Search

Ice XIX and ice XV are both partly hydrogen-ordered counterparts to disordered ice VI. The ice XIX → XV transition represents the only order-to-order transition in ice physics. Using Raman and dielectric spectroscopies, we investigate the ambient-pressure kinetics of the two individual steps in this transition in real time (of hours), that is, ice XIX → transient ice VI (the latter called VI‡) and ice VI‡ → ice XV. Hydrogen-disordered ice VI‡ appears intermittent between 101 and 120 K, as inferred from the appearance and subsequent disappearance of the ice VI Raman marker bands. A comparison of the rate constants for the H2O ices reported here with those from D2O samples [Thoeny et al., J. Chem. Phys. 156, 154507 (2022)] reveals a large kinetic isotope effect for the ice XIX decay, but a much smaller one for the ice XV buildup. An enhancement of the classical overbarrier rate through quantum tunneling for the former can provide a possible explanation for this finding. The activation barriers for both transitions are in the 18–24 kJ/mol range, which corresponds to the energy required to break a single hydrogen bond. These barriers do not show an H/D isotope effect and are the same, no matter whether they are derived from Raman scattering or from dielectric spectroscopy. These findings favor the notion that a dipolar reorientation, involving the breakage of a hydrogen bond, is the rate determining step at the order-to-order transition. [ABSTRACT FROM AUTHOR]

We have investigated pressure-induced amorphization (PIA) of an alcohol clathrate hydrate (CH) of cubic structure type I (sI) in the presence of NH4F utilizing dilatometry and x-ray powder diffraction. PIA occurs at 0.98 GPa at 77 K, which is at a much lower pressure than for other CHs of the same structure type. The amorphized CH also shows remarkable resistance against crystallization upon decompression. While amorphized sI CHs could not be recovered previously at all, this is possible in the present case. By contrast to other CHs, the recovery of the amorphized CHs to ambient pressure does not even require a high-pressure annealing step, where recovery without any loss of amorphicity is possible at 120 K and below. Furthermore, PIA is accessible upon compression at unusually high temperatures of up to 140 K, where it reaches the highest degree of amorphicity. Molecular dynamics simulations confirm that polar alcoholic guests, as opposed to non-polar guests, induce cage deformation at lower pressure. The substitution of NH4F into the host-lattice stabilizes the collapsed state more than the crystalline state, thereby enhancing the collapse kinetics and lowering the pressure of collapse. [ABSTRACT FROM AUTHOR]

We here review mostly experimental and some computational work devoted to nucleation in amorphous ices. In fact, there are only a handful of studies in which nucleation and growth in amorphous ices are investigated as two separate processes. In most studies, crystallization temperatures Tx or crystallization rates RJG are accessed for the combined process. Our Review deals with different amorphous ices, namely, vapor-deposited amorphous solid water (ASW) encountered in many astrophysical environments; hyperquenched glassy water (HGW) produced from μm-droplets of liquid water; and low density amorphous (LDA), high density amorphous (HDA), and very high density amorphous (VHDA) ices produced via pressure-induced amorphization of ice I or from high-pressure polymorphs. We cover the pressure range of up to about 6 GPa and the temperature range of up to 270 K, where only the presence of salts allows for the observation of amorphous ices at such high temperatures. In the case of ASW, its microporosity and very high internal surface to volume ratio are the key factors determining its crystallization kinetics. For HGW, the role of interfaces between individual glassy droplets is crucial but mostly neglected in nucleation or crystallization studies. In the case of LDA, HDA, and VHDA, parallel crystallization kinetics to different ice phases is observed, where the fraction of crystallized ices is controlled by the heating rate. A key aspect here is that in different experiments, amorphous ices of different "purities" are obtained, where "purity" here means the "absence of crystalline nuclei." For this reason, "preseeded amorphous ice" and "nuclei-free amorphous ice" should be distinguished carefully, which has not been done properly in most studies. This makes a direct comparison of results obtained in different laboratories very hard, and even results obtained in the same laboratory are affected by very small changes in the preparation protocol. In terms of mechanism, the results are consistent with amorphous ices turning into an ultraviscous, deeply supercooled liquid prior to nucleation. However, especially in preseeded amorphous ices, crystallization from the preexisting nuclei takes place simultaneously. To separate the time scales of crystallization from the time scale of structure relaxation cleanly, the goal needs to be to produce amorphous ices free from crystalline ice nuclei. Such ices have only been produced in very few studies. [ABSTRACT FROM AUTHOR]

Calorimetric and optical cryo-microscope measurements of 10-64 wt % citric acid (CA) solutions subjected to moderate (3 K/min) and slow (0.5 and 0.1 K/min) cooling/warming rates and also to quenching/moderate warming between 320 and 133 K are presented. Depending on solution concentration and cooling rate, the obtained thermograms show one freezing event and from one to three liquid-glass transitions upon cooling and from one to six liquid-glass and reverse glass-liquid transitions, one or two freezing events, and one melting event upon warming of frozen/glassy CA/H2O. The multiple freezing events and glass transitions pertain to the mother CA/H2O solution itself and two freeze-concentrated solution regions, FCS1 and FCS2, of different concentrations. The FCS1 and FCS2 (or FCS22) are formed during the freezing of CA/H2O upon cooling and/or during the freezing upon warming of partly glassy or entirely glassy mother CA/H2O. The formation of two FCS1 and FCS22 regions during the freezing upon warming to our best knowledge has never been reported before. Using an optical cryo-microscope, we are able to observe the formation of a continuous ice framework (IF) and its morphology and reciprocal distribution of IF/(FCS1 + FCS2). Our results provide a new look at the freezing and glass transition behavior of aqueous solutions and can be used for the optimization of lyophilization and freezing of foods and biopharmaceutical formulations, among many other applications where freezing plays a crucial role.

The freezing of aqueous solutions and reciprocal distribution of ice and a freeze-concentrated solution (FCS) are poorly understood in spite of their importance in fields ranging from biotechnology and life sciences to geophysics and climate change. Using an optical cryo-microscope and differential scanning calorimetry, we demonstrate that upon cooling of citric acid and sucrose solutions a fast freezing process results in a continuous ice framework (IF) and two freeze-concentrated solution regions of different concentrations, FCS1 and FCS2. The FCS1 is maximally freeze-concentrated and interweaves with IF. The less concentrated FCS2 envelops the entire IF/FCS1. We find that upon further cooling, the FCS1 transforms to glass, whereas the slow freezing of FCS2 continues until it is terminated by a FCS2-glass transition. We observe the resumed slow freezing of FCS2 upon subsequent warming. The net thermal effect of the resumed freezing and a reverse glass-FCS1 transition produces the Ttr2-transition which before has only been observed upon warming of frozen hydrocarbon solutions and which nature has remained misunderstood for decades.

In previous work, water's second glass transition was investigated based on an amorphous sample made from crystalline ice [Amann-Winkel et al., Proc. Natl. Acad. Sci. U. S. A. 110, 17720 (2013)]. In the present work, we investigate water's second glass transition based on the genuine glassy state of high-density water as prepared from micron-sized liquid water droplets, avoiding crystallinity at all stages. All the calorimetric features of water's second glass transition observed in the previous work are also observed here on the genuine glassy samples. This suggests that the glass transition indeed thermodynamically links amorphous ices continuously with deeply supercooled water. We proceed to extend the earlier study by investigating the effect of preparation history on the calorimetric glass transition temperature. The best samples prepared here feature both a lower glass transition temperature Tg,2 and a higher polyamorphic transition temperature Tons, thereby extending the range of thermal stability in which the deeply supercooled liquid can be observed by about 4 K. Just before the polyamorphic transition, we observe a spike-like increase of heat capacity that we interpret in terms of nucleation of low-density water. Without this spike, the width of water's second glass transition is 15 K, and the Δcp amounts to 3 ± 1 J K−1 mol−1, making the case for the high-density liquid being a strong liquid. We suggest that samples annealed at 1.9 GPa to 175 K and decompressed at 140 K to ≥0.10 GPa are free from such nuclei and represent the most ideal high-density amorphous glasses. [ABSTRACT FROM AUTHOR]

The nature of the hydrogen substructure of a deuterated and deuterium chloride (DCI)-doped ice VI sample after cooling at 1.8 GPa has been a topic of recent interest—especially because the novel ice polymorph ice XIX was discovered in the course of such studies. We here investigate deuterated samples containing 5% H2O using Raman spectroscopy to probe for transitions associated with rearrangement of D-atoms in ice XIX. The protocol involving heating at subambient pressure (10 mbar) in this study follows closely the one used in our earlier neutron diffraction study. Heating of ice XIX induces a complex cascade of processes involving both ordering and disordering of D atoms. Our Raman spectra demonstrate that the transition sequence is ice XIX → ice VI‡ → ice XV, in accordance with our earlier neutron diffraction result. First signs for ice XIX decay are evident at 100 K, while ice XV build-up is seen only at 108 K and above. Between 100 and 108 K, a transiently disordered D-substructure appears, where at 108 K, ice VI‡ forms from ice XIX and simultaneously decays to produce ice XV—thereby establishing a dynamic equilibrium. Using isothermal, time-resolved Raman spectroscopy in real time, we here determine rate constants, Avrami exponents, and activation energies for both slow processes, ice XIX decay and ice XV build-up. The first transition in this sequence, ice XIX decay, is faster than the second transition, ice XV build-up, so that ice VI‡ accumulates. On the basis of the Johnson–Mehl–Avrami–Kolmogorov data obtained from the isothermal Raman experiment, we additionally report kinetic models for the development of fractions of ices XIX, XV, and VI‡ in non-isothermal heating experiments at different heating rates. These models consider the two coupled first-order transitions as separated processes, where the phase fractions are calculated for incrementally small temperature (or time) steps. These models compare favorably with our previous observations for slowly or rapidly heated ice XIX samples, such as in calorimetry or neutron diffraction experiments. [ABSTRACT FROM AUTHOR]

Using oxygen-17 as a nuclear probe, spin relaxometry was applied to study the high-density and low-density states of amorphous ice, covering temperatures below and somewhat above their glass transitions. These findings are put in perspective with results from deuteron nuclear magnetic resonance and with calculations based on dielectrically detected correlation times. This comparison reveals the presence of a wide distribution of correlation times. Furthermore, oxygen-17 central-transition echo spectra were recorded for wide ranges of temperature and pulse spacing. The spectra cannot be described by a single set of quadrupolar parameters, suggesting a distribution of H–O–H opening angles that is broader for high-density than for low-density amorphous ice. Simulations of the pulse separation dependent spin-echo spectra for various scenarios demonstrate that a small-step frequency diffusion process, assigned to the presence of homonuclear oxygen–oxygen interactions, determines the shape evolution of the pulse-separation-dependent spectra. [ABSTRACT FROM AUTHOR]

NaTi2(PO4)3 (NTP) is known as a promising insertion‐type anode material for aqueous and non‐aqueous sodium‐ion batteries (SIBs), due to its NASICON‐type open 3D framework which makes a zero‐strain insertion mechanism possible. NTP is considered to be an environmentally friendly, low‐cost and high safety material. However, the electrochemical performance of NTP is limited due to its poor electrical conductivity. In this work a solvothermal synthesis method is used to synthesize NTP with a nanocube (NC) morphology. In a one‐step synthesis rutile titanium dioxide (TiO2) and carbon coating of NTP are achieved (NTP/C‐RT), simultaneously, which significantly improves the poor electrical conductivity of NTP. Additional rutile coating is used to further improve the electrochemical performance compared to simple carbon coating. Rate capabilities of 301 mAh/g are achieved for NTP/C‐RT compared to 248 mAh/g for NTP/C at 0.1 C. That is, to the best of our knowledge, the highest gravimetric capacity reported for SIBs using NTP as anode material up to now. The results prove that NTP, which is itself already a promising anode material for SIBs, can be further enhanced with a combined approach of NC morphology, carbon and rutile coating, leading to superior capacities, higher than anywhere else reported in literature. [ABSTRACT FROM AUTHOR]

From crystalline tetrahydrofuran clathrate hydrate, THF–CH (THF·17H2O, cubic structure II), three distinct polyamorphs can be derived. First, THF–CH undergoes pressure-induced amorphization when pressurized to 1.3 GPa in the temperature range 77–140 K to a form which, in analogy to pure ice, may be called high-density amorphous (HDA). Second, HDA can be converted to a densified form, VHDA, upon heat-cycling at 1.8 GPa to 180 K. Decompression of VHDA to atmospheric pressure below 130 K produces the third form, recovered amorphous (RA). Results from neutron scattering experiments and molecular dynamics simulations provide a generalized picture of the structure of amorphous THF hydrates with respect to crystalline THF–CH and liquid THF·17H2O solution (∼2.5 M). Although fully amorphous, HDA is heterogeneous with two length scales for water–water correlations (less dense local water structure) and guest–water correlations (denser THF hydration structure). The hydration structure of THF is influenced by guest–host hydrogen bonding. THF molecules maintain a quasiregular array, reminiscent of the crystalline state, and their hydration structure (out to 5 Å) constitutes ∼23H2O. The local water structure in HDA is reminiscent of pure HDA-ice featuring 5-coordinated H2O. In VHDA, the hydration structure of HDA is maintained but the local water structure is densified and resembles pure VHDA-ice with 6-coordinated H2O. The hydration structure of THF in RA constitutes ∼18 H2O molecules and the water structure corresponds to a strictly 4-coordinated network, as in the liquid. Both VHDA and RA can be considered as homogeneous. [ABSTRACT FROM AUTHOR]