Search

Peptide materials have a wide array of functions, from tissue engineering and surface coatings to catalysis and sensing. Tuning the sequence of amino acids that comprise the peptide modulates peptide functionality, but a small increase in sequence length leads to a dramatic increase in the number of peptide candidates. Traditionally, peptide design is guided by human expertise and intuition and typically yields fewer than ten peptides per study, but these approaches are not easily scalable and are susceptible to human bias. Here we introduce a machine learning workflow-AI-expert-that combines Monte Carlo tree search and random forest with molecular dynamics simulations to develop a fully autonomous computational search engine to discover peptide sequences with high potential for self-assembly. We demonstrate the efficacy of the AI-expert to efficiently search large spaces of tripeptides and pentapeptides. The predictability of AI-expert performs on par or better than our human experts and suggests several non-intuitive sequences with high self-assembly propensity, outlining its potential to overcome human bias and accelerate peptide discovery.

Supramolecular peptide chemistry offers a versatile strategy to create chemical systems useful as new biomaterials with potential to deliver nearly 1000 known candidate peptide therapeutics or integrate other types of bioactivity. We report here on the co-assembly of lipidated β-sheet-forming peptides with soluble short peptides, yielding

Supramolecular-covalent hybrid spiropyran hydrogels are developed to generate robotic functions in response to light. The morphology of supramolecular phases is found to play a critical role in mechanical photo-actuation of these hybrid hydrogels.

Pathways in supramolecular polymerization traverse different regions of the system's energy landscape, affecting not only their architectures and internal structure but also their functions. We report here on the effects of pathway selection on polymerization for two isomeric peptide amphiphile monomers with amino acid sequences AAEE and AEAE. We subjected the monomers to five different pathways that varied in the order they were exposed to electrostatic screening by electrolytes and thermal annealing. We found that introducing electrostatic screening of E residues before annealing led to crystalline packing of AAEE monomers. Electrostatic screening decreased intermolecular repulsion among AAEE monomers thus promoting internal order within the supramolecular polymers, while subsequent annealing brought them closer to thermodynamic equilibrium with enhanced β-sheet secondary structure. In contrast, supramolecular polymerization of AEAE monomers was less pathway dependent, which we attribute to side-chain dimerization. Regardless of the pathway, the internal structure of AEAE nanostructures had limited internal order and moderate β-sheet structure. These supramolecular polymers generated hydrogels with lower porosity and greater bulk mechanical strength than those formed by the more cohesive AAEE polymers. The combination of dynamic, less ordered internal structure and bulk strength of AEAE networks promoted strong cell-material interactions in adherent epithelial-like cells, evidenced by increased cytoskeletal remodeling and cell spreading. The highly ordered AAEE nanostructures formed porous hydrogels with inferior bulk mechanical properties and weaker cell-material interactions. We conclude that pathway sensitivity in supramolecular synthesis, and therefore structure and function, is highly dependent on the nature of dominant interactions driving polymerization.

The control of morphology in bioinspired chromophore assemblies is key to the rational design of functional materials for light harvesting. We investigate here morphological changes in perylene monoimide chromophore assemblies during thermal annealing in aqueous environments of high ionic strength to screen electrostatic repulsion. We found that annealing under these conditions leads to the growth of extra-large ribbon-shaped crystalline supramolecular polymers of widths from about 100 nm to several micrometers and lengths from 1 to 10 μm while still maintaining a unimolecular thickness. This growth process was monitored by variable-temperature absorbance spectroscopy, synchrotron X-ray scattering, and confocal microscopy. The extra-large single-crystal-like supramolecular polymers are highly porogenic, thus creating loosely packed hydrogel scaffolds that showed greatly enhanced photocatalytic hydrogen production with turnover numbers as high as 13 500 over ∼110 h compared to 7500 when smaller polymers are used. Our results indicate great functional opportunities in thermally and pathway-controlled supramolecular polymerization.

Summary Development of stimuli-responsive soft matter that undergoes fast and reversible shape changes that mimic living organisms is a grand challenge for materials science. We report here on the molecular design of photoactive bilayer actuators that can rapidly respond to visible light, leading to complex but predictable bio-inspired shape changes. The mechanism of accelerated actuation is rooted in the simultaneous photoexpansion of one layer and photocontraction of the other triggered by the same light stimulus. The opposing response leads to a synergistic effect that results in fast bending actuation. The synergistic bilayers were bridged with light-inactive segments to generate macroscopic constructs capable of undergoing programmable 3D origami-like shape change upon irradiation. By controlling the anisotropic friction with the substrate, these constructs displayed unidirectional inchworm- and octopus-like locomotion over macroscopic distances. The soft matter systems investigated here demonstrate the possibility of molecularly engineering photoactuators that mimic functions we associate with living organisms.

Supramolecular self-assembly enables living organisms to form highly functional hierarchical structures with individual components self-organized across multiple length scales. This has inspired work on multicomponent supramolecular materials to understand factors behind co-assembly versus self-sorting of molecules. We report here on a supramolecular system comprised of negatively charged peptide amphiphile (PA) molecules, in which only a tiny fraction of the molecules (0.7 mol %) were covalently conjugated to one of two different fluorophores, half to fluorescein isothiocyanate (FTIC) and the other half to tetramethylrhodamine (TAMRA). Confocal microscopy of the system revealed self-sorting of the two different fluorescent PA molecules, where TAMRA PA is concentrated in micron-scale domains while FITC PA remains dispersed throughout the sample. From Förster resonance energy transfer and fluorescence recovery experiments, we conclude that conjugation of the negatively charged FITC to PA significantly disrupts its co-assembly with the 99.3 mol % of unlabeled molecules, which are responsible for formation of micron-scale domains. Conversely, conjugation of the zwitterionic TAMRA causes no such disruption. Interestingly, this dissimilar behavior between FITC and TAMRA PA causes them to self-sort at large length scales in the supramolecular system, mediated not by specific interactions among the individual fluorophores but instead by their different propensities to co-assemble with the majority component. We also found that greater ionic strength in the aqueous environment of the system promotes mixing by lowering the electrostatic barriers involved in self-sorting. Our results demonstrate great thermodynamic subtlety in the driving forces that mediate self-sorting versus co-assembly in supramolecular peptide assemblies.

Hierarchical self-assembly leading to organized supramolecular structures across multiple length scales has been of great recent interest. Earlier work from our laboratory reported the complexation of peptide amphiphile (PA) supramolecular polymers with oppositely charged polyelectrolytes into a single solid membrane at a macroscopic interface. We report here the formation of bulk gels with many internal interfaces between the covalent and supramolecular polymer components formed by the rapid chaotic mixing of solutions, one containing negatively charged PA nanofibers and the other the positively charged biopolymer chitosan. We found that formation of a contact layer at the interface of the solutions locks the formation of hydrogels with lamellar microstructure. The nanofiber morphology of the supramolecular polymer is essential to this process since gels do not form when solutions of supramolecular assemblies form spherical micelles. We found that rheological properties of the gels can be tuned by changing the relative amounts of each component. Furthermore, both positively and negatively charged proteins are easily encapsulated within the contact layer of the gel, which provides an interesting biomedical function for these systems.

The development of synthetic structures that mimic mechanical actuation in living matter such as autonomous translation and shape changes remains a grand challenge for materials science. In living systems the integration of supramolecular structures and covalent polymers contributes to the responsive behaviour of membranes, muscles and tendons, among others. Here we describe hybrid light-responsive soft materials composed of peptide amphiphile supramolecular polymers chemically bonded to spiropyran-based networks that expel water in response to visible light. The supramolecular polymers form a reversibly deformable and water-draining skeleton that mechanically reinforces the hybrid and can also be aligned by printing methods. The noncovalent skeleton embedded in the network thus enables faster bending and flattening actuation of objects, as well as longer steps during the light-driven crawling motion of macroscopic films. Our work suggests that hybrid bonding polymers, which integrate supramolecular assemblies and covalent networks, offer strategies for the bottom-up design of soft matter that mimics living organisms. Peptide amphiphile supramolecular polymers with a crosslinked spiropyran network respond to light by expelling water, enabling the fabrication of soft actuators or light-driven crawlers.

Non-compressible torso hemorrhage accounts for a significant portion of preventable trauma deaths. We report here on the development of injectable, targeted supramolecular nanotherapeutics based on peptide amphiphile (PA) molecules that are designed to target tissue factor (TF) and, therefore, selectively localize to sites of injury to slow hemorrhage. Eight TF-targeting sequences were identified, synthesized into PA molecules, co-assembled with non-targeted backbone PA at various weight percentages, and characterized via circular dichroism spectroscopy, transmission electron microscopy, and X-ray scattering. Following intravenous injection in a rat liver hemorrhage model, two of these PA nanofiber co-assemblies exhibited the most specific localization to the site of injury compared to controls (p

The incorporation of molecular switches in organic structures is of great interest in the chemical design of stimuli-responsive materials that mimic the complex functions of living systems. Merocyanine dyes that convert to spiropyran moieties upon exposure to visible light have been extensively studied as they can be incorporated in hydrated covalent networks that will expel water when this conversion occurs and induce a volumetric shrinkage. We report here on a sulfonate-based water-soluble photoswitch that, in contrast to the well-known systems, triggers a volumetric expansion in hydrogels upon exposure to photons. Contraction is in turn observed under dark conditions in a highly reversible manner. The novel behavior of the photoswitch incorporated in the covalent network was predicted by coarse-grained simulations of the system's chemical structure. Using pH control and polymeric structures that differ in lower critical solution temperature, we were able to develop hydrogels with highly tunable volumetric expansion. The novel molecular function of the systems developed here led to materials with the negative phototaxis observed in plants and could expand the potential use of hydrogels as sensors, soft robots, and actuators.

Hybrid systems based on covalent polymers and supramolecular assemblies offer unique opportunities for functional materials based on the pathway-dependent dynamic structures of supramolecular assemblies and the mechanical stability of covalent polymers. We report here on the synthesis of functional hybrid hydrogels containing self-assembling chromophore amphiphiles and polyelectrolytes. Chromophore amphiphiles were introduced into non-aqueous solvent swollen polymer matrices and self-assembly of the chromophore amphiphiles into crystalline nanostructures was triggered in the confined environment of the covalent network upon solvent exchange for water. Opposite charges in the covalent polyelectrolyte and the chromophore amphiphiles and sterics entrap the supramolecular assemblies within the mechanically stable network. However, molecular components necessary for catalysis, byproducts from photocatalysis, and the hydrogen produced are able to diffuse in or out of the covalent network to create a reusable robust host for photocatalysis. By varying the monomer and crosslinker composition in the feed, we can tune the porosity of the network as well as the chemical environment in which supramolecular crystallization of the chromophore amphiphiles takes place. This allows optimization of the hydrogel mechanical properties, retention of the chromophore amphiphile assemblies, and the photocatalytic reaction efficiency. Coarse-grained molecular dynamics simulations revealed that the chromophore amphiphile assembly is guided by the polyelectrolyte network via ionic interactions. We also demonstrate successful photocatalytic hydrogen production from catalyst-laden hybrid hydrogels with the turnover frequency approaching that of the supramolecular hydrogel system, and also show that the hybrid hydrogels can be reused over multiple cycles as photosensitizers.

Many peptides are able to self-assemble into one-dimensional (1D) nanostructures, such as cylindrical fibers or ribbons of variable widths, but the relationship between the morphology of 1D objects and their molecular structure is not well understood. Here, we use coarse-grained molecular dynamics (CG-MD) simulations to study the nanostructures formed by self-assembly of different peptide amphiphiles (PAs). The results show that ribbons are hierarchical superstructures formed by laterally assembled cylindrical fibers. Simulations starting from bilayer structures demonstrate the formation of filaments, whereas other simulations starting from filaments indicate varying degrees of interaction among them depending on chemical structure. These interactions are verified by observations using atomic force microscopy of the various systems. The interfilament interactions are predicted to be strongest in supramolecular assemblies that display hydrophilic groups on their surfaces, while those with hydrophobic ones are predicted to interact more weakly as confirmed by viscosity measurements. The simulations also suggest that peptide amphiphiles with hydrophobic termini bend to reduce their interfacial energy with water, which may explain why these systems do not collapse into superstructures of bundled filaments. The simulations suggest that future experiments will need to address mechanistic questions about the self-assembly of these systems into hierarchical structures, namely, the preformation of interactive filaments vs equilibration of large assemblies into superstructures.

The morphology of supramolecular peptide nanostructures is difficult to predict given their complex energy landscapes. We investigated peptide amphiphiles containing β-sheet forming domains that form twisted nanoribbons in water. We explained the morphology based on a balance between the energetically favorable packing of molecules in the center of the nanostructures, the unfavorable packing at the edges, and the deformations due to packing of twisted β-sheets. We find that morphological polydispersity of PA nanostructures is determined by peptide sequences, and the twisting of their internal β-sheets. We also observed a change in the supramolecular chirality of the nanostructures as the peptide sequence was modified, although only amino acids with l-configuration were used. Upon increasing charge repulsion between molecules, we observed a change in morphology to long cylinders and then rodlike fragments and spherical micelles. Understanding the self-assembly mechanisms of peptide amphiphiles into nanostructures should be useful to optimize their well-known functions.

Peptide materials have a wide array of functions from tissue engineering, surface coatings to catalysis and sensing. This class of biopolymer is composed of a sequence, comprised of 20 naturally occurring amino acids whose arrangement dictate the peptide functionality. While it is highly desirable to tailor the amino acid sequence, a small increase in their sequence length leads to dramatic increase in the possible candidates (e.g., from tripeptide = 20^3 or 8,000 peptides to a pentapeptide = 20^5 or 3.2 M). Traditionally, peptide design is guided by the use of structural propensity tables, hydrophobicity scales, or other desired properties and typically yields

Adding polymers to methylammonium lead iodide perovskite solar cell active layers has been previously shown to increase their chemical stability, but stabilization mechanisms in these hybrid materials are poorly understood. We report here on a structural and spectroscopic analysis in a number of perovskite–polymer hybrid materials and compare their stability. We observed that perovskite crystallite sizes decrease with the addition of polymers (polyethylene glycol, polyethyleneimine, poly(acrylic acid) and polyvinylpyrrolidone), and through the use of nanomechanical AFM showed phase contrast in the perovskite–polymer mixture. NMR and single-crystal growth experiments reveal that acid–base interactions, as well as facet-dependent interfacial interactions between perovskite and polymer, contribute to differences in stabilities of these hybrid materials. The polymers investigated tend to suppress the formation of a hydrate crystal phase that accelerates the degradation reaction, and we report that adding poly(acrylic acid) increases significantly the stability of perovskite films under humid air and ambient illumination. Under these controlled degradation conditions, perovskite–poly(acrylic acid) hybrid solar cells maintain stable efficiency for the first 3 days and then slowly degrade over the next 6 days under humid air and illumination, whereas control perovskite solar cells degrade entirely within the first 2 days. These results highlight the importance of choosing suitable functional groups in the polymer phase of perovskite hybrid solar cells to prolong their device lifetime.

Hierarchical self-assembly leading to organized supramolecular structures across multiple length scales has been of great recent interest. Earlier work from our laboratory reported the complexation of peptide amphiphile (PA) supramolecular polymers with oppositely charged polyelectrolytes into a single solid membrane at a macroscopic interface. We report here the formation of bulk gels with many internal interfaces between the covalent and supramolecular polymer components formed by the rapid chaotic mixing of solutions, one containing negatively charged PA nanofibers and the other the positively charged biopolymer chitosan. We found that formation of a contact layer at the interface of the solutions locks the formation of hydrogels with lamellar microstructure. The nanofiber morphology of the supramolecular polymer is essential to this process since gels do not form when solutions of supramolecular assemblies form spherical micelles. We found that rheological properties of the gels can be tuned by changing the relative amounts of each component. Furthermore, both positively and negatively charged proteins are easily encapsulated within the contact layer of the gel, which provides an interesting biomedical function for these systems.

Supramolecular biomaterials are promising systems to bind or deliver therapeutic growth factors given their great structural versatility and tunability of properties by simply mixing molecules. In this work, we have investigated this approach for the growth factor cytokine TGFβ-1, which is potentially important in the regeneration of damaged cartilage or in the prevention of fibrinogenesis of organs and the progression of tumors. Our previous work identified a peptide sequence capable of binding TGFβ-1 and supramolecular peptide amphiphile (PA) nanofiber hydrogels that displayed the sequence were found to enhance regeneration of cartilage in a rabbit model. In this work, we have synthesized novel PA molecules motivated by the tendency of the original bioactive peptide to undergo deamidation during purification procedures, thus interfering with synthesis of molecularly well-defined structures. We report here on novel PA nanofibers that can be purified without deamidation to establish if the chemical reaction affects chondrogenesis. Interestingly, we found that gels formed from nanofibers displaying a fully deamidated sequence by introducing an asparagine to aspartic acid mutation retain 25% more growth factor relative to those displaying the original bioactive peptide even though the individual peptides have similar affinity for the cytokine. We attribute this difference in growth factor retention to bundling of nanofibers displaying the original asparagine-containing sequence, thus masking the growth factor-binding structure. Improved retention of the growth factor resulted in chondrogenesis of cells encapsulated in the gels as indicated by a more than 50% increase in Sox 9 expressing cells at 3 days and a 100% increase in glycosaminoglycan production at 21 days. We have therefore been able to design a more effective bioactive supramolecular biomaterial to bind TGFβ-1, and also demonstrated how bioactive peptide sequences in supramolecular biomaterials can have impact on their structure at larger length scales that change their biological functions.

On the basis of the exclusive existence of homochirality in biomolecules and the well-known phenomenon of chiral recognition, it is obvious that chirality is a crucial factor in biological events. We report here that supramolecular assemblies of peptide amphiphiles interact with lipid bilayer membranes in a stereospecific manner. When negatively charged chiral phospholipid bilayer vesicles were subjected to the assemblies, we found that peptide amphiphiles with l-amino acids show stronger affinity for the liposomes compared to the ones with d-amino acids. To examine their biological functions, we tested the cytotoxicity of nanofibers against mammalian primary cells using human bone marrow mesenchymal stem cells and murine astroglial cells. We demonstrated that cell viability increased when d-amino acids were incorporated in the structure of peptide amphiphiles, which is consistent with our finding of their weaker interactions with lipid bilayer membranes.

Hierarchical assemblies of proteins into fibrillar structures occur in both physiologic and pathologic extracellular spaces and often involve interactions between oppositely charged peptide domains. However, the interplay between tertiary structure dynamics and quaternary hierarchical structure formation remains unclear. In this work, we investigate supramolecular mimics of these systems by mixing one-dimensional assemblies of small alkylated peptides bearing opposite charge and varying in peptide sequence. We found that assemblies with weak cohesive interactions readily create fibrous superstructures of bundled filaments as molecules redistribute upon mixing. Low cohesion allows molecules to escape from the original assemblies and exchange dynamics help them reassemble into electrostatically stable bundles. However, we also found that kinetic barriers can be encountered in these systems and limit formation of the hierarchical structures at pH values where charge densities are high. Increasing intermolecular cohesion using longer peptide sequences that form stable β-sheets was found to suppress superstructure formation. Our findings suggest that low internal cohesion in protein systems could facilitate the conformational rearrangements required to create hierarchical structures.

The design of soft matter in which internal fuels or an external energy input can generate locomotion and shape transformations observed in living organisms is a key challenge. Such materials could assist in productive functions that may range from robotics to smart management of chemical reactions and communication with cells. In this context, hydrated matter that can function in aqueous media would be of great interest. Here, we report the design of hydrogels containing a scaffold of high-aspect ratio ferromagnetic nanowires with nematic order dispersed in a polymer network that change shape in response to light and experience torques in rotating magnetic fields. The synergistic response enables fast walking motion of macroscopic objects in water on either flat or inclined surfaces and also guides delivery of cargo through rolling motion and light-driven shape changes. The theoretical description of the response to the external energy input allowed us to program specific trajectories of hydrogel objects that were verified experimentally.

Supramolecular nanostructures formed through self-assembly can have energy landscapes, which determine their structures and functions depending on the pathways selected for their synthesis and processing, and on the conditions they are exposed to after their initial formation. We report here on the structural damage that occurs in supramolecular peptide amphiphile nanostructures, during freezing in aqueous media, and the self-repair pathways that restore their functions. We found that freezing converts long supramolecular nanofibers into shorter ones, compromising their ability to support cell adhesion, but a single heating and cooling cycle reverses the damage and rescues their bioactivity. Thermal energy in this cycle enables noncovalent interactions to reconfigure the nanostructures into the thermodynamically preferred long nanofibers, a repair process that is impeded by kinetic traps. In addition, we found that nanofibers disrupted during freeze drying also exhibit the ability to undergo thermal self-repair and recovery of their bioactivity, despite the extra disruption caused by the dehydration step. Following both freezing and freeze drying, which shorten the 1D nanostructures, their self-repair capacity through thermally driven elongation is inhibited by kinetically trapped states, which contain highly stable noncovalent interactions that are difficult to rearrange. These states decrease the extent of thermal nanostructure repair, an observation we hypothesize applies to supramolecular systems in general and is mechanistically linked to suppressed molecular exchange dynamics.

Water within and surrounding the structure of a biological system adopts context-specific dynamics that mediate virtually all of the events involved in the inner workings of a cell. These events range from protein folding and molecular recognition to the formation of hierarchical structures. Water dynamics are mediated by the chemistry and geometry of interfaces where water and biomolecules meet. Here we investigate experimentally and computationally the translational dynamics of vicinal water molecules within the volume of a supramolecular peptide nanofiber measuring 6.7 nm in diameter. Using Overhauser dynamic nuclear polarization relaxometry, we show that drastic differences exist in water motion within a distance of about one nanometer from the surface, with rapid diffusion in the hydrophobic interior and immobilized water on the nanofiber surface. These results demonstrate that water associated with materials designed at the nanoscale is not simply a solvent, but rather an integral part of their structure and potential functions.

The energy landscape of a supramolecular material can include different molecular packing configurations that differ in stability and function. We report here on a thermally driven crystalline order transition in the landscape of supramolecular nanostructures formed by charged chromophore amphiphiles in salt-containing aqueous solutions. An irreversible transition was observed from a metastable to a stable crystal phase within the nanostructures. In the stable crystalline phase, the molecules end up organized in a short scroll morphology at high ionic strengths and as long helical ribbons at lower salt content. This is interpreted as the result of the competition between electrostatic repulsive forces and attractive molecular interactions. Only the stable phase forms charge-transfer excitons upon exposure to visible light as indicated by absorbance and fluorescence features, second-order harmonic generation microscopy, and femtosecond transient absorbance spectroscopy. Interestingly, the supramolecular reconfiguration to the stable crystalline phase nanostructures enhances photosensitization of a proton reduction catalyst for hydrogen production.

Stimuli-induced structural transformations of molecular assemblies in aqueous solutions are integral to nanotechnological applications and biological processes. In particular, pH responsive amphiphiles as well as proteins with various degrees of ionization can reconfigure in response to pH variations. Here, we use in situ small and wide-angle X-ray scattering (SAXS/WAXS), transmission electron microscopy (TEM), and Monte Carlo simulations to show how charge regulation via pH induces morphological changes in the assembly of a positively charged peptide amphiphile (PA). Monte Carlo simulations and pH titration measurements reveal that ionic correlations in the PA assemblies shift the ionizable amine pK ∼ 8 from pK ∼ 10 in the lysine headgroup. SAXS and TEM show that with increasing pH, the assembly undergoes spherical micelle to cylindrical nanofiber to planar bilayer transitions. SAXS/WAXS reveal that the bilayer leaflets are interdigitated with the tilted PA lipid tails crystallized on a rectangular lattice. The details of the molecular packing in the membrane result from interplay between steric and van der Waals interactions. We speculate that this packing motif is a general feature of bilayers comprised of amphiphilic lipids with large ionic headgroups. Overall, our studies correlate the molecular charge and the morphology for a pH-responsive PA system and provide insights into the Å-scale molecular packing in such assemblies.

The development of synthetic structures that mimic mechanical actuation in living matter such as autonomous translation and shape changes remains a grand challenge for materials science. In living systems the integration of supramolecular structures and covalent polymers contributes to the responsive behaviour of membranes, muscles and tendons, among others. Here we describe hybrid light-responsive soft materials composed of peptide amphiphile supramolecular polymers chemically bonded to spiropyran-based networks that expel water in response to visible light. The supramolecular polymers form a reversibly deformable and water-draining skeleton that mechanically reinforces the hybrid and can also be aligned by printing methods. The noncovalent skeleton embedded in the network thus enables faster bending and flattening actuation of objects, as well as longer steps during the light-driven crawling motion of macroscopic films. Our work suggests that hybrid bonding polymers, which integrate supramolecular assemblies and covalent networks, offer strategies for the bottom-up design of soft matter that mimics living organisms.

Supramolecular assembly of peptide-based monomers into nanostructures offers many promising applications in advanced therapies. In this Tutorial Review, we introduce molecular designs to control the structure and potential biological function of supramolecular assemblies. An emphasis is placed on peptide-based supramolecular nanostructures that are intentionally designed to signal cells, either directly through the incorporation of amino acid sequences that activate receptors or indirectly by recruiting native signals such as growth factors. Additionally, we describe the use and future potential of hierarchical structures, such as single molecules that assemble into nanoscale fibers which then align to form macroscopic strings; the strings can then serve as scaffolds for cell growth, proliferation, and differentiation.

Skeletal muscle provides inspiration on how to achieve reversible, macroscopic, anisotropic motion in soft materials. Here we report on the bottom-up design of macroscopic tubes that exhibit anisotropic actuation driven by a thermal stimulus. The tube is built from a hydrogel in which extremely long supramolecular nanofibers are aligned using weak shear forces, followed by radial growth of thermoresponsive polymers from their surfaces. The hierarchically ordered tube exhibits reversible anisotropic actuation with changes in temperature, with much greater contraction perpendicular to the direction of nanofiber alignment. We identify two critical factors for the anisotropic actuation, macroscopic alignment of the supramolecular scaffold and its covalent bonding to polymer chains. Using finite element analysis and molecular calculations, we conclude polymer chain confinement and mechanical reinforcement by rigid supramolecular nanofibers are responsible for the anisotropic actuation. The work reported suggests strategies to create soft active matter with molecularly encoded capacity to perform complex tasks.

Conspectus Peptide amphiphiles (PAs) are small molecules that contain hydrophobic components covalently conjugated to peptides. In this Account, we describe recent advances involving PAs that consist of a short peptide sequence linked to an aliphatic tail. The peptide sequence can be designed to form β-sheets among the amino acids near the alkyl tail, while the residues farthest from the tail are charged to promote solubility and in some cases contain a bioactive sequence. In water, β-sheet formation and hydrophobic collapse of the aliphatic tails induce assembly of the molecules into supramolecular one-dimensional nanostructures, commonly high-aspect-ratio cylindrical or ribbonlike nanofibers. These nanostructures hold significant promise for biomedical functions due to their ability to display a high density of biological signals on their surface for targeting or to activate pathways, as well as for biocompatibility and biodegradable nature. Recent studies have shown that supramolecular systems, such as PAs, often become kinetically trapped in local minima along their self-assembly reaction coordinate, not unlike the pathways associated with protein folding. Furthermore, the assembly pathway can influence the shape, internal structure, and dimension of nanostructures and thereby affect their bioactivity. We discuss methods to map the energy landscape of a PA structure as a function of thermal energy and ionic strength and vary these parameters to convert between kinetically trapped and thermodynamically favorable states. We also demonstrate that the pathway-dependent morphology of the PA assembly can determine biological cell adhesion and survival rates. The dynamics associated with the nanostructures are also critical to their function, and techniques are now available to probe the internal dynamics of these nanostructures. For example, by conjugating radical electron spin labels to PAs, electron paramagnetic resonance spectroscopy can be used to study the rotational diffusion rates within the fiber, showing a liquidlike to solidlike transition through the cross section of the nanofiber. PAs can also be labeled with fluorescent dyes, allowing the use of super-resolution microscopy techniques to study the molecular exchange dynamics between PA fibers. For a weak hydrogen-bonding PA, individual PA molecules or clusters exchange between fibers in time scales as short as minutes. The amount of hydrogen bonding within PAs that dictates the dynamics also plays an important role in biological function. In one case, weak hydrogen bonding within a PA resulted in cell death through disruption of lipid membranes, while in another example reduced hydrogen bonding enhanced growth factor signaling by increasing lipid raft mobility. PAs are a promising platform for designing advanced hybrid materials. We discuss a covalent polymer with a rigid aromatic imine backbone and alkylated peptide side chains that simultaneously polymerizes and interacts with a supramolecular PA structure with identical chemistry to that of the side chains. The covalent polymerization can be “catalyzed” by noncovalent polymerization of supramolecular monomers, taking advantage of the dynamic nature of supramolecular assemblies. These novel hybrid structures have potential in self-repairing materials and as reusable scaffolds for delivery of drugs or other chemicals. Finally, we highlight recent biomedical applications of PAs and related structures, ranging from bone regeneration to decreasing blood loss during internal bleeding.

Charged nanoscale filaments are well-known in natural systems such as filamentous viruses and the cellular cytoskeleton. The unique properties of these structures have inspired the design of self-assembled nanofibers for applications in regenerative medicine, drug delivery, and catalysis, among others. We report here on an amphiphile of completely different chemistry based on azobenzene and a quaternary ammonium bromide headgroup that self-assembles into highly charged nanofibers in water and orders into two-dimensional crystals. Interestingly small-angle X-ray scattering (SAXS) shows that these fibers of 5.6 nm cross-sectional diameter order into crystalline arrays with remarkably large interfiber spacings of up to 130 nm. Solution concentration and temperature can be adjusted to control the interfiber spacings, and addition of salt destroyed the crystal packing indicating the electrostatic repulsions are necessary for the observed ordering. Our findings here demonstrate the universal nature of this phenomenon in systems of highly charged nanoscale filaments.

A large variety of functional self-assembled supramolecular nanostructures have been reported over recent decades.1 The experimental approach to these systems initially focused on the design of molecules for specific interactions that lead to discrete geometric structures.1–4 Recently, kinetics and mechanistic pathways of self-assembly have been investigated,6,7 but there remains a major gap in our understanding of internal conformational dynamics and their links to function. This challenge has been addressed through computational chemistry with the introduction of molecular dynamics (MD) simulations, which yield information on molecular fluctuations over time.5–7 Experimentally, it has been difficult to obtain analogous data with sub-nanometer spatial resolution. Thus, there is a need for experimental dynamics measurements, to confirm and guide computational efforts and to gain insight into the internal motion in supramolecular assemblies. Using site-directed spin labeling and electron paramagnetic resonance (EPR) spectroscopy, we measured conformational dynamics through the 6.7 nm cross-section of a self-assembled nanofiber in water and provide unique insight for the design of supramolecular functional materials.

Organic materials naturally lend themselves to the crafting of structure and function using the strategies of self-assembly and supramolecular chemistry employed so effectively by biological systems. This perspective illustrates progress over the past two decades on self-assembly in materials chemistry through research on systems where function is directly linked to noncovalent interactions among molecules. The genesis of this approach in chemistry of materials involves the design of relatively simple structures using hydrogen bonding, π–π stacking, metal–ligand interactions, electrostatic forces, strong dipole–dipole association, hydrophobic forces, and steric repulsion. Gradually many new and exciting opportunities have emerged, such as supramolecular nanostructures that assemble into functional bulk materials and supramolecular polymers in which the motif of covalent connections among monomers is imitated by creating one-dimensional assemblies of an arbitrarily large set of molecules in both compositio...

Coassembled molecular structures are known to exhibit a large variety of geometries and morphologies. A grand challenge of self-assembly design is to find techniques to control the crystal symmetries and overall morphologies of multicomponent systems. By mixing +3 and -1 ionic amphiphiles, we assemble crystalline ionic bilayers in a large variety of geometries that resemble polyhedral cellular crystalline shells and archaea wall envelopes. We combine TEM with SAXS and WAXS to characterize the coassembled structures from the mesoscopic to nanometer scale. The degree of ionization of the amphiphiles and their intermolecular electrostatic interactions are controlled by varying pH. At low and high pH values, we observe closed, faceted vesicles with two-dimensional hexagonal molecular arrangements, and at intermediate pH, we observe ribbons with rectangular-C packing. Furthermore, as pH increases, we observe interdigitation of the bilayer leaflets. Accurate atomistic molecular dynamics simulations explain the pH-dependent bilayer thickness changes and also reveal bilayers of hexagonally packed tails at low pH, where only a small fraction of anionic headgroups is charged. Coarse-grained simulations show that the mesoscale geometries at low pH are faceted vesicles where liquid-like edges separate flat crystalline domains. Our simulations indicate that the curved-to-polyhedral shape transition can be controlled by tuning the tail density in regions where sharp bends can form the polyhedral edges. In particular, the pH acts to control the overall morphology of the ionic bilayers by changing the local crystalline order of the amphiphile tails.

Asymmetry in chemical structure or shape at molecular, nanoscale, or microscopic levels is essential to a vast number of functionalities in both natural and artificial systems. Bottom-up approaches to create asymmetric supramolecular nanostructures are considered promising but this strategy suffers from the potentially dynamic nature of noncovalent interactions. We report here on supramolecular self-assembly of asymmetric peptide amphiphiles consisting of two different molecularly linked domains. We found that strong noncovalent interactions and a high degree of internal order among the asymmetric amphiphiles lead to nanoribbons with asymmetric faces due to the preferential self-association of the two domains. The capture of gold nanoparticles on only one face of the nanoribbons demonstrates symmetry breaking in these supramolecular structures.

© 2016 American Chemical Society. Coupling among chromophores in molecular assemblies is responsible for phenomena such as resonant energy transfer and intermolecular charge transfer. These processes are central to the fields of organic photovoltaics and photocatalysis, where it is necessary to funnel energy or charge to specific regions within the system. As such, a fundamental understanding of these transport processes is essential for developing new materials for photovoltaic and photocatalytic applications. Recently, photocatalytic systems based on photosensitizing perylene monomimide (PMI) chromophore amphiphiles were found to show variation in hydrogen gas (H2) production as a function of nanostructure crystallinity. The 2D crystalline systems form in aqueous electrolyte solution, which provides a high dielectric environment where the Coulomb potential between charges is mitigated. This results in relatively weakly bound excitons that are ideal for reducing protons. In order to understand how variations in crystalline structure affect H2generation, two representative PMI systems are investigated theoretically using a modified Holstein Hamiltonian. The Hamiltonian includes both molecular Frenkel excitations (FE) and charge-transfer excitations (CTE) coupled nonadiabatically to local intramolecular vibrations. Signatures of FE/CTE mixing and the extent of electron/hole separation are identified in the optical absorption spectrum and are found to correlate strongly to the observed H2production rates. The absorption spectral signatures are found to sensitively depend on the relative phase between the electron and hole transfer integrals, as well as the diabatic energy difference between the Frenkel and CT exciton bands. Our analysis provides design rules for artificial photosynthetic systems based on organic chromophore arrays.

Covalent and supramolecular polymers are two distinct forms of soft matter, composed of long chains of covalently and noncovalently linked structural units, respectively. We report a hybrid system formed by simultaneous covalent and supramolecular polymerizations of monomers. The process yields cylindrical fibers of uniform diameter that contain covalent and supramolecular compartments, a morphology not observed when the two polymers are formed independently. The covalent polymer has a rigid aromatic imine backbone with helicoidal conformation, and its alkylated peptide side chains are structurally identical to the monomer molecules of supramolecular polymers. In the hybrid system, covalent chains grow to higher average molar mass relative to chains formed via the same polymerization in the absence of a supramolecular compartment. The supramolecular compartments can be reversibly removed and re-formed to reconstitute the hybrid structure, suggesting soft materials with novel delivery or repair functions.

Long fibers assembled from peptide amphiphiles capable of binding the metalloporphyrin zinc protoporphyrin IX ((PPIX)Zn) have been synthesized. Rational peptide design was employed to generate a peptide, c16-AHL(3)K(3)-CO(2)H, capable of forming a β-sheet structure that propagates into larger fibrous structures. A porphyrin-binding site, a single histidine, was engineered into the peptide sequence in order to bind (PPIX)Zn to provide photophysical functionality. The resulting system indicates control from the molecular level to the macromolecular level with a high order of porphyrin organization. UV/visible and circular dichroism spectroscopies were employed to detail molecular organization, whereas electron microscopy and atomic force microscopy aided in macromolecular characterization. Preliminary picosecond transient absorption data are also reported. Reduced hemin, (PPIX)Fe(II), was also employed to highlight the material's versatility and tunability.

One of the challenges facing bulk heterojunction organic solar cells is obtaining organized films during the phase separation of intimately mixed donor and acceptor components. We report here on the use of hairpin-shaped sexithiophene molecules to generate by self-assembly grooved nanowires as the donor component in bulk heterojunction solar cells. Photovoltaic devices were fabricated via spin-casting to produce by solvent evaporation a percolating network of self-assembled nanowires and fullerene acceptors. Thermal annealing was found to increase power conversion efficiencies by promoting domain growth while still maintaining this percolating network of nanostructures. The benefits of self-assembly and grooved nanowires were examined by building devices from a soluble sexithiophene derivative that does not form one-dimensional structures. In these systems, excessive phase separation caused by thermal annealing leads to the formation of defects and lower device efficiencies. We propose that the unique hairpin shape of the self-assembling molecules allows the nanowires as they form to interact well with the fullerenes in receptor-ligand type configurations at the heterojunction of the two domains, thus enhancing device efficiencies by 23%.

© 2015 American Chemical Society. Light harvesting supramolecular assemblies are potentially useful structures as components of solar-to-fuel conversion materials. The development of these functional constructs requires an understanding of optimal packing modes for chromophores. We investigated here assembly in water and the photocatalytic function of perylene monoimide chromophore amphiphiles with different alkyl linker lengths separating their hydrophobic core and the hydrophilic carboxylate headgroup. We found that these chromophore amphiphiles (CAs) self-assemble into charged nanostructures of increasing aspect ratio as the linker length is increased. The addition of salt to screen the charged nanostructures induced the formation of hydrogels and led to internal crystallization within some of the nanostructures. For linker lengths up to seven methylenes, the CAs were found to pack into 2D crystalline unit cells within ribbon-shaped nanostructures, whereas the nine methylene CAs assembled into long nanofibers without crystalline molecular packing. At the same time, the different molecular packing arrangements after charge screening led to different absorbance spectra, despite the identical electronic properties of all PMI amphiphiles. While the crystalline CAs formed electronically coupled H-aggregates, only CAs with intermediate linker lengths showed evidence of high intermolecular orbital overlap. Photocatalytic hydrogen production using a nickel-based catalyst was observed in all hydrogels, with the highest turnovers observed for CA gels having intermediate linker lengths. We conclude that the improved photocatalytic performance of the hydrogels formed by supramolecular assemblies of the intermediate linker CA molecules likely arises from improved exciton splitting efficiencies due to their higher orbital overlap.

One of the challenges in organic systems with semiconducting function is the achievement of molecular orientation over large scales. We report here on the use of self-assembly kinetics to control long-range orientation of a quarterthiophene derivative designed to combine intermolecular π-π stacking and hydrogen bonding among amide groups. Assembly of these molecules in the solution phase is prevented by the hydrogen-bond-accepting solvent tetrahydrofuran, whereas formation of H-aggregates is facilitated in toluene. Rapid evaporation of solvent in a solution of the quarterthiophene in a 2:1:1 mixture of 1,4-dioxane/tetrahydrofuran/toluene leads to self-assembly of kinetically trapped mats of bundled fibers. In great contrast, slow drying in a toluene atmosphere leads to the homogeneous nucleation and growth of ordered structures shaped as rhombohedra or hexagonal prisms depending on concentration. Furthermore, exceedingly slow delivery of toluene from a high molecular weight polymer solution into the system through a porous aluminum oxide membrane results in the growth of highly oriented hexagonal prisms perpendicular to the interface. The amide groups of the compound likely adsorb onto the polar aluminum oxide surface and direct the self-assembly pathway toward heterogeneous nucleation and growth to form hexagonal prisms. We propose that the oriented prismatic polymorph results from the synergy of surface interactions rooted in hydrogen bonding on the solid membrane and the slow kinetics of self-assembly. These observations demonstrate how self-assembly conditions can be used to guide the supramolecular energy landscape to generate vastly different structures. These fundamental principles allowed us to grow oriented prismatic assemblies on transparent indium-doped tin oxide electrodes, which are of interest in organic electronics.

Aggregates of charged amphiphilic molecules have been found to access a structure at elevated temperature that templates alignment of supramolecular fibrils over macroscopic scales. The thermal pathway leads to a lamellar plaque structure with fibrous texture that breaks upon cooling into large arrays of aligned nanoscale fibres and forms a strongly birefringent liquid. By manually dragging this liquid crystal from a pipette onto salty media, it is possible to extend this alignment over centimetres in noodle-shaped viscoelastic strings. Using this approach, the solution of supramolecular filaments can be mixed with cells at physiological temperatures to form monodomain gels of aligned cells and filaments. The nature of the self-assembly process and its biocompatibility would allow formation of cellular wires in situ that have any length and customized peptide compositions for use in biological applications.