Search

Protein electrophoresis and immunoblotting are indispensable analytical tools for the characterization of proteins and posttranslational modifications in complex sample matrices. Owing to the lack of automation, commonly employed slab-gel systems suffer from high time demand, significant sample/antibody consumption, and limited reproducibility. To overcome these limitations, we developed a paper-based open microfluidic platform for electrophoretic protein separation and subsequent transfer to protein-binding membranes for immunoprobing. Electrophoresis microstructures were digitally printed into cellulose acetate membranes that provide mechanical stability while maintaining full accessibility of the microstructures for consecutive immunological analysis. As a proof-of-concept, we demonstrate separation of fluorescently labeled marker proteins in a wide molecular weight range (15-120 kDa) within only 15 min, reducing the time demand for the entire workflow (from sample preparation to immunoassay) to approximately one hour. Sample consumption was reduced 10- to 150-fold compared to slab-gel systems, owing to system miniaturization. Moreover, we successfully applied the paper-based approach to complex samples such as crude bacterial cell extracts. We envisage that this platform will find its use in protein analysis workflows for scarce and precious samples, providing a unique opportunity to extract profound immunological information from limited sample amounts in a fast fashion with minimal hands-on time.

In tissue engineering applications, vascularization can be accomplished by coimplantation of tissue forming cells and endothelial cells (ECs), whereby the latter are able to form functional blood vessels. The use of three-dimensional (3D) bioprinting technologies has the potential to improve the classical tissue engineering approach because these will allow the generation of scaffolds with high spatial control of endothelial cell allocation. This study focuses on a side by side comparison of popular commercially available bioprinting hydrogels (Matrigel, fibrin, collagen, gelatin, agarose, Pluronic F-127, alginate, and alginate/gelatin) in the context of their physicochemical parameters, their swelling/degradation characteristics, their biological effects on vasculogenesis-related EC parameters and their printability. The aim of this study was to identify the most suitable hydrogel or hydrogel combination for inkjet printing of ECs to build prevascularized tissue constructs. Most tested hydrogels displayed physicochemical characteristics suitable for inkjet printing. However, Pluronic F-127 and the alginate/gelatin blend were rapidly degraded when incubated in cell culture medium. Agarose, Pluronic F-127, alginate and alginate/gelatin hydrogels turned out to be unsuitable for bioprinting of ECs because of their non-adherent properties and/or their incapability to support EC proliferation. Gelatin was able to support EC proliferation and viability but was unable to support endothelial cell sprouting. Our experiments revealed fibrin and collagen to be most suitable for bioprinting of ECs, because these hydrogels showed acceptable swelling/degradation characteristics, supported vasculogenesis-related EC parameters and showed good printability. Moreover, ECs in constructs of preformed spheroids survived the printing process and formed capillary-like cords. © 2017 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 106A: 935-947, 2018.

Mesenchymal stem cells (MSCs) represent a very attractive cell source for tissue engineering applications aiming at the generation of artificial bone substitutes. The use of three-dimensional bioprinting technologies has the potential to improve the classical tissue engineering approach because bioprinting will allow the generation of hydrogel scaffolds with high spatial control of MSC allocation within the bioprinted construct. In this study, we have performed direct comparisons between commercially available hydrogels in the context of their cytocompatibility toward MSCs and their physicochemical parameters with the aim to identify the most suitable hydrogel for drop-on-demand (DoD) printing of MSCs. In this context, we examined matrigel, fibrin, collagen, gelatin, and gelatin/alginate at various hydrogel concentrations. Matrigel, fibrin, collagen, and gelatin were able to support cell viability, but the latter showed a limited potential to promote MSC proliferation. We concentrated our study on fibrin and collagen hydrogels and investigated the effect of hydroxyapatite (HA) inclusion. The inclusion of HA enhanced proliferation and osteogenic differentiation of MSCs and prevented degradation of fibrin in vitro. According to viscosity and storage moduli measurements, HA-blends displayed physicochemical characteristics suitable for DoD printing. In bioprinting experiments, we confirmed that fibrin and collagen and their respective HA-blends represent excellent hydrogels for DoD-based printing as evidenced by high survival rates of printed MSCs. © 2017 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 105A: 3231-3241, 2017.

Gel electrophoresis is one of the most applied and standardized tools for separation and analysis of macromolecules and their fragments in academic research and in industry. In this work we present a novel approach for conducting on-demand electrophoretic separations of DNA molecules in open microfluidic (OM) systems on planar polymer substrates. The approach combines advantages of slab gel, capillary- & chip-based methods offering low consumable costs (

Mesenchymal stem cells (MSCs) represent a very attractive cell source for tissue engineering applications aiming at the generation of artificial bone substitutes. The use of three-dimensional bioprinting technologies has the potential to improve the classical tissue engineering approach because bioprinting will allow the generation of hydrogel scaffolds with high spatial control of MSC allocation within the bioprinted construct. In this study, we have performed direct comparisons between commercially available hydrogels in the context of their cytocompatibility toward MSCs and their physicochemical parameters with the aim to identify the most suitable hydrogel for drop-on-demand (DoD) printing of MSCs. In this context, we examined matrigel, fibrin, collagen, gelatin, and gelatin/alginate at various hydrogel concentrations. Matrigel, fibrin, collagen, and gelatin were able to support cell viability, but the latter showed a limited potential to promote MSC proliferation. We concentrated our study on fibrin and collagen hydrogels and investigated the effect of hydroxyapatite (HA) inclusion. The inclusion of HA enhanced proliferation and osteogenic differentiation of MSCs and prevented degradation of fibrin in vitro. According to viscosity and storage moduli measurements, HA-blends displayed physicochemical characteristics suitable for DoD printing. In bioprinting experiments, we confirmed that fibrin and collagen and their respective HA-blends represent excellent hydrogels for DoD-based printing as evidenced by high survival rates of printed MSCs. © 2017 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 105A: 3231-3241, 2017.

In tissue engineering applications, vascularization can be accomplished by coimplantation of tissue forming cells and endothelial cells (ECs), whereby the latter are able to form functional blood vessels. The use of three-dimensional (3D) bioprinting technologies has the potential to improve the classical tissue engineering approach because these will allow the generation of scaffolds with high spatial control of endothelial cell allocation. This study focuses on a side by side comparison of popular commercially available bioprinting hydrogels (Matrigel, fibrin, collagen, gelatin, agarose, Pluronic F-127, alginate, and alginate/gelatin) in the context of their physicochemical parameters, their swelling/degradation characteristics, their biological effects on vasculogenesis-related EC parameters and their printability. The aim of this study was to identify the most suitable hydrogel or hydrogel combination for inkjet printing of ECs to build prevascularized tissue constructs. Most tested hydrogels displayed physicochemical characteristics suitable for inkjet printing. However, Pluronic F-127 and the alginate/gelatin blend were rapidly degraded when incubated in cell culture medium. Agarose, Pluronic F-127, alginate and alginate/gelatin hydrogels turned out to be unsuitable for bioprinting of ECs because of their non-adherent properties and/or their incapability to support EC proliferation. Gelatin was able to support EC proliferation and viability but was unable to support endothelial cell sprouting. Our experiments revealed fibrin and collagen to be most suitable for bioprinting of ECs, because these hydrogels showed acceptable swelling/degradation characteristics, supported vasculogenesis-related EC parameters and showed good printability. Moreover, ECs in constructs of preformed spheroids survived the printing process and formed capillary-like cords. © 2017 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 106A: 935-947, 2018.

Gel electrophoresis is one of the most applied and standardized tools for separation and analysis of macromolecules and their fragments in academic research and in industry. In this work we present a novel approach for conducting on-demand electrophoretic separations of DNA molecules in open microfluidic (OM) systems on planar polymer substrates. The approach combines advantages of slab gel, capillary- and chip-based methods offering low consumable costs (0.1$) circumventing cost-intensive microfluidic chip fabrication, short process times (5 min per analysis) and high sensitivity (4 ng/μL dsDNA) combined with reasonable resolution (17 bases). The open microfluidic separation system comprises two opposing reservoirs of 2-4 μL in volume, a semi-contact written gel line acting as separation channel interconnecting the reservoirs and sample injected into the line via non-contact droplet dispensing and thus enabling the precise control of the injection plug and sample concentration. Evaporation is prevented by covering aqueous structures with PCR-grade mineral oil while maintaining surface temperature at 15°C. The liquid gel line exhibits a semi-circular cross section of adaptable width (∼200-600 μm) and height (∼30-80 μm) as well as a typical length of 15-55 mm. Layout of such liquid structures is adaptable on-demand not requiring time consuming and repetitive fabrication steps. The approach was successfully demonstrated by the separation of a standard label-free DNA ladder (100-1000 bp) at 100 V/cm via in-line staining and laser induced fluorescent end-point detection using an automated prototype.

Polyacrylamide usually is the material of choice for electrophoretic separation in slab gels, capillaries, and microfluidic devices. So far its polymerization requires anaerobic environments because oxygen impurities inhibit or even terminate the polymerization reaction of acrylamide. Here, it is demonstrated that gel precursor solutions with glycerol contents above 20 vol% enable direct atmospheric photopolymerization of acrylamide with no need for sealing or degassing the solution in advance. The positive effect of glycerol on the polymerization reaction is proven by simulation-validated electron paramagnetic resonance measurements. Nuclear magnetic resonance reveals that glycerol does not interfere with the reaction indicating that the observed enhancement in polymerization is owed to the low oxygen solubility of aqueous glycerol mixtures. Glycerol concentrations of >60 vol% in the gel precursor solution enable complete polymerization of volumes down to 5 nL within less than 5 s. This enables using liquid handling robots to fabricate channel-free open microfluidic structures of solid polyacrylamide hydrogel in a low-cost automated manner in a standard lab environment.

We report a new approach to perform on-demand electrophoretic separation of DNA. In contrast to standard chip-based capillary electrophoresis in micromachined glass chips, we apply a planar polyimide substrate, write 200 μm wide gel lines bridging two Pt-electrodes and inject 500 pl sample volumes in non-contact manner. The gel is covered with mineral oil to inhibit evaporation. Subsequently, an electrical field is applied for 80 s and the separation of the DNA molecules (56 bp-Cy5 and 112 bp-Cy5, 10 μM) is successfully demonstrated.

Microfluidic systems fabricated in polydimethylsiloxane (PDMS) enable a broad variety of applications and are widespread in the field of Lab-on-a-Chip. Here we demonstrate semi-contact-writing, a novel method for fabrication of polymer based molds for casting microfluidic PDMS chips in a highly flexible, time and cost-efficient manner. The method is related to direct-writing of an aqueous polymer solution on a planar glass substrate and substitutes conventional, time- and cost-consuming UV-lithography. This technique facilitates on-demand prototyping in a low-cost manner and is therefore ideally suited for rapid chip layout iterations. No cleanroom facilities and less expertise are required. Fabrication time from scratch to ready-to-use PDMS-chip is less than 5?h. This polymer writing method enables structure widths down to 140 ?m and controllable structure heights ranging from 5.5 ?m for writing single layers up to 98 ?m by stacking. As a unique property, freely selectable height variations across a substrate can be achieved by application of local stacking. Furthermore, the molds exhibit low surface roughness (R a ??=??24?nm, R RMS??=??28?nm) and high fidelity edge sharpness. We validated the method by fabrication of molds to cast PDMS chips for droplet based flow-through PCR with single-cell sensitivity.

This paper describes a process sequence for the fabrication of all-polymer microfluidic chips based on the multilayer lamination of TMMF dry resist (TOK, Japan) on a pre-patterned PMMA substrate. The sequence provides a simple way to meet major microfluidic requirements like the fabrication of embedded microchannels, nozzles and interconnecting vias as well as their accurate integration into a chip-interface without additional materials and bonding procedures. We demonstrate the applicability of the sequence by manufacturing and testing a 24-channel TopSpot printhead. Additionally, non-cytotoxicity of TMMF was confirmed in cell culture experiments and different methods for surface modification were investigated.

We demonstrate the use of photosensitive epoxy laminate TMMF S2045 for the fabrication and sealing of tapered microfluidic channels. The 45 μm thick resist enables the fabrication of shallow sealed cavities featuring extreme aspect ratios of less than 1:40 (h = 45 μm, w = 2000 μm). It also provides high resolution and enables minimum feature sizes of 10 μm. For the fabrication of free-standing structures, an aspect ratio of up to 7:1 was achieved. The dry-film photoresist can be applied easily by lamination onto structured substrates. The total thickness variation of the resist across a 100 mm wafer was determined to be less than ±0.6 μm. Process parameters for the fabrication and sealing of various micro-channels are discussed and optimized in this paper. The main focus was to minimize thermal impact during lamination, soft-bake, exposure and post–exposure bake, which could lead to lid sagging or channel clogging due to liquefaction of uncured resist. We tested TMMF according to ISO 10995-5 and found it to be non-cytotoxic, enabling its use for biological applications. Swelling of less than 5% for incubation of the dry-film resist in several biologically relevant solvents, buffers and cleaning solutions was observed. (Some figures in this article are in colour only in the electronic version)

We investigate TMMF photopolymer as a cost-efficient alternative to glass for the leak-tight sealing of high-density silicon microchannels. TMMF enables low temperature sealing and access to structures underneath via lamination and standard UV-lithography instead of costly glass machining and anodic bonding. TMMF is highly transparent and has a low autofluorescence for wavelengths larger than 400 nm. As the photopolymer is too thin for implementing bulky world-to-chip interfaces, we propose adhesive bonding of cyclic olefin copolymer (COC) modules. All materials were tested according ISO 10993-5 and showed no cytotoxic effects on the proliferation of L929 cells. To quantify the cost efficiency of the proposed techniques, we used an established silicon/Pyrex nanoliter dispenser as a reference and replaced structured Pyrex wafers by TMMF laminates and COC modules. Thus, consumable costs, manpower and machine time related to sealing of the microchannels and implementing the world-to-chip interface could be significantly reduced. Leak tightness was proved by applying a pressure of 0.2 MPa for 5 h without delamination or crosstalk between neighboring microchannels located only 100 µm apart. In contrast to anodic bonding, the proposed techniques are tolerant to surface inhomogeneities. They enable manufacturing of silicon/polymer microfluidics at lower costs and without compromising the performance compared to corresponding silicon/glass devices.