Search

We investigate the chiral spectral singularities, i.e., laser threshold modes, in PT-symmetric dielectric metasurfaces originating from quasi-bound states in the continuum. The poles, referred to as the quasi-bound states in the continuum, of scattering matrix can move to the upper complex frequency plane from the lower half-plane by increasing the balanced gain and loss. The maximal intrinsic optical chirality of laser threshold mode has been theoretically demonstrated via the large transmission circular dichroism spectra. Our work paves the way for studying the enhanced optical chirality in non-Hermitian nanophotonics empowered by quasi-bound states in the continuum, together with various intriguing applications, such as chiral coherent perfect absorber and laser. [ABSTRACT FROM AUTHOR]

We experimentally demonstrate a fiber laser with different linewidths based on self-injection locking (SIL) and the stimulated Brillouin scattering effect. Based on the homemade fiber laser, the error origin, resolution, and applicable range of delayed self-heterodyne interferometry (DSHI), self-correlation envelope linewidth detection (SCELD) and Voigt fitting are investigated numerically and experimentally. The selection of the linewidth measuring method should meet the following conclusions: an approximately Lorentzian self-heterodyne spectrum without the pedestal and high-intensity sinusoidal jitter is a prerequisite for DSHI; the SCELD needs a suitable length of delay fiber for eliminating flicker noise and dark noise of the electrical spectrum analyzer; a non-Lorentzian self-heterodyne spectrum without a pedestal is an indispensable element for Voigt fitting. According to the experimental results, the laser Lorentzian linewidth of SIL changes from 1.7 kHz to 587 Hz under different injection powers. When the Brillouin erbium fiber laser is utilized, the Lorentzian linewidth is measured to be 60 ± 5 Hz. [ABSTRACT FROM AUTHOR]

Mid-infrared (MIR) pulsed lasers near a 3 µm waveband show great potential for the high absorption of water molecules and many important gas molecules. A passively Q -switched mode-locked (QSML) E r 3+ -doped fluoride fiber laser with a low laser threshold and high slope efficiency around a 2.8 µm waveband is reported. The improvement is achieved by depositing bismuth sulfide ( B i 2 S 3 ) particles onto the cavity mirror directly as a saturable absorber and using the cleaved end of the fluoride fiber as output directly. -QSML pulses begin to appear with the pump power of 280 mW. The repetition rate of the QSML pulses reaches a maximum of 33.59 kHz with the pump power of 540 mW. When the pump power is further increased, the output of the fiber laser switches from the QSML to the continuous-wave mode-locked operation with the repetition rate of 28.64 MHz and the slope efficiency of 12.2%. The results indicate that B i 2 S 3 is a promising modulator for the pulsed lasers near a 3 µm waveband, which paves the way for further development of various applications in MIR wavebands, including material processing, MIR frequency combs, and modern healthcare.