Search

The $\sim$5 Myr PDS 70 is the only known system with protoplanets residing in the cavity of the circumstellar disk from which they formed, ideal for studying exoplanet formation and evolution within its natal environment. Here we report the first spin constraint and C/O measurement of PDS 70b from Keck/KPIC high-resolution spectroscopy. We detected CO (3.8 $\sigma$) and H$_2$O (3.5 $\sigma$) molecules in the PDS 70b atmosphere via cross-correlation, with a combined CO and H$_2$O template detection significance of 4.2 $\sigma$. Our forward model fits, using BT-Settl model grids, provide an upper limit for the spin-rate of PDS 70b ($<$29 km s$^{-1}$). The atmospheric retrievals constrain the PDS 70b C/O ratio to ${0.28}^{+0.20}_{-0.12}$ ($<$0.63 under 95$\%$ confidence level) and a metallicity [C/H] of ${-0.2}^{+0.8}_{-0.5}$ dex, consistent with that of its host star. The following scenarios can explain our measured C/O of PDS 70b in contrast with that of the gas-rich outer disk (for which C/O $\gtrsim$ 1). First, the bulk composition of PDS 70b might be dominated by dust+ice aggregates rather than disk gas. Another possible explanation is that the disk became carbon-enriched $\textit{after}$ PDS 70b was formed, as predicted in models of disk chemical evolution and as observed in both very low mass star and older disk systems with $\textit{JWST}$/MIRI. Because PDS 70b continues to accrete and its chemical evolution is not yet complete, more sophisticated modeling of the planet and the disk, and higher quality observations of PDS 70b (and possibly PDS 70c), are necessary to validate these scenarios., Comment: Accepted to ApJ Letters; 15 pages, 3 figures

Chalcogenide optical phase change materials (PCMs) have garnered significant interest for their growing applications in programmable photonics, optical analog computing, active metasurfaces, and beyond. Limited endurance or cycling lifetime is however increasingly becoming a bottleneck toward their practical deployment for these applications. To address this issue, we performed a systematic study elucidating the cycling failure mechanisms of Ge$_2$Sb$_2$Se$_4$Te (GSST), a common optical PCM tailored for infrared photonic applications, in an electrothermal switching configuration commensurate with their applications in on-chip photonic devices. We further propose a set of design rules building on insights into the failure mechanisms, and successfully implemented them to boost the endurance of the GSST device to over 67,000 cycles.

GQ Lup B is one of the few substellar companions with a detected cicumplanetary disk, or CPD. Observations of the CPD suggest the presence of a cavity, possibly formed by an exo-satellite. Using the Keck Planet Imager and Characterizer (KPIC), a high contrast imaging suite that feeds a high resolution spectrograph (1.9-2.5 microns, R$\sim$35,000), we present the first dedicated radial velocity (RV) observations around a high-contrast, directly imaged substellar companion, GQ Lup B, to search for exo-satellites. Over 11 epochs, we find a best and median RV error of 400-1000 m/s, most likely limited by systematic fringing in the spectra due to transmissive optics within KPIC. With this RV precision, KPIC is sensitive to exomoons 0.6-2.8% the mass of GQ Lup B ($\sim 30 M_{\text{Jup}}$) at separations between the Roche limit and $65 R_{\text{Jup}}$, or the extent of the cavity inferred within the CPD detected around GQ Lup B. Using simulations of HISPEC, a high resolution infrared spectrograph planned to debut at W.M. Keck Observatory in 2026, we estimate future exomoon sensitivity to increase by over an order of magnitude, providing sensitivity to less massive satellites potentially formed within the CPD itself. Additionally, we run simulations to estimate the amount of material that different masses of satellites could clear in a CPD to create the observed cavity. We find satellite-to-planet mass ratios of $q > 2 \times 10^{-4}$ can create observable cavities and report a maximum cavity size of $\sim 51 \, R_{\text{Jup}}$ carved from a satellite., Comment: 15 pages, 5 figures

Young, self-luminous super-Jovian companions discovered by direct imaging provide a challenging test of planet formation and evolution theories. By spectroscopically characterizing the atmospheric compositions of these super-Jupiters, we can constrain their formation histories. Here we present studies of the recently discovered HIP 99770 b, a 16 MJup high-contrast companion on a 17 au orbit, using the fiber-fed high-resolution spectrograph KPIC (R~35,000) on the Keck II telescope. Our K-band observations led to detections of H2O and CO in the atmosphere of HIP 99770 b. We carried out free retrieval analyses using petitRADTRANS to measure its chemical abundances, including the metallicity and C/O ratio, projected rotation velocity (vsini), and radial velocity (RV). We found that the companion's atmosphere has C/O=0.55(-0.04/+0.06) and [M/H]=0.26(-0.23/+0.24) (1{\sigma} confidence intervals), values consistent with those of the Sun and with a companion formation via gravitational instability or core accretion. The projected rotation velocity < 7.8 km/s is small relative to other directly imaged companions with similar masses and ages. This may imply a near pole-on orientation or effective magnetic braking by a circumplanetary disk. In addition, we added the companion-to-primary relative RV measurement to the orbital fitting and obtained updated constraints on orbital parameters. Detailed characterization of super-Jovian companions within 20 au like HIP 99770 b is critical for understanding the formation histories of this population., Comment: 18 pages, 5 figures, accepted to AJ

High contrast imaging of extrasolar planets and circumstellar disks requires extreme wavefront stability. Such stability can be achieved with active wavefront control (WFC). The next generation of ground- and space-based telescopes will require a robust form of WFC in order to image planets at small inner working angles and extreme flux ratios with respect to the host star. WFC algorithms such as implicit Electric Field Conjugation (iEFC) reduce stellar leakage by minimizing the electric field within a given region of an image, creating a dark hole. iEFC utilizes an empirical approach to sense and remove speckles in the focal plane. While iEFC is empirically calibrated and can handle optical model errors, there are still model assumptions made during the calibration. The performance of iEFC will degrade if the system changes due to slow, optomechanical drifts. In this work, we assess the iEFC performance impacts of pupil misalignments on the deformable mirror and focal plane misalignments on the detector. We base our analysis on the MagAO-X instrument, an extreme AO system installed on the Magellan-Clay telescope, to develop iEFC misalignment tolerancing requirements for both ground- and space-based missions. We present end-to-end physical optics simulations of the MagAO-X instrument, demonstrating iEFC alignment tolerance., Comment: 8 pages, 6 figures, SPIE Astronomical Telescopes + Instrumentation 2024

MagAO-X is the extreme coronagraphic adaptive optics (AO) instrument for the 6.5-meter Magellan Clay telescope and is currently undergoing a comprehensive batch of upgrades. One innovation that the instrument features is a deformable mirror (DM) dedicated for non-common path aberration correction (NCPC) within the coronagraph arm. We recently upgraded the 97 actuator NCPC DM with a 1000 actuator Boston Micromachines Kilo-DM which serves to (1) correct non-common path aberrations which hamper performance at small inner-working angles, (2) facilitate focal-plane wavefront control algorithms (e.g., electric field conjugation) and (3) enable 10 kHz correction speeds (up from 2 kHz) to assist post-AO, real-time low-order wavefront control. We present details on the characterization and installation of this new DM on MagAO-X as part of our efforts to improve deep contrast performance for imaging circumstellar objects in reflected light. Pre-installation procedures included use of a Twyman-Green interferometer to build an interaction matrix for commanding the DM surface, in closed-loop, to a flat state for seamless integration into the instrument. With this new NCPC DM now installed, we report on-sky results from the MagAO-X observing run in March -- May 2024 for the Focus Diversity Phase Retrieval and implicit Electric Field Conjugation algorithms for quasistatic speckle removal and in-situ Strehl ratio optimization, respectively., Comment: 9 pages, 9 figures, proceedings of SPIE Astronomical Telescopes + Instrumentation 2024

MagAO-X is the coronagraphic extreme adaptive optics system for the 6.5 m Magellan Clay Telescope. We report the results of commissioning the first phase of MagAO-X. Components now available for routine observations include: the >2 kHz high-order control loop consisting of a 97 actuator woofer deformable mirror (DM), a 2040 actuator tweeter DM, and a modulated pyramid wavefront sensor (WFS); classical Lyot coronagraphs with integrated low-order (LO) WFS and control using a third 97-actuator non-common path correcting (NCPC) DM; broad band imaging in g, r, i, and z filters with two EMCCDs; simultaneous differential imaging in H-alpha; and integral field spectroscopy with the VIS-X module. Early science results include the discovery of an H-alpha jet, images of accreting protoplanets at H-alpha, images of young extrasolar giant planets in the optical, discovery of new white dwarf companions, resolved images of evolved stars, and high-contrast images of circumstellar disks in scattered light in g-band (500 nm). We have commenced an upgrade program, called "Phase II", to enable high-contrast observations at the smallest inner working angles possible. These upgrades include a new 952 actuator NCPC DM to enable coronagraphic wavefront control; phase induced amplitude apodization coronagraphs; new fast cameras for LOWFS and Lyot-LOWFS; and real-time computer upgrades. We will report the status of these upgrades and results of first on-sky testing in March-May 2024., Comment: Presented at SPIE Astronomical Telescopes

Enterprise chatbots, powered by generative AI, are emerging as key applications to enhance employee productivity. Retrieval Augmented Generation (RAG), Large Language Models (LLMs), and orchestration frameworks like Langchain and Llamaindex are crucial for building these chatbots. However, creating effective enterprise chatbots is challenging and requires meticulous RAG pipeline engineering. This includes fine-tuning embeddings and LLMs, extracting documents from vector databases, rephrasing queries, reranking results, designing prompts, honoring document access controls, providing concise responses, including references, safeguarding personal information, and building orchestration agents. We present a framework for building RAG-based chatbots based on our experience with three NVIDIA chatbots: for IT/HR benefits, financial earnings, and general content. Our contributions are three-fold: introducing the FACTS framework (Freshness, Architectures, Cost, Testing, Security), presenting fifteen RAG pipeline control points, and providing empirical results on accuracy-latency tradeoffs between large and small LLMs. To the best of our knowledge, this is the first paper of its kind that provides a holistic view of the factors as well as solutions for building secure enterprise-grade chatbots.", Comment: 8 pages, 6 figures, 2 tables, Preprint submission to ACM CIKM 2024

The Keck Planet Imager and Characterizer (KPIC), a series of upgrades to the Keck II Adaptive Optics System and Instrument Suite, aims to demonstrate high-resolution spectroscopy of faint exoplanets that are spatially resolved from their host stars. In this paper, we measure KPIC's sensitivity to companions as a function of separation (i.e., the contrast curve) using on-sky data collected over four years of operation. We show that KPIC is able to reach contrasts of $1.3 \times 10^{-4}$ at 90 mas and $9.2 \times 10^{-6}$ at 420 mas separation from the star, and that KPIC can reach planet-level sensitivities at angular separations within the inner working angle of coronagraphic instruments such as GPI and SPHERE. KPIC is also able to achieve more extreme contrasts than other medium-/high-resolution spectrographs that are not as optimized for high-contrast performance. We decompose the KPIC performance budget into individual noise terms and discuss limiting factors. The fringing that results from combining a high-contrast imaging system with a high-resolution spectrograph is identified as an important source of systematic noise. After mitigation and correction, KPIC is able to reach within a factor of 2 of the photon noise limit at separations < 200 mas. At large separations, KPIC is limited by the background noise performance of NIRSPEC., Comment: 16 pages, 6 figures, submitted to the proceedings of SPIE Astronomical Telescopes + Instrumentation 2024, 13096-69

The effects of pressure waves-flame collisions and tube aspect ratio on flame evolution and the formation of tulip and distorted tulip flames were investigated using numerical simulations of the fully compressible Navier-Stokes equations coupled with a detailed chemical model for a stoichiometric hydrogen-air mixture. It is shown that: (1) the rarefaction wave generated by the decelerating flame in the unburned gas is the primary physical process leading to the flame front inversion and the tulip flame formation, (2) the flame front instabilities (Darrieus-Landau or Rayleigh-Taylor) do not participate in the formation of the tulip flame, since the time of the flame front inversion due to the rarefaction wave is considerably shorter than the characteristic times of the development of instabilities with wavelengths of the order of the tube width. The first rarefaction wave in the unburned gas mixture is generated after the flame skirt touches the tube walls and the flame is slowed down due to the reduction in flame surface area. The collision of the flame with the pressure waves reflected from the closed end of the tube leads to a faster and more pronounced formation of a tulip-shaped flame. In later stages, flame collisions with pressure waves can lead to the formation of distorted tulip flames due to short-wavelength Rayleigh-Taylor instability of the flame front. Because flame acceleration and deceleration occur much faster in 3D flames than in 2D flames, tulip flame formation also occurs much faster in 3D flames than in 2D flames., Comment: 33 pages, 12 figures, Nordita preprint

Using Keck Planet Imager and Characterizer (KPIC) high-resolution ($R$~35000) spectroscopy from 2.29-2.49 $\mu$m, we present uniform atmospheric retrievals for eight young substellar companions with masses of ~10-30 $M_\textrm{Jup}$, orbital separations spanning ~50-360 au, and $T_\textrm{eff}$ between ~1500-2600 K. We find that all companions have solar C/O ratios, and metallicities, to within the 1-2$\sigma$ level, with the measurements clustered around solar composition. Stars in the same stellar associations as our systems have near-solar abundances, so these results indicate that this population of companions is consistent with formation via direct gravitational collapse. Alternatively, core accretion outside the CO snowline would be compatible with our measurements, though the high mass ratios of most systems would require rapid core assembly and gas accretion in massive disks. On a population level, our findings can be contrasted with abundance measurements for directly imaged planets with m<10 $M_\textrm{Jup}$, which show tentative atmospheric metal enrichment. In addition, the atmospheric compositions of our sample of companions are distinct from those of hot Jupiters, which most likely form via core accretion. For two companions with $T_\textrm{eff}$~1700-2000 K (kap And b and GSC 6214-210 b), our best-fit models prefer a non-gray cloud model with >3$\sigma$ significance. The cloudy models yield 2-3$\sigma$ lower $T_\textrm{eff}$ for these companions, though the C/O and [C/H] still agree between cloudy and clear models at the $1\sigma$ level. Finally, we constrain 12CO/13CO for three companions with the highest S/N data (GQ Lup b, HIP 79098 b, and DH Tau b), and report $v$sin($i$) and radial velocities for all companions., Comment: Accepted to ApJ, 52 pages, 20 figures

We used the Keck Planet Imager and Characterizer (KPIC) to obtain high-resolution (R$\sim$35,000) K-band spectra of kappa Andromedae b, a planetary-mass companion orbiting the B9V star, kappa Andromedae A. We characterized its spin, radial velocity, and bulk atmospheric parameters through use of a forward modeling framework to jointly fit planetary spectra and residual starlight speckles, obtaining likelihood-based posterior probabilities. We also detected H$_{2}$O and CO in its atmosphere via cross correlation. We measured a $v\sin(i)$ value for kappa And b of $38.42\pm{0.05}$ km/s, allowing us to extend our understanding of the population of close in bound companions at higher rotation rates. This rotation rate is one of the highest spins relative to breakup velocity measured to date, at close to $50\%$ of breakup velocity. We identify a radial velocity $-17.35_{-0.09}^{+0.05}$ km/s, which we use with existing astrometry and RV measurements to update the orbital fit. We also measure an effective temperature of $1700\pm{100}$ K and a $\log(g)$ of $4.7\pm{0.5}$ cgs dex., Comment: 14 pages, 7 figures, accepted for publication in AJ

We present the projected rotational velocity and molecular abundances for HD 33632 Ab obtained via Keck Planet Imager and Characterizer high-resolution spectroscopy. HD 33632 Ab is a nearby benchmark brown dwarf companion at a separation of $\sim$20 au that straddles the L/T transition. Using a forward-modeling framework with on-axis host star spectra, self-consistent substellar atmospheric and retrieval models for HD 33632 Ab, we derive a projected rotational velocity of 53 $\pm$ 3 km/s and carbon/water mass fractions of log CO = $-$2.3 $\pm$ 0.3 and log H$_2$O = $-$2.7 $\pm$ 0.2. The inferred carbon-to-oxygen ratio (C/O = 0.58 $\pm$ 0.14), molecular abundances, and metallicity ([C/H] = 0.0 $\pm$ 0.2 dex) of HD 33632 Ab are consistent with its host star. Although detectable methane opacities are expected in L/T transition objects, we did not recover methane in our KPIC spectra, partly due to the high $v\sin{i}$ and to disequilibrium chemistry at the pressures we are sensitive to. We parameterize the spin as the ratio of rotation over break-up velocity, and compare HD 33632 Ab to a compilation of >200 very low-mass objects (M$\lesssim$0.1 M$_{\odot}$) that have spin measurements in the literature. There appears to be no clear trend for the isolated field low-mass objects versus mass, but a tentative trend is identified for low-mass companions and directly imaged exoplanets, similar to previous findings. A larger sample of close-in gas giant exoplanets and brown dwarfs will critically examine our understanding of their formation and evolution through rotation and chemical abundance measurements., Comment: Accepted for publication in the Astrophysical Journal. 36 pages, 15 figures, 5 tables

Connecting a coronagraph instrument to a spectrograph via a single-mode optical fiber is a promising technique for characterizing the atmospheres of exoplanets with ground and space-based telescopes. However, due to the small separation and extreme flux ratio between planets and their host stars, instrument sensitivity will be limited by residual starlight leaking into the fiber. To minimize stellar leakage, we must control the electric field at the fiber input. Implicit electric field conjugation (iEFC) is a model-independent wavefront control technique in contrast with classical electric field conjugation (EFC) which requires a detailed optical model of the system. We present here the concept of an iEFC-based wavefront control algorithm to improve stellar rejection through a single-mode fiber. As opposed to image-based iEFC which relies on minimizing intensity in a dark hole region, our approach aims to minimize the amount of residual starlight coupling into a single-mode fiber. We present broadband simulation results demonstrating a normalized intensity greater than 10^{-10} for both fiber-based EFC and iEFC. We find that both control algorithms exhibit similar performance for the low wavefront error (WFE) case, however, iEFC outperforms EFC by approximately 100x in the high WFE regime. Having no need for an optical model, this fiber-based approach offers a promising alternative to EFC for ground and space-based telescope missions, particularly in the presence of residual WFE., Comment: Accepted in Journal of Astronomical Telescopes, Instruments, and Systems (JATIS), 29 pages, 7 figures

We present the first on-sky segmented primary mirror closed-loop piston control using a Zernike wavefront sensor (ZWFS) installed on the Keck II telescope. Segment co-phasing errors are a primary contributor to contrast limits on Keck and will be necessary to correct for the next generation of space missions and ground-based extremely large telescopes (ELTs), which will all have segmented primary mirrors. The goal of the ZWFS installed on Keck is to monitor and correct primary mirror co-phasing errors in parallel with science observations. The ZWFS is ideal for measuring phase discontinuities such as segment co-phasing errors and is one of the most sensitive WFS, but has limited dynamic range. The vector-ZWFS at Keck works on the adaptive optics (AO) corrected wavefront and consists of a metasurface focal plane mask which imposes two different phase shifts on the core of the point spread function (PSF) to two orthogonal light polarizations, producing two pupil images. This design extends the dynamic range compared with the scalar ZWFS. The primary mirror segment pistons were controlled in closed-loop using the ZWFS, improving the Strehl ratio on the NIRC2 science camera by up to 10 percentage points. We analyze the performance of the closed-loop tests, the impact on NIRC2 science data, and discuss the ZWFS measurements., Comment: Accepted for publication in the Astrophysical Journal (ApJ). 17 pages, 16 figures

The 1RXS J034231.8+121622 system consists of an M dwarf primary and a directly imaged low-mass stellar companion. We use high resolution spectroscopic data from Keck/KPIC to estimate the objects' atmospheric parameters and radial velocities (RVs). Using PHOENIX stellar models, we find that the primary has a temperature of 3460 $\pm$ 50 K a metallicity of 0.16 $\pm$ 0.04, while the secondary has a temperature of 2510 $\pm$ 50 K and a metallicity of $0.13\substack{+0.12 \\ -0.11}$. Recent work suggests this system is associated with the Hyades, placing it an older age than previous estimates. Both metallicities agree with current $[Fe/H]$ Hyades measurements (0.11 -- 0.21). Using stellar evolutionary models, we obtain significantly higher masses for the objects, of 0.30 $\pm$ 0.15 $M_\odot$ and 0.08 $\pm$ 0.01 $M_\odot$ (84 $\pm$ 11 $M_{Jup}$) respectively. Using the RVs and a new astrometry point from Keck/NIRC2, we find that the system is likely an edge-on, moderately eccentric ($0.41\substack{+0.27 \\ -0.08}$) configuration. We also estimate the C/O ratio of both objects using custom grid models, obtaining 0.42 $\pm$ 0.10 (primary) and 0.55 $\pm$ 0.10 (companion). From these results, we confirm that this system most likely went through a binary star formation process in the Hyades. The significant changes in this system's parameters since its discovery highlight the importance of high resolution spectroscopy for both orbital and atmospheric characterization of directly imaged companions., Comment: 30 pages, 18 figures, accepted for publication in AJ

Vortex fiber nulling (VFN) is a technique for detecting and characterizing faint companions at small separations from their host star. A near-infrared ($\sim2.3 \mu$m) VFN demonstrator mode was deployed on the Keck Planet Imager and Characterizer (KPIC) instrument at the Keck Observatory and presented earlier. In this paper, we present the first VFN companion detections. Three targets, HIP 21543 Ab, HIP 94666 Ab, and HIP 50319 B, were detected with host-companion flux ratios between 70 and 430 at and within one diffraction beamwidth ($\lambda/D$). We complement the spectra from KPIC VFN with flux ratio and position measurements from the CHARA Array to validate the VFN results and provide a more complete characterization of the targets. This paper reports the first direct detection of these three M dwarf companions, yielding their first spectra and flux ratios. Our observations provide measurements of bulk properties such as effective temperatures, radial velocities, and v$\sin{i}$, and verify the accuracy of the published orbits. These detections corroborate earlier predictions of the KPIC VFN performance, demonstrating that the instrument mode is ready for science observations., Comment: 13 pages, 2 figures; Accepted to ApJ Letters

Personal devices have adopted diverse authentication methods, including biometric recognition and passcodes. In contrast, headphones have limited input mechanisms, depending solely on the authentication of connected devices. We present Moonwalk, a novel method for passive user recognition utilizing the built-in headphone accelerometer. Our approach centers on gait recognition; enabling users to establish their identity simply by walking for a brief interval, despite the sensor's placement away from the feet. We employ self-supervised metric learning to train a model that yields a highly discriminative representation of a user's 3D acceleration, with no retraining required. We tested our method in a study involving 50 participants, achieving an average F1 score of 92.9% and equal error rate of 2.3%. We extend our evaluation by assessing performance under various conditions (e.g. shoe types and surfaces). We discuss the opportunities and challenges these variations introduce and propose new directions for advancing passive authentication for wearable devices.

Hand gesture recognition is becoming a more prevalent mode of human-computer interaction, especially as cameras proliferate across everyday devices. Despite continued progress in this field, gesture customization is often underexplored. Customization is crucial since it enables users to define and demonstrate gestures that are more natural, memorable, and accessible. However, customization requires efficient usage of user-provided data. We introduce a method that enables users to easily design bespoke gestures with a monocular camera from one demonstration. We employ transformers and meta-learning techniques to address few-shot learning challenges. Unlike prior work, our method supports any combination of one-handed, two-handed, static, and dynamic gestures, including different viewpoints, and the ability to handle irrelevant hand movements. We implement three real-world applications using our customization method, conduct a user study, and achieve up to 94% average recognition accuracy from one demonstration. Our work provides a viable path for vision-based gesture customization, laying the foundation for future advancements in this domain., Comment: 2024 (UIST' 24). USA, 14 pages

Programmable and reconfigurable optics hold significant potential for transforming a broad spectrum of applications, spanning space explorations to biomedical imaging, gas sensing, and optical cloaking. The ability to adjust the optical properties of components like filters, lenses, and beam steering devices could result in dramatic reductions in size, weight, and power consumption in future optoelectronic devices. Among the potential candidates for reconfigurable optics, chalcogenide-based phase change materials (PCMs) offer great promise due to their non-volatile and analogue switching characteristics. Although PCM have found widespread use in electronic data storage, these memory devices are deeply sub-micron-sized. To incorporate phase change materials into free-space optical components, it is essential to scale them up to beyond several hundreds of microns while maintaining reliable switching characteristics. This study demonstrated a non-mechanical, non-volatile transmissive filter based on low-loss PCMs with a 200 $\mu$m$ \times $200 $\mu$m switching area. The device/metafilter can be consistently switched between low- and high-transmission states using electrical pulses with a switching contrast ratio of 5.5 dB. The device was reversibly switched for 1250 cycles before accelerated degradation took place. The work represents an important step toward realizing free-space reconfigurable optics based on PCMs.

The effects of pressure waves on the tulip flame formation in closed and semi-open tubes were studied using numerical simulations of the fully compressible Navier-Stokes equations coupled to a detailed chemical model for stoichiometric hydrogen air mixture. Rarefaction waves generated by the decelerating flame are shown to be the primary physical process leading to the flame front inversion and the tulip flame formation for spark and for planar ignited flames in closed tubes. In the case of a spark ignited flame, the first rarefaction wave is generated by the flame, which is decelerating due to the reduction in flame surface area as the flame skirt touches the tube walls. Flame collisions with pressure waves in a closed tube result in additional deceleration stages and rarefaction waves that shorten the time of the tulip flame formation., Comment: 13 pages, 12 figures

M dwarfs are common host stars to exoplanets but often lack atmospheric abundance measurements. Late-M dwarfs are also good analogs to the youngest substellar companions, which share similar $T_{\rm eff}\sim2300-2800~K$. We present atmospheric analyses for the M7.5 companion HIP 55507 B and its K6V primary star with Keck/KPIC high-resolution ($R\sim35,000$) $K$ band spectroscopy. First, by including KPIC relative radial velocities between the primary and secondary in the orbit fit, we improve the dynamical mass precision by 60% and find $M_B=88.0_{-3.2}^{+3.4}$ $M_{\rm Jup}$, putting HIP 55507 B above the stellar-substellar boundary. We also find that HIP 55507 B orbits its K6V primary star with $a=38^{+4}_{-3}$ AU and $e=0.40\pm0.04$. From atmospheric retrievals of HIP 55507 B, we measure $\rm [C/H]=0.24\pm0.13$, $\rm [O/H]=0.15\pm0.13$, and $\rm C/O=0.67\pm0.04$. Moreover, we strongly detect $\rm ^{13}CO$ ($7.8\sigma$ significance) and tentatively detect $\rm H_2^{18}O$ ($3.7\sigma$ significance) in companion's atmosphere, and measure $\rm ^{12}CO/^{13}CO=98_{-22}^{+28}$ and $\rm H_2^{16}O/H_2^{18}O=240_{-80}^{+145}$ after accounting for systematic errors. From a simplified retrieval analysis of HIP 55507 A, we measure $\rm ^{12}CO/^{13}CO=79_{-16}^{+21}$ and $\rm C^{16}O/C^{18}O=288_{-70}^{+125}$ for the primary star. These results demonstrate that HIP 55507 A and B have consistent $\rm ^{12} C/^{13}C$ and $\rm ^{16}O/^{18}O$ to the $<1\sigma$ level, as expected for a chemically homogeneous binary system. Given the similar flux ratios and separations between HIP 55507 AB and systems with young, substellar companions, our results open the door to systematically measuring $\rm ^{13}CO$ and $\rm H_2^{18}O$ abundances in the atmospheres of substellar or even planetary-mass companions with similar spectral types., Comment: Accepted to ApJ, 28 pages, 14 figures

We present high-resolution $K$-band emission spectra of the quintessential hot Jupiter HD 189733 b from the Keck Planet Imager and Characterizer (KPIC). Using a Bayesian retrieval framework, we fit the dayside pressure-temperature profile, orbital kinematics, mass-mixing ratios of H$_2$O, CO, CH$_4$, NH$_3$, HCN, and H$_2$S, and the $\rm ^{13}CO/^{12}CO$ ratio. We measure mass fractions of $\rm \log H_2O = -2.0^{+0.4}_{-0.4}$ and $\rm \log CO = -2.2^{+0.5}_{-0.5}$, and place upper limits on the remaining species. Notably, we find $\rm \log CH_4 < -4.5$ at 99\% confidence, despite its anticipated presence at the equilibrium temperature of HD 189733 b assuming local thermal equilibrium. We make a tentative ($\sim3\sigma$) detection of $\rm ^{13}CO$, and the retrieved posteriors suggest a $\rm ^{12}C/^{13}C$ ratio similar to or substantially less than the local interstellar value. The possible $\rm ^{13}C$ enrichment would be consistent with accretion of fractionated material in ices or in the protoplanetary disk midplane. The retrieved abundances correspond to a substantially sub-stellar atmospheric $\rm C/O = 0.3\pm0.1$, while the carbon and oxygen abundances are stellar to slightly super-stellar, consistent with core-accretion models which predict an inverse correlation between C/O and metallicity. The specific combination of low C/O and high metallicity suggests significant accretion of solid material may have occurred late in the formation process of HD 189733 b., Comment: 17 pages, 7 figures, 2 tables, accepted in AJ

We consider a self-supervised approach to anomaly detection in tabular data. Random transformations are applied to the data, and then each transformation is identified based on its output. These predicted transformations are used to identify anomalies. In tabular data this approach faces many challenges that are related to the uncorrelated nature of the data. These challenges affect the transformations that should be used, as well as the use of their predictions. To this end, we propose SORTAD, a novel algorithm that is tailor-made to solve these challenges. SORTAD optimally chooses random transformations that help the classification process, and have a scoring function that is more sensitive to the changes in the transformations classification prediction encountered in tabular data. SORTAD achieved state-of-the-art results on multiple commonly used anomaly detection data sets, as well as in the overall results across all data sets tested., Comment: 16 pages, 7 figures

Vortex fiber nulling (VFN) is a single-aperture interferometric technique for detecting and characterizing exoplanets separated from their host star by less than a diffracted beam width. VFN uses a vortex mask and single mode fiber to selectively reject starlight while coupling off-axis planet light with a simple optical design that can be readily implemented on existing direct imaging instruments that can feed light to an optical fiber. With its axially symmetric coupling region peaking within the inner working angle of conventional coronagraphs, VFN is more efficient at detecting new companions at small separations than conventional direct imaging, thereby increasing the yield of on-going exoplanet search campaigns. We deployed a VFN mode operating in K band ($2.0{-}2.5~\mu$m) on the Keck Planet Imager and Characterizer (KPIC) instrument at the Keck II Telescope. In this paper we present the instrument design of this first on-sky demonstration of VFN and the results from on-sky commissioning, including planet and star throughput measurements and predicted flux-ratio detection limits for close-in companions. The instrument performance is shown to be sufficient for detecting a companion $10^3$ times fainter than a $5^{\mathrm{th}}$ magnitude host star in 1 hour at a separation of 50 mas (1.1$\lambda/D$). This makes the instrument capable of efficiently detecting substellar companions around young stars. We also discuss several routes for improvement that will reduce the required integration time for a detection by a factor ${>}$3., Comment: 26 pages, 5 figures; Accepted to JATIS

The early stages of hydrogen-air flame dynamics and the physical mechanism of tulip flame formation were studied using high-resolution numerical simulations to solve the two-dimensional fully compressible Navier-Stokes equations coupled with a one-step chemical model, which was calibrated to obtain the correct the laminar flame velocity-pressure dependence. The formation of tulip flames was investigated for a flame ignited by a spark or by a planar ignition and propagating to the opposite closed or open end. For a flame ignited by a spark on-axis at the closed end of the tube and propagating to the opposite closed or open end, a tulip flame is created by a tulip-shaped axial velocity profile in the unburned gas flow near the flame front caused by the rarefaction wave(s) created by the flame during the deceleration stage(s). It is shown that, in a tube with both closed ends, this mechanism of tulip flame formation also holds for flames initiated by planar ignition. The deceleration stages in the case of planar ignition are caused by collisions of the flame front with pressure waves reflected from the opposite end of the tube. In the case of a flame initiated by planar ignition and propagating toward the open end, the mechanism of tulip flame formation is related to the stretching of the flame skirt edges backward along the side wall of the tube due to wall friction, which leads to the formation of bulges in the flame front near the tube walls. The bulges grow and finally meet at the axis of the tube, forming a tulip-shaped flame. Regardless of the method of flame initiation at the closed end, no distorted tulip flame is formed when the flame propagates to the open end of the tube., Comment: 37 pages, 12 figures. arXiv admin note: text overlap with arXiv:2209.00709

This Technical Design Report presents a detailed description of all aspects of the LUXE (Laser Und XFEL Experiment), an experiment that will combine the high-quality and high-energy electron beam of the European XFEL with a high-intensity laser, to explore the uncharted terrain of strong-field quantum electrodynamics characterised by both high energy and high intensity, reaching the Schwinger field and beyond. The further implications for the search of physics beyond the Standard Model are also discussed.

We present a novel and straightforward approach for the spatio-spectral characterization of ultrashort pulses. This minimally intrusive method relies on placing a mask with specially arranged pinholes in the beam path before the focusing optic and retrieving the spectrally-resolved laser wavefront from the speckle pattern produced at focus. We test the efficacy of this new method by accurately retrieving chromatic aberrations, such as pulse front tilt, pulse front curvature, and higher-order aberrations introduced by a spherical lens. The simplicity and scalability of this method, combined with its compatibility with single-shot operation, make it a promising candidate to become a new standard diagnostic tool in high-intensity laser facilities., Comment: Algorithm updated: near-field intensity measurement no longer needed. Revised version extracts phase and amplitude at pinhole positions. Wavefronts nearly unchanged. Paper adjusted, typos corrected, and cosmetic figure changes made

The Keck Planet Imager and Characterizer (KPIC) is an instrument at the Keck II telescope that enables high-resolution spectroscopy of directly imaged exoplanets and substellar companions. KPIC uses single-mode fibers to couple the adaptive optics system to Keck's near-infrared spectrometer (NIRSPEC). However, KPIC's sensitivity at small separations is limited by the leakage of stellar light into the fiber. Speckle nulling uses a deformable mirror to destructively interfere starlight with itself, a technique typically used to reduce stellar signal on a focal-plane imaging detector. We present the first on-sky demonstration of speckle nulling through an optical fiber with KPIC, using NIRSPEC to collect exposures that measure speckle phase for quasi-real-time wavefront control while also serving as science data. We repeat iterations of measurement and correction, each using at least 5 exposures. We show a decrease in the on-sky leaked starlight by a factor of 2.6 to 2.8 in the targeted spectral order, at a spatial separation of 2.0 {\lambda}/D in K-band. This corresponds to an estimated factor of 2.6 to 2.8 decrease in the required exposure time to reach a given SNR, relative to conventional KPIC observations. The performance of speckle nulling is limited by instability in the speckle phase: when the loop is opened, the null-depth degrades by a factor of 2 on the timescale of a single phase measurement, which would limit the suppression that can be achieved. Future work includes exploring gradient-descent methods, which may be faster and thereby able to achieve deeper nulls. In the meantime, the speckle nulling algorithm demonstrated in this work can be used to decrease stellar leakage and improve the signal-to-noise of science observations., Comment: 18 pages, 4 figures