Search

The use of wood as a bioenergetic source requires knowledge of its technical properties. The rubber tree Hevea brasiliensis has an economic life cycle of 25 to 30 years in Brazil. It is used for extracting rubber and generating residual wood for fuel. Our goal was to characterize the wood quality of 10 clonal progenies as a source of raw material for bioenergy. Ten clonal progenies of 12-year-old Hevea brasiliensis from an experimental planting in Selvíria municipality were evaluated. Three trees per clone were evaluated for individual properties of Higher Heating Value, immediate chemical analysis, chemical composition, fiber dimensions, thermogravimetric analysis of wood under nitrogen atmosphere and Fourier Transform Infrared Spectroscopy analysis. We highlight clone IAC 311 for fuel because it presents elevated Higher Heating Value and fixed carbon and less volatile material. However, the other genetic materials studied also meet the specifications for energy use and can be highly viable given their physical, chemical, energy, and thermal properties. [ABSTRACT FROM AUTHOR]

Our goal was to determine physical properties and anatomical features in 33-year-old Hevea brasiliensis clones. We cut wood samples from clones LCB510, RRIM600, IAN873, IAN717 and GT1 planted in Selvíria, Mato Grosso do Sul, Brazil. We used standard techniques in wood studies. We found that clones differ in basic density, volumetric shrinkage and anatomical features, with the exception of ray width. Basic density, volumetric shrinkage, fiber length, fiber wall thickness, vessel element length and vessel diameter tended to increase from pith to bark, while vessel frequency propended to decrease. We conclude that wood of the studied clones has potential for industrial use. [ABSTRACT FROM AUTHOR]

Copyright of Colombia Forestal is the property of Colombia Forestal and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Average wood density of 38-year-old Cariniana legalis (Mart.) Kuntze, a Brazilian native forest species, was found to increase with faster growth and lower stocking, while decreasing from pith to bark. A complete randomised block design was planted with five blocks. Ten trees were harvested in each of three spacing treatments. We hypothesised that the stand stemwood production would not significantly differ depending on tree spacing. However, tree growth would be higher in the wider spacing and wood density would be higher in the narrower spacing. The diameter growth of trees was higher at 3 m × 2.5 m than at 3 m × 2 m and 3 m × 1.5 m. Nevertheless, this higher individual tree growth at 3 m × 2.5 m did not compensate for the greater tree stock density at 3 m × 1.5 m with stand stemwood production at 38 years of 530 m3 ha−1 and 649 m3 ha−1, respectively. These results suggest that C. legalis, which can produce up to 17 m3 ha−1 y−1 of medium-to high-density timber - about 800 kg m−3 - is a promising native species for forest plantations in Brazil. [ABSTRACT FROM AUTHOR]

We studied the relationships among wood anatomy, hydraulic conductivity, density and shear parallel to the grain in the stem of Handroanthus vellosoi trees with the goal to identify possible trade-offs between hydraulic conductivity and mechanical properties. For this study we felled 12 trees with 24-year-old and cut 10-cm-thick disks at three heights: base of the trunk, one meter in height, and two meters in height. We propose that the relationship between hydraulic conductivity and mechanical resistance found along the H. vellosoi trunk indicates greater mechanical investment in the wood at the base of the trunk compared with the other two heights (1 and 2 meters). Anatomically, this would be represented by smaller diameter vessels and fibers with thicker walls. Consequently, strength investment implies lower water conductivity at the stem base. However, more studies are needed to determine whether this lower value with respect to 1 and 2 meters represents a significant effect on water transport along the stem. [ABSTRACT FROM AUTHOR]

The wood anatomy of the root, stem (base, middle, top) and branch of Anadenanthera peregrina, Copaifera langsdorffii, Handroanthus ochraceus, Ocotea corymbosa and Xylopia aromatica growing naturally in the Brazilian Cerrado is investigated. The important findings are correlated with hydraulic architecture and mechanical requirements. The presence of hydraulic bottlenecks (also referred to as hydraulic constrictions) is evident in the transition from root to stem, but no such transition is observed from stem to branch in other four species except for Xylopia aromatica. Compared with solitary vessels, proportion of multiple vessels is higher in the roots of Anadenanthera peregrina and Copaifera langsdorffii, as well as in the roots and stem-base of Xylopia aromatica indicating a tendency toward higher safety of roots from embolism as compared to the stem. Dimensions of rays, fibers and dry biomass percentage did not clearly show variations in these cells to influence the mechanical strength. Besides reducing hydraulic conductivity, decrease in vessel diameter from the root to the stem base may also impact mechanical strength by reducing empty spaces (vessel lumen). We concluded that the wood of the stem base of the species investigated shows mechanism to safeguard from air embolism by producing narrower vessels, which can protect the main stem from constant loss of conductivity. [ABSTRACT FROM AUTHOR]