Search

To facilitate Ganoderma lucidum submerged cultivation and achieve high productivity, four fine powder solid substrates incorporated with different nitrogen-rich supplements were utilized to grow the fungus and as solid seed for its submerged culture. Of the four solid seeds, the soybean meal solid seed gave the highest biomass (10.73 g/L) and exopolysaccharide (EPS) (1.22 g/L), higher than those (8.36 g/L biomass and 0.44 g/L EPS) obtained with mycelial liquid seed. The optimal level of soybean meal supplementation was 20% (w/w) for production of the solid seed. Following single factor experiments, levels of three selected process variables were optimized as: the moisture content of solid seed, 70%; inoculum size, 0.8 g/flask; and rotary speed, 160 rpm. These conditions were validated experimentally with improved EPS yield of 1.33 g/L. The developed solid seed can be conveniently used for G. lucidum submerged culture with improved EPS productivity. [ABSTRACT FROM AUTHOR]

ϵ-Poly- L-lysine (ϵ-PL) is an L-lysine homopolymer with strong antimicrobial activity, which is generally produced by Streptomyces strains. ϵ-PL is only produced under acidic conditions in liquid culture, and to improve the current understanding of ϵ-PL biosynthesis, the present study was undertaken to investigate the effects of ϵ-PL on its producer Streptomyces ahygroscopicus GIM8, under acidic and neutral conditions. The results indicated that a neutral pH favored ϵ-PL adsorption onto the cells, whereas minimal adsorption occurred at pH 4.0, the maximum pH for ϵ-PL production. At pH 7.0, small amounts of ϵ-PL caused considerable ATP leakage from the cells, which showed increased membrane permeability. Conversely, ATP leakage was inhibited by ϵ-PL at pH 4.0. Transmission electron microscopy investigation indicated that the cytoplasmic membrane was the primary site of ϵ-PL activity at pH 7.0, and that cell shape was maintained. Metabolic activity profiles revealed that ϵ-PL decreased cellular metabolic activity at a relatively low rate at pH 7.0. However, the toxic effect was significantly enhanced at pH 4.0. Based on these data, a mechanism for the effect of ϵ-PL on ϵ-PL-producing cells under neutral and acidic conditions is proposed. Additionally, acidic conditions may potentially be required for ϵ-PL biosynthesis in liquid culture because low pH can increase membrane permeability and prevent binding of ϵ-PL onto cells, both of which favor the secretion of the ϵ-PL produced by the cells into the broth. This research contributes to the current understanding of ϵ-PL biosynthesis. [ABSTRACT FROM AUTHOR]

ε-Poly-L-lysine (ε-PL) is a homopolymer of L-lysine molecules connected between the ε amino and alpha carboxyl groups. This polymer is currently used as a natural preservative in food. Insufficient biomass is a major problem in ε-PL fermentation. Here, to improve cell growth and ε-PL productivity, various nitrogen-rich nutrients were supplemented into flask cultures after 16 h cultivation, marking the onset of ε-PL biosynthesis. Yeast extract, soybean powder, corn powder, and beef extract significantly improved cell growth. In terms of ε-PL productivity, yeast extract at 0.5% (w/v) gave the maximum yield (2.24 g/l), 115.4% higher than the control (1.04 g/l), followed by soybean powder (1.86 g/l) at 1% (w/v) and corn powder (1.72 g/l) at 1% (w/v). However, supplementation with beef extract inhibited ε-PL production. The optimal time for supplementation for all nutrients examined was at 16 h cultivation. The kinetics of yeast-extract-supplemented cultures showed enhanced cell growth and production duration. Thus, the most commonly used two-stage pH control fed-batch fermentation method was modified by omitting the pH 5.0-controlled period, and coupling the procedure with nutrient feeding in the pH 3.9-controlled phase. Using this process, by continuously feeding 0.5 g/h of yeast extract, soybean powder, or corn powder into cultures in a 30 L fermenter, the final ε-PL titer reached 28.2 g/l, 23.7 g/l, and 21.4 g/l, respectively, 91.8%, 61.2%, and 45.6% higher than that of the control (14.7 g/l). This describes a promising option for the mass production of ε-PL.

Granular activated carbon (GAC) was modified by microwave irradiation and electrical heating. The characters and toluene adsorption capacity of modified GAC were studied. The results showed that for microwave heating, with the temperature increasing, the activated carbon's ability of toluene adsorption and content of the surface basic functional group were increased, specific surface area was decreased. After heated at 850 degrees C, GAC had the highest ability for toluene adsorption, at 650 degrees C and 450 degrees C, the ability for toluene adsorption of GAC were similar. For the electrical heating, the same results were obtained. But the GAC modified with electrical heating had lower capacity of toluene adsorption than microwave modified GAC. The SEM photos showed that thermal modification made the porous structure of modified GAC smoother than original GAC, but the structure of GAC shrink at high temperature. Finally, all the experimental data and SEM photos were analyzed; it indicated that due to the difference of heating mechanism and heat transmission direction, the modified GAC have different characters.

Objective: To extract rabbit somatosensory evoked potentials (SEP), by using a new technique named independent component analysis., Method: The rabbit was narcotized and stimulated with 0.5 Hz electric pulse. Potentials at scalp was sampled at 3764 Hz. Response signals to repeated stimulations for 3 times mixed with background noise was acquired at the same collection point. Independent component analysis (ICA) for SEP was established. The mixed signals were decomposed by ICA to observe the independent components., Result: Independent SEP was acquired., Conclusion: A time lag of continuous signal source is suitable to SEP model. ICA can extract signals of SEP components.