362 results on '"Liu, Zheng‐Ying"'
Search Results
2. Seeding carbon nanotube microemulsions in elastomer films for hetero-structured porous stretchable composites
3. Structure-regenerated silk fibroin with boosted piezoelectricity for disposable and biodegradable oral healthcare device
4. In-situ construction of high-modulus nanospheres on elastomer fibers for linearity-tunable strain sensing
5. Double-layered and shape-stabilized phase change materials with enhanced thermal conduction and reversible thermochromism for solar thermoelectric power generation
6. Low-entropy structured wearable film sensor with piezoresistive-piezoelectric hybrid effect for 3D mechanical signal screening
7. Flexible shape-stabilized phase change materials with passive radiative cooling capability for thermal management
8. Achieving a Wide-Range Linear Piezoresistive Response in Electrowritten Soft–Hard Polymer Blends via Salami-Inspired Heterostructure Design
9. Tunable reversible deformation of semicrystalline polymer networks based on temperature memory effect
10. Formation of nanosheets-assembled porous polymer microspheres via the combination effect of polymer crystallization and vapor-induced phase separation
11. Boosting solar steam generation in dynamically tunable polymer porous architectures
12. Simulation and experimental studies on the formation and evolution of hierarchical crystalline structures at the multi-melt flow interface
13. Morphologies, interfacial interaction and mechanical performance of super-tough nanostructured PK/PA6 blends
14. A strain localization directed crack control strategy for designing MXene-based customizable sensitivity and sensing range strain sensors for full-range human motion monitoring
15. Robust polymer-based paper-like thermal interface materials with a through-plane thermal conductivity over 9 Wm−1K−1
16. Highly thermally conductive electrospun stereocomplex polylactide fibrous film dip-coated with silver nanowires
17. Thermally Conductive Magnetic Composite Phase Change Materials for Anisotropic Photo/Magnetic-to-Thermal Energy Conversion
18. Direct modification of polyketone resin for anion exchange membrane of alkaline fuel cells
19. Synthesis of thermoplastic cellulose grafted polyurethane from regenerated cellulose
20. Self-assembled core-shell polydopamine@MXene with synergistic solar absorption capability for highly efficient solar-to-vapor generation
21. Pore formation mechanism of oriented β polypropylene cast films during stretching and optimization of stretching methods: In-situ SAXS and WAXD studies
22. Dopamine-induced functionalization of cellulose nanocrystals with polyethylene glycol towards poly(L-lactic acid) bionanocomposites for green packaging
23. Vitrimers of polyolefin elastomer with physically cross-linked network
24. Electrically insulating, layer structured SiR/GNPs/BN thermal management materials with enhanced thermal conductivity and breakdown voltage
25. Oriented polypropylene cast films consisted of β-transcrystals induced by the nucleating agent self-assembly and its homogeneous membranes with high porosity
26. Tailoring co-continuous like morphology in blends with highly asymmetric composition by MWCNTs: Towards biodegradable high-performance electrical conductive poly(l-lactide)/poly(3-hydroxybutyrate-co-4-hydroxybutyrate) blends
27. Efficient Conversion of Cellulose to Thermoplastics by Mechanochemical Esterification
28. Polyethylene glycol/graphene oxide aerogel shape-stabilized phase change materials for photo-to-thermal energy conversion and storage via tuning the oxidation degree of graphene oxide
29. Constructing a special ‘sosatie’ structure to finely dispersing MWCNT for enhanced electrical conductivity, ultra-high dielectric performance and toughness of iPP/OBC/MWCNT nanocomposites
30. Effect of aspect ratio of multi-wall carbon nanotubes on the dispersion in ethylene-α-octene block copolymer and the properties of the Nanocomposites
31. Effect of temperature, crystallinity and molecular chain orientation on the thermal conductivity of polymers: a case study of PLLA
32. Electrically insulating POE/BN elastomeric composites with high through-plane thermal conductivity fabricated by two-roll milling and hot compression
33. Unique crystallization behaviors of isotactic polypropylene in the presence of MWCNT supported β nucleating agent: Lower temperature T(αβ)-T(βα) interval and fast cooling preferred formation of β crystals
34. Conductive thermoplastic vulcanizates (TPVs) based on polypropylene (PP)/ethylene-propylene-diene rubber (EPDM) blend: From strain sensor to highly stretchable conductor
35. Enhanced comprehensive performance of polyethylene glycol based phase change material with hybrid graphene nanomaterials for thermal energy storage
36. Investigation on the reactive processing of textile-ramie fiber reinforced anionic polyamide-6 composites
37. Hierarchical crystalline structures induced by temperature profile in HDPE bars during melt penetration process
38. Hierarchical crystalline structures induced by temperature profile in HDPE bars during melt penetration process
39. The molecular weight dependence of the crystallization behavior of four-arm poly(L-lactide)
40. Janus and Heteromodulus Elastomeric Fiber Mats Feature Regulable Stress Redistribution for Boosted Strain Sensing Performance
41. Morphology, interfacial and mechanical properties of polylactide/poly(ethylene terephthalate glycol) blends compatibilized by polylactide-g-maleic anhydride
42. New understanding for the formation of conductive network in the nanocomposites during the crystallization of matrix
43. Deformation-induced structure evolution of oriented β-polypropylene during uniaxial stretching
44. Effect of nano-silica on the phase inversion behavior of immiscible PA6/ABS blends
45. Unusual hierarchical structures of mini-injection molded isotactic polypropylene/ultrahigh molecular weight polyethylene blends
46. Janus and Heteromodulus Elastomeric Fiber Mats Feature Regulable Stress Redistribution for Boosted Strain Sensing Performance.
47. Scalable Flexible Phase Change Materials with a Swollen Polymer Network Structure for Thermal Energy Storage
48. Recent Advances in Multiresponsive Flexible Sensors towards E‐skin: A Delicate Design for Versatile Sensing
49. Shear field in the mold cavity of multimelt multi-injection molding revealed by the morphology distribution of a model polymer blend
50. Study of the morphology and temperature-resistivity effect of injection-molded iPP/HDPE/CB composites
Catalog
Books, media, physical & digital resources
Discovery Service for Jio Institute Digital Library
For full access to our library's resources, please sign in.