Search

Summary The arc fault characteristics of certain loads lack significance, making it difficult to efficiently detect the line current characteristics. This research presents a novel approach for detecting arc faults using a combination of principalc analysis (PCA) and Random Forest (RF) based on voltage measurements. The time‐domain eigenvalues of the load terminal voltages of single and mixed loads are initially extracted during both arc fault and normal operation. Principal component analysis is then conducted on a subset of these eigenvalues. The skewness and magnitude features of the resulting principal components and load terminal voltages are utilized as inputs for the Random Forest algorithm. After training the model, classification results are obtained. Ultimately, it is contrasted with techniques such as rime optimization algorithm‐multilayer perceptron (RIME‐MLP), convolutional neural network‐gated recurrent unit‐SE attention (CNN‐GRU‐SE), and Kepler optimization algorithm‐support vector machine (KOA‐SVM). The results demonstrated that the approach exhibits superior accuracy and a reduced false alarm rate. [ABSTRACT FROM AUTHOR]

This paper proposes a centralized-decentralized control strategy for regenerative braking energy utilization and power quality improvement in the modified AC-fed railway system with energy-storage-based smart electrical infrastructure. The proposal of a centralized-decentralized control strategy can enhance the ability to withstand and rapidly recover from disruptions, thus providing further guarantees for safe and reliable operation and energy conservation for railway systems. First of all, the description and control strategy of the modified railway system are outlined, and then the control principles and implementation process of the centralized control and decentralized control strategies are given. Moreover, a method of load power detection and regulated power reference calculation is proposed. Finally, the effectiveness of the proposed strategy is verified in a case of a modified railway system consisting of four traction substations and eight power supply sections. The results demonstrate that regenerative braking energy can be efficiently utilized in railways and that power quality can be improved using the proposed centralized-decentralized control strategy. [ABSTRACT FROM AUTHOR]

With respect to the problems of great impact on the utility grid, the increasing catenary voltage, the limited utilization rate of the regenerative braking energy (RBE) and the irreducible cost of electricity for locomotives caused by the RBE generated by electric locomotives of the whole railway line cannot be fully utilized in traction power supply systems. An energy management system (EMS) integrating electrical energy and information is proposed in this paper. A corresponding optimization algorithm is also proposed to calculate the distribution of the regenerative braking power in the whole railway line. The structure and working principle of the EMS are introduced. The basic principle and detailed steps of the proposed algorithm are given. Finally, the optimization calculation and simulation are carried out, the effectiveness and feasibility of the proposed EMS and the optimization algorithm are verified. [ABSTRACT FROM AUTHOR]

This paper presents a modified power supply system based on the current alternating current (AC)-fed railways with neutral zones that can further improve the eco-friendliness and smart level of railways. The modified system complements the existing infrastructure with additional energy-storage-based smart electrical infrastructure. This infrastructure comprises power electronic devices with energy storage system connected in parallel to both sides of each neutral zone in the traction substations, power electronic devices connected in parallel to both sides of each neutral zone in section posts, and an energy management system. The description and functions of such a modified system are outlined in this paper. The system allows for the centralized- and distributed-control of different functions via an energy management system. In addition, a control algorithm is proposed, based on the modified system for regenerative braking energy utilization. This would ensure that all the regenerative braking energy in the whole railway electrical system is used more efficiently. Finally, a modified power supply system with eight power supply sections is considered to be a case study; furthermore, the advantages of the proposed system and the effectiveness of the proposed control algorithm are verified. [ABSTRACT FROM AUTHOR]

Owing to the shortcomings of existing series arc fault detection methods, based on a summary of arc volt–ampere characteristics, the change rule of the line current and the relationship between the voltage and current are deeply analyzed and theoretically explained under different loads when series arc faults occur. A series arc fault detection method is proposed, and the software flowchart and principles of the applied hardware implementation are given. Finally, a prototype of an arc fault detection device (AFDD) with a rated voltage of 220 V and a rated current of 40 A is developed. The prototype was tested according to experimental methods provided by the Chinese national standard, GB/T 31143-2014. The experimental results show that the proposed detection method is simple and practical, and can be implemented using a low-cost microprocessor. The proposed method will provide good theoretical guidance in promoting the research and development of an AFDD. [ABSTRACT FROM AUTHOR]

AC heavy-haul trains produce a huge amount of regenerative braking energy when they run on long downhill sections. If this energy can be used by uphill trains in the same power supply section, a reduction in coal transportation cost and an improvement in power quality would result. To accurately predict the energy consumption and regenerative braking energy of heavy-haul trains on large long slopes, a single-particle model of train dynamics was used. According to the theory of railway longitudinal section simplification, the energy consumption and the regenerative braking energy model of a single train based on the train attributes, line conditions, and running speed was established. The model was applied and verified on the Shenshuo Railway. The results indicate that the percentage error of the proposed model is generally less than 10%. The model is a convenient and simple research alternative, with strong engineering feasibility. Based on this foundation, a model of train energy consumption was established under different interval lengths by considering the situation of regenerative braking energy in the multi-train operation mode. The model provides a theoretical foundation for future train diagram layout work with the goal of reducing the total train energy consumption. [ABSTRACT FROM AUTHOR]

In order to effectively compensate negative sequence current (NSC) of the V/v traction system and reduce the capacity and cost of railway power conditioner (RPC), a low-cost hybrid railway power conditioner (HRPC) technology scheme considering regenerative braking energy is proposed in this paper. The proposed HRPC consists of an RPC with a modular multilevel converter structure (MMC-RPC) and a railway static var compensator (RSVC). First, the circuit topology of the proposed scheme and the principle of NSC compensation considering regenerative braking energy are given. Then, the capacity configurations of MMC-RPC and RSVC are presented to reduce the capacity of active equipment and further lower the investment cost of HRPC. On this basis, the HRPC with energy storage units (ESU-HRPC) is studied to recycle the remaining regenerative braking energy, and the difference from the proposed HRPC is further analyzed. Subsequently, the capacities of HRPC and ESU-HRPC are designed based on the measured power data from a heavy-haul railway in China as an example. Besides, the system control strategy is given. Finally, the proposed technical schemes are verified by the hardware in loop (HIL) experiments. [ABSTRACT FROM AUTHOR]