Search

• Small molecules have been proposed as alternatives to regenerate bone tissue. • Small molecule drug dose can often be reduced while still achieving effective therapeutic. • The potential to improve bone repair by making it safer, easier, and more cost-effective with the use of a small molecule delivered in the short-term. Osteogenic small molecules have been adapted as one of the encouraging approaches to regenerate bone tissue. Small molecules used long term will usually result in adverse effects. A novel approach is short-term treatment with osteogenic small molecules. Demonstrating effectiveness for regenerating bone with a short-term treatment or a single-dose administration of osteogenic small molecules could enhance safety by reducing adverse effects. Over the past few years, many small molecules with the potential of regenerating bone tissue have been reported when used for short-term or single-dose administration. Here, I review the relevant literature, paying particular attention to prospects for small molecule-mediated bone regeneration with short-term exposure. [ABSTRACT FROM AUTHOR]

Highlights: [•] Regenerative engineering has been recently proposed to regenerate complex tissue. [•] Therapeutic proteins have many limitations for their use in regenerating tissues. [•] Small-molecule-based therapeutics is emerging as an alternative strategy. [•] Small molecules may represent the next generation in musculoskeletal regenerative medicine. [ABSTRACT FROM AUTHOR]

Abstract: Over the past several decades, recombinant human bone morphogenetic proteins (rhBMPs) have been the most extensively studied and widely used osteoinductive agents for clinical bone repair. Since rhBMP-2 and rhBMP-7 were cleared by the U.S. Food and Drug Administration for certain clinical uses, millions of patients worldwide have been treated with rhBMPs for various musculoskeletal disorders. Current clinical applications include treatment of long bone fracture non-unions, spinal surgeries, and oral maxillofacial surgeries. Considering the growing number of recent publications related to clincal research of rhBMPs, there exists enormous promise for these proteins to be used in bone regenerative medicine. The authors take this opportunity to review the rhBMP literature paying specific attention to the current applications of rhBMPs in bone repair and spine surgery. The prospective future of rhBMPs delivered in combination with tissue engineered scaffolds is also reviewed. [Copyright &y& Elsevier]

Osteoblast cell adhesion on biomaterials is an important goal for implants to be useful in bone regeneration technologies. The adhesion of osteoblastic cells to biomaterials has been investigated in the field of bone regenerative engineering. Previous work from our group demonstrated that osteoblastic cells adhering to biodegradable biomaterials require the expression of integrins on the cell surface. However, the underlying molecular signaling mechanism is still not fully clear. We report here that cyclic adenosine monophosphate (cAMP), a small signaling molecule, regulates osteoblast cell adhesion to biomaterial surfaces. We used an in vitro cell adhesion assay to demonstrate that at 0.1 mM, 8-Br-cAMP, a cell-permeable cAMP analog, significantly enhances osteoblast-like cells' (MC3T3-E1) adherence to biomaterials. Moreover, we demonstrate that a commonly used cAMP-elevating agent, forskolin, promotes cell adhesion similar to that of the cell permeable cAMP analog. By using different target-specific cAMP analogs: 8-CPT-2Me-cAMP which specifically activates exchange protein activated by cAMP (Epac), and 6-Bnz-cAMP which specifically activates protein kinase A (PKA), we observed that the PKA signaling pathway plays a dominant role in this process. Thus, this report suggests a new method to enhance osteoblast cell adhesion on biodegradable biomaterials for bone regenerative engineering applications. © 2010 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 29:602-608, 2011 [ABSTRACT FROM AUTHOR]

Cytoplasmic dynein is the multisubunit motor protein for retrograde movement of diverse cargoes to microtubule minus ends. Here, we investigate the function of dynein variants, defined by different intermediate chain (IC) isoforms, by expressing fluorescent ICs in neuronal cells. Green fluorescent protein (GFP)--IC incorporates into functional dynein complexes that copurify with membranous organelles. In living PC12 cell neurites, GFP--dynein puncta travel in both the anterograde and retrograde directions. In cultured hippocampal neurons, neurotrophin receptor tyrosine kinase B (TrkB) signaling endosomes are transported by cytoplasmic dynein containing the neuron-specific IC-1B isoform and not by dynein containing the ubiquitous IC-2C isoform. Similarly, organelles containing TrkB isolated from brain by immuno-affinity purification also contain dynein with IC-1 but not IC-2 isoforms. These data demonstrate that the IC isoforms define dynein populations that are selectively recruited to transport distinct cargoes. [ABSTRACT FROM AUTHOR]

The cytoplasmic dynein 1 cargo binding domain is formed by five subunits including the intermediate chain and the DYNLT, DYNLL, and DYNLRB light chain families. Six isoforms of the intermediate chain and two isoforms of each of the light chain families have been identified in mammals. There is evidence that different subunit isoforms are involved in regulating dynein function, in particular linking dynein to different cargoes. However, it is unclear how the subunit isoforms are assembled or if there is any specificity to their interactions. Co-immunoprecipitation using DYNLT-specific antibodies reveals that dynein complexes with DYNLT light chains also contain the DYNLL and DYNLRB light chains. The DYNLT light chains, but not DYNLL light chains, associate exclusively with the dynein complex. Yeast two-hybrid and co-immunoprecipitation assays demonstrate that both members of the DYNLT family are capable of forming homodimers and heterodimers. In addition, both homodimers of the DYNLT family bind all six intermediate chain isoforms. However, DYNLT heterodimers do not bind to the intermediate chain. Thus, whereas all combinations of DYNLT light chain dimers can be made, not all of the possible combinations of the isoforms are utilized during the assembly of the dynein complex. [ABSTRACT FROM AUTHOR]

Cytoplasmic dynein is the motor protein responsible for the intracellular transport of various organelles and other cargoes toward microtubule minus ends. However, it remains to be determined how dynein is regulated to accomplish its varied roles. The dynein complex contains six subunits, including three classes of light chains. The two isoforms of the DYNLT (Tctex1) family of light chains, DYNLT1 and DYNLT3, have been proposed to link dynein to specific cargoes. However, no specific binding partner had been found for the DYNLT3 light chain. We find that DYNLT3 binds to Bub3, a spindle checkpoint protein. Bub3 binds exclusively to DYNLT3 and not to the other dynein light chains. Glutathione S-transferase pull-down and co-immunoprecipitation assays demonstrate that Bub3 interacts with the cytoplasmic dynein complex. DYNLT3 is present on kinetochores at prometaphase, but not later mitotic stages, demonstrating that this dynein light chain, like Bub3 and other checkpoint proteins, is depleted from the kinetochore during chromosome alignment. Knockdown of DYNLT3 with small interference RNA increases the mitotic index, in particular, the number of cells in prophase/prometaphase. These results demonstrate that dynein binds directly to a component of the spindle checkpoint complex through the DYNLT3 light chain. Thus, DYNLT3 contributes to dynein cargo binding specificity. These data also suggest that the subpopulation of dynein, containing the DYNLT3 light chain, may be important for chromosome congression, in addition to having a role in the transport of checkpoint proteins from the kinetochore to the spindle pole. [ABSTRACT FROM AUTHOR]

Cytoplasmic dynein is the multisubunit protein complex responsible for many microtubule-based intracellular movements. Its cargo binding domain consists of dimers of five subunits: the intermediate chains, the light intermediate chains, and the Tctex1, Roadblock, and LC8 light chains. The intermediate chains have a key role in the dynein complex. They bind the three light chains and the heavy chains, which contain the motor domains, but little is known about how the two intermediate chains interact. There are six intermediate chain isoforms, and it has been hypothesized that different isoforms may regulate specific dynein functions. However, there are little data on the potential combinations of the intermediate chain isoforms in the dynein complexes. We used co-immunoprecipitation analyses to demonstrate that all combinations of homo- and heterodimers of the six intermediate chains are possible. Therefore the formation of dynein complexes with different combinations of isoforms is not limited by interaction between the various intermediate chains. We further sought to identify the domain necessary for the dimerization of the intermediate chains. Analysis of a series of truncation and deletion mutants showed that a 61-amino-acid region is necessary for dimerization of the intermediate chain. This region does not include the N-terminal coiled-coil, the C-terminal WD repeat domain, or the three different binding sites for the Tctex1, LCS, and Roadblock light chains. Analytical gel filtration and covalent cross-linking of purified recombinant polypeptides further demonstrated that the intermediate chains can dimerize in vitro in the absence of the light chains. [ABSTRACT FROM AUTHOR]

The tumor suppressor protein p53 is known to undergo cytoplasmic dynein-dependent nuclear translocation in response to DNA damage. However, the molecular link between p53 and the minus end-directed microtubule motor dynein complex has not been described. We report here that the 8-kDa light chain (LC8) of dynein binds to p53-binding protein 1 (53BP1). The LC8-binding domain was mapped to a short peptide segment immediately N-terminal to the kinetochore localization region of 53BP1. The LC8-binding domain is completely separated from the p53-binding domain in 53BP1. Therefore, 53BP1 can potentially act as an adaptor to assemble p53 to the dynein complex. Unlike other known LC8-binding proteins, 53BP1 contains two distinct LC8-binding motifs that are arranged in tandem. We further showed that 53BP1 can directly associate with the dynein complex. Disruption of the interaction between LC8 and 53BP1 in vivo prevented DNA damage-induced nuclear accumulation of p53. These data illustrate that LC8 is able to function as a versatile accepter to link a wide spectrum of molecular cargoes to the dynein motor. [ABSTRACT FROM AUTHOR]

The 8-kDa light chain of dynein (DLC8) is ubiquitously expressed in various cell types. Other than serving as a light chain of the dynein complexes, this highly conserved protein has been shown to bind a larger number of proteins with diverse biological functions. DLC8 forms a homodimer via three-dimensional domain swapping of an internal β-strand (the β2-strand) at neutral pH. The protein undergoes non-reversible dimer-tomonomer dissociation when the pH value of the protein solution decreases. The three-dimensional structure of the DLC8 monomer determined by NMR spectroscopy at pH 3.0 showed that the protein is well folded. The major conformational change accompanied by dimer dissociation is in the β2-strand of the protein, which undergoes transition from a β-strand to a nascent α-helix. The monomer form of DLC8 is not capable of binding to target proteins. Insertion of two flexible amino acid residues in the tight β1/β2-1oop dramatically stabilized the monoruer conformation of the protein. NMR studies showed that the mutation altered the conformation as well as the three-dimensional domain swapping-mediated assembly of the DLC8 dimer. The mutant DLC8 was unable to bind to its targets even at physiological pH. The threedimensional structure of the mutant protein in its monomeric form provides the structural basis of the mutation-induced stabilization of the monomer conformation. Based on the experimental data, we conclude that the formation of the β2-strand swapping-mediated dimer is mandatory for the structure and function of DLC8. We further note that the DLC8 dimer represents a novel mode of three-dimensional domain swapping. [ABSTRACT FROM AUTHOR]

Describes novel purification methods for the recombinant apoptosis-linked gene product or ALG-2. Characterization of ALG-2 as a member of the calpain small subunity family of calcium-binding protein; Construction of an ALG-mutant which showed that ALG-2 possesses two strong calcium-binding sites; Gel filtration and cross-linking experiments.

Piezoelectric biomaterials can generate piezoelectrical charges in response to mechanical activation. These generated charges can directly stimulate bone regeneration by triggering signaling pathway that is important for regulating osteogenesis of cells seeded on the materials. On the other hand, mechanical forces applied to the biomaterials play an important role in bone regeneration through the process called mechanotransduction. While mechanical force and electrical charges are both important contributing factors to bone tissue regeneration, they operate through different underlying mechanisms. The utilizations of piezoelectric biomaterials have been explored to serve as self-charged scaffolds which can promote stem cell differentiation and the formation of functional bone tissues. However, it is still not clear how mechanical activation and electrical charge act together on such a scaffold and which factors play more important role in the piezoelectric stimulation to induce osteogenesis. In our study, we found Poly(l-lactic acid) (PLLA)-based piezoelectric scaffolds with higher piezoelectric charges had a more pronounced osteoinductive effect than those with lower charges. This provided a new mechanistic insight that the observed osteoinductive effect of the piezoelectric PLLA scaffolds is likely due to the piezoelectric stimulation they provide, rather than mechanical stimulation alone. Our findings provide a crucial guide for the optimization of piezoelectric material design and usage. [ABSTRACT FROM AUTHOR]

Bone grafting procedures have become increasingly common in the United States, with approximately 500,000 cases occurring each year at a societal cost exceeding $2.4 billion. Recombinant human bone morphogenetic proteins (rhBMPs) are therapeutic agents that have been widely used by orthopedic surgeons to stimulate bone tissue formation alone and when paired with biomaterials. However, significant limitations such as immunogenicity, high production cost, and ectopic bone growth from these therapies remain. Therefore, efforts have been made to discover and repurpose osteoinductive small-molecule therapeutics to promote bone regeneration. Previously, we have demonstrated that a single-dose treatment with the small-molecule forskolin for just 24 h induces osteogenic differentiation of rabbit bone marrow-derived stem cells in vitro, while mitigating adverse side effects attributed with prolonged small-molecule treatment schemes. In this study, we engineered a composite fibrin-PLGA [poly(lactide-co-glycolide)]-sintered microsphere scaffold for the localized, short-term delivery of the osteoinductive small molecule, forskolin. In vitro characterization studies showed that forskolin released out of the fibrin gel within the first 24 h and retained its bioactivity toward osteogenic differentiation of bone marrow-derived stem cells. The forskolin-loaded fibrin-PLGA scaffold was also able to guide bone formation in a 3-mo rabbit radial critical-sized defect model comparable to recombinant human bone morphogenetic protein-2 (rhBMP-2) treatment, as demonstrated through histological and mechanical evaluation, with minimal systemic off-target side effects. Together, these results demonstrate the successful application of an innovative small-molecule treatment approach within long bone critical-sized defects. [ABSTRACT FROM AUTHOR]

Repair and regeneration of human tissues and organs using biomaterials, cells, and/or growth factors is a great challenge for tissue engineers and surgeons. The convergence of advanced materials science, nanotechnology, stem cell science, and developmental biology, which we define as Regenerative Engineering, represents the next multidisciplinary paradigm to engineer complex tissues. One of the grand challenges in this field is to mimic closely the hierarchical architecture and properties of the extracellular matrices (ECM) of the native tissues. A bio-inspired approach to creating biomaterials with nanoscale topographical features, micro- and macroscale gradient structures, and biological domains to interact with target growth factors and cells is key to overcoming this challenge for successful tissue regeneration. Furthermore, the healing and repair of diseased musculoskeletal tissues rely on many signaling pathways, involving numerous growth factors and their receptors. Thus, pharmacological manipulation of the signaling pathways with bioactive molecules is an important component of tissue regeneration. This review summarizes current strategies to develop advanced nanofibrous polymer-based scaffolds via electrospinning, their applications in regenerating human musculoskeletal tissues, and the use of polymer nanofibers to deliver growth factors or small molecules for regenerative medicine. [ABSTRACT FROM AUTHOR]

The secretome is defined as the set of molecules and biological factors that are secreted by cells into the extracellular space. In the past decade, secretome-based therapies have emerged as a promising approach to overcome the limitations associated with cell-based therapies for tissue and organ regeneration. Considering the growing number of recent publications related to secretome-based therapies, this review takes a step-by-step engineering approach to evaluate the role of the stem cell secretome in regenerative engineering. We discuss the functional benefits of the secretome, the techniques used to engineer the secretome and tailor its therapeutic effects, and the delivery systems and strategies that have been developed to use the secretome for tissue regeneration. The stem cell secretome has emerged as a promising cell-free alternative to cell-based therapies. Secretome-based therapies have many of the therapeutic benefits of cell-based therapies, while obviating many of the safety and logistical concerns associated with directly using stem cells. The secretome is highly dynamic and its therapeutic effects can be engineered and customized according to its intended application. Delivery systems and strategies have been developed to harness the therapeutic benefits of the secretome for the repair and regeneration of various tissues and organs. [ABSTRACT FROM AUTHOR]

Bone scientists are actively investigating a range of methods to promote skeletal tissue regeneration. A review of recent literature has revealed that several ions are uniquely capable of inducing stem cell differentiation down desired lineages. There exists enormous promise for these ions to be used in bone regenerative medicine. Given that these ions can be released from biodegradable polymeric materials, their long-term delivery can be achieved through a variety of controlled-release strategies compared with the relatively few options available for expensive and fragile polypeptide-based growth factors. In this review, we highlight the developments in using ions in conjunction with biomaterials for bone regeneration. [ABSTRACT FROM AUTHOR]

Measuring vital physiological pressures is important for monitoring health status, preventing the buildup of dangerous internal forces in impaired organs, and enabling novel approaches of using mechanical stimulation for tissue regeneration. Pressure sensors are often required to be implanted and directly integrated with native soft biological systems. Therefore, the devices should be flexible and at the same time biodegradable to avoid invasive removal surgery that can damage directly interfaced tissues. Despite recent achievements in degradable electronic devices, there is still a tremendous need to develop a force sensorwhich only relies on safe medicalmaterials and requires no complex fabrication process to provide accurate information on important biophysiological forces. Here,we present a strategy formaterial processing, electromechanical analysis, device fabrication, and assessment of a piezoelectric Poly-L-lactide (PLLA) polymer to create a biodegradable, biocompatible piezoelectric force sensor, which only employs medical materials used commonly in Food and Drug Administration-approved implants, for the monitoring of biological forces. We show the sensor can precisely measure pressures in a wide range of 0-18 kPa and sustain a reliable performance for a period of 4 d in an aqueous environment. We also demonstrate this PLLA piezoelectric sensor can be implanted inside the abdominal cavity of a mouse to monitor the pressure of diaphragmatic contraction. This piezoelectric sensor offers an appealing alternative to present biodegradable electronic devices for the monitoring of intraorgan pressures. The sensor can be integrated with tissues and organs, forming self-sensing bionic systems to enable many exciting applications in regenerative medicine, drug delivery, and medical devices. [ABSTRACT FROM AUTHOR]

Delivering drugs specifically to bone tissue is very challenging due to the architecture and structure of bone tissue. Poly(lactic- co -glycolic acid) (PLGA)-based nanoparticles (NPs) hold great promise for the delivery of therapeutics to bone tissue. The goal of the present research was to formulate a PLGA-based NP drug delivery system for bone tissue exclusively. Since poly-aspartic acids (poly-Asp) peptide sequence has been shown to bind to hydroxyapatite (HA), and has been suggested as a molecular tool for bone-targeting applications, we fabricated PLGA-based NPs linked with poly-Asp peptide sequence. Nanoparticles made of methoxy – poly(ethylene glycol) (PEG)-PLGA and maleimide-PEG-PLGA were prepared using a water-in-oil-in-water double emulsion and solvent evaporation method. Fluorescein isothiocyanate (FITC)-tagged poly-Asp peptide was conjugated to the surface of the nanoparticles via the alkylation reaction between the sulfhydryl groups at the N-terminal of the peptide and the C C double bond of maleimide at one end of the polymer chain to form thioether bonds. The conjugation of FITC-tagged poly-Asp peptide to PLGA NPs was confirmed by NMR analysis and fluorescent microscopy. The developed nanoparticle system is highly aqueous dispersible with an average particle size of ∼80 nm. In vitro binding analyses demonstrated that FITC-poly-Asp NPs were able to bind to HA gel as well as to mineralized matrices produced by human mesenchymal stem cells and mouse bone marrow stromal cells. Using a confocal microscopy technique, an ex vivo binding study of mouse major organ ground sections revealed that the FITC-poly-Asp NPs were able to bind specifically to the bone tissue. In addition, proliferation studies indicated that our FITC-poly-Asp NPs did not induce cytotoxicity to human osteoblast-like MG63 cell lines. Altogether, these promising results indicated that this nanoscale targeting system was able to bind to bone tissue specifically and might have a great potential for bone disease therapy in clinical applications. [ABSTRACT FROM AUTHOR]

With greater than 500,000 orthopaedic procedures performed in the United States each year requiring a bone graft, the development of novel graft materials is necessary. We report that some porous polymer/ceramic composite scaffolds possess intrinsic osteoinductivity as shown through their capacity to induce in vivo host osteoid mineralization and in vitro stem cell osteogenesis making them attractive synthetic bone graft substitutes. It was discovered that certain low crystallinity ceramics partially dissociate into simple signaling molecules (i.e., calcium and phosphate ions) that induce stem cells to endogenously produce their own osteoinductive proteins. Review of the literature has uncovered a variety of simple signaling molecules (i.e., gases, ions, and redox reagents) capable of inducing other desirable stem cell differentiation through endogenous growth factor production. Inductive simple signaling molecules, which we have termed inducerons, represent a paradigm shift in the field of regenerative engineering where they can be utilized in place of recombinant protein growth factors. [ABSTRACT FROM AUTHOR]

Highlights: [•] Regenerative engineering has been recently proposed to regenerate skeletal tissue. [•] Regenerative small molecules play a vital role in bone regenerative engineering. [•] Numerous small molecules have been recently discovered for bone regeneration. [•] Polymeric scaffolds play an important role to delivery small molecules in vivo. [Copyright &y& Elsevier]

The retrograde transport of Trk-containing endosomes from the axon to the cell body by cytoplasmic dynein is necessary for axonal and neuronal survival. We investigated the recruitment of dynein to signaling endosomes in rat embryonic neurons and PC 12 cells. We identified a novel phosphoserine on the dynein intermediate chains (ICs), and we observed a time-dependent neurotrophin-stimulated increase in intermediate chain phosphorylation on this site in both cell types. Pharmacological studies, overexpression of constitutively active MAP kinase kinase, and an in vitro assay with recombinant proteins demonstrated that the intermediate chains are phosphorylated by the MAP kinase ERK1/2, extracellular signal-regulated kinase, a major downstream effector of Trk. Live cell imaging with fluorescently tagged IC mutants demonstrated that the dephosphomimic mutants had significantly reduced colocalization with Trk and Rab7, but not a mitochondrial marker. The phosphorylated intermediate chains were enriched on immunoaffinity-purified Trk-containing organelles. Inhibition of ERK reduced the amount of phospho-IC and the total amount of dynein that copurified with the signaling endosomes. In addition, inhibition of ERK1/2 reduced the motility of Rab7- and TrkB-containing endosomes and the extent of their colocalization with dynein in axons. NGF-dependent survival of sympathetic neurons was significantly reduced by the overexpression of the dephospho-mimic mutant IC-1B-S80A, but not WT IC-1B, further demonstrating the functional significance of phosphorylation on this site. These results demonstrate that neurotrophin binding to Trk initiates the recruitment of cytoplasmic dynein to signaling endosomes through ERK1/2 phosphorylation of intermediate chains for their subsequent retrograde transport in axons. [ABSTRACT FROM AUTHOR]