Search

The kagome metal FeSn, consists of alternating layers of kagome-lattice Fe3Sn and honeycomb Sn2, and exhibits great potential for applications in future low energy electronics and spintronics because of an ideal combination of novel topological phases and high-temperature magnetic ordering. Robust synthesis methods for ultra-thin FeSn films, as well as an understanding of their air stability is crucial for its development and long-term operation in future devices. In this work, we realize large area, sub-10 nm epitaxial FeSn thin films, and explore the oxidation process via synchrotron-based photoelectron spectroscopy using in-situ oxygen and water dosing, as well as ex-situ air exposure. Upon exposure to atmosphere the FeSn films are shown to be highly reactive, with a stable ~3 nm thick oxide layer forming at the surface within 10 minutes. Notably the surface Fe remains largely unoxidized when compared to Sn, which undergoes near-complete oxidation. This is further confirmed with controlled in-situ dosing of O2 and H2O where only the Sn2 (stanene) inter-layers within the FeSn lattice oxidize, suggesting the Fe3Sn kagome layers remain almost pristine. These results are in excellent agreement with first principles calculations, which show Fe-O bonds to the Fe3Sn layer are energetically unfavorable, and furthermore, a large formation energy preference of 1.37 eV for Sn-O bonds in the stanene Sn2 layer over Sn-O bonds in the kagome Fe3Sn layer. The demonstration that oxidation only occurs within the stanene layers may provide new avenues in how to engineer, handle and prepare future kagome metal devices., Comment: 21 pages, 5 figures, 4 SI figures

Topological insulators (TIs) are emergent materials with unique band structure, which allow the study of quantum effect in solids, as well as contribute to high performance quantum devices. To achieve the better performance of TI, here we present a co-doping strategy using synergistic rare-earth Sm and transition-metal Fe dopants in Bi2Se3 single crystals, which combine the advantages of both transition metal doped TI (high ferromagnetic ordering temperature and observed QAHE), and rare-earth doped TI (large magnetic moments and significant spin orbit coupling). In the as-grown single crystals, clear evidences of ferromagnetic ordering were observed. The angle resolve photoemission spectroscopy indicate the ferromagnetism opens a 44 meV band gap at surface Dirac point. Moreover, the carrier mobility at 3 K is ~ 7400 cm2/Vs, and we thus observed an ultra-strong Shubnikov-de Haas oscillation in the longitudinal resistivity, as well as the Hall steps in transverse resistivity below 14 T. Our transport and angular resolved photoemission spectroscopy results suggest that the rare-earth and transition metal co-doping in Bi2Se3 system is a promising avenue implement the quantum anomalous Hall effect, as well as harnessing the massive Dirac fermion in electrical devices., Comment: 5 figures

Topological insulators are emerging materials with insulating bulk and symmetry protected nontrivial surface states. One of the most fascinating transport behaviors in a topological insulator is the quantized anomalous Hall insulator, which has been observed inmagnetic-topological-insulator-based devices. In this work, we report a successful doping of rare earth element Tb into Bi$_{1.08}$Sb$_{0.9}$Te$_2$S topological insulator single crystals, in which the Tb moments are antiferromagnetically ordered below ~10 K. Benefiting from the in-bulk-gap Fermi level, transport behavior dominant by the topological surface states is observed below ~ 150 K. At low temperatures, strong Shubnikov-de Haas oscillations are observed, which exhibit 2D-like behavior. The topological insulator with long range magnetic ordering in rare earth doped Bi$_{1.08}$Sb$_{0.9}$Te$_2$S single crystal provides an ideal platform for quantum transport studies and potential applications., Comment: 15 pages, 3 figures

Quantum anomalous Hall (QAH) insulators transport charge without resistance along topologically protected chiral one-dimensional edge states. Yet, in magnetic topological insulators (MTI) to date, topological protection is far from robust, with the zero-magnetic field QAH effect only realised at temperatures an order of magnitude below the N\'eel temperature TN, though small magnetic fields can stabilize QAH effect. Understanding why topological protection breaks down is therefore essential to realising QAH effect at higher temperatures. Here we use a scanning tunnelling microscope to directly map the size of the exchange gap (Eg,ex) and its spatial fluctuation in the QAH insulator 5-layer MnBi$_2$Te$_4$. We observe long-range fluctuations of Eg,ex with values ranging between 0 (gapless) and 70 meV, uncorrelated to individual point defects. We directly image the breakdown of topological protection, showing that the chiral edge state, the hallmark signature of a QAH insulator, hybridizes with extended gapless metallic regions in the bulk. Finally, we unambiguously demonstrate that the gapless regions originate in magnetic disorder, by demonstrating that a small magnetic field restores Eg,ex in these regions, explaining the recovery of topological protection in magnetic fields. Our results indicate that overcoming magnetic disorder is key to exploiting the unique properties of QAH insulators.

Emergent quantum phenomena in two-dimensional van der Waal (vdW) magnets are largely governed by the interplay between the exchange and Coulomb interactions. The ability to tune the Coulomb interaction in such strongly correlated materials enables the precise control of spin-correlated flat-band states, bandgap (Eg) and unconventional magnetism, all of which are crucial for next-generation spintronics and magnonics applications. Here, we demonstrate a giant gate-tunable renormalization of spin-correlated flat-band states and bandgap in magnetic chromium tribromide (CrBr3) monolayers grown on graphene. Our gate-dependent scanning tunneling spectroscopy (STS) studies reveal that the inter-flat-band spacing and bandgap of CrBr3 can be continuously tuned by 120 meV and 240 meV respectively via electrostatic injection of carriers into the hybrid CrBr3/graphene system, equivalent to the modulation of the Cr on-site Coulomb repulsion energy by 500 meV. This can be attributed to the self-screening of CrBr3 arising from the gate-induced carriers injected into CrBr3, which dominates over the opposite trend from the remote screening of the graphene substrate. Precise tuning of the spin-correlated flat-band states and bandgap in 2D magnets via electrostatic modulation of Coulomb interactions not only provides new strategies for optimizing the spin transport channels but also may exert a crucial influence on the exchange energy and spin-wave gap, which could raise the critical temperature for magnetic order., Comment: 21 pages, 4 figures

Strain-induced pseudo magnetic fields offer the possibility of realizing zero magnetic field Quantum Hall effect in graphene, possibly up to room temperature, representing a promising avenue for lossless charge transport applications. Strain engineering on graphene has been achieved via random nanobubbles or artificial nanostructures on the substrate, but the highly localized and non-uniform pseudomagnetic fields can make spectroscopic probes of electronic structure difficult. Heterostructure engineering offers an alternative approach: By stacking graphene on top of another van der Waals material with large lattice mismatch at a desired twist angle, it is possible to generate large strain-induced pseudo magnetic fields uniformly over the entire heterostructure. Here, we report using nano-angle resolved photoemission spectroscopy (nano-ARPES) to probe the electronic bandstructure of a graphene/black phosphorus heterostructure (G/BP). By directly measuring the iso-energy contours of graphene and black phosphorus we determine a twist angle of 20-degrees in our heterostructure. High-resolution nano-ARPES of the graphene bands near the Fermi level reveals the emergence of flat bands located within the Dirac cone. The spacing of the flat bands is consistent with Landau level formation in graphene, and corresponds to a pseudo-field of 11.36 T. Our work provides a new way to study quantum Hall phases induced by strain in 2D materials and heterostructures.

Understanding the air-stability of MnBi$_2$Te$_4$ thin films is crucial for the development and long-term operation of electronic devices based around magnetic topological insulators. In the present work, we study MnBi$_2$Te$_4$ thin films upon exposure to atmosphere using a combination of synchrotron-based photoelectron spectroscopy, room temperature electrical transport and atomic force microscopy to determine the oxidation process. After 2 days air exposure a 2 nm thick oxide passivates the surface, corresponding to oxidation of only the top two surface layers, with the underlying layers preserved. This protective oxide layer results in samples that still exhibit metallic conduction even after several days air exposure. Furthermore, the work function decreases from 4.4 eV for pristine MnBi$_2$Te$_4$ to 4.0 eV after the formation of the oxide, along with only a small shift in the core levels indicating minimal doping as a result of air exposure. With the oxide confined to the top surface layers, and the underlying layers preserved, it may be possible to explore new avenues in how to handle, prepare and passivate future MnBi$_2$Te$_4$ devices.

Combining magnetism and nontrivial band topology gives rise to quantum anomalous Hall (QAH) insulators and exotic quantum phases such as the QAH effect where current flows without dissipation along quantized edge states. Inducing magnetic order in topological insulators via proximity to a magnetic material offers a promising pathway towards achieving QAH effect at high temperature for lossless transport applications. One promising architecture involves a sandwich structure comprising two single layers of MnBi2Te4 (a 2D ferromagnetic insulator) with ultra-thin Bi2Te3 in the middle, and is predicted to yield a robust QAH insulator phase with a bandgap well above thermal energy at room temperature (25 meV). Here we demonstrate the growth of a 1SL MnBi2Te4 / 4QL Bi2Te3 /1SL MnBi2Te4 heterostructure via molecular beam epitaxy, and probe the electronic structure using angle resolved photoelectron spectroscopy. We observe strong hexagonally warped massive Dirac Fermions and a bandgap of 75 meV. The magnetic origin of the gap is confirmed by the observation of broken time reversal symmetry and the exchange-Rashba effect, in excellent agreement with density functional theory calculations. These findings provide insights into magnetic proximity effects in topological insulators, that will move lossless transport in topological insulators towards higher temperature., Comment: 24 pages

With its monoelemental composition, various crystalline forms and an inherently strong spin-orbit coupling, bismuth has been regarded as an ideal prototype material to expand our understanding of topological electronic structures. In particular, two-dimensional bismuth thin films have attracted a growing interest due to potential applications in topological transistors and spintronics. This calls for an effective physical model to give an accurate interpretation of the novel topological phenomena shown by two-dimensional bismuth. However, the conventional semi-empirical approach of adapting bulk bismuth hoppings fails to capture the topological features of two-dimensional bismuth allotropes because the electronic band topology is heavily influenced by crystalline symmetries as well as atom spacings. Here we provide a new parameterization using localized Wannier functions derived from the Bloch states in first-principles calculations. We construct new tight-binding models for three types of two-dimensional bismuth allotropes: a Bi (111) bilayer, bismuthene and a Bi(110) bilayer. We demonstrate that our tight-binding models can successfully reproduce the band structures, symmetries and topological features of these two-dimensional allotropes. We anticipate that these models can be extended to other similar two-dimensional topological structures such as antimonene and arsenene. Moreover, these models can serve as a starting point for investigating the electron/spin transport and electromagnetic response in low-dimensional topological devices., Comment: 20 pages, 6 figures

Intrinsic magnetic topological insulators offer low disorder and large magnetic bandgaps for robust magnetic topological phases operating at higher temperatures. By controlling the layer thickness, emergent phenomena such as the Quantum Anomalous Hall (QAH) effect and axion insulator phases have been realised. These observations occur at temperatures significantly lower than the Neel temperature of bulk MnBi2Te4, and measurement of the magnetic energy gap at the Dirac point in ultra-thin MnBi2Te4 has yet to be achieved. Critical to achieving the promise of this system is a direct measurement of the layer-dependent energy gap and verifying whether the gap is magnetic in the QAH phase. Here we utilise temperature dependent angle-resolved photoemission spectroscopy to study epitaxial ultra-thin MnBi2Te4. We directly observe a layer dependent crossover from a 2D ferromagnetic insulator with a bandgap greater than 780 meV in one septuple layer (1 SL) to a QAH insulator with a large energy gap (>100 meV) at 8 K in 3 and 5 SL MnBi2Te4. The QAH gap is confirmed to be magnetic in origin, as it abruptly diminishes with increasing temperature above 8 K. The direct observation of a large magnetic energy gap in the QAH phase of few-SL MnBi2Te4 is promising for further increasing the operating temperature of QAH materials.