Search

Seismic observations show the Earth's inner core has significant and unexplained variation in seismic attenuation with position, depth and direction. Interpreting these observations is difficult without knowledge of the visco‐ or anelastic dissipation processes active in iron under inner core conditions. Here, a previously unconsidered attenuation mechanism is observed in zinc, a low pressure analog of hcp‐iron, during small strain sinusoidal deformation experiments. The experiments were performed in a deformation‐DIA combined with X‐radiography, at seismic frequencies (∼0.003–0.1 Hz), high pressure and temperatures up to ∼80% of melting temperature. Significant dissipation (0.077 ≤ Q−1(ω) ≤ 0.488) is observed along with frequency dependent softening of zinc's Young's modulus and an extremely small activation energy for creep (⩽7 kJ mol−1). In addition, during sinusoidal deformation the original microstructure is replaced by one with a reduced dislocation density and small, uniform, grain size. This combination of behavior collectively reflects a mode of deformation called "internal stress superplasticity"; this deformation mechanism is unique to anisotropic materials and activated by cyclic loading generating large internal stresses. Here we observe a new form of internal stress superplasticity, which we name as "elastic strain mismatch superplasticity." In it the large stresses are caused by the compressional anisotropy. If this mechanism is also active in hcp‐iron and the Earth's inner‐core it will be a contributor to inner‐core observed seismic attenuation and constrain the maximum inner‐core grain‐size to ≲10 km. Plain Language Summary: The Earth's inner‐core is the most remote and inaccessible part of our planet. Knowledge of the inner‐core's structure comes from interpretation of the information held in seismic waves that have passed through the inner‐core. These waves show measurable variation in wave speed and damping with depth. To investigate the wave damping in the inner‐core we performed experiments that mimicked the passage of seismic waves through zinc. Zinc was used as a low‐pressure analog because it has the same crystallographic structure as the iron in the inner‐core. In these experiments, we observed new behavior in the zinc samples that can only be explained by the behavior of different directions within the zinc crystal lattice. These we named "elastic strain mismatch superplasticity" and if the same phenomena occurs in the Earth's inner‐core it could explain the seismic observations. Key Points: Zinc, a low pressure analog for hcp‐iron, deforms by internal stress superplasticity during small amplitude sinusoidal‐strain deformationInternal stress superplasticity due to mechanical oscillations has not been previously reportedInternal stress superplasticity is another attenuation mechanism that could be active in the Earth's inner‐core [ABSTRACT FROM AUTHOR]

Ultra high pressure (UHP) metamorphism observed in continental terranes implies that continental crust can subduct to ~40 kbar before exhuming to the surface. This process is one of the least understood and widely debated parts of the orogenic cycle. The dominantly felsic composition of UHP continental terranes means that many petrology‐based techniques for determining peak pressures and temperatures are often not possible. In such cases, the detection of UHP conditions depends on the preservation of coesite, a rarely preserved mineral in exhumed UHP terranes as it rapidly transforms to quartz on decompression. Consequently, the qualitative identification of palisade quartz microstructures that form during the retrograde transformation of coesite to quartz is often used to identify UHP terranes. In this study, we conduct electron backscatter diffraction and misorientation analysis of palisade quartz inclusions in the coesite‐bearing pyrope quartzite from the Dora Maira massif in the Alps, and matrix‐scale palisade quartz in the Polokongka La granite from Tso Morari in the Ladakh Himalaya, in order to quantitatively define crystallographic characteristics of quartz after coesite. The repeatability of our observations in two unrelated occurrences of UHP rocks supports our interpretation that the following features provide a systematic and predictable set of criteria to identify the coesite to quartz transition: (1) Quartz crystallographic orientations define spatially and texturally distinct subdomains of palisade quartz grains with 'single crystal' orientations defined by distinct c‐axis point maxima. (2) Adjacent subdomains are misorientated with respect to each other by a misorientation angle/axis of 90°/. (3) Within each subdomain, palisade quartz grain boundaries commonly have intra‐ and inter‐granular misorientations of 60°/[0001], consistent with the dauphiné twin law. Our observations imply that the coesite‐quartz transformation is crystallographically controlled by the epitaxial nucleation of palisade quartz on the former coesite grain, specifically on potential coesite twin planes such as (1‐01) and (021). [ABSTRACT FROM AUTHOR]