Search

Abstract Recently, flexible iontronic pressure sensors (FIPSs) with higher sensitivities and wider sensing ranges than conventional capacitive sensors have been widely investigated. Due to the difficulty of fabricating the nanostructures that are commonly used on electrodes and ionic layers by screen printing techniques, strategies for fabricating such devices using these techniques to drive their mass production have rarely been reported. Herein, for the first time, we employed a 2-dimensional (2D) hexagonal boron nitride (h-BN) as both an additive and an ionic liquid reservoir in an ionic film, making the sensor printable and significantly improving its sensitivity and sensing range through screen printing. The engineered sensor exhibited high sensitivity (Smin> 261.4 kPa−1) and a broad sensing range (0.05–450 kPa), and it was capable of stable operation at a high pressure (400 kPa) for more than 5000 cycles. In addition, the integrated sensor array system allowed accurate monitoring of wrist pressure and showed great potential for health care systems. We believe that using h-BN as an additive in an ionic material for screen-printed FIPS could greatly inspire research on 2D materials for similar systems and other types of sensors. Hexagonal boron nitride (h-BN) was employed for the first time to make iontronic pressure sensor arrays with high sensitivity and a broad sensing range by screen printing.

In recent years, flexible pressure sensing arrays applied in medical monitoring, human-machine interaction, and the Internet of Things have received a lot of attention for their excellent performance. Epidermal sensing arrays can enable the sensing of physiological information, pressure, and other information such as haptics, providing new avenues for the development of wearable devices. This paper reviews the recent research progress on epidermal flexible pressure sensing arrays. Firstly, the fantastic performance materials currently used to prepare flexible pressure sensing arrays are outlined in terms of substrate layer, electrode layer, and sensitive layer. In addition, the general fabrication processes of the materials are summarized, including three-dimensional (3D) printing, screen printing, and laser engraving. Subsequently, the electrode layer structures and sensitive layer microstructures used to further improve the performance design of sensing arrays are discussed based on the limitations of the materials. Furthermore, we present recent advances in the application of fantastic-performance epidermal flexible pressure sensing arrays and their integration with back-end circuits. Finally, the potential challenges and development prospects of flexible pressure sensing arrays are discussed in a comprehensive manner.

Flexible pressure sensors play an important role in flexible robotics, human-machine interaction (HMI), and human physiological information. However, most of the reported flexible pressure sensors suffer from a highly nonlinear response and a significant decrease in sensitivity at high pressures. Herein, we propose a flexible novel iontronic pressure sensor based on monolayer molybdenum disulfide (MoS2). Based on the unique structure and the excellent mechanical properties as well as the large intercalation capacitance of MoS2, the prepared sensor holds an ultra-high sensitivity (Smax = 89.75 kPa−1) and a wide sensing range (722.2 kPa). Further, the response time and relaxation time of the flexible sensor are only 3 ms, respectively, indicating that the device can respond to external pressure rapidly. In addition, it shows long-term cycling stability (over 5000 cycles with almost no degradation) at a high pressure of 138.9 kPa. Finally, it is demonstrated that the sensor can be used in physiological information monitoring and flexible robotics. It is anticipated that our prepared sensor provide a reliable approach to advance the theory and practicality of the flexible sensor electronics.

A two-dimensional (2D) direction-of-arrival (DOA) estimation method for coherently distributed (CD) sources has been proposed in high real-time situation using only one snapshot. Utilising two uniform linear arrays (ULAs), the proposed algorithm first construct four equivalent matrices with rotational structures using one snapshot, and then a total equivalent covariance is extended by the four matrices. Finally, two rotational invariance matrices can been calculated by ESPRIT-like algorithm, and the eigenvalues which contains of the information of the central DOAs can be obtained by eigen-decomposition of the two matrices. To improve the performance of the proposed method, in-phased accomplished data is proposed. Without snapshots accumulation, peak searching, and correlation process, the 2D DOA estimation method for CD sources can be used for real-time situation. Several simulation results are used to illustrate the performance of the proposed method.

The newly launched X-ray pulsar navigation-I (XPNAV-1) is an experimental satellite of China that is designed for X-ray pulsar observation. This paper presents the initial observation results and aims to recover the Crab pulsar’s pulse profile to verify the X-ray instrument’s capability of observing pulsars in space. With the grazing-incidence focusing type instrument working at the soft X-ray band (0.5–10 keV), up to 162 segments of observations of the Crab pulsar are fulfilled, and more than 5 million X-ray events are recorded. Arrival times of photons are corrected to the solar system barycentre, and the 33 ms pulse period is sought out for Crab. Epoch folding of all the corrected photon times generates the refined pulse profile of Crab. The characteristic two-peak profile proves that the Crab pulsar has been clearly seen, so that the conclusion is made that XPNAV-1’s goal of being capable of observing pulsars is achieved.