Search

We examine the interplay between spectral bandwidth and illumination curvature in ptychography. By tailoring the divergence of the illumination, broader spectral bandwidths can be tolerated without requiring algorithmic modifications to the forward model. In particular, a strong wavefront curvature transitions a far-field diffreaction geometry to an effectively near-field one, which is lees affected by temporal coherence effects. The relaxed temporal coherence requirements allow for leveraging wider spectral bandwidths and larger illumination spots. Our findings open up new avenues towards utilizing pink and broadband beams for increased flux and throughput at both synchrotron facilities and lab-scale beamlines.

We present high-speed and wide-field EUV ptychography at 13.5 nm wavelength using a table-top high-order harmonic source. By employing a scientific complementary metal oxide semiconductor (sCMOS) detector the scan time for sub-20 nm high-resolution measurements were significantly reduced by up to a factor of five. The fast frame rate of sCMOS enables wide-field imaging with a field of view of 100 {\mu}m x 100 {\mu}m with an imaging speed of 4.6 Mpix/h. Furthermore, fast EUV wavefront characterization is employed using a combination of the sCMOS detector with orthogonal probe relaxation.

Table-top extreme ultraviolet (EUV) microscopy offers unique opportunities for label-free investigation of biological samples. Here, we demonstrate ptychographic EUV imaging of two dried, unstained model specimens: germlings of a fungus (Aspergillus nidulans), and bacteria (Escherichia coli) cells at 13.5 nm wavelength. We find that the EUV spectral region, which to date has not received much attention for biological imaging, offers sufficient penetration depths for the identification of intracellular features. By implementing a position-correlated ptychography approach, we demonstrate a millimeter-squared field of view enabled by infrared illumination combined with sub-60 nm spatial resolution achieved with EUV illumination on selected regions of interest. The strong element contrast at 13.5 nm wavelength enables the identification of the nanoscale material composition inside the specimens. Our work will advance and facilitate EUV imaging applications and enable further possibilities in life science.

We present a carrier-envelope offset (CEO) stable ytterbium-doped fiber chirped-pulse amplification system employing the technology of coherent beam combining and delivering more than 1 kW of average power at a pulse repetition rate of 80 MHz. The CEO stability of the system is 220 mrad rms, characterized out-of-loop with an f-to-2f interferometer in a frequency offset range of 10 Hz to 20 MHz. The high-power amplification system boosts the average power of the CEO stable oscillator by five orders of magnitude while increasing the phase noise by only 100 mrad. No evidence of CEO noise deterioration due to coherent beam combining is found. Low-frequency CEO fluctuations at the chirped-pulse amplifier are suppressed by a slow loop feedback. To the best of our knowledge, this is the first demonstration of a coherently combined laser system delivering an outstanding average power and high CEO stability at the same time.

The impact of nonlinear refraction and residual absorption on the achievable peak and average power in beam-splitter-based coherent beam combination is analyzed theoretically. While the peak power remains limited only by the aperture size, a fundamental average power limit is given by the thermo-optical and thermo-mechanical properties of the beam splitter material and its coatings. Based on our analysis, 100 kW average power can be obtained with state-of-the-art optics at maintained high beam quality (M2 {\leq} 1.1) and at only 2% loss of combining efficiency. This result indicates that the power-scaling potential of today's beam-splitter-based coherent beam combination is far from being depleted. A potential scaling route to megawatt-level average power is discussed for optimized beam splitter geometry.

A multipass cell for nonlinear compression to few-cycle pulse duration is introduced comprising dielectrically enhanced silver mirrors on silicon substrates. Spectral broadening with 388 W output average power and 776 {\mu}J pulse energy is obtained at 82% cell transmission. A high output beam quality (M2<1.2) and a high spatio-spectral homogeneity (97.5%) as well as the compressibility of the output pulses to 6.9 fs duration are demonstrated. Finite element analysis reveals scalability of this cell to 2 kW average output power.

We present a high-power source of broadband terahertz radiation covering the whole THz spectral region (0.1-30 THz). The two-color gas plasma generation process is driven by a state-of-the-art Ytterbium fiber chirped pulse amplification system based on coherent combination of 16 rod-type amplifiers. Prior to the THz generation, the pulses are spectrally broadened in a multi-pass-cell and compressed to 37 fs with a pulse-energy of 1.3 mJ at a repetition rate of 500 kHz. A gas-jet scheme has been employed for the THz generation, increasing the efficiency of the process to 0.1%. The air-biased-coherent-detection scheme is implemented to characterize the full bandwidth of the generated radiation. A THz average power of 640 mW is generated, which is the highest THz average power achieved to date. This makes this source suitable for a variety of applications, e.g. spectroscopy of strongly absorbing samples or driving nonlinear effects for the studies of material properties.

We experimentally analyze the average-power-scaling capabilities of ultrafast, thulium-doped fiber amplifiers. It has been theoretically predicted that thulium-doped fiber laser systems, with an emission wavelength around 2 um, should be able to withstand much higher heat-loads than their Yb-doped counterparts before the onset of transverse mode instability (TMI) is observed. In this work we experimentally verify this theoretical prediction by operating thulium doped fibers at very high heat-load. In separate experiments we analyze the performance of two different large-core, thulium-doped fiber amplifiers. The first experiment aims at operating a short, very-large core, thulium-doped fiber amplifier at extreme heat-load levels of more than 300 W/m. Even at this extreme heat-load level, the onset of TMI is not observed. The second experiment maximizes the extractable average-output power from a large-core, thulium-doped, fiber amplifier. We have achieved a pump-limited average output power of 1.15 kW without the onset of TMI. However, during a longer period of operation at this power level the amplifier performance steadily degraded and TMI could be observed for average powers in excess of 847 W thereafter. This is the first time, to the best of our knowledge, that TMI has been reported in a thulium-doped fiber amplifier.

Microscopy with extreme ultraviolet (EUV) radiation holds promise for high-resolution imaging with excellent material contrast, due to the short wavelength and numerous element-specific absorption edges available in this spectral range. At the same time, EUV radiation has significantly larger penetration depths than electrons. It thus enables a nano-scale view into complex three-dimensional structures that are important for material science, semiconductor metrology, and next-generation nano-devices. Here, we present high-resolution and material-specific microscopy at 13.5 nm wavelength. We combine a highly stable, high photon-flux, table-top EUV source with an interferometrically stabilized ptychography setup. By utilizing structured EUV illumination, we overcome the limitations of conventional EUV focusing optics and demonstrate high-resolution microscopy at a half-pitch lateral resolution of 16 nm. Moreover, we propose mixed-state orthogonal probe relaxation ptychography, enabling robust phase-contrast imaging over wide fields of view and long acquisition times. In this way, the complex transmission of an integrated circuit is precisely reconstructed, allowing for the classification of the material composition of mesoscopic semiconductor systems.

An ultrafast fiber chirped-pulse amplification laser system based on coherent combination of 16 ytterbium-doped rod-type amplifiers is presented. It generates 10 mJ pulse energy at 1 kW average power and 120 fs pulse duration. A partially helium-protected, two-staged chirped-pulse amplification grating compressor is implemented to maintain the close to diffraction-limited beam quality by avoiding nonlinear absorption in air.

In this work we analyze the power scaling potential of amplifying multicore fibers (MCFs) used in coherently-combined systems. In particular, in this study we exemplarily consider rod-type MCFs with 2x2 up to 10x10 Ytterbium doped cores arranged in a squared pattern. We will show that, even though increasing the number of active cores will lead to higher output powers, particular attention has to be paid to arising thermal effects, which potentially degrade the performance of these systems. Additionally, we analyze the influence of the core dimensions on the extractable and combinable output power and pulse energy. This includes a detailed study on the thermal effects that influence the propagating transverse modes and, in turn, the amplification efficiency, the combining efficiency, the onset of nonlinear effect, as well as differences in the optical path lengths between the cores. Considering all these effects under rather extreme conditions, the study predicts that average output powers higher than 10 kW from a single 1 m long Ytterbium-doped MCF are feasible and femtosecond pulses with energies higher than 400 mJ can be extracted and efficiently recombined in a filled-aperture scheme., Comment: This is a post-peer-review, pre-copyedit version of an article published in Optics Express. The final authenticated version is available online at: https://doi.org/10.1364/OE.410614

We demonstrate the reliable generation of 1-mJ, 31-fs pulses with an average power of 1 kW by post-compression of 200-fs pulses from a coherently combined Yb:fiber laser system in an argon-filled Herriott-type multi-pass cell with an overall compression efficiency of 96%. We also analyze the output beam, revealing essentially no spatio-spectral couplings or beam quality loss.

We present on THz generation in the two-color gas plasma scheme driven by a high-power, ultrafast fiber laser system. The applied scheme is a promising approach for scaling the THz average power but it has been limited so far by the driving lasers to repetition rates up to 1 kHz. Here, we demonstrate recent results of THz generation operating at a two orders of magnitude higher repetition rate. This results in a unprecedented THz average power of 50 mW. The development of compact, table-top THz sources with high repetition rate and high field strength is crucial for studying nonlinear responses of materials, particle acceleration or faster data acquisition in imaging and spectroscopy.

Differentially pumped capillaries, i.e., capillaries operated in a pressure gradient environment, are widely used for nonlinear pulse compression. In this work, we show that strong pressure gradients and high gas throughputs can cause spatiotemporal instabilities of the output beam profile. The instabilities occur with a sudden onset as the flow evolves from laminar to turbulent. Based on the experimental and numerical results, we derive guidelines to predict the onset of those instabilities and discuss possible applications in the context of nonlinear flow dynamics.

A simplification strategy for Segmented Mirror Splitters (SMS) used as beam combiners is presented. These devices are useful for compact beam division and combination of linear and 2-D arrays. However, the standard design requires unique thin-film coating sections for each input beam and thus potential for scaling to high beam-counts is limited due to manufacturing complexity. Taking advantage of the relative insensitivity of the beam combination process to amplitude variations, numerical techniques are used to optimize highly-simplified designs with only one, two or three unique coatings. It is demonstrated that with correctly chosen coating reflectivities, the simplified optics are capable of high combination efficiency for several tens of beams. The performance of these optics as beamsplitters in multicore fiber amplifier systems is analyzed, and inhomogeneous power distribution of the simplified designs is noted as a potential source of combining loss in such systems. These simplified designs may facilitate further scaling of filled-aperture coherently combined systems., Comment: 11 pages, 7 figures

The pulse-energy scaling technique electro-optically controlled divided-pulse amplification is implemented in a high-power ultrafast fiber laser system based on coherent beam combination. A fiber-integrated front end and a multi-pass cell based back end allow for a small footprint and a modular implementation. Bursts of 8 pulses are amplified parallel in up to 12 ytterbium-doped large-pitch fiber amplifiers. Subsequent spatio-temporal coherent combination of the 96 total amplified pulse replicas to a single pulse results in a pulse energy of 23 mJ at an average power of 674 W, compressible to a pulse duration of 235 fs. To the best of our knowledge, this is the highest pulse energy ever accomplished with a fiber CPA system.

A novel technique for divided-pulse amplification is presented in a proof-of-principle experiment. A pulse burst, cut out of the pulse train of a mode-locked oscillator, is amplified and temporally combined into a single pulse. High combination efficiency and excellent pulse contrast are demonstrated. The system is mostly fiber-coupled, enabling a high interferometric stability. This approach provides access to the amplitude and phase of the individual pulses in the burst to be amplified, potentially allowing the compensation of gain saturation and nonlinear phase mismatches within the burst. Therefore, this technique enables the scaling of the peak power and pulse energy of pulsed laser systems beyond currently prevailing limitations.

We present a novel approach for temporal contrast enhancement of energetic laserpulses by filtered SPM broadened spectra. A measured temporal contrast enhancement by at least 7 orders of magnitude in a simple setup has been achieved. This technique is applicable to a wide range of laser parameters and poses a highly efficient alternative to existing contrast-enhancement methods.

An ultrafast fiber chirped-pulse amplifier comprising 8 coherently combined amplifier channels is presented. The laser delivers 1 kW average power at 1 mJ pulse energy and 260 fs pulse duration. Excellent beam quality and low noise performance are confirmed. The laser has proven suitable for demanding scientific applications. Further power scaling is possible right away using even more amplifier channels

We present an ultrafast fiber laser system delivering 4.6 W average power at 258 nm based on two-stage fourth-harmonic generation in beta barium borate (BBO). The beam quality is close to diffraction limited with an M2- value of 1.3 x 1.6. The pulse duration is 150 fs, which potentially is compressible down to 40 fs. A plain BBO and a Sapphire-BBO compound are compared with respect to the achievable beam quality in the conversion process. This laser is applicable in scientific and industrial fields. Further scaling to higher average power is discussed

An ultrafast laser delivering 10.4 kW average output power based on coherent combination of twelve stepindex fiber amplifiers is presented. The system emits close-to-transform-limited 254 fs pulses at 80 MHz repetition rate, has a high beam quality (M2<=1.2), and a low relative intensity noise of 0.56% in the frequency range of from 1 Hz to 1 MHz. Automated spatiotemporal alignment allows for hands-off operation.

An ultrafast laser based on coherent beam combination of four ytterbium-doped step-index fiber amplifiers is presented. The system delivers an average power of 3.5 kW and a pulse duration of 430 fs at 80 MHz repetition rate. The beam quality is excellent (M2<1.24x1.10) and the relative intensity noise is as low as 1% in the frequency span from 1 Hz to 1 MHz. The system is turn-key operable as it features an automated spatial and temporal alignment of the interferometric amplification channels.

We present a novel phase locking scheme for the coherent combination of beam arrays in the filled aperture configuration. Employing a phase dithering mechanism for the different beams similar to LOCSET, dithering frequencies for sequential combination steps are reused. By applying an additional phase alternating scheme, this allows to use standard synchronized multichannel lock-in electronics for phase locking a large number of channels even when the frequency bandwidth of the employed phase actuators is limited.

Few-cycle lasers are essential for many research areas such as attosecond physics that promises to address fundamental questions in science and technology. Therefore, further advancements are connected to significant progress in the underlying laser technology. Here, two-stage nonlinear compression of a 660 W femtosecond fiber laser system is utilized to achieve unprecedented average power levels of energetic ultrashort or even few-cycle laser pulses. In a first compression step 408 W, 320 uJ, 30fs pulses are achieved, which can be further compressed to 216 W, 170 uJ, 6.3 fs pulses in a second compression stage. This is the highest average power few-cycle laser system presented so far. It is expected to significantly advance the fields of high harmonic generation and attosecond science.

The performance of fiber laser systems has drastically increased over recent decades, which has opened up new industrial and scientific applications for this technology. However, currently a number of physical effects prevents further power scaling. Coherent combination of beams from multiple emitters has been established as a power scaling technique beyond these limitations. It is possible to increase the average power and, for pulsed laser systems, also parameters such as the pulse energy and the peak power. To realize such laser systems, various aspects have to be taken into account which include beam combination elements, stabilization systems and the output parameters of the individual amplifiers. After an introduction to the topic, various ways of implementing coherent beam combination for ultrashort pulses are explored. Besides the spatial combination of beams, the combination of pulses in time will also be discussed. Recent experimental results will be presented, including multi-dimensional (i.e. spatial and temporal) combination. Finally, an outlook on possible further developments is given, focused on scaling the number of combinable beams and pulses.

In this work the experimental realization of a tunable high photon flux extreme ultraviolet light source is presented. This is enabled by high harmonic generation of two temporally delayed driving pulses, resulting in a tuning range of 0.8 eV at the 19th harmonic at 22.8 eV. The implemented approach allows for fast tuning of the spectrum, is highly flexible and is scalable towards full spectral coverage at higher photon energies., Comment: 4 pages, 5 figures

Two-Photon Microscopy (TPM) can provide three-dimensional morphological and functional contrast in vivo. Through proper staining, TPM can be utilized to create virtual, H&E equivalent images and thus can improve throughput in histology-based applications. We previously reported on a new light source for TPM that employs a compact and robust fiber-amplified, directly modulated laser. This laser is pulse-to-pulse wavelength switchable between 1064 nm, 1122 nm, and 1186 nm with an adjustable pulse duration from 50ps to 5ns and arbitrary repetition rates up to 1MHz at kW-peak powers. Despite the longer pulse duration, it can achieve similar average signal levels compared to fs-setups by lowering the repetition rate to achieve similar cw and peak power levels. The longer pulses lead to a larger number of photons per pulse, which yields single shot fluorescence lifetime measurements (FLIM) by applying a fast 4 GSamples/s digitizer. In the previous setup, the wavelengths were limited to 1064 nm and longer. Here, we use four wave mixing in a non-linear photonic crystal fiber to expand the wavelength range down to 940 nm. This wavelength is highly suitable for imaging green fluorescent proteins in neurosciences and stains such as acridine orange (AO), eosin yellow (EY) and sulforhodamine 101 (SR101) used for histology applications. In a more compact setup, we also show virtual H&E histological imaging using a direct 1030 nm fiber MOPA.

In recent years nanoscale coherent imaging has emerged as an indispensable imaging modality allowing to surpass the resolution limit given by classical imaging optics. At the same time, attosecond science has experienced enormous progress and has revealed the ultrafast dynamics in atoms, molecules, and complex materials. Combining attosecond temporal resolution of pump-probe experiments with nanometer spatial resolution would allow studying ultrafast dynamics on the smallest spatio-temporal scales but has not been demonstrated yet. Unfortunately, the large bandwidth of attosecond pulses usually hinders high-resolution coherent imaging. Here we present a robust holography-enhanced coherent imaging method, which allows combining high quality and high spatial resolution coherent imaging with a large spectral bandwidth. By implementing our method at a high harmonic source we demonstrate, for the first time, a spatial resolution of 34 nm (2.5 {\lambda}) in combination with a spectral bandwidth supporting a Fourier limited pulse duration of only 380 as. The method is single-shot capable, additionally retrieves the spectrum from the measured diffraction pattern, and is thus immune against shot-to-shot fluctuations. This paves the way for an ultrafast view on nanoscale dynamics e.g. ultrafast charge transfer or ultrafast spin currents being relevant for Petahertz electronics and future data storage.

Dual Comb Spectroscopy proved its versatile capabilities in molecular fingerprinting in different spectral regions, but not yet in the ultraviolet (UV). Unlocking this spectral window would expand fingerprinting to the electronic energy structure of matter.This will access the prime triggers of photo-chemical reactions with unprecedented spectral resolution. In this research article, we discuss the milestones marking the way to the first UV dual comb spectrometer. We present experimental and simulated studies towards UV dual comb spectroscopy, directly applied to planned absorption measurements of formaldehyde (centered at 343 nm, 3.6 eV) and argon (80 nm, 16 eV). This will enable an unparalleled relative resolution of up to $10^{-9}$ - with a table-top UV source surpassing any synchrotron linked spectrometer by at least two and any grating-based UV spectrometer by up to six orders of magnitude.

This work presents a review on the effect of transverse mode instability in high-power fiber laser systems and the corresponding investigations led worldwide over the last decade. This manuscript includes the description of the experimental observations, the physical origin of this effect, as well as some of the proposed mitigation strategies., Comment: (c) 2020 Optical Society of America. One print or electronic copy may be made for personal use only. Systematic reproduction and distribution, duplication of any material in this paper for a fee or for commercial purposes, or modifications of the content of this paper are prohibited

Ptychography enables coherent diffractive imaging (CDI) of extended samples by raster scanning across the illuminating XUV/X-ray beam thereby generalizing the unique advantages of CDI techniques. Table-top realizations of this method are urgently needed for many applications in sciences and industry. Previously, it was only possible to image features much larger than the illuminating wavelength with table-top ptychography although knife-edge tests suggested sub-wavelength resolution. However, most real-world imaging applications require resolving of the smallest and closely-spaced features of a sample in an extended field of view. In this work, we resolve features as small as 2.5 \lambda (45 nm) by using a table-top ptychography setup and a high-order harmonic XUV source. For the first time, a Rayleigh-type criterion is used as a direct and unambiguous resolution metric for high-resolution table-top setup. This reliably qualifies this imaging system for real-world applications e.g. in biological sciences, material sciences, imaging integrated circuits and semiconductor mask inspection., Comment: 8 pages, 4 figures

Compact, ultra-high-speed self-bearing permanent-magnet motors enable a wide scope of applications including an increasing number of optical ones. For implementation in an optical setup the rotors have to satisfy high demands regarding their velocity and pointing errors. Only a restricted number of measurements of these parameters exist and only at relatively low velocities. This manuscript presents the measurement of the velocity and pointing errors at rotation frequencies up to 5 kHz. The acquired data allows to identify the rotor drive as the main source of velocity variations with fast fluctuations of up to 3.4 ns (RMS) and slow drifts of 23 ns (RMS) over ~120 revolutions at 5 kHz in vacuum. At the same rotation frequency the pointing fluctuated by 12 $\mu$rad (RMS) and 33 $\mu$rad (peak-to-peak) over ~10000 roundtrips. To our best knowledge this states the first measurement of velocity and pointing errors at multi-kHz rotation frequencies and will allow potential adopters to evaluate the feasibility of such rotor drives for their application.

Trapping nanoscopic objects to observe their dynamic behaviour for extended periods of time is an ongoing quest. Particularly, sub-100nm transparent objects are hard to catch and most techniques rely on immobilisation or transient diffusion through a confocal laser focus. We present an Anti-Brownian ELectrokinetic trap (pioneered by A. E. Cohen and W. E. Moerner) to hold nanoparticles and individual FoF1-ATP synthase proteins in solution. We are interested in the conformational dynamics of this membrane-bound rotary motor protein that we monitor using single-molecule FRET. The ABELtrap is an active feedback system cancelling the nano-object's Brownian motion by applying an electric field. We show how the induced electrokinetic forces confine the motion of nanoparticles and proteoliposomes to the centre of the trap., Comment: 8 pages, 3 figures

Extreme ultraviolet (XUV) lasers are essential for the investigation of fundamental physics. Especially high repetition rate, high photon flux sources are of major interest for reducing acquisition times and improving signal to noise ratios in a plethora of applications. Here, an XUV source based on cascaded frequency conversion is presented, which delivers due to the drastic better single atom response for short wavelength drivers, an average output power of (832 +- 204) {\mu}W at 21.7 eV. This is the highest average power produced by any HHG source in this spectral range surpassing precious demonstrations by more than a factor of four. Furthermore, a narrow-band harmonic at 26.6 eV with a relative energy bandwidth of only {\Delta}E/E= 1.8 x 10E-3 has been generated, which is of high interest for high precision spectroscopy experiments., Comment: 4 Pages, 4 Pictures