonic compressor cascade were elucidated through spectral and dynamic mode decomposition (DMD) analysis. The results revealed that boundary layer separation induced by the SBLI cannot reattach, leading to the formation of large-scale coherent vortex structures. Spectral analysis revealed that the shock-induced boundary layer transition in the transonic compressor cascade was dominated by inviscid Kelvin–Helmholtz (K–H) and secondary instability mechanisms, characterized by a dimensionless Strouhal number of 0.06. Additionally, pressure signals showed the variations in sub-frequency from the separated shear layer to the main flow. The oscillation amplitude of the shock foot was significantly greater than that of the shock main body, and the oscillation frequency of the shock foot was consistent with the sub-frequency. The oscillation frequency of the shock main body coincided with that of the compression ramp and flat plate configurations. Finally, DMD modal analysis indicated that high-frequency modes were correlated with turbulent fluctuations in the boundary layer, while medium- and low-frequency modes corresponded to shedding motion in the separated shear layer and low-frequency motion of the shock. This work promotes the understanding of the complex flow mechanisms of SBLI in the transonic compressor cascades. [ABSTRACT FROM AUTHOR]

The effects of back pressure on the transonic cascade operating state are crucial and can determine the structure of internal shock waves and secondary flows. In this paper, numerical methods validated by experiments were employed to investigate the evolution mechanisms of the inlet flow field, shock structure, secondary flow structure, and cascade performance under different back pressures. Analysis revealed that transonic cascade exhibited unique incidence characteristics in the inlet flow field under both subsonic and supersonic regimes, although these two regimes involved different physical mechanisms. The results revealed that the operating state of the transonic compressor cascade under the unique incidence condition was influenced by the outlet back pressure, and there existed a critical static pressure ratio. The critical static pressure ratio shifted from 1.61 for two-dimensional flow to 1.37 for three-dimensional (3D) flow at M1 = 1.1, due to the corner separation and the characteristics of 3D shocks. The 3D shock structure exhibited a non-uniform distribution along the spanwise direction due to the influence of back pressure and the separated boundary layer. The vortex structures analysis revealed that the secondary flow structure on the sidewalls of the transonic compressor cascade was primarily dominated by corner vortices, whose formation mechanism was related to the interaction between the shock wave and the sidewall boundary layer. Additionally, this interaction also led to the formation of detached shock and lip shock vortex structures. Finally, loss analysis indicated that the wake region of the transonic cascade primarily includes six types of loss, and the total loss of the cascade decreased with the rise in back pressure. [ABSTRACT FROM AUTHOR]