Search

We determine the energy splitting of the conduction-band valleys in two-dimensional electrons confined in silicon metal oxide semiconductor Hall-bar transistors. These silicon metal oxide semiconductor Hall bars are made by advanced semiconductor manufacturing on 300 mm silicon wafers and support a two-dimensional electron gas of high quality with a maximum mobility of 17.6×103 cm2/Vs and minimum percolation density of 3.45×1010 cm-2. Because of the low disorder, we observe beatings in the Shubnikov-de Haas oscillations that arise from the energy splitting of the two low-lying conduction band valleys. From the analysis of the oscillations beating patterns up to T=1.7 K, we estimate a maximum valley splitting of ?EVS=8.2 meV at a density of 6.8×1012 cm-2. Furthermore, the valley splitting increases with density at a rate consistent with theoretical predictions for a near-ideal semiconductor-oxide interface., QCD/Scappucci Lab, QuTech

Full-scale quantum computers require the integration of millions of qubits, and the potential of using industrial semiconductor manufacturing to meet this need has driven the development of quantum computing in silicon quantum dots. However, fabrication has so far relied on electron-beam lithography and, with a few exceptions, conventional lift-off processes that suffer from low yield and poor uniformity. Here we report quantum dots that are hosted at a 28Si/28SiO2 interface and fabricated in a 300 mm semiconductor manufacturing facility using all-optical lithography and fully industrial processing. With this approach, we achieve nanoscale gate patterns with excellent yield. In the multi-electron regime, the quantum dots allow good tunnel barrier control—a crucial feature for fault-tolerant two-qubit gates. Single-spin qubit operation using magnetic resonance in the few-electron regime reveals relaxation times of over 1 s at 1 T and coherence times of over 3 ms., correction DOI 10.1038/s41928-022-00772-4 D. Correas-Serrano is the corrected in the HTML and PDF versions of the article, QCD/Vandersypen Lab, QuTech, BUS/TNO STAFF, QCD/Scappucci Lab, QN/Veldhorst Lab, QN/Vandersypen Lab

We demonstrate a 36 × 36 gate electrode crossbar that supports 648 narrow-channel field effect transistors (FET) for gate-defined quantum dots, with a quadratic increase in quantum dot count upon a linear increase in control lines. The crossbar is fabricated on an industrial 28Si-MOS stack and shows 100% FET yield at cryogenic temperature. We observe a decreasing threshold voltage for wider channel devices and obtain a normal distribution of pinch-off voltages for nominally identical tunnel barriers probed over 1296 gate crossings. Macroscopically across the crossbar, we measure an average pinch-off of 1.17 V with a standard deviation of 46.8 mV, while local differences within each unit cell indicate a standard deviation of 23.1 mV. These disorder potential landscape variations translate to 1.2 and 0.6 times the measured quantum dot charging energy, respectively. Such metrics provide means for material and device optimization and serve as guidelines in the design of large-scale architectures for fault-tolerant semiconductor-based quantum computing., QCD/Scappucci Lab, QuTech, BUS/Quantum Delft, QCD/Sebastiano Lab, Quantum Circuit Architectures and Technology, QN/Veldhorst Lab

Electron spins in Si/SiGe quantum wells suffer from nearly degenerate conduction band valleys, which compete with the spin degree of freedom in the formation of qubits. Despite attempts to enhance the valley energy splitting deterministically, by engineering a sharp interface, valley splitting fluctuations remain a serious problem for qubit uniformity, needed to scale up to large quantum processors. Here, we elucidate and statistically predict the valley splitting by the holistic integration of 3D atomic-level properties, theory and transport. We find that the concentration fluctuations of Si and Ge atoms within the 3D landscape of Si/SiGe interfaces can explain the observed large spread of valley splitting from measurements on many quantum dot devices. Against the prevailing belief, we propose to boost these random alloy composition fluctuations by incorporating Ge atoms in the Si quantum well to statistically enhance valley splitting., BUS/Quantum Delft, QCD/Scappucci Lab, QCD/Vandersypen Lab, BUS/TNO STAFF, QN/Vandersypen Lab

We demonstrate a 36 × 36 gate electrode crossbar that supports 648 narrow-channel field effect transistors (FET) for gate-defined quantum dots, with a quadratic increase in quantum dot count upon a linear increase in control lines. The crossbar is fabricated on an industrial 28Si-MOS stack and shows 100% FET yield at cryogenic temperature. We observe a decreasing threshold voltage for wider channel devices and obtain a normal distribution of pinch-off voltages for nominally identical tunnel barriers probed over 1296 gate crossings. Macroscopically across the crossbar, we measure an average pinch-off of 1.17 V with a standard deviation of 46.8 mV, while local differences within each unit cell indicate a standard deviation of 23.1 mV. These disorder potential landscape variations translate to 1.2 and 0.6 times the measured quantum dot charging energy, respectively. Such metrics provide means for material and device optimization and serve as guidelines in the design of large-scale architectures for fault-tolerant semiconductor-based quantum computing., QCD/Scappucci Lab, BUS/Quantum Delft, QCD/Sebastiano Lab, Quantum Circuit Architectures and Technology, QN/Veldhorst Lab

We determine the energy splitting of the conduction-band valleys in two-dimensional electrons confined in silicon metal oxide semiconductor Hall-bar transistors. These silicon metal oxide semiconductor Hall bars are made by advanced semiconductor manufacturing on 300 mm silicon wafers and support a two-dimensional electron gas of high quality with a maximum mobility of 17.6×103 cm2/Vs and minimum percolation density of 3.45×1010 cm-2. Because of the low disorder, we observe beatings in the Shubnikov-de Haas oscillations that arise from the energy splitting of the two low-lying conduction band valleys. From the analysis of the oscillations beating patterns up to T=1.7 K, we estimate a maximum valley splitting of ?EVS=8.2 meV at a density of 6.8×1012 cm-2. Furthermore, the valley splitting increases with density at a rate consistent with theoretical predictions for a near-ideal semiconductor-oxide interface., QCD/Scappucci Lab

Full-scale quantum computers require the integration of millions of qubits, and the potential of using industrial semiconductor manufacturing to meet this need has driven the development of quantum computing in silicon quantum dots. However, fabrication has so far relied on electron-beam lithography and, with a few exceptions, conventional lift-off processes that suffer from low yield and poor uniformity. Here we report quantum dots that are hosted at a 28Si/28SiO2 interface and fabricated in a 300 mm semiconductor manufacturing facility using all-optical lithography and fully industrial processing. With this approach, we achieve nanoscale gate patterns with excellent yield. In the multi-electron regime, the quantum dots allow good tunnel barrier control—a crucial feature for fault-tolerant two-qubit gates. Single-spin qubit operation using magnetic resonance in the few-electron regime reveals relaxation times of over 1 s at 1 T and coherence times of over 3 ms., correction DOI 10.1038/s41928-022-00772-4 D. Correas-Serrano is the corrected in the HTML and PDF versions of the article, QCD/Vandersypen Lab, BUS/TNO STAFF, QCD/Scappucci Lab, QN/Veldhorst Lab, QN/Vandersypen Lab

Topological superconductivity can be engineered in semiconductors with strong spin-orbit interaction coupled to a superconductor. Experimental advances in this field have often been triggered by the development of new hybrid material systems. Among these, two-dimensional electron gases (2DEGs) are of particular interest due to their inherent design flexibility and scalability. Here, we discuss results on a 2D platform based on a ternary 2DEG (InSbAs) coupled to in situ grown aluminum. The spin-orbit coupling in these 2DEGs can be tuned with the As concentration, reaching values up to 400 meV Å, thus exceeding typical values measured in its binary constituents. In addition to a large Landé g-factor of ∼55 (comparable to that of InSb), we show that the clean superconductor-semiconductor interface leads to a hard induced superconducting gap. Using this new platform, we demonstrate the basic operation of phase-controllable Josephson junctions, superconducting islands, and quasi-1D systems, prototypical device geometries used to study Majorana zero modes., Green Open Access added to TU Delft Institutional Repository ‘You share, we take care!’ – Taverne project https://www.openaccess.nl/en/you-share-we-take-care Otherwise as indicated in the copyright section: the publisher is the copyright holder of this work and the author uses the Dutch legislation to make this work public., QRD/Goswami Lab, QuTech, BUS/TNO STAFF, QCD/Scappucci Lab

We report on a systematic analysis of phosphorus diffusion in silicon on insulator thin film via spin-on-dopant process (SOD). This method is used to provide an impurity source for semiconductor junction fabrication. The dopant is first spread into the substrate via SOD and then diffused by a rapid thermal annealing process. The dopant concentration and electron mobility were characterized at room and low temperature by four-probe and Hall bar electrical measurements. Time-of-flight-secondary ion mass spectroscopy was performed to estimate the diffusion profile of phosphorus for different annealing treatments. We find that a high phosphorous concentration (greater than 1020 atoms cm-3) with a limited diffusion of other chemical species and allowing to tune the electrical properties via annealing at high temperature for short time. The ease of implementation of the process, the low cost of the technique, the possibility to dope selectively and the uniform doping manufactured with statistical process control show that the methodology applied is very promising as an alternative to the conventional doping methods for the implementation of optoelectronic devices., QCD/Scappucci Lab

Topological superconductivity can be engineered in semiconductors with strong spin-orbit interaction coupled to a superconductor. Experimental advances in this field have often been triggered by the development of new hybrid material systems. Among these, two-dimensional electron gases (2DEGs) are of particular interest due to their inherent design flexibility and scalability. Here, we discuss results on a 2D platform based on a ternary 2DEG (InSbAs) coupled to in situ grown aluminum. The spin-orbit coupling in these 2DEGs can be tuned with the As concentration, reaching values up to 400 meV Å, thus exceeding typical values measured in its binary constituents. In addition to a large Landé g-factor of ∼55 (comparable to that of InSb), we show that the clean superconductor-semiconductor interface leads to a hard induced superconducting gap. Using this new platform, we demonstrate the basic operation of phase-controllable Josephson junctions, superconducting islands, and quasi-1D systems, prototypical device geometries used to study Majorana zero modes., Green Open Access added to TU Delft Institutional Repository ‘You share, we take care!’ – Taverne project https://www.openaccess.nl/en/you-share-we-take-care Otherwise as indicated in the copyright section: the publisher is the copyright holder of this work and the author uses the Dutch legislation to make this work public., QRD/Goswami Lab, BUS/TNO STAFF, QCD/Scappucci Lab

We report on a systematic analysis of phosphorus diffusion in silicon on insulator thin film via spin-on-dopant process (SOD). This method is used to provide an impurity source for semiconductor junction fabrication. The dopant is first spread into the substrate via SOD and then diffused by a rapid thermal annealing process. The dopant concentration and electron mobility were characterized at room and low temperature by four-probe and Hall bar electrical measurements. Time-of-flight-secondary ion mass spectroscopy was performed to estimate the diffusion profile of phosphorus for different annealing treatments. We find that a high phosphorous concentration (greater than 1020 atoms cm-3) with a limited diffusion of other chemical species and allowing to tune the electrical properties via annealing at high temperature for short time. The ease of implementation of the process, the low cost of the technique, the possibility to dope selectively and the uniform doping manufactured with statistical process control show that the methodology applied is very promising as an alternative to the conventional doping methods for the implementation of optoelectronic devices., QCD/Scappucci Lab

We determine the energy splitting of the conduction-band valleys in two-dimensional electrons confined to low-disorder Si quantum wells. We probe the valley splitting dependence on both perpendicular magnetic field B and Hall density by performing activation energy measurements in the quantum Hall regime over a large range of filling factors. The mobility gap of the valley-split levels increases linearly with B and is strikingly independent of Hall density. The data are consistent with a transport model in which valley splitting depends on the incremental changes in density eB/h across quantum Hall edge strips, rather than the bulk density. Based on these results, we estimate that the valley splitting increases with density at a rate of 116 μeV/1011 cm-2, which is consistent with theoretical predictions for near-perfect quantum well top interfaces., QCD/Scappucci Lab, QuTech, Business Development, QCD/Veldhorst Lab

Electrons and holes confined in quantum dots define excellent building blocks for quantum emergence, simulation, and computation. Silicon and germanium are compatible with standard semiconductor manufacturing and contain stable isotopes with zero nuclear spin, thereby serving as excellent hosts for spins with long quantum coherence. Here, we demonstrate quantum dot arrays in a silicon metal-oxide-semiconductor (SiMOS), strained silicon (Si/SiGe), and strained germanium (Ge/SiGe). We fabricate using a multi-layer technique to achieve tightly confined quantum dots and compare integration processes. While SiMOS can benefit from a larger temperature budget and Ge/SiGe can make an Ohmic contact to metals, the overlapping gate structure to define the quantum dots can be based on a nearly identical integration. We realize charge sensing in each platform, for the first time in Ge/SiGe, and demonstrate fully functional linear and two-dimensional arrays where all quantum dots can be depleted to the last charge state. In Si/SiGe, we tune a quintuple quantum dot using the N + 1 method to simultaneously reach the few electron regime for each quantum dot. We compare capacitive crosstalk and find it to be the smallest in SiMOS, relevant for the tuning of quantum dot arrays. We put these results into perspective for quantum technology and identify industrial qubits, hybrid technology, automated tuning, and two-dimensional qubit arrays as four key trajectories that, when combined, enable fault-tolerant quantum computation., Green Open Access added to TU Delft Institutional Repository ‘You share, we take care!’ – Taverne project https://www.openaccess.nl/en/you-share-we-take-care Otherwise as indicated in the copyright section: the publisher is the copyright holder of this work and the author uses the Dutch legislation to make this work public., QCD/Veldhorst Lab, QuTech, QCD/Vandersypen Lab, QCD/Scappucci Lab, BUS/Quantum Delft, QN/Vandersypen Lab

A clear signature of Zeeman split states crossing is observed in a Landau fan diagram of strained germanium two-dimensional hole gas. The underlying mechanisms are discussed based on a perturbative model yielding a closed formula for the critical magnetic fields. These fields depend strongly on the energy difference between the topmost and neighboring valence bands and are sensitive to the quantum well thickness, strain, and spin-orbit interaction. The latter is a necessary feature for the crossing to occur. This framework enables a straightforward quantification of the hole-state parameters from simple measurements, thus paving the way for its use in design and modeling of hole-based quantum devices., QCD/Scappucci Lab, QuTech, Business Development

Electrons and holes confined in quantum dots define excellent building blocks for quantum emergence, simulation, and computation. Silicon and germanium are compatible with standard semiconductor manufacturing and contain stable isotopes with zero nuclear spin, thereby serving as excellent hosts for spins with long quantum coherence. Here, we demonstrate quantum dot arrays in a silicon metal-oxide-semiconductor (SiMOS), strained silicon (Si/SiGe), and strained germanium (Ge/SiGe). We fabricate using a multi-layer technique to achieve tightly confined quantum dots and compare integration processes. While SiMOS can benefit from a larger temperature budget and Ge/SiGe can make an Ohmic contact to metals, the overlapping gate structure to define the quantum dots can be based on a nearly identical integration. We realize charge sensing in each platform, for the first time in Ge/SiGe, and demonstrate fully functional linear and two-dimensional arrays where all quantum dots can be depleted to the last charge state. In Si/SiGe, we tune a quintuple quantum dot using the N + 1 method to simultaneously reach the few electron regime for each quantum dot. We compare capacitive crosstalk and find it to be the smallest in SiMOS, relevant for the tuning of quantum dot arrays. We put these results into perspective for quantum technology and identify industrial qubits, hybrid technology, automated tuning, and two-dimensional qubit arrays as four key trajectories that, when combined, enable fault-tolerant quantum computation., Green Open Access added to TU Delft Institutional Repository ‘You share, we take care!’ – Taverne project https://www.openaccess.nl/en/you-share-we-take-care Otherwise as indicated in the copyright section: the publisher is the copyright holder of this work and the author uses the Dutch legislation to make this work public., QCD/Veldhorst Lab, QCD/Vandersypen Lab, QCD/Scappucci Lab, BUS/Quantum Delft, QN/Vandersypen Lab

A clear signature of Zeeman split states crossing is observed in a Landau fan diagram of strained germanium two-dimensional hole gas. The underlying mechanisms are discussed based on a perturbative model yielding a closed formula for the critical magnetic fields. These fields depend strongly on the energy difference between the topmost and neighboring valence bands and are sensitive to the quantum well thickness, strain, and spin-orbit interaction. The latter is a necessary feature for the crossing to occur. This framework enables a straightforward quantification of the hole-state parameters from simple measurements, thus paving the way for its use in design and modeling of hole-based quantum devices., QCD/Scappucci Lab, Business Development

Planar Josephson junctions (JJs) made in semiconductor quantum wells with large spin-orbit coupling are capable of hosting topological superconductivity. Indium antimonide (InSb) two-dimensional electron gases (2DEGs) are particularly suited for this due to their large Landé g-factor and high carrier mobility, however superconducting hybrids in these 2DEGs remain unexplored. Here we create JJs in high quality InSb 2DEGs and provide evidence of ballistic superconductivity over micron-scale lengths. A Zeeman field produces distinct revivals of the supercurrent in the junction, associated with a 0−π transition. We show that these transitions can be controlled by device design, and tuned in-situ using gates. A comparison between experiments and the theory of ballistic π-Josephson junctions gives excellent quantitative agreement. Our results therefore establish InSb quantum wells as a promising new material platform to study the interplay between superconductivity, spin-orbit interaction and magnetism., QRD/Goswami Lab, QuTech, QCD/Scappucci Lab

We report density-dependent effective hole mass measurements in undoped germanium quantum wells. We are able to span a large range of densities (2.0-11×1011cm-2) in top-gated field effect transistors by positioning the strained buried Ge channel at different depths of 12 and 44 nm from the surface. From the thermal damping of the amplitude of Shubnikov-de Haas oscillations, we measure a light mass of 0.061me at a density of 2.2×1011cm-2. We confirm the theoretically predicted dependence of increasing mass with density and by extrapolation we find an effective mass of ∼0.05me at zero density, the lightest effective mass for a planar platform that demonstrated spin qubits in quantum dots., QCD/Scappucci Lab, QuTech, Business Development, QCD/Veldhorst Lab

We demonstrate the use of plasmonic effects to boost the near-infrared sensitivity of metal-semiconductor-metal detectors. Plasmon-enhanced photodetection is achieved by properly optimizing Au interdigitated electrodes, micro-fabricated on Ge, a semiconductor that features a strong near IR absorption. Finite-difference time-domain simulations, photocurrent experiments and Fourier-transform IR spectroscopy are performed to validate how a relatively simple tuning of the contact geometry allows for an enhancement of the response of the device adapting it to the specific detection needs. A 2-fold gain factor in the Ge absorption characteristics is experimentally demonstrated at 1.4 µm, highlighting the potential of this approach for optoelectronic and sensing applications., QCD/Scappucci Lab

Buried-channel semiconductor heterostructures are an archetype material platform for the fabrication of gated semiconductor quantum devices. Sharp confinement potential is obtained by positioning the channel near the surface; however, nearby surface states degrade the electrical properties of the starting material. Here, a 2D hole gas of high mobility (5 × 105 cm2 V−1 s−1) is demonstrated in a very shallow strained germanium (Ge) channel, which is located only 22 nm below the surface. The top-gate of a dopant-less field effect transistor controls the channel carrier density confined in an undoped Ge/SiGe heterostructure with reduced background contamination, sharp interfaces, and high uniformity. The high mobility leads to mean free paths ≈ 6 µm, setting new benchmarks for holes in shallow field effect transistors. The high mobility, along with a percolation density of 1.2 × 1011cm−2, light effective mass (0.09me), and high effective g-factor (up to 9.2) highlight the potential of undoped Ge/SiGe as a low-disorder material platform for hybrid quantum technologies., Business Development, QuTech, QCD/Scappucci Lab, QCD/Veldhorst Lab

We demonstrate the use of plasmonic effects to boost the near-infrared sensitivity of metal-semiconductor-metal detectors. Plasmon-enhanced photodetection is achieved by properly optimizing Au interdigitated electrodes, micro-fabricated on Ge, a semiconductor that features a strong near IR absorption. Finite-difference time-domain simulations, photocurrent experiments and Fourier-transform IR spectroscopy are performed to validate how a relatively simple tuning of the contact geometry allows for an enhancement of the response of the device adapting it to the specific detection needs. A 2-fold gain factor in the Ge absorption characteristics is experimentally demonstrated at 1.4 µm, highlighting the potential of this approach for optoelectronic and sensing applications., QCD/Scappucci Lab

We report density-dependent effective hole mass measurements in undoped germanium quantum wells. We are able to span a large range of densities (2.0-11×1011cm-2) in top-gated field effect transistors by positioning the strained buried Ge channel at different depths of 12 and 44 nm from the surface. From the thermal damping of the amplitude of Shubnikov-de Haas oscillations, we measure a light mass of 0.061me at a density of 2.2×1011cm-2. We confirm the theoretically predicted dependence of increasing mass with density and by extrapolation we find an effective mass of ∼0.05me at zero density, the lightest effective mass for a planar platform that demonstrated spin qubits in quantum dots., QCD/Scappucci Lab, Business Development, QCD/Veldhorst Lab

Buried-channel semiconductor heterostructures are an archetype material platform for the fabrication of gated semiconductor quantum devices. Sharp confinement potential is obtained by positioning the channel near the surface; however, nearby surface states degrade the electrical properties of the starting material. Here, a 2D hole gas of high mobility (5 × 105 cm2 V−1 s−1) is demonstrated in a very shallow strained germanium (Ge) channel, which is located only 22 nm below the surface. The top-gate of a dopant-less field effect transistor controls the channel carrier density confined in an undoped Ge/SiGe heterostructure with reduced background contamination, sharp interfaces, and high uniformity. The high mobility leads to mean free paths ≈ 6 µm, setting new benchmarks for holes in shallow field effect transistors. The high mobility, along with a percolation density of 1.2 × 1011cm−2, light effective mass (0.09me), and high effective g-factor (up to 9.2) highlight the potential of undoped Ge/SiGe as a low-disorder material platform for hybrid quantum technologies., Business Development, QCD/Scappucci Lab, QCD/Veldhorst Lab