Search

The pursuit of coherent radiation generation remains a central focus in advancing storage ring light sources. Despite the promise of laser modulation in achieving this goal, it brings about a noticeable decline in beam quality. Efforts to mitigate this decline have resulted in the proposal of demodulation schemes. However, implementing modulation and demodulation within the storage ring presents significant challenges due to dynamical and spatial constraints within straight sections. In this study, we propose a straightforward and easily implementable method for achieving reversible laser modulation in a storage ring. Notably, our approach circumvents the need for special storage ring requirements, such as lengthy straight sections or bypass section. Simulation results demonstrate a substantial restoration of beam quality following demodulation. This innovative scheme holds great promise for the realization of high repetition rate coherent storage ring light sources., Comment: 7 pages, 7 figures

Coherent synchrotron radiations (CSR) emitted by a high-brightness electron beam during transport in a bending magnet is a double-edged sword in electron accelerators. While CSR contributes to a stronger radiation field than the incoherent radiation, it simultaneously leads to degradation of the electron beam quality. Specifically, CSR effects manifest in increases of the beam energy spread and the projected emittance, and amplification of the microbunching instability. This paper presents analytical formulas for the CSR-induced microbunching instability gain and for the induced emittance growth in an arbitrary achromatic four-bend chicane with inclusion of both the steady-state and transient CSR effects. The analytical formulas are compared and show good agreement with Vlasov calculations and particle tracking simulations. The obtained analytical formulas are then applied to evaluate the CSR effects in the design of a general achromatic four-bend bunch compressor chicane, providing a quick estimate on the microbunching gain and the induced emittance growth. From the widely adopted symmetric C-shape chicane to a non-symmetric S-shape chicane, our analytical formulas offer insight into the evolution of the microbunching gain and the emittance growth with the variations of design parameters. In comparison to particle tracking simulations currently employed for CSR effect analyses, the analytical formulas presented in this paper significantly reduce the evaluation time, enabling systematic study of parametric dependencies with inclusion of CSR effects within specified design parameter ranges., Comment: 31 pages, 7 figures

High peak current electron beams are essential for x-ray free-electron lasers (FELs), and generally realized through multi-stage compression with symmetric C-shape four-bend chicanes. However, the coherent synchrotron radiations (CSR), emitted for wavelengths longer than or comparable to the length of the electron bunch during the compression, may degrade the beam quality and finally affect the FEL performance. In this Letter, we show that zero net CSR kick cannot be achieved in a symmetric C-chicane by using an explicit point-kick analysis of the CSR effects, which is responsible for significant emittance growth when pursuing a peak current of $\gtrsim$ 10 kiloamperes. A four-bend chicane with non-symmetric S-shape geometry that can self-cancel the CSR kicks is proposed to effectively suppress the emittance growth. Compared to the symmetric C-chicane, beams with three times higher peak current and similar emittance growth can be achieved with the S-chicane for typical FEL operation parameters. We believe that this study provides a viable way of producing high quality and short intense electron beams, benefiting future development of FELs and other types of accelerator-based scientific facilities.

The most significant advances in the accelerator-based light sources (i.e., x-ray free electron lasers) are driven by the production of the high final peak current in the last several decades. As a prerequisite to attain the proposed high brightness, the symmetric C-chicane bunch compressor is typically exploited due to its simplicity, efficiency, and natural dispersion-free feature at all orders. However, during bunch compression for a high peak current requirement, a main contributing factor to the transverse emittance degradation is the emission of the coherent synchrotron radiation (CSR). Suppressing this effect is necessary to preserve the beam phase-space quality. To this end, this paper presents an analysis of one-dimensional CSR point-kick and derives the cancellation conditions in terms of compression factor. The CSR cancelation conditions indicate an asymmetric geometric design. We demonstrate concrete schemes for asymmetric C- and S-chicanes, and verify the CSR cancelation conditions using integration methods and ELEGANT simulations. Furthermore, the proposed asymmetric C- and S-chicanes can drastically suppress the emittance growth compared with the symmetric ones with identical bunch compression goals.

In the fourth-generation storage ring light sources (4GLSs), associated with the extremely strong nonlinearities inherent in the multi-bend achromat design, the dynamic acceptance is usually small and it is difficult to implement traditional off-axis local-bump injection. To release the requirement on dynamic acceptance, on-axis longitudinal injection schemes have been explored. In this paper, we present a multi-objective optimization of longitudinal injection with a multi-frequency RF system, based on the parameters of the Southern Advanced Photon Source, a 4GLS proposed in China. We show that by treating the optimal bunch lengthening condition as an optimizing objective rather than a condition that must be satisfied, a plethora of feasible candidate solutions can be found, showing different trade-offs among multi-objectives. From these candidate solutions, one can find an optimal RF parameter setting that is most adapted to a specific 4GLS physics design and the available technical level of injection kicker. Especially, it would be feasible to realize longitudinal injection within a static bucket enabled by a double-frequency RF system, suggesting an attractive longitudinal injection option for 4GLSs.