Search

Carbon-supported nanocomposites are attracting particular attention as high-performance, low-cost electrocatalysts for electrochemical water splitting. These are mostly prepared by pyrolysis and hydrothermal procedures that are time-consuming (from hours to days) and typically difficult to produce a nonequilibrium phase. Herein, for the first time ever, we exploit magnetic induction heating-quenching for ultrafast production of carbon-FeNi spinel oxide nanocomposites (within seconds), which exhibit an unprecedentedly high performance towards oxygen evolution reaction (OER), with an ultralow overpotential of only +260 mV to reach the high current density of 100 mA cm-2. Experimental and theoretical studies show that the rapid heating and quenching process (ca. 103 K s-1) impedes the Ni and Fe phase segregation and produces a Cl-rich surface, both contributing to the remarkable catalytic activity. Results from this study highlight the unique advantage of ultrafast heating/quenching in the structural engineering of functional nanocomposites to achieve high electrocatalytic performance towards important electrochemical reactions.

Oxygen reduction reaction (ORR) plays an important role in dictating the performance of various electrochemical energy technologies. As platinum nanoparticles have served as the catalysts of choice towards ORR, minimizing the cost of the catalysts by diminishing the platinum nanoparticle size has become a critical route to advancing the technological development. Herein, first-principle calculations show that carbon-supported Pt9 clusters represent the threshold domain size, and the ORR activity can be significantly improved by doping of adjacent cobalt atoms. This is confirmed experimentally, where platinum and cobalt are dispersed in nitrogen-doped carbon nanowires in varied forms, single atoms, few-atom clusters, and nanoparticles, depending on the initial feeds. The sample consisting primarily of Pt2~7 clusters doped with atomic Co species exhibits the best mass activity among the series, with a current density of 4.16 A mgPt -1 at +0.85 V vs. RHE that is almost 50 times higher than that of commercial Pt/C.

Hydrogen evolution reaction is an important process in electrochemical energy technologies. Herein, ruthenium and nitrogen codoped carbon nanowires are prepared as effective hydrogen evolution catalysts. The catalytic performance is markedly better than that of commercial platinum catalyst, with an overpotential of only -12 mV to reach the current density of 10 mV cm-2 in 1 M KOH and -47 mV in 0.1 M KOH. Comparisons with control experiments suggest that the remarkable activity is mainly ascribed to individual ruthenium atoms embedded within the carbon matrix, with minimal contributions from ruthenium nanoparticles. Consistent results are obtained in first-principles calculations, where RuCxNy moieties are found to show a much lower hydrogen binding energy than ruthenium nanoparticles, and a lower kinetic barrier for water dissociation than platinum. Among these, RuC2N2 stands out as the most active catalytic center, where both ruthenium and adjacent carbon atoms are the possible active sites.

Rational design of single-metal atom sites in carbon substrates by a flexible strategy is highly desired for the preparation of high-performance catalysts for metal-air batteries. In this study, biomass hydrogel reactors are utilized as structural templates to prepare carbon aerogels embedded with single iron atoms by controlled pyrolysis. The tortuous and interlaced hydrogel chains lead to the formation of abundant nanowrinkles in the porous carbon aerogels, and single iron atoms are dispersed and stabilized within the defective carbon skeletons. X-ray absorption spectroscopy measurements indicate that the iron centers are mostly involved in the coordination structure of FeN4, with a minor fraction (ca. 1/5) in the form of FeN3C. First-principles calculations show that the FeN x sites in the Stone-Wales configurations induced by the nanowrinkles of the hierarchically porous carbon aerogels show a much lower free energy than the normal counterparts. The resulting iron and nitrogen-codoped carbon aerogels exhibit excellent and reversible oxygen electrocatalytic activity, and can be used as bifunctional cathode catalysts in rechargeable Zn-air batteries, with a performance even better than that based on commercial Pt/C and RuO2 catalysts. Results from this study highlight the significance of structural distortions of the metal sites in carbon matrices in the design and engineering of highly active single-atom catalysts.

Rational design of single-metal atom sites in carbon substrates by a flexible strategy is highly desired for the preparation of high-performance catalysts for metal-air batteries. In this study, biomass hydrogel reactors are utilized as structural templates to prepare carbon aerogels embedded with single iron atoms by controlled pyrolysis. The tortuous and interlaced hydrogel chains lead to the formation of abundant nanowrinkles in the porous carbon aerogels, and single iron atoms are dispersed and stabilized within the defective carbon skeletons. X-ray absorption spectroscopy measurements indicate that the iron centers are mostly involved in the coordination structure of FeN4, with a minor fraction (ca. 1/5) in the form of FeN3C. First-principles calculations show that the FeN x sites in the Stone-Wales configurations induced by the nanowrinkles of the hierarchically porous carbon aerogels show a much lower free energy than the normal counterparts. The resulting iron and nitrogen-codoped carbon aerogels exhibit excellent and reversible oxygen electrocatalytic activity, and can be used as bifunctional cathode catalysts in rechargeable Zn-air batteries, with a performance even better than that based on commercial Pt/C and RuO2 catalysts. Results from this study highlight the significance of structural distortions of the metal sites in carbon matrices in the design and engineering of highly active single-atom catalysts.

The two-electron electrocatalytic oxygen reduction reaction (2e− ORR) is a promising, sustainable, and efficient route for on-site and small-scale production of hydrogen peroxide (H2O2) compared to the conventional anthraquinone oxidation process. Although heteroatom doped carbon materials are widely studied for the 2e− ORR, few studies have been conducted on the synergistic relationship between multiple doping elements on H2O2 performance. Moreover, there is a lack of efficient and stable catalysts for H2O2 electrosynthesis in neutral media. In this work, a series of boron and nitrogen co-doped carbon (BNC) catalysts are synthesized and assessed for the 2e− ORR in neutral pH electrolyte. Through X-ray photoelectron and absorption spectroscopy analyses, we characterize B–N–C moieties and correlate them with H2O2 production performance. In rotating ring disk electrode measurements, BNC catalysts pyrolyzed at 900 °C exhibit H2O2 Faradaic efficiency of ∼70% and demonstrate excellent long-term stability over 10 hours of continuous operation. In a three-electrode flow cell, this catalyst achieves ∼78% H2O2 Faradaic efficiency and 0.9 mmol cm−2 h−1 productivity at 0.20 V vs. RHE, surpassing most previously reported carbon-based catalysts in neutral media. This work contributes fundamental insights into the role of boron and nitrogen heteroatom dopants toward 2e− ORR and highlights the practical viability of these catalysts for real world applications. [ABSTRACT FROM AUTHOR]

Limited charge separation/transport efficiency remains the primary obstacle of achieving satisfying photoelectrochemical (PEC) water splitting performance. Therefore, it is essential to develop diverse interfacial engineering strategies to mitigate charge recombination. Despite obvious progress having been made, most works only considered a single‐side modulation in either the electrons of conduction band or the holes of valence band in a semiconductor photoanode, leading to a limited PEC performance enhancement. Beyond this conventional thinking, we developed a novel coupling modification strategy to achieve a composite electrode with bidirectional carrier transport for a better charge separation, in which Ti2C3Tx MXene quantum dots (MQDs) and α‐Fe2O3 nanodots (FO) are anchored on the surface of ZnIn2S4 (ZIS) nanoplates, resulting in markedly improved PEC water splitting of pure ZIS photoanode. Systematic studies indicated that the bidirectional charge transfer pathways were stimulated due to MQDs as "electron extractor" and S−O bonds as carriers transport channels, which synergistically favors significantly enhanced charge separation. The enhanced kinetic behavior at the FO/MQDs/ZIS interfaces was systematically and quantitatively evaluated by a series of methods, especially scanning photoelectrochemical microscopy. This work may deepen our understanding of interfacial charge separation, and provide valuable guidance for the rational design and fabrication of high‐performance composite electrodes. [ABSTRACT FROM AUTHOR]

Iron, nitrogen‐codoped carbon (Fe−N−C) nanocomposites have emerged as viable electrocatalysts for the oxygen reduction reaction (ORR) due to the formation of FeNxCy coordination moieties. In this study, results from first‐principles calculations show a nearly linear correlation of the energy barriers of key reaction steps with the Fe magnetic moment. Experimentally, when single Cu sites are incorporated into Fe−N−C aerogels (denoted as NCAG/Fe−Cu), the Fe centers exhibit a reduced magnetic moment and markedly enhanced ORR activity within a wide pH range of 0–14. With the NCAG/Fe−Cu nanocomposites used as the cathode catalyst in a neutral/quasi‐solid aluminum–air and alkaline/quasi‐solid zinc–air battery, both achieve a remarkable performance with an ultrahigh open‐circuit voltage of 2.00 and 1.51 V, large power density of 130 and 186 mW cm−2, and good mechanical flexibility, all markedly better than those with commercial Pt/C or Pt/C‐RuO2 catalysts at the cathode. [ABSTRACT FROM AUTHOR]