Search

As one of the most widely used infrared (IR) detectors, a mercury cadmium telluride (MCT) detector usually requires liquid nitrogen refrigeration to suppress thermally activated noise mechanisms that are inherent to its narrow bandgap, which limits its practical applications. Therefore, it is essential to develop strategies to suppress dark current with reduced cooling demand. In this work, a surface plasmon resonance (SPR) enhanced MCT microcavity was proposed to intensify optical absorption across a broadband while diminishing the thickness of the MCT layer to reduce intrinsic dark current proportional to the volume of the absorber. The microcavity is formed by sandwiching the MCT layer between a top well-designed hybrid golden-cross antenna array and a bottom golden reflector. The microcavity is employed to trap the incident light to amplify the absorption, and the golden-cross antenna array is introduced to not only significantly enhance the incident light field through the SPR effect but also to broaden the microcavity resonant mode. Numerical calculation indicated that an absorptance exceeding 95.3% can be attained at 3.4 μm with the full width at half maxima (FWHM) extending beyond 1.38 μm, which almost covers the absorption band of MCT in mid-wavelength IR (MWIR), all while the MCT layer is only 530 nm. Moreover, the prototype device unit was fabricated and tested. Measured peak absorption reached 98.7% @ 3.6 μm and FWHM was as broad as 1.12 μm. These results demonstrate that the high and wideband absorption in an ultrathin MCT layer is achieved based on the synergistic effects of SPR and microcavity resonance. [ABSTRACT FROM AUTHOR]

As large‐area and optically transparent photon harvesting devices, luminescent solar concentrators (LSCs) are promising candidates for building‐integrated photovoltaics owing to their high transmittance and resistance to shadowing effects existing in solar cells. Up to now, there are still many challenges in the practical application of LSCs: 1) Reabsorption loss is inevitable during photoluminescence transmission due to indirect illumination of solar cells in LSC system. 2) Satisfactory energy harvesting cannot be achieved in rainy conditions due to the substantial attenuation of the incident light intensity. 3) Evaporation residue on the surface of LSCs leads to device performance degradation. Pioneering researches and feasible strategies for reabsorption loss suppression, energy harvesting in rainy days as well as self‐cleaning property are still lacking demonstration. In this work, reabsorption loss is suppressed based on advanced structural LSCs with universally applicable optical spacer layer. Then the integrated LSCs with droplet‐based electricity generator (DEG) are proposed for the first time. Such DEG‐LSCs not only realize synergistic harvesting of solar and raindrop energy, but also possess self‐cleaning properties. Finally, a self‐powered temperature and humidity sensing system is designed and demonstrated to provide feasible ideas for the practical application of DEG‐LSCs in self‐powered intelligent buildings. [ABSTRACT FROM AUTHOR]

To keep pace with the demands of modern photonic integration technology, the electro-optic modulator should feature multi-parameter tunable components and a compact size. Here, we propose a hybrid structure that can modulate the multi-parameters of surface plasmon polaritons (SPPs) simultaneously with a compact size by controlling the electron concentration of indium tin oxide (ITO) in the near-infrared spectrum. The length, width and height of the device are only 15 μm, 5 μm and 9 μm, respectively. The numerical results show that when the electron concentration in ITO changes from 7.5 × 1026 m−3 to 9.5 × 1026 m−3, the variation in amplitude, wavelength and phase are 49%, 300 nm and 347°, respectively. The demonstrated structure paves a new way for multi-parameter modulation and the realization of ultracompact modulators. [ABSTRACT FROM AUTHOR]

The random laser from sheared dye-doped polymer-dispersed liquid crystal (DDPDLC) is investigated. As the emission intensity weakens, the threshold of random laser from DDPDLC increases from 2.0 mJ/pulse to 4.0 mJ/pulse, and the degree of polarization (DOP) increases from 0.1 to 0.78, obviously when the shear distance increases from 0 mm to 4 mm. As the liquid crystal droplets are gradually oriented in the shear direction caused by alignment direction of polymer chain and anisotropy of droplet shape, the scattering intensity perpendicular to the shear direction gradually decreases and that parallel to the shear direction gradually increases. The anisotropic absorption of the laser dye also plays a certain role as the shear distance is 0 mm. The controllable intensity and polarization degree of random laser have a huge potential for sensing applications.

The solar‐only response nature limits the luminescent solar concentrators (LSCs) to solar harvesting rather than responding to other stimuli, which restricts the role of LSCs to energy supply in self‐powered internet of things (IoT) systems, and the application potential of LSCs in self‐powered devices has been seriously overlooked. In this work, LSCs with photovoltaic and piezoelectric features are proposed for the first time, extending the application scenario of LSCs to self‐powered sensors with pressure responsiveness. The luminescent layer of perovskite‐polymer composite film is prepared via in situ blade coating with the piezoelectric polymer matrix of poly(vinylidenefluoride‐trifluoroethylene) (P(VDF‐TrFE)). P(VDF‐TrFE) possesses stronger DMF adsorption capacity and higher electroactive phase content than a conventional piezoelectric matrix of poly(vinylidene fluoride) (PVDF), which not only reduces the residual‐solvent‐induced defects in perovskite luminophores, but also brings a sensitive pressure response to LSCs. The dual‐functional LSCs achieve a power conversion efficiency of 1.01% and a output piezoelectric voltage of 0.95 V can be obtained even at a low pressure of 0.16 kPa. A self‐powered speed measurement system is demonstrated, and the actual speed measurement is carried out. Such dual‐functional LSCs show great potential in self‐powered electrical devices, which can be applied to low‐energy‐consumption IoT systems and other commercial smart home products. [ABSTRACT FROM AUTHOR]