Search

The increasing environmental concerns of conventional antifouling coatings have led to the exploration of novel and sustainable solutions to address the biofouling caused by Limnoperna fortunei. As a rapidly expanding invasive species, the fouling process of Limnoperna fortunei is closely associated with microbial fouling, posing significant threats to the integrity of aquatic infrastructure and biodiversity. This review discusses recent progress in the development of non-toxic, eco-friendly antifouling coatings that are designed to effectively resist biofouling without using toxic chemicals. Recent research has focused on developing novel non-toxic coatings that integrate natural bioactive components with advanced material technologies. These formulations not only meet current environmental standards and exhibit minimal ecological impact, but also possess significant potential in preventing the attachment, growth, and reproduction of Limnoperna fortunei. This review aims to provide scientific guidance by proposing effective and sustainable solutions to address the ecological challenges presented by Limnoperna fortunei. The insights gained from current research not only reveal novel antifouling methods, but also identify key areas for further investigation aimed at enhancing performance and environmental compatibility. [ABSTRACT FROM AUTHOR]

Volatile organic compounds (VOCs), particularly aromatic hydrocarbons, pose significant environmental risks due to their toxicity and role in the formation of secondary pollutants. This study explores the potential of catalytic pyrolysis as an innovative strategy for the effective remediation and conversion of aromatic hydrocarbon pollutants. The research investigates the high-efficiency removal and resource recovery of the VOC toluene using a Ni/Al2O3 catalyst. The Ni/Al2O3 catalyst was synthesized using the impregnation method and thoroughly characterized. Various analytical techniques, including scanning electron microscopy, X-ray diffraction, and N2 adsorption–desorption isotherms, were employed to characterize the Al2O3 support, NiO/Al2O3 precursor, Ni/Al2O3 catalyst, and the resulting solid carbon. Results indicate that Ni predominantly occupies the pores of γ-Al2O3, forming nano/microparticles and creating interstitial pores through aggregation. The catalyst demonstrated high activity in the thermochemical decomposition of toluene into solid carbon materials and COx-Free hydrogen, effectively addressing toluene pollution while recovering valuable resources. Optimal conditions were identified, revealing that a moderate temperature of 700 °C is most favorable for the catalytic process. Under optimized conditions, the Ni/Al2O3 catalyst removed 1328 mg/g of toluene, generated 915 mg/g of carbon material, and produced 1234 mL/g of hydrogen. The prepared carbon material, characterized by its mesoporous structure and high specific surface area graphite nanofibers, holds potential application value in adsorption, catalysis, and energy storage. This study offers a promising approach for the purification and resource recovery of aromatic volatile organic compounds, contributing to the goals of a circular economy and green chemistry. [ABSTRACT FROM AUTHOR]

The effects of prior austenite grain (PAG) refinement on the mechanical properties of bainitic/martensitic steels not only come from itself, but also have more complex effects by affecting the substructure formed by coherent transformation. In this study, the samples of a low-alloy steel were water quenched from different austenitizing temperatures and the bainitic/martensitic microstructures with different PAG sizes were obtained. Electron back-scattered diffraction was used to characterize the microstructure and different types of boundaries were identified and quantitatively analyzed. The tensile tests and series temperature Charpy impact tests of different heat treatment were also carried out and comprehensively analyzed with microstructure characterization works. The results show that the uniform refinement of prior austenite grain can increases the density of packet boundary and block boundary, which leads to microstructure refinement with higher density of high-angle grain boundaries with misorientation >45°. The contribution of this microstructure refinement to toughness is significant, but its contributions to strength and elongation are relatively limited. Compared to uniform refined PAG, if the PAGs are mixed crystal, the density of block boundary will be reduced, which leads to a lower density of the high-angle boundary with misorientation >45° and the positive effects of microstructure refinement on toughness improvement are weakened. The observation of fracture surface of impact specimens indicates that refining the PAG can delay the tendency of brittle fracture with the decrease in test temperature, and even in the case of brittle fracture, the cleavage facet of the fracture surface is relatively smaller. This result also verifies that PAG refinement can effectively improve toughness by inhibiting cleavage fracture. [ABSTRACT FROM AUTHOR]