Search

In this letter, we study relay-aided networks with presence of single eavesdropper. We provide joint beamforming design of the source and relay that can minimize the overall power consumption while satisfying our predefined quality-of-service (QoS) requirements. Additionally, we investigate the case that the channel between relay and eavesdropper suffers from channel uncertainty. Finally, simulation results are provided to verify the effectiveness of our algorithm., Comment: CL

This paper studies the beamforming design problem of a multi-user downlink network, assuming imperfect channel state information known to the base station. In this scenario, the base station is equipped with multiple antennas, and each user is wiretapped by a specific eavesdropper where each user or eavesdropper is equipped with one antenna. It is supposed that the base station employs transmit beamforming with a given requirement on sum transmitting power. The objective is to maximize the sum secrecy rate of the network. Due to the uncertainty of the channel, it is difficult to calculate the exact sum secrecy rate of the system. Thus, the maximum of lower bound of sum secrecy rate is considered. The optimization of the lower bound of sum secrecy rate still makes the considered beamforming design problem difficult to handle. To solve this problem, a beamforming design scheme is proposed to transform the original problem into a convex approximation problem, by employing semidefinite relaxation and first-order approximation technique based on Taylor expansion. Besides, with the advantage of low complexity, a zero-forcing based beamforming method is presented in the case that base station is able to nullify the eavesdroppers' rate. When the base station doesn't have the ability, user selection algorithm would be in use. Numerical results show that the former strategy achieves better performance than the latter one, which is mainly due to the ability of optimizing beamforming direction, and both outperform the signal-to-leakage-and-noise ratio based algorithm., Comment: TIFS

In this paper, we investigate the robust beamforming schemes for a multi-user multiple-input-single-output (MU-MISO) system with per-antenna power constraints and quantized channel direction information (CDI) feedback. Our design objective is to maximize the expectation of the weighted sum-rate performance by means of controlling the interference leakage and properly allocating the power among user equipments (UEs).First, we prove the optimality of the non-robust zero-forcing (ZF) beamforming scheme in the sense of generating the minimum amount of average inter-UE interference under quantized CDI. Then we derive closed-form expressions of the cumulative density function (CDF) of the interference leakage power for the non-robust ZF beamforming scheme, based on which we adjust the leakage thresholds and propose two robust beamforming schemes under per-antenna power constraints with an iterative process to update the per-UE power allocations using the geometric programming (GP). Simulation results show the superiority of the proposed robust beamforming schemes compared with the existing schemes in terms of the average weighted sum-rate performance.

In this paper, we propose a sequential and incremental precoder design for downlink joint transmission (JT) network MIMO systems with imperfect backhaul links. The objective of our design is to minimize the maximum of the sub-stream mean square errors (MSE), which dominates the average bit error rate (BER) performance of the system. In the proposed scheme,we first optimize the precoder at the serving base station (BS), and then sequentially optimize the precoders of non-serving BSs in the JT set according to the descending order of their probabilities of participating in JT. The BS-wise sequential optimization process can improve the system performance when some BSs have to temporarily quit the JT operations because of poor instant backhaul conditions. Besides, the precoder of an additional BS is derived in an incremental way, i.e., the sequentially optimized precoders of previous BSs are fixed, thus the additional precoder plays an incremental part in the multi-BS JT operations. An iterative algorithm is designed to jointly optimize the sub-stream precoder and sub-stream power allocation for each additional BS in the proposed sequential and incremental optimization scheme. Simulations show that, under the practical backhaul link conditions, our scheme significantly outperforms the autonomous global precoding (AGP) scheme in terms of BER performance., Comment: TVT

We propose a greedy minimum mean squared error (MMSE)-based antenna selection algorithm for amplify-and-forward (AF) multiple-input multiple-output (MIMO) relay systems. Assuming equal-power allocation across the multi-stream data, we derive a closed form expression for the mean squared error (MSE) resulted from adding each additional antenna pair. Based on this result, we iteratively select the antenna-pairs at the relay nodes to minimize the MSE. Simulation results show that our algorithm greatly outperforms the existing schemes., Comment: SPL

Doubly selective (DS) channel estimation in largescale multiple-input multiple-output (MIMO) systems is a challenging problem due to the requirement of unaffordable pilot overheads and prohibitive complexity. In this paper, we propose a novel distributed compressive sensing (DCS) based channel estimation scheme to solve this problem. In the scheme, we introduce the basis expansion model (BEM) to reduce the required channel coefficients and pilot overheads. And due to the common sparsity of all the transmit-receive antenna pairs in delay domain, we estimate the BEM coefficients by considering the DCS framework, which has a simple linear structure with low complexity. Further more, a linear smoothing method is proposed to improve the estimation accuracy. Finally, we conduct various simulations to verify the validity of the proposed scheme and demonstrate the performance gains of the proposed scheme compared with conventional schemes., Comment: conference,7 pages,5 figures

In this paper, we consider a dual-hop Multiple Input Multiple Output (MIMO) relay wireless network, in which a source-destination pair both equipped with multiple antennas communicates through a large number of half-duplex amplify-and-forward (AF) relay terminals. Two novel linear beamforming schemes based on the matched filter (MF) and regularized zero-forcing (RZF) precoding techniques are proposed for the MIMO relay system. We focus on the linear process at the relay nodes and design the new relay beamformers by utilizing the channel state information (CSI) of both backward channel and forward channel. The proposed beamforming designs are based on the QR decomposition (QRD) filter at the destination node which performs successive interference cancellation (SIC) to achieve the maximum spatial multiplexing gain. Simulation results demonstrate that the proposed beamformers that fulfil both the intranode array gain and distributed array gain outperform other relaying schemes under different system parameters in terms of the ergodic capacity., Comment: 18 pages, 6 figures