Search

Due to the unbalanced load connection in the sensitive load bus (SLB), the ac microgrid may suffer from voltage unbalance in the system. To overcome this issue, this article presents a new distributed control scheme to achieve the unbalanced voltage compensation for islanded ac microgrid with limited noncontinuous communication among the distributed generation (DG) units. In this article, a two-layer control framework, including the cyber layer and the primary control layer, is employed. The proposed control strategy that is applied in the cyber layer implements an event-triggered communication to effectively compensate for the unbalanced voltage in the SLB. In contrast with the centralized control strategy, the proposed control strategy is fully distributed, and the information exchange among the DG units at only the event-triggered times. As a result, the communication burdens can be measurably reduced while the control performance is not affected. The stability is analyzed with the Lyapunov function in this article. Finally, several experimental case studies are provided to verify the effectiveness of the proposed scheme. [ABSTRACT FROM AUTHOR]

Due to the mismatched line resistance in the modular online uninterruptible power supply (UPS) systems, accurate active power and harmonic power sharing is an arduous work. To tackle this issue, this article proposes a distributed dynamic event-triggered control for the power sharing to accurately compensate the effect of mismatch among the line resistances. Benefiting from the proposed control strategy, the UPS modules adaptively regulate the virtual resistance at the fundamental and harmonic frequencies, and hence, the accurate active power and harmonic power sharing are achieved. In addition, the suggested technique allows the UPS modules to exchange information at only the event-triggered times, which greatly reduces the number of communication among the neighboring units. Furthermore, the system's stability is analyzed using a Lyapunov function. Finally, experimental case studies are provided to evaluate the performance of the proposed control strategy, showing its effectiveness in achieving the accurate power sharing, and plug-and-play capability. [ABSTRACT FROM AUTHOR]

For several reasons, particularly due to the mismatch in the feeder impedance, accurate power sharing in islanded microgrids is a challenging task. To get around this problem, a distributed event-triggered power sharing control strategy is proposed in this article. The suggested technique adaptively regulates the virtual impedances at both fundamental positive/negative sequence and harmonic frequencies and, therefore, accurately share the reactive, unbalanced, and harmonics powers among distributed generation units. The proposed method requires no information of feeder impedance and involves exchanging information among units at only event-triggered times, which reduces the communication burden without affecting the system performance. The stability and interevent interval are analyzed in this article. Finally, experimental results are presented to validate the effectiveness of the proposed scheme. [ABSTRACT FROM AUTHOR]

This article presents a reduced-order generalized proportional-integral observer based resonant super-twisting sliding mode controller (RST-SMC) for the three-phase ac–dc converters. On the contrary to utilizing the proportional-integral controller in regulating the dc-link voltage, which may cause large undershoot/overshoot under the disturbance, the proposed voltage control strategy for the dc-link has high disturbance rejection ability and the settling time has been greatly reduced. In addition, the proposed RST-SMC in the current control loop not only preserve the merits of the sliding mode controller but also achieve the current tracking without steady-state error in the stationary αβ frame. The effectiveness of the proposed method has been verified by a lab-constructed experimental prototype. [ABSTRACT FROM AUTHOR]

In this paper, a regeneration protection solution is proposed to address the dc-link overvoltage issue and the unequal power sharing in the parallel uninterruptible power supply (UPS) systems. First, a dc-link voltage protection control strategy is proposed to protect the inverter against the excessive dc-link voltage that may trigger the protection mechanism of the UPS system. In addition, an active power-sharing control strategy by regulating the virtual resistance is proposed to solve the circulating current caused by UPS regeneration issue. Finally, the feasibility of the proposed regeneration protection solution is verified by experimental results from the parallel UPS system prototype. [ABSTRACT FROM AUTHOR]

In this paper, a dc-link voltage protection (DCVP) control method is proposed to address the dc-link overvoltage issue due to power backfeeding in a parallel uninterruptible power supply (UPS) system. The proposed control method is able to protect the inverter against the excessive dc-link voltage, which increases the system reliability and robustness. Moreover, a current sharing control strategy is proposed by online regulating the virtual resistance of each UPS module. The proposed current sharing control strategy is able to address the circulating fundamental and harmonic currents caused by the line impedance mismatching or power backfeeding issue in the UPS system. In addition, an improved consensus-based distributed controller is proposed to alleviate the overshoot issue during the transient process in voltage amplitude and frequency restoration. Finally, the feasibility of the proposed methods is verified by experimental results from the parallel UPS prototypes. [ABSTRACT FROM PUBLISHER]

To regulate the dc-link voltage of three-phase ac/dc converters, an enhanced state observer-based controller is presented in this letter. The proposed controller, contrary to the traditional ones, does not require the dc-link current measurement and offers a “plug and play” capability, a rather high disturbance rejection ability and robustness against the dc-link capacitance parameter variation. The design procedure of the suggested controller is discussed, and its effectiveness is verified using experimental results. [ABSTRACT FROM AUTHOR]

In this paper, we analyze the existence and stability of equilibrium of dc micro-grids under the master-slave control (where some distributed generations (DGs) are under droop control with dual-loop (Droop-DGs) and some DGs are under MPPT control (MPPT-DGs)). Firstly, the power-flow equation of the dc micro-grids under master-slave control with CPLs is obtained. Then, we transform the solvability of the power-flow equation into the existence of a fixed point for a contraction mapping. Based on Banach's fixed point theorem, a sufficient condition to guarantee the existence of the power-flow solution in dc micro-grids is derived. The condition derived in this paper is not only useful for master-slave control but also for droop control. Besides, to calculate the power-flow solution, an iterative algorithm with exponential convergence rate is proposed. Secondly, we use a singular perturbation model to predict the qualitative behavior of the system near the equilibrium point. By analyzing eigenvalues of the boundary layer system and reduced-order system Jacobian matrix, the robust stable analytic conditions of the system are obtained. The effect of the sampling delay on the system stability is analyzed, the robust stability condition is obtained by using linear matrix inequality. The simulation results verify the correctness of the proposed conditions. The obtained conditions provide a reference for establishing a reliable dc micro-grid. [ABSTRACT FROM AUTHOR]

In this article, a novel hybrid voltage/current control scheme with low-communication burden is proposed for series-type inverters in a decentralized manner. All the inverter units are controlled by their individual local controllers without a real-time central global-communication. Among them, a few inverters serve as the current controlled inverters (CCIs) to regulate the grid current, and the rest inverters work as the voltage controlled inverters (VCIs). Under this control architecture, five main control targets are achieved: 1) frequency self-synchronization of each VCI inverter based on local current phase-angle signals; 2) fault-tolerant capability of all inverters without one-to-all-failure; 3) high disturbance-rejection-capability to grid variations; 4) adjustable grid power factor; and 5) independent power control for inverters with unbalanced power sources. As the central high-bandwidth communication is avoided, it has the features of decreased cost, increased scalability, and reduced geographic restrictions of inverters. Compared with conventional decentralized approaches, only a few CCI units acquire the grid phase-angle signal to achieve grid synchronization by communication, and the most VCI units are local self-synchronization via the local line-current-phase signal rather than real-time grid-voltage-phase communication signal. Thus, the proposed control can be realized with a very low-communication burden, which is more cost-effective and higher reliability in terms of communication faults. The feasibility of the proposed method is verified by experimental results of eight different cases, such as source power change, large power gap, grid voltage/frequency deviation, grid harmonics, and one-fault redundancy. [ABSTRACT FROM AUTHOR]

A virtual synchronous generator (VSG) control based on adaptive virtual inertia is proposed to improve dynamic frequency regulation of microgrid. When the system frequency deviates from the nominal steady-state value, the adaptive inertia control can exhibit a large inertia to slow the dynamic process and, thus, improve frequency nadir. And when the system frequency starts to return, a small inertia is shaped to accelerate system dynamics with a quick transient process. As a result, this flexible inertia property combines the merits of large inertia and small inertia, which contributes to the improvement of dynamic frequency response. The stability of the proposed algorithm is proved by Lyapunov stability theory, and the guidelines on the key control parameters are provided. Finally, both hardware-in-the-loop and experimental results demonstrate the effectiveness of the proposed control algorithm. [ABSTRACT FROM AUTHOR]

This study proposes a decentralized coordination control scheme for series-connected H-bridge rectifiers. Each rectifier module is controlled as a voltage-controlled source by a local controller, which needs only individual information. The local controller is composed of an active power-frequency (P-ω) control and a fixed voltage amplitude control. Compared to the conventional methods based multi-level phase-shifting modulation where centralized controller is needed, the proposed control strategy allows indefinite modular expansion without increasing the computational load of the local controller. Therefore, it has decreased cost and increased scalability. The synchronization mechanism of series modules is analyzed and the stability of the system is proved. The feasibility of the proposed strategy is verified by experimental results. [ABSTRACT FROM AUTHOR]