Search

Abstract Objective To explore the feasibility of applying CT Hounsfield Units (HUs) for the assessment of preoperative paraspinal muscle fat infiltration (FI) in different segments in patients who underwent anterior cervical discectomy and fusion (ACDF). To compare the consistency of preoperative paraspinal muscle FI evaluations using MRI and those via CT HUs in patients who underwent ACDF surgery. Methods Ninety-five patients (45 males and 50 females, aged 37‒71 years) who received CT and MRI examinations and underwent ACDF surgery were retrospectively analyzed. In the axial T2-weighted MR images at the median level of the C3/4, C4/5, and C5/6 segments, regions of interests (ROIs) were delineated along the boundaries of the cervical multifidus (MF) and semispinalis cervicis (Scer) muscles. Using the threshold tool in ImageJ software, areas of fat tissue and intermuscular septa within the ROI were quantified. The effective cross-sectional area (ECSA) for each side was obtained by subtracting the areas of fat tissue and intermuscular septa from the total ROI area. The ratio of the fat tissue area to the CSA was then calculated to determine the initial FI value. The depth of subcutaneous fat from the midline spinous process to the epidermis at the median plane of the C4/5 intervertebral disc was measured. The initial FI values were then divided by the depth of fat to determine the post-correction FI value. Using the Picture Archiving and Communication System (PACS), at identical segments and planes, ROIs were delineated using the same method as in MRI under a standard soft tissue window (width of 500 HU, level of 60 HU). The CT HU values were measured within these defined areas. The CT HU values from both sides are summed to obtain the total HU value for the segment. According to whether the measurement results of two sets of data follow a normal distribution, Pearson’s test or Sperman’s test was used to analyze the correlation. Results On MRI, a statistically significant difference was observed in the post-correction FI only at the C3/4 segment compared to the other two segments (P 0.05). The CT HU results showed a substantial discrepancy between C3/4 and C4/5 segments and between C3/4 and C5/6 segments (P 0.05). The consistency analysis revealed a relatively strong correlation between the post-correction FI and CT HU values of the C3/4 and C4/5 segments. Furthermore, a strong correlation was detected in the variations in the measurement outcomes at the C5/6 segment. Conclusion Patients requiring surgical treatment for the cervical spine exhibit varying degrees of FI in paraspinal muscles across different locations and segments. Evaluating the degree of FI in the paraspinal muscles of the cervical spine through CT HU values is feasible. There is considerable consistency between the post-correction FI assessed under MRI and the measurements of CT HU values in evaluating the FI of paraspinal muscles in the cervical spine.

Abstract Background Sacral screw loosening is a typical complication after internal fixation surgery through the vertebral arch system. Bicortical fixation can successfully prevent screw loosening, and how improving the rate of bicortical fixation is a challenging clinical investigation. Objective To investigate the feasibility of improving the double corticality of sacral screws and the optimal fixation depth to achieve double cortical fixation by combining the torque measurement method with bare hands. Methods Ninety-seven cases of posterior lumbar internal fixation with pedicle root system were included in this study. Based on the tactile feedback of the surgeon indicating the expected penetration of the screw into the contralateral cortex of the sacrum, the screws were further rotated by 180°, 360°, or 720°, categorized into the bicortical 180° group, bicortical 360° group, and bicortical 720° group, respectively. Intraoperatively, the torque during screw insertion was recorded. Postoperatively, the rate of double-cortex engagement was evaluated at 7 days, and screw loosening was assessed at 1 year follow-up. Results The bicortical rates of the 180° group, 360° group, and 720° group were 66.13%, 91.18% and 93.75%, respectively. There were statistically significant differences between the 180° group and both the 360° and 720° groups (P 0.05).The rates of loosening of sacral screws in the 180° group, 360° group, and 720° group were 20.97%, 7.35% and 7.81%, respectively. There were statistically significant differences between the 180° group and both the 360° and 720° groups (P 0.05). The bicortical 360° group achieved a relatively satisfactory rate of dual cortical purchase while maintaining a lower rate of screw loosening. Conclusion Manual insertion of sacral screws with the assistance of a torque measurement device can achieve a relatively satisfactory dual cortical purchase rate while reducing patient hospitalization costs.

Objective To investigate the correlation between magnetic resonance imaging-based vertebral bone quality (VBQ) score and screw loosening after dynamic pedicle screw fixation with polyetheretherketone (PEEK) rods, and evaluate its predictive value. Methods A retrospective analysis was conducted on the patients who underwent dynamic pedicle screw fixation with PEEK rods from March 2017 to June 2022. Data on age, sex, body mass index, hypertension, diabetes, hyperlipidemia history, long-term smoking, alcohol consumption, VBQ score, L1–4 average Hounsfield unit (HU) value, surgical fixation length, and the lowest instrumented vertebra were collected. Logistic regression analysis was employed to assess the relationship between VBQ score and pedicle screw loosening (PSL). Results A total of 24 patients experienced PSL after surgery (20.5%). PSL group and non-PSL group showed statistical differences in age, number of fixed segments, fixation to the sacrum, L1–4 average HU value, and VBQ score (p < 0.05). The VBQ score in the PSL group was higher than that in the non-PSL group (3.56 ± 0.45 vs. 2.77 ± 0.31, p < 0.001). In logistic regression analysis, VBQ score (odds ratio, 3.425; 95% confidence interval, 1.552–8.279) were identified as independent risk factors for screw loosening. The area under the receiver operating characteristic curve for VBQ score predicting PSL was 0.819 (p < 0.05), with the optimal threshold of 3.15 (sensitivity, 83.1%; specificity, 80.5%). Conclusion The VBQ score can independently predict postoperative screw loosening in patients undergoing lumbar dynamic pedicle screw fixation with PEEK rods, and its predictive value is comparable to HU value.

Objective To systematically review relevant animal models of disk degeneration induced through the endplate injury pathway and to provide suitable animal models for exploring the intrinsic mechanisms and treatment of disk degeneration.Design PubMed, Web of Science, Cochrane and other databases were searched for literature related to animal models of disk degeneration induced by the endplate injury pathway from establishment to August 2024, and key contents in the literature were screened and extracted to analyze and evaluate each type of animal model using the literature induction method.Results Fifteen animal experimental studies were finally included in the literature, which can be categorized into direct injury models and indirect injury models, of which direct injury models include transvertebral injury models and transpedicular approach injury models, and indirect injury models include endplate ischemia models and vertebral fracture-induced endplate injury models. The direct injury models have a minimum observation period of 2 months and a maximum of 32 wk. All direct injury models were successful in causing disk degeneration, and the greater the number of interventions, the greater the degree of disk degeneration caused. The observation period for the indirect injury models varied from 4 wk to 70 wk. Of the 9 studies, only one study was unsuccessful in inducing disk degeneration, and this was the first animal study in this research to attempt to intervene on the endplate to cause disk degeneration.Conclusion The damage to the direct injury model is more immediate and controllable in extent and can effectively lead to disk degeneration. The indirect injury models do not directly damage the endplate structure, making it easier to observe the physiological and pathological condition of the endplate and associated structures of the disk. None of them can completely simulate the corresponding process of endplate injury-induced disk degeneration in humans, and there is no uniform clinical judgment standard for this type of model. The most appropriate animal model still needs further exploration and discovery.

Abstract Background Stem cell sheet implantation offers a promising avenue for spinal cord injury (SCI) and is currently under investigation in pre-clinical in vivo studies. Nevertheless, a systematic review of the relevant literature is yet to be performed. Thus, this systematic review aims to explore the efficacy of stem cell sheet technology in treating SCI, as indicated by experimental animal model studies. Methods We searched PubMed, EMBASE, and Web of Science. Manuscripts that did not pertain to in vivo pre-clinical studies and those published in non-English languages were excluded. A risk assessment for bias was performed using the SYRCLE tool. Extracted data were synthesized only qualitatively because the data were not suitable for conducting the meta-analysis. Results Among the 847 studies retrieved from electronic database searches, seven met the inclusion criteria. Six of these studies employed a complete transection model, while one utilized a compression model. Stem cell sources included bone marrow mesenchymal stem cells, stem cells from human exfoliated deciduous teeth, and adipose-derived mesenchymal stem cells. In all included studies, stem cell sheet application significantly improved motor and sensory functional scores compared to intreated SCI rats. This functional recovery correlated with histological improvements at the injury site. All studies are at low risk of bias but certain domains were not reported by some or all of the studies. Conclusion The results of our systematic review suggest that stem cell sheets may be a feasible therapeutic approach for the treatment of SCI. Future research should be conducted on stem cell sheets in various animal models and types of SCI, and careful validation is necessary before translating stem cell sheets into clinical studies.

ObjectiveThis research employed a network meta-analysis (NMA) to examine the effectiveness of five traditional Chinese medicine (TCM) monomers for promoting motor function recovery in rats with blunt spinal cord injury (SCI).MethodsWangfang, China National Knowledge Infrastructure, Web of Science, Embase, Chinese Scientific Journal Database, PubMed, and the Chinese Biomedical Literature Databases were searched for retrieving relevant articles published from their inception to December 2022. Two reviewers performed screening of search results, data extraction, and literature quality assessment independently.ResultsFor this meta-analysis, 59 publications were included. Based on the recovery of motor function at weeks 1, 2, 3, and 4 in NMA, almost all TCM groups had significantly increased positive effects than the negative control animals. In terms of cumulative probability, the tanshinone IIA (TIIA) group ranked first in restoring motor function in the first week after blunt SCI, and the resveratrol (RSV) group ranked first during the last 3 weeks.ConclusionThe NMA revealed that TCM monomers could effectively restore motor function in the rat model of blunt SCI. In rats with blunt SCI, TIIA may be the most effective TCM monomer during the first week, whereas RSV may be the most effective TCM monomer during the last 3 weeks in promoting motor function recovery. For better evidence reliability in preclinical investigations and safer extrapolation of those findings into clinical settings, further research standardizing the implementation and reporting of animal experiments is required.Systematic Review Registrationhttps://inplasy.com/, identifier INPLASY202310070.