Search

Cross-section behaviour for cold-formed high strength steel (HSS) irregular hexagonal hollow section (IHexHS) stub columns under combined compression and bending is studied and presented in this paper. Finite element models were developed and validated using the existing experimental data collated from the previous research. Upon the validated finite element models, extensive parametric studies were subsequently carried out to generate more numerical data covering a wider range of cross-section dimensions, steel grades and load combinations from pure compression to pure bending. The obtained numerical results were utilised to assess the accuracy and the applicability of the current design codes, such as Eurocode of EN 1993-1-12 (EC3) and the North American code of ANSI/AISC 360-16 (AISC) for cold-formed HSS IHexHS stub columns under combined loading. It was demonstrated that the existing design codes can be safely applied and can be extended for cold-formed HSS IHexHS stub columns design under combined loading. In cross-sectional resistance predictions, conservative results were provided from the existing design codes. The over-predictions were primarily due to the neglect of the strain hardening and plate element interaction. The end points used in the interaction curves of EC3 and AISC adopt an idealised elastic-plastic material model to derive the corresponding resistance in cross-sectional level. The employment of Continuous Strength Method (CSM) leads to improved accuracy in cross-sectional resistance prediction with updated end points in the interaction curve. More consistent and reliable predictions were revealed by carrying out reliability analysis in accordance with EN 1990. [ABSTRACT FROM AUTHOR]

A field-programmable gate array (FPGA) based high-speed broadband data acquisition system is designed. The system has a dual channel simultaneous acquisition function. The maximum sampling rate is 500 MSa/s and bandwidth is 200 MHz, which solves the large bandwidth, high-speed signal acquisition and processing problems. At present, the data acquisition system is successfully used in broadband receiver test systems. [ABSTRACT FROM AUTHOR]

With the increase of severe soil erosion problem, soil and water conservation has become an urgent concern for sustainable development. Small watershed experimental observation is the traditional paradigm for soil and water control. However, the establishment of experimental watershed usually takes long time, and has the limitations of poor repeatability and high cost. Moreover, the popularization of the results from the experimental watershed is limited for other areas due to the differences in watershed conditions. Therefore, it is not sufficient to completely rely on this old paradigm for soil and water loss control. Recently, scenario analysis based on watershed modeling has been introduced into watershed management, which can provide information about the effectiveness of different management practices based on the quantitative simulation of watershed processes. Because of its merits such as low cost, short period, and high repeatability, scenario analysis shows great potential in aiding the development of watershed management strategy. This paper elaborated a new paradigm using watershed modeling and scenario analysis for soil and water conservation, illustrated this new paradigm through two cases for practical watershed management, and explored the future development of this new soil and water conservation paradigm. [ABSTRACT FROM AUTHOR]