Search

The Star-Planet Activity Research CubeSat (SPARCS) is a 6U CubeSat under development to monitor the flaring and chromospheric activity of M dwarfs at near-ultraviolet (NUV) and far-ultraviolet (FUV) wavelengths. The spacecraft hosts two UV-optimized delta-doped charge-coupled devices fed by a 9-cm telescope and a dichroic beam splitter. A dedicated science payload processor performs near real-time onboard science image processing to dynamically change detector integration times and gains to reduce the occurrence of pixel saturation during strong M dwarf flaring events and provide adequate flare light curve structure resolution while enabling the detection of low-amplitude rotational modulation. The processor independently controls the NUV and FUV detectors. For each detector, it derives control updates from the most recent completed exposure and applies them to the next exposure. The detection of a flare event in the NUV channel resets the exposure in the FUV channel with new exposure parameters. Implementation testing of the control algorithm using simulated light curves and full-frame images demonstrates a robust response to the quiescent and flaring levels expected for the stars to be monitored by the mission. The SPARCS onboard autonomous exposure control algorithm is adaptable for operation in future point source-targeting space-based and ground-based observatories geared towards the monitoring of extreme transient astrophysics phenomena., 11 pages, 8 figures; Monthly Notices of the Royal Astronomical Society (MNRAS), in press

The Star-Planet Activity Research CubeSat (SPARCS) is positioned to revolutionize our understanding of M-dwarf star evolution, activity, variability, and the habitability of surrounding exoplanets. SPARCS will be the first mission to observe M stars for long periods of time simultaneously using a dual channel FUV (153 – 171 nm) and NUV (260 - 300 nm) imaging system. Anticipated to launch in 2023, SPARCS will provide key UV context to future observations by TESS and JWST, and the spaceflight application of advanced new detector technologies will pave the way for their implementation into future missions like LUVOIR and HabEx. To realize the scientific potential of SPARCS against the challenges of the ultraviolet spectrum, we are developing the specialized facilities, procedures, and tests necessary to assemble, integrate, and test the SPARCS science payload and spacecraft. A thorough testing campaign will verify the performance of individual payload components and obtain calibration baselines from the fully assembled science instrument that are vital to the data reduction process and in-flight contamination monitoring. SPARCS requires extensive contamination control to maintain its sensitivity in the FUV and NUV, which means all of AIT must occur in controlled and precisely monitored environments. This work will result in: (1) The delivery of the assembled and tested SPARCS spacecraft for launch in 2023. (2) A comprehensive performance validation and calibration baseline for SPARCS including a measurement of system throughput to for every wavelength across the SPARCS bandpasses, maps of NUV and FUV sensitivity across the payload field of view, and a full set of calibration products like flatfield images and dark current measurements for data reduction and comparison with calibration products acquired in orbit to monitor spacecraft conditions. (3) The establishment of a fully operational CubeSat AIT laboratory at ASU equipped to handle CubeSats up to 6U in size requiring meticulous contamination control up to the levels required for working in the FUV. This paper presents the work completed so far on the development and early operation of assembly, integration, and testing facilities for SPARCS. A custom thermal vacuum (TVAC) chamber facility was created and one of Arizona State University’s cleanroom environments was retrofitted to accommodate a 6U ultraviolet CubeSat requiring strict contamination control. We will describe the TVAC facility design and early testing, the cleanroom operation and contamination monitoring, and the development of an optical system and procedures to characterize the optical performance.

Know thy star, know thy planet,... especially in the ultraviolet (UV). Over the past decade, that motto has grown from mere wish to necessity in the M dwarf regime, given that the intense and highly variable UV radiation from these stars is suspected of strongly impacting their planets' habitability and atmospheric loss. This has led to the development of the Star-Planet Activity Research CubeSat (SPARCS), a NASA-funded 6U CubeSat observatory fully devoted to the photometric monitoring of the UV flaring of M dwarfs hosting potentially habitable planets. The SPARCS science imaging system uses a 9-cm telescope that feeds two delta-doped UV-optimized CCDs through a dichroic beam splitter, enabling simultaneous monitoring of a target field in the near-UV and far-UV. A dedicated onboard payload processor manages science observations and performs near-real time image processing to sustain an autonomous dynamic exposure control algorithm needed to mitigate pixel saturation during flaring events. The mission is currently half-way into its development phase. We present an overview of the mission's science drivers and its expected contribution to our understanding of star-planet interactions. We also present the expected performance of the autonomous dynamic exposure control algorithm, a first-of-its-kind on board a space-based stellar astrophysics observatory., Comment: 6 pages, 4 figures, Accepted for publication in Astronomische Nachrichten

The Star-Planet Activity Research CubeSat (SPARCS) is a 6U CubeSat under construction that is devoted to the photometric monitoring of M stars in the far-UV (FUV) and near-UV (NUV), to measure the time-dependent spectral slope, intensity and evolution of low-mass star high-energy radiation. We report on the progress made in the assembly, integration and test of the instrument payload at Arizona State University using a custom TVAC chamber and optical stimulus that provides calibration light sources and the custom contamination control environment that the FUV demands. The payload consists of a custom 90mm clear aperture telescope developed by Hexagon/Sigma Space, combined with a dichroic plate to separate the FUV and NUV beams developed by Teledyne Acton and Materion, married with twin focal plane array cameras separately optimized for their bandpasses as developed by JPL.